R3016 Radar Control Unit Display - 16" The Simrad R3016 is a dedicated radar control unit with integrated 16-inch widescreen display, compatible with a range of Simrad radar solutions including Halo™ Pulse Compression, Broadband 3G™/4G™, and HD Digital Radar. An ideal safety and navigation accessory for offshore cruisers and sportfishing vessels, the R3016 offers versatile flush or bracket-mount installation options and intuitive keypad based operation for reliable control in all conditions. Features: Dedicated radar control unit Compatible with Simrad Halo™ Pulse Compression, Broadband 3G™/4G™, and HD Digital Radar systems Automatic tuning system Anti-sea-clutter technology for an optimum picture under adverse weather conditions MARPA target tracking 16-inch HD widescreen display HDMI output for an optional secondary display or remotely-operated "clone" station Keypad and rotary-dial interface with 8 direct-access menu keys Bracket and flush-mount installation options Ethernet, NMEA0183 & NMEA2000 connectivity

FU80 Remote Control w/Display The FU80 (a manoeuvre controller) is a Follow Up remote which means that the rudder, when hand steering, moves to the commanded angle set by turning the knob to port or starboard. Features: 35mm x 25mm display Type approved Two mounting options - desktop and panel (flush) Network based with NMEA2000 cabling Backward compatible with AP24, AP28, NSE, NSO

16.75" Dual Mount Pre-Drilled for Most Closed Dome Radars Top for FLIR Searchlight Satellite Domes Install your satdome, camera or other marine electronics above your radar using a Seaview Dual Mount. Doing this ensures maximum performance out of your electronics and eliminates radar interference. The bottom mounting plate is pre-drilled to fit all closed dome radars, while the top mounting plate is modular and sold separately. Oval hollow mast section allows for easy cable management.  Compact Design Specifically designed to not take up a large amount of space results in the perfect solution where space saving is a must. Eliminate Interference   A Dual Mount gives your radar or satdome extra height clearance to tower above anything that could obstruct its view, while still maintaining a small footprint. This also allows for all electronic cables to pass through one hole for cleaner installation.  Universal The lower platform is welded onto the main body of the mount. This platform comes pre-drilled for just about all open and closed dome radars. When selecting a Seaview dual mount be sure to check to make sure that the particular one you are looking at is for a closed dome radar or a open array radar. The dual mounts that are for an open array radar have an extended lower platform so that the antenna clears the main body of the mount.  Modular Top Plate The top platform is where you bolt the Top Plate to. Seaview developed the Top Plate to make product selection easier for the customer and to enhance the look of these mounts. Long gone are the days of top plates with a bunch of holes in them.

Venus GX Control - No Display Features: Venus GX The Venus GX provides intuitive control and monitoring for all Victron power systems. The list of Victron products that can be connected is endless: Inverters, Multis, Quattros, MPPT solar chargers, BMV battery monitors, Lynx Ion + Shunt and more.  VRM Online Portal All readings are forwarded to our free remote monitoring website: the VRM Online Portal. To get an impression, try the demo on https://vrm.victronenergy.com. See also the screenshots below.  Remote Console on VRM The way to access the device for setting up, as well as monitoring, is via Remote Console. Either via VRM, via the built-in WiFi Access Point, or on the local LAN/WiFi network.  Automatic genset start/stop A highly customizable start/stop system. Use state of charge, voltage, load and other parameters. Define a special set of rules for quiet times, and optionally a monthly test run.  Data logging When connected to the internet, all data is sent to the VRM Portal. When there is no internet connection available, the Venus GX will store the data internally, up to 48 hours. By inserting a micro SD-card or USB stick, more data can be stored. These files can then be uploaded to the VRM Portal, or offline converted with the VictronConnect app, for analysis. Supported products - Multis and Quattros, including split-phase and three-phase systems. Monitoring and control (on/off and current limiter). Changing configuration is possible (only remotely via the internet, not without an internet connection). - EasySolar 1600VA - BlueSolar MPPT Solar Chargers with a VE.Direct port. - BlueSolar MPPT 150/70 and the MPPT 150/85 with VE.Can port. - SmartSolar MPPT 150/70 and the MPPT 150/100 with VE.Can port. When multiple BlueSolar MPPTs or SmartSolar MPPTs with VE.Can are used in parallel, all the information is combined as one. See also our blog-post about synchronizing multiple MPPT 150/70 solar chargers. - BMV-700 family can be connected directly to the VE.Direct ports on the Venus GX. Use the VE.Direct Cable for this. - BMV-600 family can be connected to the VE.Direct ports on the Venus GX. Requires an accessory cable. - Lynx Ion + Shunt - Lynx Ion BMS - Lynx Shunt VE.Can - Skylla-i battery chargers - NMEA2000 tank sensors - A USB GPS can be connected to the USB port. The data is sent to the VRM Portal for tracking purposes. The map on VRM will show the latest position. - Fronius PV Inverters When more than two VE.Direct products must be connected, USB can be used. Warranty Info WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Please contact your dealer for any returns, repairs or support issues related to this product.

