Mercury Twist-Lock Female Tank Fitting - Zinc This Attwood Mercury/Mariner Engine Fuel Hose Fitting ensures precise and effective installation of a fuel line to a Mercury/Mariner-brand engine. This Fuel Hose Fitting is a female twist-lock fitting that connects to the tank end of the fuel line. It is a 2-piece fitting with a 90-degree elbow. It is made of acetal, it has a 1/4-inch NPT thread, and it mates to fitting 8892-6 and 14532-6. Features: Provides precise installation of a fuel line to a Mercury/Mariner-brand engine 1/4" NPT (National Pipe Thread) 2-piece fitting with a 90-degree elbow Material Construction: Zinc *Specifically mates to Attwood part numbers: 8892-6 & 14532-6

Mercury Twist-Lock Female Tank Fitting - Nylon This Attwood Mercury/Mariner Engine Fuel Hose Fitting ensures precise and effective installation of a fuel line to a Mercury/Mariner-brand engine. This Fuel Hose Fitting is a female twist-lock fitting that connects on the tank end of the fuel line. It is a 2-piece fitting with a 90-degree elbow. It is made of acetal, it has a 1/4-inch NPT thread, and it mates to fitting 8892-6 and 14532-6. Features: Provides precise installation of a fuel line to a Mercury/Mariner-brand engine 1/4" NPT (National Pipe Thread) 2-piece fitting with a 90-degree elbow Material Construction: Nylon *Specifically mates to Attwood part numbers: 8892-6 & 14532-6

Mercury Twist-Lock Male Hose Fitting - Zinc This Attwood hose fitting is suitable for use with leaded, unleaded, ethanol-blended, and alcohol-blended fuels. Barbed fitting fits 3/8" I.D. hose. Clamps are not included. Use thread sealant on all threads.  Features: Mercury/Mariner fuel fitting (inch) 3/8" Barb Material Construction: Die-cast zinc *Specifically mates to Attwood part numbers: 8882-6 & 14530-6

Johnson/Evinrude/OMC (Outboard Marine Corporation) Female Hose Fitting - Tank Or Engine End - 5/16" Barb For use on both ends of the fuel line to connect tank fitting and motor. The hose barb fits a 5/16" inner diameter hose. Features: Johnson, Evinrude, and OMC fitting Tank or Engine End Material Construction: Acetal *Specifically mates to Attwood part number: 8883-6

Johnson/Evinrude/OMC (Outboard Marine Corporation) Female Hose Fitting - Tank Or Engine End - 3/8" Barb For use on both ends of the fuel line to connect tank fitting and motor. The hose barb fits a 5/16" inner diameter hose. Features: Johnson, Evinrude, and OMC fitting Tank or Engine End Material Construction: Acetal *Specifically mates to Attwood part number: 8883-6

Johnson/Evinrude/OMC (Outboard Marine Corporation) Male Tank Fitting - 1/4" NPT This Attwood male tank fitting is suitable for use with leaded, unleaded, ethanol-blended, and alcohol-blended fuels. The threaded fitting has a 1/4" male NPT thread and uses thread sealant on all threads. Clamps are not included. Features: Johnson, Evinrude, and OMC fitting Quick-connect ¼-inch male thread makes installation easy Solid machined brass for dependable performance, peace of mind *Specifically mates to Attwood part numbers: 8889LP6 & 88FHE516-6

Mercury Fuel Line Kit - 3/8" Dia. x 6' Length with Fuel Demand Valve This EPA-certified Attwood Mercury Fuel Line Kit reliably delivers fuel to your Mercury engine and provides the ultimate in performance, safety, and value. The kit comes with a 6-foot-long, 3/8-inch diameter low-permeation fuel line that is designed to prevent kinking and hardening, and is rated up to 100 degrees C. Features: These Attwood Fittings Are Included: Tank fitting 8838TM6, tank end hose fitting 8838HF6, and engine end hose fitting 8896LP6 It also includes a multi-layer low-permeation primer bulb and a Fuel Demand Value that eliminates engine flooding and spillage by preventing pressurized fuel from reaching the engine. Hose and tank fittings come with pre-applied thread sealant For Mercury engines and tanks Tank Side: Universal Sprayless Quick-Connect *This Fuel Line Kit is compatible with Ethanol blended fuels and with all OEM-brand engines

Mercury Female Hose Tank Fitting - 3/8" Barb Connect your tank and fuel lines with confidence; the durable Acetal construction holds up to lead, unleaded, and alcohol-based fuels. Specifically designed for Mercury/Mariner Brand engines and tanks. Features: Easy installation with barbed fittings for 3/8 inch I.D. (interior diameter) hose (purchase hose clamps separately) Mercury/Mariner Tank Fitting Extremely Versatile: Designed for leaded, unleaded, and alcohol-blended fuel (inch) 3/8" Barb Hose Female *Specifically mates to Attwood part number: 8873-6

