|
Oberdorfer 104M Series Centrifugal Pump
FEATURES
Pump Body:
Bronze
Ports:
Inlet: 3/4" NPT
Outlet: 1/2" NPT
Flow:
24 GPM Max
Pressure:
to 23 PSI, 53 feet of head
Impeller:
Centrifugal
Shaft Seal:
Teflon Barrier Seal to Protect Motor Bearings. Carbon Face Mechanical Pump Seals. Buna Std., Viton and Teflon available.
Shaft:
416 Stainless Steel is standard, Monel Shaft available for Marine Use
Motor / Drive:
Pump heads mount to standard footed NEMA 56J jet pump motors. A wide variety of motors are available and we can assemble for you.
APPLICATIONS / CHARACTERISTICS
BRONZE CLOSE COUPLED CENTRIFUGAL PUMP
This close-coupled pump uses a standard NEMA C-Flange Jet Pump Motor with weld-on base and threaded shaft end to accept the pump impeller. The pump uses a mechanical type shaft seal with a Buna rubber element. It is suitable for water, oils, and some mild solvents and it is limited to 212 F. Viton® seals and Teflon seals (Chemlon) are available for severe solvents, difficult chemicals, and elevated temperatures.
Will Handle Contaminated Liquids. Extremely Quiet.
A Standard in the Marine Air Conditioning Industry.
Oberdorfer Centrifugal Pump Head Only, Bronze
|
681.56 |
|
|
Jabsco 18540-0000 Pump Cent
FEATURES
Pump Body:
Bronze Pedestal
Port Size:
Inlet: 1 1/4" NPT
Outlet: 1" NPT
Flow:
50 GPM at 10 feet of Head, 3450 RPM
Impeller:
Bronze Centrifugal
Shaft Seal:
Mechanical Carbon-Ceramic, Buna
Shaft:
304 Stainless Steel
APPLICATIONS / CHARACTERISTICS
Continuous duty rated bronze centrifugal pedestal pump.
Jabsco Centrifugal Pump Head Only 3" Impeller 50GPM at 10' Head, 1 1/4"FNPT Inlet, 1"FNPT Outlet
|
446.11 |
|
|
Oberdorfer 172B Cent Pump Peo Brz 3/4" Prt
FEATURES
Pump Body:
Bronze
Ports:
3/4" NPT
Flow:
13 GPM Max
Pressure:
7 PSI Max, 17 feet of head
Impeller:
Centrifugal
Shaft Seal:
Mechanical Seals - Type 6A/68 Buna Standard, Viton Optional
Shaft:
Corrosion resistant passivated 316 SS Shaft
Motor / Drive:
TEFC Motors 1/10 HP permanent Magnet 12V, 24V, 32V DC.
Rubber base grommets for vibration dampening
1/13 HP Permanent Magnet 12V DC Motor - 172L threaded shaft style.
1/8 HP Capacitor Start 50/60 HZ, 115V & 220V AC Motors with Ignition protection, Thermal overload protection, Power cord with plug.
APPLICATIONS / CHARACTERISTICS
BRONZE CLOSE COUPLED CENTRIFUGAL PUMP
Ideal for: Marine Air Conditioning, Engine Block Temperature Control, Radiator and Heat Exchanger, Circulation Baitwell Circulation.
Oberdorfer Centrifugal Pump Head Only, Bronze, 3/4"NPT P
|
399.75 |
|
|
Oberdorfer 209M Series Macerator Pump
FEATURES
Pump Body:
Bronze
Ports:
Inlet: 2" Slip-on Hose and 1 1/2" Pipe Thread
Outlet: 3/4" Garden Hose and 3/8" Pipe Thread
Flow:
9.0 GPM Max
Pressure:
12 PSI Max
Impeller:
Flexible Rubber Impeller Neoprene standard, Buna Optional.
