|
Scot Pump 48451X-1/2 HP MPU 1/2 HP 1PH
Pump
• Seawater Bronze case, impeller adapter
• Seawater Bronze 7/8” shaft
• Impeller keyed to stub shaft and secured by washer and locking assembly
• O-ring case gasket
Motor
• Standard NEMA frame motor
• 1 and 3 phase
|
1785.00 |
|
|
Scot Pump 48377 2HP 3450 220V 50/60 less Strainer
The suction Sea Strainer has a heavy, clear, removable acrylic cover to provide access to the strainer basket. The strainer basket is easy to remove. It should be checked daily for debris and sea weed that could appreciatively reduce pump capacity. A fouled suction line will cause a pump to cavitate. Cavitation can destroy a pump case and impeller in a short period of time.
Pump
• Seawater Bronze case, impeller, adapter
• Seawater Bronze 7/8 inch shaft
• Mechanical seal is 7/8 inch diameter
• Impeller is keyed to stub shaft and
secured by a washer and locking
assembly.
• O-Ring case gasket
Motor
• Standard NEMA frame motor
|
2198.10 |
|
|
Scot Pump 35067 Motor Pump Unit 3.44" Impeller
• Compact
• Enclosed Switch Compartment
Pump
• All Bronze marine centrifugal pump Freshwater or seawater applications
• Precision machined to close tolerances for consistent performance.
• Hardware - Type 303 stainless steel
• Semi-open impeller handles solids
• 3.44" Impeller mounted on motor shaft
• Heavy-duty, designed for continuous 24 hour – 7 day operation.
Shaft Seal
• Rated at 75 PSI – 5 BAR
• Seawater Buna rubber parts, ceramic stationary and carbon rotating element, stainless steel spring and metal components
Motor – 2 Pole
• Meets Coast Guard ignition protected requirements. The thermal protector and starting switch are in the enclosed outlet cover.
• Sealed ball bearings
• Single-phase capacitor start 50 Hz - 110/220 Volt 60 Hz – 115/230 Volt
• Dual frequency 50 Hz or 60 Hz single phase motors are available
• Stainless steel shaft
• Three phase motors are not available
|
1000.62 |
|
|
Scot Pump 35068 MOTOR & PUMP 56J FRAME with 3.44" Impeller
Pump
• All Bronze marine centrifugal pump Freshwater or seawater applications
• Precision machined to close tolerances for consistent performance.
• Hardware - Type 303 stainless steel
• Semi-open impeller handles solids
• Heavy-duty. Use for continuous 24 hour – 7 day operation.
• Stainless steel shaft.
Shaft Seal
• Rated at 75 PSI – 5 BAR
• Seawater Buna rubber parts, ceramic stationary and carbon rotating element, stainless steel spring and metal components
Motor – 2 Pole
• Totally enclosed fan cooled IP-44 motors meet marine, European, and Coast Guard ignition protected requirements.
• Sealed ball bearings
• Single-phase capacitor start 50 Hz - 110/220 Volt 60 Hz – 115/230 Volt
• Motors are dual frequency 50 Hz or 60 Hz
• Three phase motors are not available
|
1031.22 |
|
|
Scot Pump 48377 Motor & Pump 3/4HP Less Strainer
The suction Sea Strainer has a heavy, clear, removable acrylic cover to provide access to the strainer basket. The strainer basket is easy to remove. It should be checked daily for debris and sea weed that could appreciatively reduce pump capacity. A fouled suction line will cause a pump to cavitate. Cavitation can destroy a pump case and impeller in a short period of time.
Pump
• Seawater Bronze case, impeller, adapter
• Seawater Bronze 7/8 inch shaft
• Mechanical seal is 7/8 inch diameter
• Impeller is keyed to stub shaft and secured by a washer and locking assembly.
• O-Ring case gasket
Motor
• Standard NEMA frame motor
|
1933.34 |
|
|
Scot Pump 48377 MOTOR & PUMP with STRAINER 3/4HP 1PH
The suction Sea Strainer has a heavy, clear, removable acrylic cover to provide access to the strainer basket. The strainer basket is easy to remove. It should be checked daily for debris and sea weed that could appreciatively reduce pump capacity. A fouled suction line will cause a pump to cavitate. Cavitation can destroy a pump case and impeller in a short period of time.
Pump
• Seawater Bronze case, impeller, adapter
• Seawater Bronze 7/8 inch shaft
• Mechanical seal is 7/8 inch diameter
• Both Input and Output Ports are 1.5"
• Impeller is keyed to stub shaft and
secured by a washer and locking
assembly.