DRS6AX 6kW UHD Digital Radar with Pedestal, 4' Open Array Antenna & 15M Cable DRS6AX "X-Class" a whole new class of Radar! Pushing the boundaries of what is possible with conventional Radar technology, DRS6AX "X-Class" marks yet another leap forward for Furuno. Improved in almost all aspects, DRS6AX "X-Class" Radar features improved short range detection, as well as an impressive long range detection of up to 120 nautical miles. The redesigned pedestal unit is 20% lighter than previous DRS6AX model and features an updated motor for significantly lower noise levels. Combined with an updated smart-connector cable, installation and maintenance is simpler than ever before. Fast Target Tracking™ function adopted from our commercial Radar FAR3000, is also available on the DRS6AX "X-Class." Target course and speed vectors are displayed instantly with the press of a button. Target vectors increase situational awareness and can increase overall safety on your vessel. Features: 6kW Power Output Enhanced target detection, both short and long range Minimum detection range of just 20M Fast Target Tracking™ Bird Mode Pedestal unit, 20% lighter than previous DRS6A unit, updated low noise motor No PSU required, decreasing total costs Easy installation without the need to open pedestal unit Smart-connector cable  Antenna - XN12A/4 is a 4' Open Array Antenna with a horizontal beam width of 1.85 degrees  15M Cable Compatible with NavNet TZtouch and NavNet TZtouch2 and NavNet TZtouch3 (not compatible with NavNet 3D or earlier NavNet models) The DRS6AX is a 24V system; a converter will be required for use with 12V power systems This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

DRS6AX 6kW UHD Digital Radar with Pedestal, 6' Open Array Antenna & 15M Cable DRS6AX "X-Class", a whole new class of Radar! Pushing the boundaries of what is possible with conventional Radar technology, DRS6AX "X-Class" marks yet another leap forward for FURUNO. Improved in almost all aspects, DRS6AX "X-Class" Radar features improved short range detection, as well as an impressive long range detection of up to 120 nautical miles. The redesigned pedestal unit is 20% lighter than previous DRS6AX model and features an updated motor for significantly lower noise levels. Combined with an updated smart-connector cable, installation and maintenance is simpler than ever before. Fast Target Tracking™ function adopted from our commercial Radar FAR3000, is also available on the DRS6AX "X-Class." Target course and speed vectors are displayed instantly with the press of a button. Target vectors increase situational awareness and can increase overall safety on your vessel. Features: 6kW Power Output Enhanced target detection, both short and long range Minimum detection range of just 20M Fast Target Tracking™ Bird Mode Pedestal unit, 20% lighter than previous DRS6A unit, updated low noise motor No PSU required, decreasing total costs Easy installation without the need to open pedestal unit Smart-connector cable  Antenna - The XN13A/6 is a 6' Open Array Antenna that has a horizontal beam width of 1.2 15M Cable Compatible with NavNet TZtouch and NavNet TZtouch2 and NavNet TZtouch3 (not compatible with NavNet 3D or earlier NavNet models) The DRS6AX is a 24V system; a converter will be required for use with 12V power systems This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Simrad/Lowrance/B&G/Sitex 4' Open Array Mounting Plate With Edson's Vision Series Mounting System, you can select your desired Mounting Plate to best fit your electronics. Edson's 68570 Vision Series Mounting Plate is designed for Simrad,  B&G,  Lowrance, and Sitex 4ft Open Arrays (TX06S1, NS007003).  Specifications: Mounting Plates are required to complete an Edson Vision Series Mounting System.  Base mounts sold separately