Shaft Seal:
Lip Seal
Shaft:
Stainless Steel Motor Shaft
Motor / Drive:
12, 24 or 32VDC high torque, 18 amps. Intermittent duty cycle. Do not run pump dry.
APPLICATIONS / CHARACTERISTICS
BRONZE CLOSE COUPLED RUBBER IMPELLER PUMP, SEWAGE - MACERATOR
Used in: Utility Trailers, Boats, Railroads, Buses, Motor Homes, Emergency, Campers, Mobil Homes, Cottages, Camp Sites, Aircraft, Marine Transporation, Recreational Vehicles, Land & Water Cruisers, Commercial & Pleasurecraft.
Will handle sewage, waste, toilet paper, cigarettes, cigars and all maceratable solids of approximately 1 inch size. Self priming up to 4 ft. Up to 20 ft. uphill discharge or up to 50 ft. away. (Use large diameter garden hose - 3/4” - for best results.) A 30 gallon holding tank can be emptied in less than 4 minutes. Motor Shaft Slinger Protects Motor Bearings. Rubber Motor Grommets for Noise Isolation. Macerator Wheel and Impeller Easily Replaced. Removable Base.
Oberdorfer Macerator Pump Head Only, Bronze
|
490.31 |
|
|
Oberdorfer 214M Series Macerator Pump
FEATURES
Pump Body:
Bronze
Ports:
Inlet: 1 1/2" Threaded
Outlet: 3/4" Garden Hose and 3/8" NPT
Flow:
12.5 GPM Max
Pressure:
30.0 PSI Max, 70 feet of head
Impeller:
Neoprene Standard, Buna Optional
Shaft Seal:
Lip Type
Shaft:
Stainless steel motor shaft
Motor / Drive:
High torque capacitor start 1/3 HP TEFC 115V motor with grounded 3 prong cord.
APPLICATIONS / CHARACTERISTICS
CLOSE COUPLED BRONZE MACERATOR RUBBER IMPELLER PUMP
For sewage transfer from toilets to holding tanks For pump-out and disposal from holding tanks. Will Handle sewage, waste, toilet paper, cigarettes, cigars, and all maceratable solids of approximately 1 inch size. A suction lift of up to 4 feet is possible under ideal conditions. Because the suction line for sewage handling is of large size (1 1/2” pipe) a large volume of air must be evacuated to create vacuum and suction lift. This is why a “wet” start is essential to prevent overheating and burning of the impeller during the air evacuation and suction period.
Oberdorfer Macerator Pump Head Only, Bronze
|
930.60 |
|
|
Oberdorfer Cent Pump Ped Mnt 3/4 X 1/2
Ag Pump for Heat and Humidity Control
Oberdorfer Ag pumps are the right product for the job. Our Ag pumps can pump fuel oil to the oil burner and heat water. Water Is heated to approximately 120 degrees Fahrenheit, and sprayed into the cotton batt, making it suitable for any need. Your company’s processing, bailing, and shipping efforts will be much more efficient after being outfitted with these hard working ag pumps.
Max Flow 25 GPM
Max Pressure 29 PSI
Rugged Bronze Construction
Quiet Operation
O-Ring Housing seal eliminates gasket problems
Mechanical Seal - Carbon/Ceramic, Nitrile - standard, Fluoroelastomer (S10) or Polytetrafluoroethylene (PTFE) (S11) - options
Designed for Pulley Drive
Heavy Duty Integral Steel Shaft and Ball Bearings
Handles Contaminated Liquids
No bearing lubrication required
|
674.06 |
|
|
Oberdorfer 600 Cent Pump Peo Brz 3/4 X 1/2
|
536.25 |
|
|
Oberdorfer 300B Series Self Priming Centrifugal Pump
FEATURES
Pump Body:
Bronze
Ports:
1" NPT
Flow:
22 GPM Max
Pressure:
15 PSI Max, 35 feet of head
Impeller:
Centrifugal
Shaft Seal:
Mechanical Buna Seal Standard, Viton or Teflon Optional
Shaft:
Stainless Steel Standard, Monel Optional
Motor / Drive:
Attaches to NEMA C flange jet pump motors with threaded shaft of stainless steel or monel. We can supply additional motors and assemble if required.