Mercury Fuel Line Kit - 3/8" Diameter x 6' Length (Pre-1998) This EPA-certified Attwood Mercury (Pre-1998) Fuel Line Kit reliably delivers fuel to your Pre-1998 Mercury engine and provides the ultimate in performance, safety, and value. The kit includes a 6-foot-long, 3/8-inch diameter low-permeation fuel line that is designed to prevent kinking and hardening, and is rated up to 100 degrees C. Features: These Attwood Fittings Are Included: Tank fitting 8838TM6, tank end hose fitting 8838HF6, and engine end hose fitting 8893-6 For Mercury Pre-1998 engines and tanks It also includes an award-winning Universal Sprayless Connector (hose and tank fittings with pre-applied thread sealant) There’s also a multi-layer, low-permeation primer bulb with connections engineered for strength, durability, and leak resistance *This Fuel Line Kit is compatible with Ethanol blended fuels and with all OEM-brand engines.

Mercury Fuel Line Kit - 3/8" Diameter x 6' Length (1998 & Newer) This EPA-certified Attwood Universal Fuel Line Kit reliably delivers fuel to your Mercury engine and provides the ultimate in performance, safety, and value. The kit includes a 6-foot-long, 3/8-inch diameter low-permeation fuel line that is designed to prevent kinking and hardening, and is rated up to 100 degrees C. It also includes a Fuel Demand Value that eliminates engine flooding and spillage by preventing pressurized fuel from reaching the engine. Features: These Attwood Fittings Are Included: Tank fitting 8838TM6, tank end hose fitting 8838HF6, and hose fitting engine end 8896LP6 Universal for any engines and tanks In-Line Fuel Demand Valve The kit also has a multi-layer, low-permeation primer bulb with connections engineered for strength, durability, and leak resistance *This Fuel Line Kit is compatible with Ethanol blended fuels and with all OEM-brand engines

Mercury/Yamaha Female Hose Engine Fitting - 3/8" Barb Connect your tank and fuel lines with confidence; the solid machined-brass construction holds up to leaded, unleaded, and alcohol-based fuels for. Features: Solid machined brass for dependable performance, peace of mind Hose female  Tank or Engine End Replaces Yamaha 6Y1-24305-03 *Specifically mates to Attwood part number: 8897-6

Suzuki 3/8" Barb Female Hose Fitting - Under 75HP Quick-connect female fitting for use on both ends of fuel lines to connect to tank fitting and engine. Fuel tank fittings and hose fittings are suitable for use with leaded, unleaded, ethanol-blended, and alcohol-blended fuels. The barb fitting fits a 3/8" I.D. hose. Also, clamps are not included, and use thread sealant on all threads. Features: Suzuki-brand engines and tanks Fitted for models under 75HP (Small Bore) Material Construction: Chrome-plated Brass *Specifically mates to Attwood part number: 14509-6

Mercury Tank Fitting - 1/4" NPT Thread Connect your tank and fuel lines with confidence; solid machined brass construction holds up to lead, unleaded, and alcohol-based fuels. Specifically designed for Mercury/Mariner Brand engines and tanks. Features: Solid machined brass for dependable performance, peace of mind Quick-connect ¼-inch male thread makes installation easy Extremely Versatile: Designed for leaded, unleaded, and alcohol-blended fuel 1/4" NPT (National Pipe Thread) Specifically designed for Mercury/Mariner Brand engines and tanks *Specifically mates to Attwood part number: 8890LP6

Yamaha Tank Fitting - 1/4" NPT Thread Connect your tank and fuel lines with confidence. Solid machined brass construction holds up to lead, unleaded, and alcohol-based fuels. Designed for Yamaha Brand engines and tanks and fits select Mercury/Mariner Brand engines. Features: Quick-connect 1/4-inch male thread makes installation easy Solid machined brass for dependable performance and peace of mind Designed for Yamaha and select Mercury/Mariner brand engines that use leaded, unleaded, and alcohol-blended fuel *Specifically mates to Attwood part numbers: 8896LP6 & 88FHY516-6

Johnson/Evinrude Fuel Line Kit - 3/8" Diameter x 6' Length (No Tank Fitting) This Attwood Fuel Line Kit is a reliable replacement for the original equipment on Johnson and Evinrude engines and tanks. This kit includes a 6-foot-long, 3/8-In. diameter fuel line and a multi-layer, low-permeation primer bulb. Features: These Attwood Hose Fittings Are Included: Two (2) 8889LP6 hose fittings for the tank end and for the engine end For Johnson/Evinrude engines and tanks *No Fuel Demand Valve or Tank Fitting is included in this kit