Tuthill 1LEV-C-A-88462 Pump 3.2Gpm 1/2Hp 1725Rpm 1P

Tuthill 1LEV-C-A-88513-7 Pump And Motor

Tuthill 1LEV-C-A-88494-7 Pump And Motor

Tuthill 1LEV-C-A-88520-7 Pump W/3Ph 1/2Hp Motor

Tuthill 1LEV-C-A-7 Pump 3.2Gpm Tang Shaft Cast Iron Rotary Gear Pump Pump End Only L Series Pump Cast Iron Construction NO motor Has Internal Relief Valve. Relief valve is set at 55 PSI (can be adjusted in field) Clockwise rotation only (from shaft end view) Tang Shaft Inlet Port is 1/2 inch NPT Discharge Port is 1/2 inch NPT Positive Displacement, Internal Rotary Gear Design Open Flow at 1800 RPM : 3.0 GPM at 1800 RPM Standard Discharge Pressure: up to 500 PSI Inlet Pressure: up to 280 PSI Maximum Differential Pressure: 300 PSI Temperature: up to 375 F Typical Viscosity Range: 40 to 1000 SSU

Tuthill 1LE-7 Pump 3.2Gpm 1/2"Ports Viton Cast Iron Rotary Gear Pump Pump End Only, NO motor Cast Iron Construction Inlet Port is 1/2 inch NPT, Discharge Port is 1/2 inch NPT Positive Displacement, Internal Rotary Gear Design Open Flow at 1800 RPM : 3.0 GPM at 1800 RPM Standard Discharge Pressure: up to 500 PSI Inlet Pressure: up to 280 PSI Maximum Differential Pressure: 300 PSI Temperature: up to 375 F Typical Viscosity Range: 40 to 1000 SSU

Tuthill 88514 Motor 1Ph 1/4Hp 1725Rpmtefc

Tuthill 1LEV-C-7 Pump 3.2 Gpm Cast Iron Rotary Gear Pump Pump End Only Tuthill L Series Pump Cast Iron Construction Has Internal Relief Valve Relief valve is set at 55 PSI (can be adjusted in field). Clockwise rotation only (from shaft end view) Inlet Port is 1/2 inch NPT Discharge Port is 1/2 inch NPT Positive Displacement, Internal Rotary Gear Design Open Flow at 1800 RPM : 3.0 GPM at 1800 RPM Standard Discharge Pressure: up to 500 PSI Inlet Pressure: up to 280 PSI Maximum Differential Pressure: 300 PSI Temperature: up to 375 F Typical Viscosity Range: 40 to 1000 SSU

Tuthill 2LEV-C-A-7 Pump 6.2Gpm Short Shaft Type: Internal Gear Maximum Flow Rate: 6.2 gpm Max Pressure: 300 psi Inlet/Outlet Port Sizes: 1/2 in NPT Pump Body Material: Cast Iron Wetted Materials: Steel, Carbon, Bronze, P/M Steel, Carbon O-Ring Material: Viton, Neoprene, EPR Seal: Viton Mechanical Seal

Tuthill 2LE-A-7 Pump 6.2Gpm 1/2"Ports Cast Iron Rotary Gear Pump Pump End Only L Series Pump Cast Iron Construction Tang Shaft Inlet Port is 1/2 inch NPT Discharge Port is 1/2 inch NPT Positive Displacement, Internal Rotary Gear Design Open Flow at 1800 RPM : 5.6 GPM at 1800 RPM Standard Discharge Pressure: up to 500 PSI Inlet Pressure: up to 280 PSI Maximum Differential Pressure: 300 PSI Temperature: up to 375 F Typical Viscosity Range: 40 to 1000 SSU

Oberdorfer N992Rm-J07 Gear Pump 3/8" 1/2Hp  

Oberdorfer N992RN-J51 Gear Pump 3/8" 1/2Hp Rv

Tuthill 0LEV-C-A-7 Pump Tuthill 0LEV-C-A-7 Pump with Relief valve CW rotation only with Tang Shaft Tuthill 0LE Series are compact, highly efficient, cast iron positive displacement rotary gear pumps with a mechanical seal. Pumping action is based on a rotor, idler gear, and a cover cast with a crescent-shaped partition. They are self priming and particularly suited to handle liquids of 35 to 1000 SSU viscosity. Higher viscosities can be handled at reduced speeds. The pump has a non-pulsating flow and runs substantially quieter than other pump designs.   Features : Pump Body: Cast Iron Relief Valve: Relief valve is factory set to 55 PSI for spring adjustment between 55-120 PSI. Shaft Seal: Mechanical Seal Viton Port Size: Inlet Port is 1/2 inch NPT, Discharge Port is 1/2 inch NPT.

Tuthill 1LE-A-7 Pump 3.2Gpm Short Shaft Cast Iron Rotary Gear Pump Pump End Only Cast Iron Construction Tang Shaft Inlet Port is 1/2 inch NPT, Discharge Port is 1/2 inch NPT Positive Displacement, Internal Rotary Gear Design Open Flow at 1800 RPM : 3.0 GPM at 1800 RPM Standard Discharge Pressure: up to 500 PSI Inlet Pressure: up to 280 PSI Maximum Differential Pressure: 300 PSI Temperature: up to 375 F Typical Viscosity Range: 40 to 1000 SSU

Tuthill 4C2FV-C-A-7 Gear Pump (505000) Tuthill 4C2FV-C-A-7, Cast Iron Rotary Gear Pump. Pump End Only. 36 GPM C Series. Cast Iron Construction NO motor. Flange mount. Has Internal Relief Valve. Relief valve is set at 90 PSI (can be adjusted in field). Clockwise rotation only (from shaft end view). Tang Shaft. Inlet Port is 1-1/2 inch NPT, Discharge Port is 1-1/2 inch NPT.   Features : Pump Body:Cast Iron  Relief Valve:Relief valve is factory set to 90 PSI for adjustment between 30-225 PSI. Other PSI ranges available.  Shaft Seal:Sleeve Bushing Lip Seal Viton  Port Size:Inlet Port is 1-1/2 inch NPT Discharge Port is 1-1/2 inch NPT.