OP12 Autopilot Controller The OP12 wired remote seamlessly integrates with Simrad autopilot systems to provide intuitive mode control, course adjustments, and power steering. Designed to complement the low-profile design of Simrad glass bridge instruments and displays, this remote can be combined with the IS42 Colour Instrument Display to create a standalone autopilot controller, or used as a dedicated autopilot keypad for GO, NSS and NSO evo2 multifunction displays. Features: Intuitive operation Easy installation Combine with an IS42 display for full autopilot control Compatible with Simrad AC12, AC42, NAC-2 and NAC-3 autopilot computers Use alongside NSS & NSO evo2 MFD's as an additional Autopilot Controller Low-profile glass helm design Low power consumption Certified NMEA 2000® connectivity Specifications: Dimensions: 60 x 115 x 32mm (2.4" x 4.5" x 1.3") Weight: 0.12kg (0.3lbs) Power Consumption: 1.4 Watts Network Load: 3 LEN Color: Black Environmental Protection, Waterproof: Waterproof rating: IPx7 Environmental Protection, Humidity: Up to 95% RH Compass Safe Distance: 300mm (1.0") Temperature Operating: -15 to +55°C (5°F to +131°F) Temperature Storage: -30 to +70 °C (-22 to +158 °F)

OceanBridge Control Unit The OceanBridge is a patented multizone lighting controller designed specifically for controlling all of the boat’s lights from an MFD, smartphone, or tablet. This innovative system allows users complete control of the entire OceanLED range of lights and accessories, as well as most third-party (DMX or on/off) DC-powered lights. The OceanBridge gives users complete control over color change, music sync, color fade, color transitions, brightness, zone creation, and OceanLED's patented movement-to-color functionality. Ideal for All Types of Boats At OceanLED, they understand the need to control all the boat lights from a single interface. Whether users have a small rib, large sport fishing boat, sailing yacht, or motor cruiser, the OceanBridge ensures easy and seamless control. The small unit is quick to install and doesn’t require much space. Control is easy via an MFD, or if the boat isn’t equipped with an MFD, simply control the lights via a smartphone or tablet, thanks to the integrated Wi-Fi module. Custom Scene & Zone Control With the OceanBridge, you can create an incredible 10 lighting zones as standard and up to 10 lighting scenes. No matter how large the vessel is, the agility of fully customizable control means the possibilities are almost endless. OceanBridge scenes allow users to save pre-set lighting colors and modes, which can be easily assigned to any zone. Users can set OceanLED's unique sweep scene mode to any zone using lights of the same type, creating the ‘Knight Rider’ effect. The additional flexibility of adding up to four instant-on switches means control can be tailored to specific areas of the boat. Control Lights & Accessories Easily The advanced OceanBridge system allows you to create and control a lighting system with up to 64 (DMX or on/off) lights at one time; even non-OceanLED lights can be added to the system. With the use of splitters, the system can be expanded to over 150 lights. Plug-and-play control compatibility is ensured thanks to the system NMEA 2000 compatibility and supporting MFD network connectivity. You now have complete flexibility in one system. Intelligent Lighting Commands The OceanBridge makes syncing the underwater and onboard lights to music effortless. With the built-in AUX socket or via Bluetooth audio connection, users can set light colors and modes to automatically match music using the base, midtones, and treble. Alternatively, the unique addition of the built-in gyroscope allows the system to go even further. OceanLED's patent-pending design allows users to set the lights to change with the movement of a boat. OceanLED's timer function goes a step further, allowing users to trigger specific scenes at set times of the day or night. Universal Compatibility and Control The OceanBridge is compatible with all major MFD units, including Garmin, Simrad, Lowrance, B & G, Raymarine, and Furuno. OceanLED built the OceanBridge with complete accessibility in mind; no matter the boat, MFD, or lights, the OceanBridge is the complete control solution. Features: Color control Expandable system Touch-sensitive Universal compatibility  10 dynamic scenes 10 lighting zones Dynamic audio control Wave Motion Mode Technical Specifications: Water Protection Rating: IP66 Power Consumption: 6W (500mA @12V DC) Operating Voltage: 12/24V DC (Max 32V DC) Power Input: NMEA 2000 Connector Port Input Cable Glands: IP68 Output Cable Glands: IP68 Wi-Fi: Built-In External Switch Inputs: Supports Four External Switch Inputs Bluetooth: Built-In On-board Sensors: Gyroscope Sensor & Thermal Sensor Operating Temperature: -10°C to 50°C ambient Network Connections: NMEA 2000 connection & Ethernet connection Audio: 1 x Audio-In 3.5mm | 1 x Audio-Out 3.5mm Physical Specifications: Dimensions: 210mm x 91m x 65mm Weight:    490g Material: Robust Polycarbonate

