R509C-LHW CHIRP Transducer Features: Fishing Profile: Commercial and recreational inshore and offshore fishing (deep-water canyon and sea-mount tracking) 25-Internal, Broadband Ceramic Elements Broadband / CHIRP / Spread Spectrum Operating frequencies: Low—Chirps from 28 kHz to 60 kHz High—Chirps from 130 kHz to 210 kHz Beamwidth (Adjustable): Low—23° to 9° High—8° to 4° 10 m (33’) cable, no connector Fast-response water-temperature sensor Boat size: 12 m (40’) and above Hull Type: Fiberglass, wood, or metal Exclusive Transducer ID® This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

R509C-LH CHIRP Transducer Features: Fishing Profile: Commercial and recreational inshore and offshore fishing (deep-water canyon and sea-mount tracking) 25-Internal, Broadband Ceramic Elements Broadband / CHIRP / Spread Spectrum Operating frequencies: Low—Chirps from 28 kHz to 60 kHz High—Chirps from 130 kHz to 210 kHz Beamwidth (Adjustable): Low—23° to 9° High—8° to 4° 10 m (33’) cable, no connector Fast-response water-temperature sensor Boat size: 12 m (40’) and above Hull Type: Fiberglass, wood, or metal Exclusive Transducer ID® This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

PM275C-LHW CHIRP Transducer Keel-mount 1kW dual-band CHIRP fishfinder transducer. The PM265 is a Pocket/Keel mount unit available in the Low/Medium and Low/High bands. The PM275 is a wide beam version of the PM265 with Low/High bands and a wide beam. Specifications: Type: CHIRP dual-band fishfinder transducer LM Version: Low Band 42-65 kHz / Beam width 25-16° // Medium Band 85-135 kHz / Beam width 16-11° LH Version: Low Band 42-65 kHz / Beam width 25-16° // High Band 130-210 kHz / Beam width 10-6° LHW Version: Low Band 42-65 kHz / Beam width 25-16° // High Wide Band 150-250 kHz / Beam width 25° Power Rating: 1000 watts Mounting: Pocket/Keel Mount Housing: Urethane Hull Aperture: 1.75" (44.5mm) This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

PM111LH Pocket Mount - Low-High Chirp 2kW - No Connector A popular choice for boat builders, pocket mount transducers is installed within a small custom pocket in your vessel’s hull or keel, flush to the surface. Though retrofit installation is possible, these transducers are most commonly used in vessels with a suitable pre-cut pocket. Pocket-mounted transducers provide reliable and accurate sonar performance, with some impact on boat speed and fuel efficiency. As a common alternative, thru-hull transducers with a fairing block deliver comparable sonar performance and vessel impact. Features: Depth & fast-response water-temperature sensor Fiberglass and metal stepped, planing, or displacement hull types Advantages: All the benefits of a thru-hull without the need for a high-performance fairing Can accommodate any deadrise angle Can be used with all propulsion types Specifications: Low (38 kHz to 75 kHz): 19° to 10° port/star 10° to 5° fore-aft beam Maximum depth 6000 ft. High (130 kHz to 210 kHz): 8° to 4° beamwidth Max. depth 1500 ft. Bottom Coverage Relative to Frequency and Depth Depth (50 ft.): 6 ft. Depth (100 ft.): 14 ft. Depth (300 ft.): 42 ft. Depth (600 ft.): 84 ft. Depth (1000 ft.): 140 ft. Depth (1500 ft.): 210 ft. Depth (2000 ft.): Too deep This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

PM111 LHW CHIRP 2kW Wide-Beam Chirp-Ready Pocket/Keel Mount - No Connector Get more coverage under your boat with Airmar’s unique wide-beam, high-frequency, Chirp-ready transducer. The high band operates across a frequency range of 150 to 250 kHz and has a fixed 25° beam for all frequencies. The high-frequency band results in superior resolution. The constantly wide beam provides twice the coverage and excellent fish arches on the display compared to most high-frequency, narrow-beam transducer options. The high wide is the ideal choice for both inshore and pelagic fishing, where resolution and maximum coverage under the boat are essentially down to 152 m (500'). The low-frequency band and 2 kW of power also support great deep-water performance. Get the best of both worlds with Airmar’s dual-frequency, Chirp-ready transducer with wide-beam coverage. Features: The depth and fast-response water-temperature sensor 2 kW of power for great deep-water performance from the low frequency 2 kW low frequency: 38 to 75 kHz 19° to 10° port-starboard beamwidth 10° to 5° fore-aft beamwidth Maximum depth of 1,829 m (6,000') 1 kW high frequency: 150 to 250 kHz 25° constant beamwidth Maximum depth of 152 m (500') 137 kHz of total bandwidth from one transducer Covers popular fishing frequencies of 50, 68, and 200 kHz plus everything else in the bandwidth High frequency delivers superior shallow-water performance, bottom detail, and fish-target separation High wide beamwidth yields more coverage for detecting fish in the upper-water column Urethane housing designed for custom mounting in a cavity Also available in an external (R109LHW) mount Exclusive Xducer ID® technology Specifications: Weight: 13.6 kg (30 lb.) Recommended Boat Length: 12 m (40') and above Hull Material: Solid fiberglass only Hull Deadrise: Accommodates any deadrise angle based on custom cavity construction Acoustic Window: Epoxy/urethane Transducer Element: 16 internal broadband ceramic assemblies This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

