Universal in-line fuel filters.

Universal in-line fuel filters.

Water temperature sending unit, 3/8" - 18 NPT threads. Replaces: Mercruiser 97257A1, 806490T, Mercruiser Vazer 980613, Volvo 3853787.

Outboard Fuel Filter for 3/8 inch Lines Protect your carbureted engine by trapping pollutants before they even reach the engine itself. High-flow, in-line fuel filters will work with most outboard motors. Features:  Use with 3/8 inch fuel lines Works with most outboard motors A clear body allows visual inspection, making it easier to stay on top of maintenance High-strength, impact-resistant, and shatter-resistant construction is ideal for  tough conditions Disposable for ultimate convenience *Best to replace during winterize or spring start-up for optimum results

Shock - 3/8" Line - 3/8" Webbing - Blue The Sheaveless Black The obvious choice for those kitesurfers, paragliders, control line deflections and purchase systems that require a lightweight high load capacity block. Ultimate durability With no moving parts SHOCKS provide ultimate durability and are maintenance free. They are ideal where sand and grit would compromise a bearing system or where regular flushing out isn?t possible. Their gentle 3-dimensional geometry is kind on lines, but is strong enough to cope with poor leads. Soft attachment specialists SHOCKS are designed primarily for 'soft attachment'; spliced to a line end or lashed in place. The elongated attachment aperture is also ideal for webbing attachment, ensuring the intended orientation is maintained. Virtually limitless applications The applications for SHOCKS are virtually limitless, including numerous high performance dinghy and small sailboat rigging applications including tweakers, vangs, trapezes, cunninghams, barber haulers and kite bridles. They are also handy on larger boats for uses such as lazy jacks, sail covers, tie-downs, ladder and motor hoists. Hidden performance At a mere 2.5g (0.1 oz), SHOCKS are outstanding performers in the strength and weight stakes. The clever design and exacting finishing also provide excellent free running at moderate changes of angle. Small & hi-tech line specialists SHOCKS accept lines from 1.4mm (1/16") up to 8mm (5/16") and function just as well with hi-tech uncovered braids as with traditional double braids. Features: Performance & versatility Ultra lightweight Ultra compact Durable Color coded Impact resistant Small line optimised High load capacity Poor alignment tolerant Soft attachment compatible Grit & salt resistant Applications: Unlimited uses, including kitesurfing, paragliders, sports kites, power kites, stunt kites, depower kites, traction kites, for deflection or purchase system on control lines Materials: Anodized Aluminum Specifications: Rope Ø:1.4mm-10mm(1/16" - 3/8") Height:14.5mm(9/16") Width: 24.8mm(1") Length:36mm(1-7/16") B. L.:1,000kg(2,200lbs) Weight:12g(0.42oz)

Shock - 3/8" Line - 3/8" Webbing - Red The Sheaveless Black The obvious choice for those kitesurfers, paragliders, control line deflections and purchase systems that require a lightweight high load capacity block. Ultimate durability With no moving parts SHOCKS provide ultimate durability and are maintenance free. They are ideal where sand and grit would compromise a bearing system or where regular flushing out isn?t possible. Their gentle 3-dimensional geometry is kind on lines, but is strong enough to cope with poor leads. Soft attachment specialists SHOCKS are designed primarily for 'soft attachment'; spliced to a line end or lashed in place. The elongated attachment aperture is also ideal for webbing attachment, ensuring the intended orientation is maintained. Virtually limitless applications The applications for SHOCKS are virtually limitless, including numerous high performance dinghy and small sailboat rigging applications including tweakers, vangs, trapezes, cunninghams, barber haulers and kite bridles. They are also handy on larger boats for uses such as lazy jacks, sail covers, tie-downs, ladder and motor hoists. Hidden performance At a mere 2.5g (0.1 oz), SHOCKS are outstanding performers in the strength and weight stakes. The clever design and exacting finishing also provide excellent free running at moderate changes of angle. Small & hi-tech line specialists SHOCKS accept lines from 1.4mm (1/16") up to 8mm (5/16") and function just as well with hi-tech uncovered braids as with traditional double braids. Features: Performance & versatility Ultra lightweight Ultra compact Durable Color coded Impact resistant Small line optimised High load capacity Poor alignment tolerant Soft attachment compatible Grit & salt resistant Applications: Unlimited uses, including kitesurfing, paragliders, sports kites, power kites, stunt kites, depower kites, traction kites, for deflection or purchase system on control lines Materials: Anodized Aluminum Specifications: Rope Ø:1.4mm-10mm(1/16" - 3/8") Height:14.5mm(9/16") Width: 24.8mm(1") Length:36mm(1-7/16") B. L.:1,000kg(2,200lbs) Weight:12g(0.42oz)

Single-Hook Anchor Chain Tensioner for 3/8" Chain These fittings will securely tension and hold the anchor in the bow roller channel.  They will free up use of the bow cleat and prepare the anchor for sea condition assuring you peace of mind.  This fitting is not designed to take the strain of the rode of a boat at anchor.  "Single Hook" style has overall length of 12", the threaded hook has 1-1/2" of adjustment for ease of installation.

