|
R509C-LH CHIRP Transducer
Features:
Fishing Profile: Commercial and recreational inshore and offshore fishing (deep-water canyon and sea-mount tracking)
25-Internal, Broadband Ceramic Elements
Broadband / CHIRP / Spread Spectrum
Operating frequencies:
Low—Chirps from 28 kHz to 60 kHz
High—Chirps from 130 kHz to 210 kHz
Beamwidth (Adjustable):
Low—23° to 9°
High—8° to 4°
10 m (33’) cable, no connector
Fast-response water-temperature sensor
Boat size: 12 m (40’) and above
Hull Type: Fiberglass, wood, or metal
Exclusive Transducer ID®
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
4150.31 |
|
|
R509C-LHW CHIRP Transducer
Features:
Fishing Profile: Commercial and recreational inshore and offshore fishing (deep-water canyon and sea-mount tracking)
25-Internal, Broadband Ceramic Elements
Broadband / CHIRP / Spread Spectrum
Operating frequencies:
Low—Chirps from 28 kHz to 60 kHz
High—Chirps from 130 kHz to 210 kHz
Beamwidth (Adjustable):
Low—23° to 9°
High—8° to 4°
10 m (33’) cable, no connector
Fast-response water-temperature sensor
Boat size: 12 m (40’) and above
Hull Type: Fiberglass, wood, or metal
Exclusive Transducer ID®
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
4334.37 |
|
|
R509C-LM CHIRP 3KW Transducer
Unlock the true potential of your fish-finder with the superior quality and performance of an AIRMAR Chirp-ready transducer.
Features:
Depth & fast-response water-temperature sensor
Epoxy transducer housing with high-performance fairing
For use on hulls up to 25° deadrise
82 kHz of total bandwidth from one transducer
Benefits of Thru-Hull Transducers with High-Performance Fairing:
The best performance on vessels 25 feet and up because the transducer face is in “clean” water below the boundary layer (bubbles running down the hull)
The fairing compensates for hull deadrise and reduces turbulence over the transducer face, which allows tracking at speeds over 30 knots (35 MPH)
When mounted in clean water (forward of propellers and running gear), thru-hulls produce the most effective signal return since nothing on the vessel interferes with the transducer’s active surface
Specifications:
Boat Size: 12 m (40 ft.) and above
Hull Type: Fiberglass, wood, or metal
Engine Type: Inboard, outboard or I/O
Low (28 kHz to 60 kHz):
23° to 9° port/starboard
11° to 5° fore-aft beamwidth
Maximum depth 10000 ft
Medium (80 kHz to 130 kHz):
13° to 8° beamwidth
Maximum depth 3000 ft.
Bottom Coverage Relative to Frequency and Depth
Depth (50 ft.): 10 ft.
Depth (100 ft.): 24 ft.
Depth (300 ft.): 68 ft.
Depth (600 ft.): 136 ft.
Depth (1000 ft.): 228 ft.
Depth (1500 ft.): 340 ft.
Depth (2000 ft.): 456 ft.
Depth (2500 ft.): 570 ft.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
4453.13 |
|
|
R111-LH Chirp In-Hull Transducer - Bare Wire
Rely on Airmar’s new broadband transducers for your ultimate fishing mission. Whether you’re a commercial fisherman, charter captain, or tournament angler, there’s a new game in town! Chirp transducers enable bottom detection down to 3,000m (10,000’) with 5 to 10 times greater detail and resolution so precise it’s possible to distinguish between individual baitfish, game fish, and underwater structures. One transducer delivers up to 117 kHz of total bandwidth in just one installation, saving customers time and money.
A Hard-Core In-Hull model in the Chirp Thru-Hull product line L/H Chirps across the following bandwidths:
L/H Model -Low Frequency 38-75 kHz, High Frequency 130-210 kHz
Features
Depth & fast-response water-temperature sensor
Low—CHIRPS from 38 kHz to 75 kHz 19° to 10° beamwidth
High—CHIRPS from 130 kHz to 210 kHz 8° to 4° beamwidth
117 kHz of total bandwidth from one transducer
Covers popular fishing frequencies of 38, 50, and 200 kHz plus everything else in the bandwidth
Fishing Profile: Recreational and commercial inshore and offshore fishing (deep-water canyon and sea-mount tracking)
Urethane transducer housing
Hull Type: Solid fiberglass only
Exclusive Xducer ID® technology
Hull Deadrise: 0° to 22°
Acoustic Window: Epoxy/urethane
All mounting hardware provided, including tank
Weight: 19.7 kg (43.4 lb)
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
3289.92 |
|
|
PM275C-LHW CHIRP Transducer
Keel-mount 1kW dual-band CHIRP fishfinder transducer.