R509C-LM CHIRP 3KW Transducer Unlock the true potential of your fish-finder with the superior quality and performance of an AIRMAR Chirp-ready transducer. Features: Depth & fast-response water-temperature sensor Epoxy transducer housing with high-performance fairing For use on hulls up to 25° deadrise 82 kHz of total bandwidth from one transducer Benefits of Thru-Hull Transducers with High-Performance Fairing: The best performance on vessels 25 feet and up because the transducer face is in “clean” water below the boundary layer (bubbles running down the hull) The fairing compensates for hull deadrise and reduces turbulence over the transducer face, which allows tracking at speeds over 30 knots (35 MPH) When mounted in clean water (forward of propellers and running gear), thru-hulls produce the most effective signal return since nothing on the vessel interferes with the transducer’s active surface Specifications: Boat Size: 12 m (40 ft.) and above Hull Type: Fiberglass, wood, or metal Engine Type: Inboard, outboard or I/O Low (28 kHz to 60 kHz): 23° to 9° port/starboard 11° to 5° fore-aft beamwidth Maximum depth 10000 ft Medium (80 kHz to 130 kHz): 13° to 8° beamwidth Maximum depth 3000 ft. Bottom Coverage Relative to Frequency and Depth Depth (50 ft.): 10 ft. Depth (100 ft.): 24 ft. Depth (300 ft.): 68 ft. Depth (600 ft.): 136 ft. Depth (1000 ft.): 228 ft. Depth (1500 ft.): 340 ft. Depth (2000 ft.): 456 ft. Depth (2500 ft.): 570 ft. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

R109LHW Low High Wide Chirp Thru-Hull Transducer with Fairing Block - No Connector Get more coverage under the boat with Airmar’s unique wide-beam, low- and high-frequency, Chirp-ready R109LHW. The high band operates across a frequency range of 150 to 250 kHz and has a fixed 25-degree beam for all frequencies, which results in superior resolution. The constantly wide beam provides twice the coverage and clear fish arches on the display compared to most high-frequency, narrow-beam transducers. The high-wide is the ideal choice for both inshore and pelagic fishing, where resolution and maximum coverage under the boat are essentially down to 152 m (500'). The low-frequency band and 2 kW of power also support great deep-water performance. Get the best of both worlds with Airmar’s Chirp-ready transducer with wide-beam coverage. Features: Depth and fast-response water-temperature sensing 2 kW of power for excellent deep-water performance from the low-frequency 2 kW low frequency (38 to 75 kHz): 19 to 10-degree port-starboard beamwidth; 10 to 5-degree fore-aft beamwidth Maximum depth of 1829 m (6000') 1kW high frequency (150 to 250 kHz): 25-degree constant beamwidth; Maximum depth of 152 m (500') 137 kHz of total bandwidth from one transducer Covers popular fishing frequencies of 50, 68, and 200 kHz plus everything else in the bandwidth High frequency delivers superior shallow-water performance, bottom detail, and fish-target separation High wide beamwidth yields more coverage for detecting fish in the upper-water column Urethane housing with fairing for optimal performance No Connector - Bare Wire Comes with Fairing Block Patented Xducer ID® technology Specifications: Acoustic Window: Epoxy/urethane Common Use: Fishing, commercial fishing Functions: Depth, temperature High Frequency: 150-250 kHz High-Wide Beamwidth: 25 degrees Housing: Urethane Hull Material: Compatible with all hull materials Low-Frequency: 38-75 kHz Low-Frequency Beamwidth: 19-10 degrees Max Deadrise: Up to 22 degrees Max Deadrise Angle: 22 degrees Max Depth: Low frequency- 1829 m (6000'), High wide frequency- 152 m (500') Max Vessel LOA: 9 m (30') and above Mounting Style: Thru-hull Power Rating: 2 kW Retractable housing: No Single or Dual Frequency: CHIRP-ready dual-band Tilted Element: No Weight: 15.1 kg (33.3 lb.) This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

