|
Shurflo 8001-594-839 Pump 12V 100Sw Pvs
Pump and Motor Unit, 12 Volts DC, P/V/S 100 PSI 3.5-C
Features :
Pump Body:Nylon
Impeller:EPDM Shaft:Santoprene
Port Size:Inlet Port is 3/8 Inch-18 NPT Female, Discharge Port is 3/8 Inch-18 NPT Female.
Motor Specs :24 Volt DC, Permanent Magnet, P/N 11-127-10. Wire: 12.5 Inch x 16AWG wires with Switch.
|
143.59 |
|
|
Shurflo 8000-643-938 Pump 12V 100Sw Nbg
Diaphragm Pump with 12 Volt DC Motor and Automatic Switch. Nylon Pump Body, Buna-n Valves, Geolast Diaphragm. Inlet Port is 3/8 Inch-18 NPT, Female, Discharge Port is 3/8 Inch-18 NPT, Female.
Features :
Pump Body:Nylon
Impeller:Buna-n Shaft:Geolast
Port Size:Inlet Port is 3/8 Inch-18 NPT, Female, Discharge Port is 3/8 Inch-18 NPT, Female.
Motor Specs :12 Volt DC, Permanent Magnet, P/N 11-111-00. Wire: 12.5 Inch x 16AWG wires with Switch.
|
219.93 |
|
|
Shurflo 8007-543-850 Pump 12V 45Bp Pvs
Diaphragm Pump with 12 Volt DC Motor and 45 PSI Bypass. Polypropylene Pump Body, Viton Valves, Santoprene Diaphragm. Inlet Port is 3/8 Inch-18 NPT Female, Discharge Port is 3/8 Inch-18 NPT Female. 1.8 GPM open flow.
Features :
Pump Body:Polypropylene
Impeller:Viton Shaft:Santoprene
Port Size:Inlet Port is 3/8 Inch-18 NPT Female, Discharge Port is 3/8 Inch-18 NPT Female.
Motor Specs :12 Volt DC, Permanent Magnet, P/N 11-184-04, Fuse Protected, On/Off Switch, Connector.
|
166.09 |
|
|
SHURflo 8008-943-839 Diaphragm Pump Spectra 125 PSI Replacement Pump
This SHURflo diaphragm pump 8008-943-839 is the replacement pump for the Spectra 125 PSI Reverse Osmosis Booster Pump. Heat Sink 34-007 is recommended when using this pump with your RO system.
Spectra Low Pressure RO Replacement Pump.
|
334.46 |
|
|
Shurflo 8000-853-238 Pump 24V 100Sw Nvs 3.0S
Diaphragm Pump with 24 Volt DC Motor and 100 PSI Automatic Demand Switch. Nylon Pump Body, Viton Valves, Santoprene Diaphragm. Inlet Port is 3/8 Inch-18 NPT Female, Discharge Port is 3/8 Inch-18 NPT Female. 1.6 GPM open flow.
Features :
Pump Body:Nylon
Impeller:Viton Shaft:Santoprene
Port Size:Inlet Port is 3/8 Inch-18 NPT Female, Discharge Port is 3/8 Inch-18 NPT Female.
Motor Specs :24 Volt DC, Permanent Magnet, P/N 11-127-10. Wire: 12.5 Inch x 16AWG wires with Switch.
|
214.63 |
|
|
Shurflo 8000-953-238 Pump 24V 100Sw Nes
Diaphragm Pump with 24 Volt DC Motor and 100 PSI Automatic Demand Switch. Nylon Pump Body, EPDM Valves, Santoprene Diaphragm. Inlet Port is 3/8 Inch-18 NPT Female, Discharge Port is 3/8 Inch-18 NPT Female. 1.6 GPM open flow.
Features :
Pump Body:Nylon
Impeller:EPDM Shaft:Santoprene
Port Size:Inlet Port is 3/8 Inch-18 NPT Female, Discharge Port is 3/8 Inch-18 NPT Female.
Motor Specs :24 Volt DC, Permanent Magnet, P/N 11-127-10. Wire: 12.5 Inch x 16AWG wires with Switch.
|
216.26 |
|
|
SHURflo 2088-594-144, Diaphragm Pump 3.0 GPM 115VAC
SHURflo Diaphragm Pump Standard, 3.0 GPM Open Flow, 115VAC Intermittant Duty, Santoprene Valves, Santoprene Diaphragm, 45 PSI Demand Switch (adjustable 30-50 PSI), 1/2" MSPT Ports, Polypropylene Housing, with Power Cord and Plug. This is a great Beer Transfer Pump!
|
251.21 |
|
|
Shurflo 2088-594-154, Diaphragm Pump 3.3 GPM 115VAC
Shurflo Diaphragm Pump Standard, 3.3 GPM Open Flow, 115VAC Intermittant Duty, Santoprene Valves, Santoprene Diaphragm, 45 PSI Demand Switch (adjustable 30-50 PSI), 1/2" MSPT Ports, Polypropylene Housing, N.S.F. Listed
MODEL NUMBER: 2088-594-154
PUMP DESIGN: Positive Displacement 3 Chamber Diaphragm Pump
CHECK VALVE: (1-Way Operation) Prevents Reverse Flow
CAM: 3.0 Degree MOTOR: Permanent Magnet, P/N 11-150-10,
Thermally Protected VOLTAGE: 115 VAC Nominal
PRESSURE SWITCH: Adjustable from 30 to 50 PSI. Factory Set @ 45 PSI Shut-Off, Turn On 25 5 PSI
LIQUID TEMPERATURE: 130 Degrees Fahrenheit (54 Degrees Centigrade) Max.