The PM265 is a Pocket/Keel mount unit available in the Low/Medium and Low/High bands. The PM275 is a wide beam version of the PM265 with Low/High bands and a wide beam.
Specifications:
Type: CHIRP dual-band fishfinder transducer
LM Version: Low Band 42-65 kHz / Beam width 25-16° // Medium Band 85-135 kHz / Beam width 16-11°
LH Version: Low Band 42-65 kHz / Beam width 25-16° // High Band 130-210 kHz / Beam width 10-6°
LHW Version: Low Band 42-65 kHz / Beam width 25-16° // High Wide Band 150-250 kHz / Beam width 25°
Power Rating: 1000 watts
Mounting: Pocket/Keel Mount
Housing: Urethane
Hull Aperture: 1.75" (44.5mm)
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1897.84 |
|
|
Low/High Frequency - In-Hull Chirp Transducer without Connector
Rely on Airmar's new broadband transducers for your ultimate fishing mission. Whether you're a commercial fisherman, charter captain, or tournament angler, there's a new game in town! Chirp transducers enable bottom detection down to 3,000m (10,000') with 5 to 10 times greater detail and resolution so precise it_s possible to distinguish between individual baitfish, game fish, and underwater structures. One transducer delivers up to 112 kHz of total bandwidth in just one installation, saving customers time and money.
As the ELITE model in the Chirp In-Hull product line, the R599 LH Chirps across the following bandwidths:
LH Model - Low Frequency 28-60 kHz/High Frequency 130-210 kHz
Features:
Depth only
Low-CHIRPS from 28 kHz to 60 kHz 23° to 9° beamwidth
High-CHIRPS from 130 kHz to 210 kHz 8° to 4° beamwidth
112 kHz of total bandwidth from one transducer
Covers popular fishing frequencies of 28, 38, 50, and 200 kHz plus everything else in the bandwidth
Fishing Profile: Recreational and commercial inshore and offshore fishing (deep-water canyon and sea-mount tracking)
Epoxy transducer housing
Hull Type: Solid fiberglass only
Specifications:
Hull Deadrise: 0° to 22°
Acoustic Window: Epoxy/urethane
All mounting hardware provided, including tank
Weight: 19.7 kg (43.4 lb)
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
4441.25 |
|
|
M265C-LH Low/High CHIRP In-Hull Transducer
The Airmar M265C-LH is a 1,000W transducer designed to work with chirp sonar systems and utilizes the Low and High-Frequency ranges (Frequency Range Below). The M265C has 8 highly sensitive internal broadband ceramic assemblies to accurately mark depth, bait, and fish, making it the perfect choice for commercial and recreational fishermen. You will also be able to see increased target detection whether you are fishing inshore or in deep offshore canyons. Designed for boats 8M (25) and above and only compatible with solid fiberglass hulls.
*Includes plastic/urethane transducer housing.
Features:
Low: CHIRPS from 42 kHz to 65 kHz 25° to 16° beamwidth
High: CHIRPS from 130 kHz to 210 kHz 16° to 11° beamwidth
103 kHz of total bandwidth from one transducer
Covers popular fishing frequencies of 50 and 200 kHz plus everything else in the bandwidth
No Connector
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1483.30 |
|
|
R109C-LH 2kW Thru-Hull Transducer
CHIRP transducers enable bottom detection down to 3,000M (10,000') with 5 to 10 times greater detail and resolution so precise it's possible to distinguish between individual baitfish, game fish, and underwater structures. One transducer delivers up to 117 kHz of total bandwidth in just one installation, saving customers time and money.
As the HARD CORE model in the CHIRP Thru-Hull product line, the R109 LH/LM CHIRPS across the following bandwidths:
LH Model - Low Frequency 38-75 kHz/High Frequency 130-210 kHz
Features:
Depth & fast-response water-temperature sensor
Low: CHIRPS from 38 kHz to 75 kHz 19° to 10° port-starboard beamwidth (10° to 5° fore-aft beamwidth)
High: CHIRPS from 130 kHz to 210 kHz 8° to 4° beamwidth
117 kHz of total bandwidth from one transducer
Covers popular fishing frequencies of 38, 50, and 200 kHz plus everything else in the bandwidth
Fishing Profile: Commercial and recreational inshore and offshore fishing (deep-water canyon and sea-mount tracking)
Urethane transducer housing with High-Performance FairingBoat Size: 12M (40') and above
Hull Type: Fiberglass, wood, or metal
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
3227.84 |
|
|
B765C-LH Bronze Chirp Transducer
Requires Mix and Match Cable
Thru-hull bronze model with fairing. Same physical size as a B744V, with 600W power rating. Need mix and match cable. Depth and fast-response water temperature sensor. LH model has Low (40-75kHz) and High (130-210kHz) frequency bands.