CM599C-LHW Chirp Wide Broadband - No Connector - Bare Wires Features: Pocket/Keel mount wide-beam model with 3000W power rating Depth and fast-response water temperature sensor Wide-beam model with 25° constant beamwidth in High band and 9°-23° beamwidth in Low band With Low (28-60kHz) and High (150-250kHz) frequency bands This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Low/High Frequency - In-Hull Chirp Transducer without Connector Rely on Airmar's new broadband transducers for your ultimate fishing mission. Whether you're a commercial fisherman, charter captain, or tournament angler, there's a new game in town! Chirp transducers enable bottom detection down to 3,000m (10,000') with 5 to 10 times greater detail and resolution so precise it_s possible to distinguish between individual baitfish, game fish, and underwater structures. One transducer delivers up to 112 kHz of total bandwidth in just one installation, saving customers time and money. As the ELITE model in the Chirp In-Hull product line, the R599 LH Chirps across the following bandwidths: LH Model - Low Frequency 28-60 kHz/High Frequency 130-210 kHz Features: Depth only Low-CHIRPS from 28 kHz to 60 kHz 23° to 9° beamwidth High-CHIRPS from 130 kHz to 210 kHz 8° to 4° beamwidth 112 kHz of total bandwidth from one transducer Covers popular fishing frequencies of 28, 38, 50, and 200 kHz plus everything else in the bandwidth Fishing Profile: Recreational and commercial inshore and offshore fishing (deep-water canyon and sea-mount tracking) Epoxy transducer housing Hull Type: Solid fiberglass only Specifications: Hull Deadrise: 0° to 22° Acoustic Window: Epoxy/urethane All mounting hardware provided, including tank Weight: 19.7 kg (43.4 lb) This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

B275C-LHW Bronze Thru-Hull - Low & High Wide Frequency Requires Mix & Match Cable Get more coverage under the boat with Airmar's wide beam CHIRP product line. Offering a high frequency range of 150-250 kHz and a constant 25° beam width, these transducers are truly broadband at its best. In addition to improving the performance of CHIRP-ready echosounders, anglers using the new wide beam transducers will achieve twice the coverage under the boat compared to our current high frequency CHIRP transducers. A unique property of the high frequency transducers is that the beambwidth is a constant 25° angle across the entire frequency band. Now, in addition to providing vast bottom coverage and precise fish detection in the upper water column that can sometimes go unseen with our narrow beam transducers, Airmar's wide beam format also creates crisper and larger return images on the display. We've got you covered! Features: Depth & Temperature 42-65 kHz L Frequency 150-250 kHz H Frequency Bronze 1 kW Wide 25° Beam This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

TM185C-HW-MM CHIRP Transducer Transom Mount Needs Mix & Match Cable Get more coverage under the boat with Airmar's wide beam Chirp. Offering a high frequency range of 150-250 kHz and a constant 25° Beamwidth, this transducer is truly broadband at its best. In addition to improving the performance of Chirp-ready echosounders, anglers using this wide beam transducer will achieve twice the coverage under the boat compared to our current high frequency Chirp transducers. A unique property of the high frequency transducers is that the Beamwidth is a constant 25° angle across the entire frequency band. Now, in addition to providing vast bottom coverage and precise fish detection in the upper water column that can sometimes go unseen with our narrow beam transducers, Airmar's wide beam format also creates crisper and larger return images on the display. Features: CHIRPS across the following bandwidths: — High-Frequency: 150-250 kHz 25° Constant Beamwidth 1kW (1,000 Watt) RMS Power Depth Range: 600'-800' Depth & fast-response water-temperature sensor Urethane housing and stainless steel kick-up mounting bracket Boat Size: 8 m to 12 m (25' to 40') Boat Type: Outboards; I/O Hull Type: Fiberglass, Wood, Metal Can retrofit to existing TM258, TM260, TM265, and TM275 bracket Needs Mix & Match Cable This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

MM-8G Mix & Match Cable for 600W Non-CHIRP Transducers Mix and Match 600W transducers are made as a common base transducer with a short (2m) cable attached, plus an interchangeable longer (8m) brand-specific adapter cable. The short pigtail attached to the transducer ends in an Airmar 5-pin female connector. The adapter cables have a matching Airmar 5-pin male connector (shown below) at one end and the correct connector for a specific brand of electronics at the other end. Both parts are needed for installation. If the user changes equipment brand at some later time, the transducer can be left in place and the adapter cable replaced. Mix and Match 600W transducers include the B117, B45, B60, P319, P66*, P79, SS505, and SS60. (* not all models) A 12m (40') extension cable (part MM-5P-5P) is available with one male and one female 5-pin connector. Note that 600W Mix and Match cables cannot be used with 1kw transducers. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