APPLICATIONS / CHARACTERISTICS
This close coupled style bronze self-priming centrifugal pump is equipped with high quality ball bearings permanently filled with grease for maintenance free operation. The main shaft seal is a mechanical face type seal of proven reliability. Unlike positive displacement pumps centrifugal pumps have larger internal clearances as the pressure is generated by centrifugal force and high liquid velocity. These pumps can handle impurities in the liquid and the flow in the discharge line may be throttled or shut off without the need for a relief valve.
FEATURES
Self-Priming to 20 Feet Suction Lift
Rugged Bronze Construction
Ideal for marine service (air conditioning, bilge, and sea water recirculating).
O-Ring Housing seal eliminates gasket problems
Auxiliary Connections - for convenient priming and draining
Multiple Mechanical Shaft Seal Options -for various applications
Pump Heads mount to Standard Footed Nema 56J Jet Pump Motors
Shafts : 416 Stainless, Nickel Alloy, or 316 Passivated Stainless
Multiple motor options including Explosion Proof
For Pedestal Style, see 30PB
Optional Lifting Handle
DRIVE
Centrifugal pumps are designed for single rotation and are non reversible. Standard rotation is counter clockwise looking at the pump inlet port (clockwise facing pump shaft). Close coupled centrifugal pumps may be driven by a variety of power sources such as electric motors, hydraulic motors or air motors. Self priming centrifugal pumps must be operated in the horizontal position.
LIQUIDS & TEMPERATURES
Capacity - Water 60o F - Gallons Per Minute
Maximum lift without foot valve is 10 feet.
Bronze pumps are suitable for most common liquids in the pH range from 4-11. If in doubt consult with factory or check the Oberdorfer™ Chemical Resistance Guide booklet. The temperature limit for bronze pumps is 212F. Higher temperatures are possible with fluoroelastomer or Polytetrafluoroethylene (PTFE) seals. Centrifugal pumps are not well suited for pumping viscous liquids. Viscosities up to 2000 SSu may be handled resulting in reduced performance and efficiency.
Pump seal is mechanical carbon face type mated to ceramic wear face for maximum durability. Other seal components are made of Nitrile with low swell characteristics for compatibility with a wide range of liquids including many chemicals and solvents.
SUCTION LIFT
Up to 22 gallons per minute water flow and suction lift of 15 feet without a foot or check valve (25 foot suction lift using a foot or check valve and a filled inlet line). A 1/2” pipe plug on the tank top is for initial filling of priming chamber and inlet line--pump priming is automatic thereafter.
300B is Oberdorfers - Self Priming Centrifugal Pump Head Only Bronze
|
1139.40 |
|
|
Oberdorfer 83PB Series Centrifugal Pedestal Pump
FEATURES
Pump Body:
Bronze
Ports:
Inlet: 1 1/2" NPT
Outlet: 1 1/4" NPT
Flow:
100 GPM Max
Pressure:
56 PSI Max, 130 feet of head
Impeller:
Centrifugal Closed Impeller
Shaft Seal:
Mechanical Seal Buna Standard, Viton or Teflon Optional
Shaft:
Stainless Steel Shaft
Motor / Drive:
Designed for Pulley Drive Applications. We have many motor options available and can assemble for you.
APPLICATIONS / CHARACTERISTICS
BRONZE CENTRIFUGAL PEDESTAL PUMPS
The special pump alloys used provide corrosion resistance to many liquids including water, water solutions, and a wide range of commercial chemicals. Field Convertible to Close Coupled Unit Using Standard Keyed Shaft “C” Flange Motor. Will Handle Contaminated Liquids. Extremely Quiet. May Be Operated with the Shaft Horizontal or Vertical.