• O-Ring case gasket
Motor
• Standard NEMA frame motor
|
2624.59 |
|
|
Scot 48451X-1.5HP Motor and Pump
48451X
Impeller: 4.75"
Ports: 1.5 X 1.5 NPT
1.5 HP
TEFC 2850/3450 RPM
1/50/60HZ
|
2208.30 |
|
|
Scot Pump 48377 1/2 HP ODP LESS STRAINER
The suction Sea Strainer has a heavy, clear, removable acrylic cover to provide access to the strainer basket. The strainer basket is easy to remove. It should be checked daily for debris and sea weed that could appreciatively reduce pump capacity. A fouled suction line will cause a pump to cavitate. Cavitation can destroy a pump case and impeller in a short period of time.
Pump
• Seawater Bronze case, impeller, adapter
• Seawater Bronze 7/8 inch shaft
• Mechanical seal is 7/8 inch diameter
• Impeller is keyed to stub shaft and
secured by a washer and locking
assembly.
• O-Ring case gasket
Motor
• Standard NEMA frame motor
|
1758.48 |
|
|
Scot Pump 35066 MOTOR/PUMP AB 1X3/4 1/3HP
• Compact
• Enclosed Switch Compartment
Pump
• All Bronze marine centrifugal pump Freshwater or Seawater applications
• Precision machined to close tolerances for consistent performance.
• Hardware - Type 300 stainless steel
• Semi-open impeller handles solids to 5/16 inch (7mm)
• Impeller mounted on motor shaft
• Heavy-duty, designed for continuous 24 hour – 7 day operation.
Shaft Seal
• Rated at 75 PSI – 5 BAR
• Seawater Buna rubber parts, ceramic stationary and carbon rotating element, stainless steel spring and metal components.
Motor – 2 Pole
• Meets Coast Guard ignition protected requirements. The thermal protector and starting switch are in the enclosed outlet cover.
• Sealed ball bearings
• Single-phase capacitor start – 115/230 Volt
• Dual frequency 50 Hz or 60 Hz
• Stainless steel shaft.
• Three phase motors are not available
This pump is no longer made with the plug at the bottom, Scot stoped building them that way.
|
1000.62 |
|
|
Scot Pump 35069 MOTOR/PUMP 1/3HP 1X3/4 BRZ
Pump
• All Bronze marine centrifugal pump Freshwater or seawater applications
• Precision machined to close tolerances for consistent performance.
• Hardware - Type 303 stainless steel
• Semi-open impeller handles solids
• Impeller mounted on motor shaft
• Heavy-duty, designed for continuous 24 hour – 7 day operation.
• Stainless steel shaft
Shaft Seal
• Rated at 75 PSI – 5 BAR
• Seawater Buna rubber parts, ceramic stationary and carbon rotating element, stainless steel spring and metal components
Motor – 2 Pole
• Totally enclosed fan cooled IP-44 motors meet marine, European, and Coast Guard ignition protected requirements.
• Sealed ball bearings
• Single-phase capacitor start 50 Hz - 110/220 Volt 60 Hz - 115/230 Volt
• Three phase motors are not available
• Dual frequency 60 Hz or 50 Hz single phase motors are available Marine Bronze Motorpump™ 1 x 3/4 NPT 2 Pole 50-60 Hz 2900-3450 RPM
|
1015.92 |
|
|
Scot Pump 48451X-1HP MPU 1HP 1PH 56C 4.00
Pump
• Seawater Bronze case, impeller adapter
• Seawater Bronze 7/8” shaft
• Impeller keyed to stub shaft and secured by washer and locking assembly
• O-ring case gasket
Motor
• Standard NEMA frame motor
• 1 and 3 phase
This is the complete motor and pump
|
1966.56 |
|
|
Scot Pump 48451X-3/4HP MPU 3/4HP 1PH 56C
Pump
• Seawater Bronze case, impeller adapter
• Seawater Bronze 7/8” shaft
• Impeller keyed to stub shaft and secured by washer and locking assembly
• O-ring case gasket
Motor
• Standard NEMA frame motor
• 1 and 3 phase
|
1854.36 |
|
|
Scot Pump 48451X-4.00 WET END B48451X400PE 56C
|
1413.72 |
|
|
Scot Pump 48372X-3/4HP MPU 72 1PH 3/4HP 4 IMP ODP
Pump
Seawater Bronze case, impeller, adapter
Seawater Bronze 7/8 inch shaft
Mechanical seal is 7/8 inch diameter
Impeller is keyed to stub shaft and secured by a washer and locking assembly.
O-Ring case gasket
Motor – 2 Pole
Standard NEMA frame motor
|
1606.50 |
|
|
Scot Pump 48451X-3.75 Wet End 56C
|
1413.72 |
|