Please note: Does not work with Navico
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1049.32 |
|
|
TM185C-HW-MM CHIRP Transducer Transom Mount Needs Mix & Match Cable
Get more coverage under the boat with Airmar's wide beam Chirp. Offering a high frequency range of 150-250 kHz and a constant 25° Beamwidth, this transducer is truly broadband at its best. In addition to improving the performance of Chirp-ready echosounders, anglers using this wide beam transducer will achieve twice the coverage under the boat compared to our current high frequency Chirp transducers.
A unique property of the high frequency transducers is that the Beamwidth is a constant 25° angle across the entire frequency band. Now, in addition to providing vast bottom coverage and precise fish detection in the upper water column that can sometimes go unseen with our narrow beam transducers, Airmar's wide beam format also creates crisper and larger return images on the display.
Features:
CHIRPS across the following bandwidths: — High-Frequency: 150-250 kHz
25° Constant Beamwidth
1kW (1,000 Watt) RMS Power
Depth Range: 600'-800'
Depth & fast-response water-temperature sensor
Urethane housing and stainless steel kick-up mounting bracket
Boat Size: 8 m to 12 m (25' to 40')
Boat Type: Outboards; I/O
Hull Type: Fiberglass, Wood, Metal
Can retrofit to existing TM258, TM260, TM265, and TM275 bracket
Needs Mix & Match Cable
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1224.20 |
|
|
B765C-LM Bronze CHIRP Transducer - Needs Mix & Match Cable - Does NOT Work with Simrad & Lowrance
Rely on Airmar’s broadband transducers for your ultimate fishing mission. Whether you’re a commercial fisherman, charter captain, or tournament angler, there’s a new game in town! Chirp transducers enable bottom detection down to 3,000m (10,000’) with 5 to 10 times greater detail and resolution so precise it’s possible to distinguish between individual baitfish, game fish, and underwater structures. One transducer delivers up to 85 kHz of total bandwidth in just one installation, saving customers time and money.
A Thru-Hull Chirp transducer perfectly suited for smaller fishing boats, the B765L/M Chirps across the following bandwidths:*L/M -Low Frequency 40-75 kHz, Medium Frequency 80-130 kHz
* Please Note: The low frequency operating band is 300 W. The medium frequency operating band is 600 W.
Features
Depth & fast-response water-temperature sensor
Low—CHIRPS from 40 kHz to 75 kHz, 32° to 21° beamwidth
Medium—CHIRPS from 80 kHz to 130 kHz, 24° to 16° beamwidth
85 kHz of total bandwidth from one transducer
Covers popular fishing frequencies of 50, 88, and 107 kHz plus everything else in the bandwidth
All the advantages of the larger Thru-Hull Chirp transducers, suitable for smaller boats
Bronze transducer housing with High-Performance Fairing
Boat Size: Up to 9 m (30’) and above
Hull Type: Fiberglass or wood
Exclusive Xducer ID® technology
Hull Deadrise: Up to 24° with a fairing
Acoustic Window: Urethane
Weight: 2.5 kg (5.5 lb)
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1250.11 |
|
|
Airmar R109LM Thru-Hull Transducer - Bare Wires
Rely on Airmar’s broadband transducers for your ultimate fishing mission. Whether you’re a commercial fisherman, charter captain, or tournament angler, there’s a new game in town! Chirp transducers enable bottom detection down to 3,000M (10,000’) with 5 to 10 times greater detail and resolution so precise it’s possible to distinguish between individual baitfish, game fish, and underwater structures. One transducer delivers up to 107 kHz of total bandwidth in just one installation, saving customers time and money.