Second Control Unit for NavPilot 711C Kick back, relax and let NavPilot steer you to your destination! FURUNO's NavPilot is a revolutionary autopilot with a sunlight viewable display designed for a variety of vessels. It utilizes a self-learning and adaptive software algorithm, and plays the ultimate role in course-keeping capability. NavPilot dynamically adjusts essential parameters during navigation, such as vessel speed, trim, draught, tide and wind effects, dead band, weather and more. These parameters are stored in system memory and continuously optimized to make the NavPilot more versatile. The NavPilot 711C features a color day/night graphic display, offering much better sunlight viewability during the day while not affecting your night vision when the sun goes down. Self-learning and adaptive software From the first dock-side setup through the last voyage you made, NavPilot continues to learn your vessel's steering characteristics, allowing for real-time, dynamic adjustments to make the boat's steering more accurate. SAFE HELM and POWER ASSIST features provide Efficient and Effective Helm Steering Control The optional SAFE HELM and POWER ASSIST features provide a unique interface to the vessel's hydraulic hand steering system, providing unrivaled comfort and control of steering directly from any manual helm on the vessel. These two modes greatly reduce steering effort and enhance the safety of your autopilot. The POWER ASSIST mode incorporates the SAFE HELM concept and provides speed-based, power assisted steering, which greatly reduces manual helm effort in maneuvering situations. POWER ASSIST is a unique helm-activated assisted steering feature that can augment or replace separate electric and power-robbing, engine-driven power steering systems on many vessels. POWER ASSIST reduces steering system complexity and costs while increasing economy. SAFE HELM and POWER ASSIST modes will require the optional FPS8 Power Steering Module and an appropriate HRP Pumpset. If you are interested in utilizing the "SAFE HELM" and "POWER ASSIST" features, it is highly recommend that, when installing the NavPilot 700 Series Autopilot, the optional FPS8 Power Steering Module is purchased and installed at the same time. This will eliminate the need to re-plumb the hydraulic system and run additional connection cables in the future. FishHunter mode FishHunter mode is a unique feature of FURUNO's NavPilot series. Find a fish target with your FURUNO sonar/sounder or bird target with your FURUNO radar and feed it to the NavPilot The NavPilot will activate the FishHunter mode to perform square, zigzag, circle, orbit, spiral or figure-eight maneuvers around the specified target at a user selected distance. This feature can also be used for Man Overboard (MOB). Furuno's NavPilot series is designed to match the NavNet 3D, FI-50 Instrument series and other navigation equipment. The "Plug and Play" CAN bus interface allows for easy installation and exceptional interface ability. Features: NavPilot 711C second control unit, single din Color day/night graphic display offers improved sunlight viewability during the day while not affecting vision when the sun goes down Revolutionary SAFE HELM and POWER ASSIST option brings unrivaled steering comfort and control at the helm (This feature will be available in an upcoming software update) Selectable "Economy" and "Precision" Navigation Modes combine adaptive technology providing fuel and power savings of up to 2.5% or more "Precision" XTE accuracy: within 18' Dual NMEA2000 network interface and Furuno CAN bus interface provides isolation and redundancy for safety Simplified activation set-up by on-screen wizard Perfect for inboard or outboard power boats and sail boats Simple one-touch mode selection enables flexible steering and course control Perfect cosmetic match with NavNet TZtouch Mix and match up to 6 displays in a single network WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