PRIME: Self-Priming Up To 9.0 Ft. Vertical, Max. Inlet Pressure 30 PSI (2.1 Bar)
PORTS: 1/2" - 14 Male Parallel Thread
MATERIAL OF CONSTRUCTION: PLASTICS- Polypropylene VALVES- Santoprene DIAPHRAGM- Santoprene FASTENERS- Zinc Plated Steel
NET WEIGHT: 5.1 Lbs (2.31 Kg)
DUTY CYCLE: Intermittent (See Temp. Rise Chart) TYPICAL APPLICATIONS:
Water Delivery APPROVALS: NSF Listed, UL/CSA Recognized Component
|
217.06 |
|
|
SHURflo 34-007, Heat Sink
SHURflo Heat Sink, Attaches to Standard Motors For Extra Cooling, 5 Inches Long
This heat sink is recommended when using SHURflo 8008-943-839 Diaphragm Pump when used for a RO system.
|
34.87 |
|
|
Shurflo 8020-513-236 Pump 115V 60Sw Pvs
Shurflo- Diaphragm Pump 3 Chamber, 1.5 GPM Open Flow, 115VAC Intermittent Duty, 60 PSI Demand Switch (adjustable 40-60 PSI), Viton Valves, Santoprene Diaphragm, Polypropylene Housing, 3/8" NPT Female Ports, Has a Power Cord, UL/CSA Recognized, General Industrial Pump
|
246.75 |
|
|
Shurflo 8001-244-290 Pump 12V 80Nc Pes
Pump and Motor Unit, 12 Volts DC, P/E/S 3.5 NO/CONTROL
Features :
Pump Body:Nylon
Impeller:EPDM Shaft:Santoprene
Port Size:Inlet Port is 3/8 Inch-18 NPT Female, Discharge Port is 3/8 Inch-18 NPT Female.
Motor Specs :24 Volt DC, Permanent Magnet, P/N 11-127-10. Wire: 12.5 Inch x 16AWG wires with Switch.
|
165.92 |
|
|
SHURflo 8001-053-210, Diaphragm Pump 3 Chamber 1.8 GPM 24VDC
SHURflo Diaphragm Pump 3 Chamber, 1.8 GPM Open Flow, 24VDC, 60 PSI Bypass (no switch), Viton Valves, Geolast Diaphragm, Nylon Housing, 3/8" NPT Female Ports
|
267.12 |
|
|
Micropump GB-P23.PVS.A Pump Head A Mount
The GB Series magnetic drive gear pumps feature a suction-shoe design that self-compensates for wear, ensuring near zero slip and long pump life. Available in standard or custom configurations, GB Series pumps offer the flexibility to meet a wide range of applications with a compact size. Options include two standard gear sizes, an internal bypass, and variety of materials.
Displacement:
0.26 ml/rev (P23)
0.58 ml/rev (P25)
1.17 ml/rev (P35)
Recommended Speed Range: 500-5500 RPM
Flow Rate (min): 131 mL/min | 2.1 US gal/hr
Flow Rate (max): 6.4 L/min | 1.70 US gpm
Differential Pressure (max): 8.6 bar | 125 psi
System Pressure (max): 21 bar | 300 psi
Temperature Range: -46 to 177 °C | -50 to 351 °F
Viscosity Range: 0.5 to 1500 cP
Standard Ports: 1/8"-27 NPT(F)
|
1020.67 |
|
|
Micropump GB-P25.PVS.A-B1 Pump Head A Mount
Micropump 81281 GB-P25.PVS.A-B1 Mag-Drive Gear Pump Head, Requires A-Mount compatible Drive. 81281 constructed of Base Material 316SS, Gear Material PPS (carbon fiber/ptfe) and Shaft Material 316SS.
Pump Series: GB Series
Ports/Fittings: 1/8-27 (F) NPT Side Ports
Min Speed (RPM): 500
Max Speed (RPM): 5500
Max Pressure (psi): 300
Min Temperature (°C): -29
Max Temperature (°C): 177
Max Diff. Pressure (psi): 75
Displacement (ml/rev): 0.58
Design: Standard Design
Gear Set: 0.350/2/25 (0.58 ml/rev)
Gear Material: PPS (carbon fiber/ptfe)
Static Seals: Viton®
Base Materials: 316SS
Drive Mount: MP Housing
Bypass: Internal Bypass (316SS)
Driven: Ferrite
Driving Magnet: Not Included
High System Pressure: No
Bushings: PPS
Shafts: 316SS
Gear Trim: None
Model: GB-P25.PVS.A-B1
|
1071.22 |
|
|
Micropump GB-P35.PVS.A-B1 Pump Head A Mount
Micropump 81282 GB-P35.PVS.A-B1 Mag-Drive Gear Pump Head, Requires A-Mount compatible Drive. 81282 constructed of Base Material 316SS, Gear Material PPS (carbon fiber/ptfe) and Shaft Material 316SS.
Pump Series: GB Series
Ports/Fittings: 1/8-27 (F) NPT Side Ports
Min Speed (RPM): 500
Max Speed (RPM): 5500
Max Pressure (psi): 300
Min Temperature (°C): -29
Max Temperature (°C): 176.666666666667
Max Diff. Pressure (psi): 57.77777777777777
Displacement (ml/rev): 1.17
Design: Standard Design
Gear Set: 0.350/3/25 (1.17 ml/rev)
Gear Material: PPS (carbon fiber/ptfe)
Static Seals: Viton®
Base Materials: 316SS
Drive Mount: MP Housing
Bypass: Internal Bypass (316SS)
Driven: Ferrite
Driving Magnet: Not Included
High System Pressure: No
Bushings: PPS
Shafts: 316SS
Gear Trim: None
Model: GB-P35.PVS.A-B1
|
1308.49 |
|