As the HARD CORE model in the Chirp Thru-Hull product line, the R109LM Chirps across the following bandwidths:
LM Model - Low Frequency 38-75 kHz/Medium Frequency 80-130 kHz
Features:
Depth & fast-response water-temperature sensor
Low—CHIRPS from 38 kHz to 75 kHz 19° to 10° port-starboard beamwidth (10° to 5° fore-aft beamwidth)
Medium—CHIRPS from 80 kHz to 130 kHz 13° to 8° beamwidth
87 kHz of total bandwidth from one transducer
Covers popular fishing frequencies of 38, 50, 88, and107 kHz plus everything else in the bandwidth
Fishing Profile: Commercial and recreational inshore and offshore fishing (deep-water canyon and sea-mount tracking)
Urethane transducer housing with High-Performance Fairing
Boat Size: 12 m (40’) and above
Hull Type: Fiberglass, wood, or metal
Exclusive Xducer ID® technology
Specifications:
Hull Deadrise: 0° to 25°
Acoustic Window: Epoxy/urethane
Weight: 15.1 kg (33.3 lb)
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
3432.74 |
|
|
R599 Low/Med Frequency In-Hull Chirp Transducer - Bare Wire
Rely on Airmar’s broadband transducers for your ultimate fishing mission. Whether you’re a commercial fisherman, charter captain, or tournament angler, there’s a new game in town! Chirp transducers enable bottom detection down to 3,000m (10,000’) with 5 to 10 times greater detail and resolution so precise it’s possible to distinguish between individual baitfish, game fish, and underwater structures. One transducer delivers up to 102 kHz of total bandwidth in just one installation, saving customers time and money.
As the ELITE model in the Chirp In-Hull product line, the R599LM Chirps across the following bandwidths: LM Model - Low Frequency 28-60 kHz/Medium Frequency 80-130 kHz.
Features:
Depth Only
Chirp Technology
L/M Frequency
2-3 kW
High-Performance
Epoxy
25 internal ceramics
Exclusive Xducer ID® technology
Specifications:
Hull Deadrise: 0° to 22°
Acoustic Window: Epoxy/urethane
All mounting hardware provided, including tank
Weight: 19.7 kg (43.4 lb)
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
4865.06 |
|
|
B75HW High Wide Tilted Element Chirp Transducer - 12 Degree Deadrise, 600W Thru Hull
Requires Mix and Match Cable for the appropriate Fishfinder it will be connected to.
Airmar’s low-profile Chirp-ready transducer models are the perfect addition to smaller boats such as center consoles. The B75HW combines the benefits of the high-frequency band for amazing target separation on baitfish and schooling gamefish, with a wide 30° beamwidth for maximum coverage under the boat. The B75H transducer delivers up to 100 kHz of total bandwidth in just one installation and delivers amazing coverage under the boat in depths to 106 meters (350').
B75HW transmits across the following bandwidth: High frequency 150 to 250 kHz
The transducer is installed almost flush to the hull. The tilt of the element corrects for the hull deadrise by orienting the beam directly down. This ensures maximum echo returns to the transducer for more accurate depth readings. Fixed 12° tilted version for 8° to 15° hull deadrises.
Features:
Depth and fast-response water-temperature sensor
600 W with a maximum depth performance of 106 m (350')
High frequency: 150 to 250 kHz
30° beamwidth
High frequency delivers great shallow-water performance, bottom detail, and clear fish-target returns
Low-profile, thru-hull housing provides good resolution at speed when installed properly
Bronze housing for use on stepped, planing, or displacement hull
Exclusive Xducer ID® technology
12° tilted version for 8° to 15° hull deadrises
Hole Size: 70 mm (2-13/16")
CHIRP-Ready Single-Band
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
900.34 |
|
|
B75H Bronze Chirp Thru Hull 0° Tilt - 600W
Requires Mix and Match Cable
Rely on Airmar’s broadband transducers for your ultimate fishing mission. Whether you’re a commercial fisherman, charter captain, or tournament angler, there’s a new game in town! Chirp transducers enable bottom detection down to 3,000m (10,000’) with 5 to 10 times greater detail and resolution so precise it’s possible to distinguish between individual baitfish, game fish, and underwater structures. One transducer delivers up to 80 kHz of total bandwidth in just one installation, saving customers time and money.
Features:
Depth & fast-response water-temperature sensor
High—CHIRPS from 130 kHz to 210 kHz, 15° to 9° beamwidth
0° tilted versions, 600w
80 kHz of total bandwidth from one transducer
Covers popular fishing frequency of 200 kHz plus everything else in the bandwidth
Bronze transducer housing
Boat Size: Up to 8 m (25’)
Hull Type: Fiberglass or wood
Exclusive Xducer ID® technology
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
738.41 |
|