Applications for the March AC-1A-MD-3/8 Magnetic Drive Pump include photographic processing equipment, refrigeration systems, and water displays.   The AC-1A-MD-3/8 Part # 0115-0064-0300 has pumped Acetone, Ammonium Chloride, Ammonium Chloride, Ammonium Hydroxide, Citric Acid, Ethylene Glycol, Magnesium Nitrate, Potassium Carbonate, Sodium Borate, Fresh Water, Salt Water, and many more chemicals.  The AC-1A-MD-3/8 may have been modified to handle these chemicals.    March Pump's industrial AC-1A-MD-3/8 is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation and chemical transfer. It is capable of generating a maximum flow of 2.3 gallons per minute at 0.25 feet, and its maximum head is 4.6 Feet (or around 2PSI). The standard wet end (the materials that come into contact with the solution) is composed of Polypropylene, Buna N, Nylon, Carbon/Teflon, Stainless Steel, and Ceramic Magnet. The inlet connection is 0.375 inch smooth, and the outlet is 0.375 inch smooth. The standard motor is a 1 Phase 115V or 230V 0.05 Horsepower motor, which can be run on 60 hertz on 115V or 50 and 60 hertz on 230V (there are performance differences between the hertz options).  The maximum internal pressure the pump can tolerate is 50PSI, and the maximum liquid temperature is 190 Fahrenheit or 87 Celsius. The March AC-1A-MD-3/8 centrifugal magnetic drive pump is capable of handling mildly or highly corrosive chemicals, acids, and solvents.     Unit System 60Hz 50Hz Max Flow 2.3 GPM 8.7 LPM Max Head 4.6 FT 1 M Power .005 HP .003 KW Electrical 115V 60HZ      230V 50/60HZ   Type Centrifugal Mag Drive Inlet 3/8"OD Outlet 3/8"OD Wet End Polypropylene (Front and Rear Housing), Buna N (O-Ring), Nylon (Impeller), Carbon/Teflon (Thrust Washer), 316 Stainless Steel (Shaft), Ceramic Magnet     Part # 0115-0064-0300  

Applications for the March AC-1A-MD-3/8 Magnetic Drive Pump include photographic processing equipment, refrigeration systems, and water displays.   The AC-1A-MD-3/8 has pumped Acetone, Ammonium Chloride, Ammonium Chloride, Ammonium Hydroxide, Citric Acid, Ethylene Glycol, Magnesium Nitrate, Potassium Carbonate, Sodium Borate, Fresh Water, Salt Water, and many more chemicals.  The AC-1A-MD-3/8 may have been modified to handle these chemicals.   March Pump's industrial AC-1A-MD-3/8 is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation and chemical transfer. It is capable of generating a maximum flow of 2.3 gallons per minute at 0.25 feet, and its maximum head is 4.6 Feet (or around 2PSI). The standard wet end (the materials that come into contact with the solution) is composed of Polypropylene, Buna N, Nylon, Carbon/Teflon, Stainless Steel, and Ceramic Magnet. The inlet connection is 0.375 inch smooth, and the outlet is 0.375 inch smooth. The standard motor is a 1 Phase 115V or 230V 0.05 Horsepower motor, which can be run on 60 hertz on 115V or 50 and 60 hertz on 230V (there are performance differences between the hertz options).  The maximum internal pressure the pump can tolerate is 50PSI, and the maximum liquid temperature is 190 Fahrenheit or 87 Celsius. The March AC-1A-MD-3/8 centrifugal magnetic drive pump is capable of handling mildly or highly corrosive chemicals, acids, and solvents.      Unit System 60Hz 50Hz Max Flow 2.3 GPM 8.7 LPM Max Head 4.6 FT 1 M Power .005 HP .003 KW Electrical 115V 60HZ          230V 50/60HZ   Type Centrifugal Mag Drive Inlet 3/8"OD Outlet 3/8"OD Wet End Polypropylene (Front and Rear Housing), Buna N (O-Ring), Nylon (Impeller), Carbon/Teflon (Thrust Washer), 316 Stainless Steel (Shaft), Ceramic Magnet

Sierra fuel line assemblies meet or exceed both USCG safety regulations and EPA evaporative emissions requirements. Assemblies consist of engine connector, low-perm primer bulb and tank connectors. Designed to be used in connection with 18-8078 large bore 13mm tank adapter. 2-stroke DT model complete with 13mm tank adapter to replace small (11mm) and large (13mm) bore fuel line assemblies. 4-stroke DF model designed with 13mm quick-disconnect tank connector and a prong engine connector to replace most 15 to 140HP assemblies. Hi visibility display packaging.

Sierra fuel line assemblies meet or exceed both USCG safety regulations and EPA evaporative emissions requirements. Assemblies consist of engine connector, low-perm primer bulb and tank connectors. Designed to be used in connection with 18-8078 large bore 13mm tank adapter. 2-stroke DT model complete with 13mm tank adapter to replace small (11mm) and large (13mm) bore fuel line assemblies. 4-stroke DF model designed with 13mm quick-disconnect tank connector and a prong engine connector to replace most 15 to 140HP assemblies. Hi visibility display packaging.

Sierra fuel water separators remove over 98.8% of emulsified water from gasoline. All filters flow at 90 GPH. Kits include 2 pipe plugs. Display packaged.

Sierra fuel water separators remove over 98.8% of emulsified water from gasoline. Sierra's 10 micron filters are over 90% efficient at removing particles as small as 10 micron. All filters flow at 90 GPH. 10 micron filters are recommended to prevent damage to inboard and outboard fuel injection systems. Kits include two brass pipe plugs. Display packaged.

Complete in-line fuel filter kit with transparent housing to allow visual assessment of fuel flow and filter condition. Contains housing, replaceable element and fittings. Display packaged.

3/8" compression fittings which utilize a 9/16"-24 fine thread. NPT fittings are not to be used in a -3 helm and/or cylinder.