JCU-1 Joystick Control Unit for M-Series - RJ45 Connection The M-Series controller is simple to use, provides precise system control, and lets users access all of the important camera functions with push-button controls. Controller Functions: Heated LCD screen - Instantly displays system status User-programmable "hot key" for commonly used functions Scene selection allows the operator to optimize the system's performance for specific situations - Night Running, Day Running, Night Docking, and Man Overboard User-selectable color palettes change the video display mode for easier viewing based on operator preference User-programmable Home button allows the operator to point the pan/tilt camera to pre-defined positions with the push of a button Precision proportional pointing control is provided through a custom, sealed, 8-way iDrive style control knob Backlit for easy nighttime readability; the sealed buttons are easy to see and provide positive tactile feedback The controller is fully sealed for survival in a maritime environment, and meets IPx6 standards Install as many control stations around your vessel as you want, thanks to the system's easy Ethernet connectivity

JCU-1 Joystick Control Unit & Poe Injector Kit The M-Series controller is simple to use, provides precise system control, and lets users access all of the important camera functions with push-button controls. Controller Functions: Heated LCD screen - Instantly displays system status User-programmable "hot key" for commonly used functions Scene selection allows the operator to optimize the system's performance for specific situations - Night Running, Day Running, Night Docking, and Man Overboard User-selectable color palettes change the video display mode for easier viewing based on operator preference User-programmable Home button allows the operator to point the pan/tilt camera to pre-defined positions with the push of a button Precision proportional pointing control is provided through a custom, sealed, 8-way iDrive style control knob Backlit for easy nighttime readability; the sealed buttons are easy to see and provide positive tactile feedback The controller is fully sealed for survival in a maritime environment, and meets IPx6 standards Install as many control stations around your vessel as you want, thanks to the system's easy Ethernet connectivity Power Over Ethernet Injector - 12V FLIR's 12V Power Over Ethernet Injector is a key component in connecting your FLIR maritime thermal imaging camera to an Ethernet-equipped Joystick Control Unit.