R111-LH Chirp In-Hull Transducer - Bare Wire Rely on Airmar’s new broadband transducers for your ultimate fishing mission. Whether you’re a commercial fisherman, charter captain, or tournament angler, there’s a new game in town! Chirp transducers enable bottom detection down to 3,000m (10,000’) with 5 to 10 times greater detail and resolution so precise it’s possible to distinguish between individual baitfish, game fish, and underwater structures. One transducer delivers up to 117 kHz of total bandwidth in just one installation, saving customers time and money. A Hard-Core In-Hull model in the Chirp Thru-Hull product line L/H Chirps across the following bandwidths: L/H Model -Low Frequency 38-75 kHz, High Frequency 130-210 kHz Features Depth & fast-response water-temperature sensor Low—CHIRPS from 38 kHz to 75 kHz 19° to 10° beamwidth High—CHIRPS from 130 kHz to 210 kHz 8° to 4° beamwidth 117 kHz of total bandwidth from one transducer Covers popular fishing frequencies of 38, 50, and 200 kHz plus everything else in the bandwidth Fishing Profile: Recreational and commercial inshore and offshore fishing (deep-water canyon and sea-mount tracking) Urethane transducer housing Hull Type: Solid fiberglass only Exclusive Xducer ID® technology Hull Deadrise: 0° to 22° Acoustic Window: Epoxy/urethane All mounting hardware provided, including tank Weight: 19.7 kg (43.4 lb) This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

B765C-LM Bronze CHIRP Transducer - Needs Mix & Match Cable - Does NOT Work with Simrad & Lowrance Rely on Airmar’s broadband transducers for your ultimate fishing mission. Whether you’re a commercial fisherman, charter captain, or tournament angler, there’s a new game in town! Chirp transducers enable bottom detection down to 3,000m (10,000’) with 5 to 10 times greater detail and resolution so precise it’s possible to distinguish between individual baitfish, game fish, and underwater structures. One transducer delivers up to 85 kHz of total bandwidth in just one installation, saving customers time and money. A Thru-Hull Chirp transducer perfectly suited for smaller fishing boats, the B765L/M Chirps across the following bandwidths:*L/M -Low Frequency 40-75 kHz, Medium Frequency 80-130 kHz * Please Note: The low frequency operating band is 300 W. The medium frequency operating band is 600 W. Features Depth & fast-response water-temperature sensor Low—CHIRPS from 40 kHz to 75 kHz, 32° to 21° beamwidth Medium—CHIRPS from 80 kHz to 130 kHz, 24° to 16° beamwidth 85 kHz of total bandwidth from one transducer Covers popular fishing frequencies of 50, 88, and 107 kHz plus everything else in the bandwidth All the advantages of the larger Thru-Hull Chirp transducers, suitable for smaller boats Bronze transducer housing with High-Performance Fairing Boat Size: Up to 9 m (30’) and above Hull Type: Fiberglass or wood Exclusive Xducer ID® technology Hull Deadrise: Up to 24° with a fairing Acoustic Window: Urethane Weight: 2.5 kg (5.5 lb) This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Airmar R109LM Thru-Hull Transducer - Bare Wires Rely on Airmar’s broadband transducers for your ultimate fishing mission. Whether you’re a commercial fisherman, charter captain, or tournament angler, there’s a new game in town! Chirp transducers enable bottom detection down to 3,000M (10,000’) with 5 to 10 times greater detail and resolution so precise it’s possible to distinguish between individual baitfish, game fish, and underwater structures. One transducer delivers up to 107 kHz of total bandwidth in just one installation, saving customers time and money. As the HARD CORE model in the Chirp Thru-Hull product line, the R109LM Chirps across the following bandwidths: LM Model - Low Frequency 38-75 kHz/Medium Frequency 80-130 kHz Features: Depth & fast-response water-temperature sensor Low—CHIRPS from 38 kHz to 75 kHz 19° to 10° port-starboard beamwidth (10° to 5° fore-aft beamwidth) Medium—CHIRPS from 80 kHz to 130 kHz 13° to 8° beamwidth 87 kHz of total bandwidth from one transducer Covers popular fishing frequencies of 38, 50, 88, and107 kHz plus everything else in the bandwidth Fishing Profile: Commercial and recreational inshore and offshore fishing (deep-water canyon and sea-mount tracking) Urethane transducer housing with High-Performance Fairing Boat Size: 12 m (40’) and above Hull Type: Fiberglass, wood, or metal Exclusive Xducer ID® technology Specifications: Hull Deadrise: 0° to 25° Acoustic Window: Epoxy/urethane Weight: 15.1 kg (33.3 lb) WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.