Oberdorfer Centrifugal Pedestal Pump Head Only, Bronze, 1-1/2" X 1-1/4"NPT Ports
|
2401.20 |
|
|
Oberdorfer 300B Series Self Priming Centrifugal Pump
FEATURES
Pump Body:
Bronze
Ports:
1" NPT
Flow:
22 GPM Max
Pressure:
15 PSI Max, 35 feet of head
Impeller:
Centrifugal
Shaft Seal:
Mechanical Buna Seal Standard, Viton or Teflon Optional
Shaft:
Stainless Steel Standard, Monel Optional
Motor / Drive:
Attaches to NEMA C flange jet pump motors with threaded shaft of stainless steel or monel. We can supply additional motors and assemble if required.
APPLICATIONS / CHARACTERISTICS
CLOSE COUPLED BRONZE SELF-PRIMING CENTRIFUGAL PUMP
Bronze Models with Monel Shaft Sleeve - Ideal for marine service (air conditioning, bilge, and sea water recirculating). Can handle most difficult solvents with proper seal arrangement. Suction lift of 15 feet without a foot or check valve
300B-10J36BJ-50/60 is Oberdorfers - Self Priming Centrifugal Pump Bronze 1/2HP 115/230V 316SS Shaft
|
1769.04 |
|
|
Oberdorfer 300B Series Self Priming Centrifugal Pump
FEATURES
Pump Body:
Bronze
Ports:
1" NPT
Flow:
22 GPM Max
Pressure:
15 PSI Max, 35 feet of head
Impeller:
Centrifugal
Shaft Seal:
Mechanical Buna Seal Standard, Viton or Teflon Optional
Shaft:
Stainless Steel Standard, Monel Optional
Motor / Drive:
Attaches to NEMA C flange jet pump motors with threaded shaft of stainless steel or monel. We can supply additional motors and assemble if required.
APPLICATIONS / CHARACTERISTICS
CLOSE COUPLED BRONZE SELF-PRIMING CENTRIFUGAL PUMP
Bronze Models with Monel Shaft Sleeve - Ideal for marine service (air conditioning, bilge, and sea water recirculating). Can handle most difficult solvents with proper seal arrangement. Suction lift of 15 feet without a foot or check valve.
300B-01-F26 is Oberdorfers - Self Priming Centrifugal Pump Bronze 1/3HP 115/230V Monel Shaft
|
1944.07 |
|
|
Oberdorfer 300B Series Self Priming Centrifugal Pump
FEATURES
Pump Body:
Bronze
Ports:
1" NPT
Flow:
22 GPM Max
Pressure:
15 PSI Max, 35 feet of head
Impeller:
Centrifugal
Shaft Seal:
Mechanical Buna Seal Standard, Viton or Teflon Optional
Shaft:
Stainless Steel Standard, Monel Optional
Motor / Drive:
Attaches to NEMA C flange jet pump motors with threaded shaft of stainless steel or monel. We can supply additional motors and assemble if required.
APPLICATIONS / CHARACTERISTICS
CLOSE COUPLED BRONZE SELF-PRIMING CENTRIFUGAL PUMP
Bronze Models with Monel Shaft Sleeve - Ideal for marine service (air conditioning, bilge, and sea water recirculating). Can handle most difficult solvents with proper seal arrangement. Suction lift of 15 feet without a foot or check valve.
300B-01-J26 is Oberdorfers - Self Priming Centrifugal Pump Bronze 1/2HP 115/230V Monel Shaft
|
1977.77 |
|
|
Oberdorfer 300B Series Self Priming Centrifugal Pump
FEATURES
Pump Body:
Bronze
Ports:
1" NPT
Flow:
22 GPM Max
Pressure:
15 PSI Max, 35 feet of head
Impeller:
Centrifugal
Shaft Seal:
Mechanical Buna Seal Standard, Viton or Teflon Optional
Shaft:
Stainless Steel Standard, Monel Optional
Motor / Drive:
Attaches to NEMA C flange jet pump motors with threaded shaft of stainless steel or monel. We can supply additional motors and assemble if required.