Compact i16VSD Marine Air Conditioner Unit - 230V - 16,000 BTU Velair's i-line VSD (Variable Speed Drive) series units feature built-in inversion technology for better efficiency, less power consumption and no more more start-up power spikes.  VSD units offer top comfort with no temperature or humidity fluctuation and works properly even on smaller generators and weak shore power. Self-contained VSD air conditioners provide the best of the existing technology - compressor featuring a  brushless DC motor and an inverter that constantly controls speed and cooling power delivered.  The compressor continuously changes its running speed depending on ambient and set temperature.  The compressor also operates at maximum power to cool rapidly. Velair Part Number 69750KW Features: VSD (Variable Speed Drive) eliminates start-up spikes Highest energy efficiency Minimal fan noise and vibration Reverse-cycle for heat pump function Constant temperature output maximizes comfort Cabin control display offers ease of use Smart Control iOS and Android App available to control all AC functions Technical Specifications: Input voltage - 230 V Refrigerant type - R410A Heat Pump - Yes Cooling Capacity - 16,000 BTU Maximum Air Flow - 550 m3/h Air Duct Diameter - 2" x 6" Sea Water Flow Rate - 4.5 gpm/17 l/min Dimensions (H x W x D) - 13.7" x 22.6" x 12" (34.7 x 57.5 x 30.6 cm)  Weight - 66.1 lbs (30 kg) In the Box: Self-contained AC unit Digital control and 26.25' (8 M) cable Instruction manual *Sold as an Individual This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Compact i16VSD  SMART Marine Air Conditioner Unit - 115V - 16,000 BTU (Generation 2) Velair's i-line VSD (Variable Speed Drive) series units feature built-in inversion technology for better efficiency, less power consumption, and no more start-up power spikes.  VSD units offer top comfort with no temperature or humidity fluctuation and work properly even on smaller generators and weak shore power. Self-contained VSD air conditioners provide the best of the existing technology - a compressor featuring a  brushless DC motor and an inverter that constantly controls the speed and cooling power delivered.  The compressor continuously changes its running speed depending on the ambient and set temperature.  The compressor also operates at maximum power to cool rapidly. Features: VSD (Variable Speed Drive) eliminates start-up spikes Highest energy efficiency Minimal fan noise and vibration Reverse-cycle for heat pump function Constant temperature output maximizes comfort The cabin control display offers ease of use Smart Control iOS and Android App available to control all AC functions Generation Two Difference: Removable electric box for compact applications Technical Specifications: Input voltage: 115 V Refrigerant type: R32 Heat Pump: Yes Cooling Capacity - 16,000 BTU Maximum Air Flow: 550 m3/h Air Duct Diameter: 2" x 6" Sea Water Flow Rate: 4.5 gpm/17 L/min Dimensions L x H x P (with electrical box): 25.6" x 13" x 14" (650 x 330 x 355 cm)  Weight: 61.7 lbs (28 kg) In the Box: Self-contained AC unit Digital control and 26.25' (8 M) cable Instruction manual *Sold as an Individual This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Power A Mark II™ Electronic Control System - Single Engine w/out Trim The easy to install Power A Mark II™ control system provides fingertip operation of throttle and shift levers. Using reliable and precise digital data transmission, this single or dual function control system is specifically designed to work on mechanically controlled as well as electronic and electro-hydraulic gas and diesel inboards, sterndrives and outboards. The Power A Mark II™ comes with many features including Dock Assist, which offers the operator the opportunity to reduce the sensitivity of the throttle function for easier dockside handling. Other standard features include RPM Synchronization, which reduces engine vibration and improves fuel economy, a High Idle feature to increase RPM where higher idle is necessary for cold engine operations, a programmable Trolling Valve Control and neutral Warm Up. The stylish and ergonmically designed control makes the Power A Mark II™ suitable for many types of applications ranging from sport boats, yachts and commercial applications. Available with and without trim, the control has audible and visual interfaces which alert the operator to the current status of the control system. With the ability to control up to 2 engines from up to 4 different stations, the Power A Mark II™ is a modular and flexible system with simple to install components. The unique Control Unit Display of the Power A Mark II™ provides simple touch pad programming with descriptive information regarding the set up, tuning and diagnostics of the system. The Power A Mark II™ is a system that can replace mechanical controls either on fully mechanical engines, or on fully electronical engins, or on engines with the combination of both characteristics. Technical Features: Single Lever/Dual Function and Dual Lever/Dual Function for shift, throttle and trolling Up to 4 control stations Power supply: min 9 max 32V Working temperature: -25°C to +75°C Control station functions: - Station Select - Engines Warm up - High idle - Docking - Engine synchronization - Trolling valve Electronic throttle outputs: - Voltage (double output 0 - 5V and 0 - 2,5V) - PWM (0-100%, frequency from 200Hz to 1kHz) - Current (4 - 10mA) Digital Throttle Output: - SAE J 1939 - NMEA 2000 Trolling valve output - Voltage (0 - 5V) - PWM (0-100%, frequency from 100Hz to 1 kHz) - Current (4 - 20mA) Electric shift control: - 2 or 3 ON/OFF or proportional solenoids - Shift delays fully settable Safety Devices: Start in-gear PROTECTION(start inhibition with shifted gear) Audible and visual diagnostic failure alarm (READABLE MESSAGES ON THE CONTROL UNIT DISPLAY) Proportional shift delays Programmable working parameters Meets CEI EN 60945 standards EMC Certification and CE MARK Conforms with: CEI EN60945 UNI-EN ISO 11547 COMPATIBILITY WITH ALL MECHANICAL THROTTLE ENGINES COMPATIBILITY WITH ALL ELECTRONIC THROTTLE ENGINES Cummins, Detroit Diesel, Scania, Iveco, FPT, Lombardini, VM Motori, FNM, Yanmar, CMD-Volkswagen, Hyundai ecc. The Power A Mark II™ electronic system actuators cannot be installed in those rooms where ignition-proof devices are required.