APPLICATIONS / CHARACTERISTICS
CLOSE COUPLED BRONZE SELF-PRIMING CENTRIFUGAL PUMP
Bronze Models with Monel Shaft Sleeve - Ideal for marine service (air conditioning, bilge, and sea water recirculating). Can handle most difficult solvents with proper seal arrangement. Suction lift of 15 feet without a foot or check valve.
300B-F21 is Oberdorfers - Self Priming Centrifugal Pump Bronze 1/3HP 1PH Explosion Proof
|
2687.41 |
|
|
Oberdorfer 109MB Series Centrifugal Pump
FEATURES
Pump Body:
Bronze
Ports:
Inlet: 1 1/4" NPT
Outlet: 1" NPT
Flow:
80 GPM Max
Pressure:
to 19 PSI, 45 feet of head
Impeller:
Centrifugal
Shaft Seal:
Teflon Barrier Seal to Protect Motor Bearings. Carbon Face Mechanical Pump Seals. Buna Std., Viton and Teflon available.
Shaft:
416 Stainless Steel is standard, Monel Shaft available for Marine Use
Motor / Drive:
Pump heads mount to standard footed NEMA 56J jet pump motors. A wide variety of motors are available and we can assemble for you.
APPLICATIONS / CHARACTERISTICS
BRONZE CLOSE COUPLED CENTRIFUGAL PUMP
This close-coupled pump uses a standard NEMA C-Flange Jet Pump Motor with weld-on base and threaded shaft end to accept the pump impeller. The pump uses a mechanical type shaft seal with a Buna rubber element. It is suitable for water, oils, and some mild solvents and it is limited to 212 F. Viton® seals and Teflon seals (Chemlon) are available for severe solvents, difficult chemicals, and elevated temperatures.
Will Handle Contaminated Liquids. Extremely Quiet. A Standard in the Marine Air Conditioning Industry.
109MB-J19 is Oberdorfers - Centrifugal Pump 1/2HP ODP 115/230V
Aqua-Air AQPM-30, Cruisair PM3000BX
|
1520.10 |
|
|
Oberdorfer 109MB Series Centrifugal Pump
FEATURES
Pump Body:
Bronze
Ports:
Inlet: 1 1/4" NPT
Outlet: 1" NPT
Flow:
80 GPM Max
Pressure:
to 19 PSI, 45 feet of head
Impeller:
Centrifugal
Shaft Seal:
Teflon Barrier Seal to Protect Motor Bearings. Carbon Face Mechanical Pump Seals. Buna Std., Viton and Teflon available.
Shaft:
416 Stainless Steel is standard, Monel Shaft available for Marine Use
Motor / Drive:
Pump heads mount to standard footed NEMA 56J jet pump motors. A wide variety of motors are available and we can assemble for you.
APPLICATIONS / CHARACTERISTICS
BRONZE CLOSE COUPLED CENTRIFUGAL PUMP
This close-coupled pump uses a standard NEMA C-Flange Jet Pump Motor with weld-on base and threaded shaft end to accept the pump impeller. The pump uses a mechanical type shaft seal with a Buna rubber element. It is suitable for water, oils, and some mild solvents and it is limited to 212 F. Viton® seals and Teflon seals (Chemlon) are available for severe solvents, difficult chemicals, and elevated temperatures.
Will Handle Contaminated Liquids. Extremely Quiet. A Standard in the Marine Air Conditioning Industry.
109MB-10J36BJ is Oberdorfers - 109MB-10J36BJ Centrifugal Pump and Motor 115/230 Volt
|
1632.38 |
|