|
|
105.19 |
|
|
|
36.59 |
|
|
Sierra fuel fittings for Yamaha.
|
22.99 |
|
|
1-1/4" #316 Stainless Steel NPS to NPT Flange Adapter
IBVF Flanged Adapters have been developed to address several common problems in the marine industry.
Features:
Eliminate dangerous thread miss-match when in-line valves are screwed onto thru hulls
Accept standard thru-hulls into the base and standard in-line valves on top
Provide a safe and sturdy assembly when in-line valves are used as seacocks
For OEMs, prevent valve damage during engine or generator installation - the valve can be installed later
Simplifies future valve replacement
C83600 Bronze and #316 SS models
|
61.33 |
|
|
22-18 AWG - 1/4" Nylon Ring Terminal - 25-Pack
Ancor's Marine Grade terminals differ from automotive terminals by being designed for the harsh marine environment. Nylon insulators are easy to crimp and will not split. Barrels are designed to tightly grip the wire with the least effort. Tinned copper gives the least electrical resistance but the most corrosion protection.
Features:
Nylon insulated with insulation grip
Double crimp, funnel entry
UL 486C
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
8.24 |
|
|
1-1/4" Fresh Water Strainer w/#304 SS Basket
Features:
Protect fresh water pumps from debris.
White nylon strainer head and clear plastic sight glass. Glass unscrews for filter basket cleaning.
Mount bracket included.
Use WSB for fresh-water systems (#304 SS basket)
|
63.34 |
|
|
March 893-10-1/4" 24V Pump W/ 1286-0002-0100
|
351.00 |
|
|
22-18 Gauge - 1/4" Heat Shrink Ring Terminal - 100-Pack
Wire Range:22-18
Screw Size: 1/4"
Quantity: 100
Product Features:
Cross Linked polyolefin tubing is much stronger than PVC tubing and will not burn like PVC
Heat activated adhesive lining provides impervious seal to salt water, oil, acids, and sunlight as well as providing strain relief
Nylon insulator, preferred by experts, for Marine Grade™ resistance to sunlight, water, oil, chemicals, vibration and cut-through damage
UL Listed and CSA Recognized
Highest shrink ratio - shrinks to 1/3 original size
Shrinks at 257° F/125° C
Operating temperature range 40° C to 110° C
ANCOR heat shrink connectors offer heat activated adhesive built into the sleeve of the heat shrink tubing
Shrinks to form a water tight seal and the ultimate vibration and strain relief
Tinned for corrosion resistance
Pure copper for maximum current flow
Brazed seam for maximum strength
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
31.56 |
|
|
22-18 Gauge - 1/4" Heat Shrink Ring Terminal - 25-Pack
Wire Range:22-18
Screw Size: 1/4"
Quantity: 25
Product Features:
Cross Linked polyolefin tubing is much stronger than PVC tubing and will not burn like PVC
Heat activated adhesive lining provides impervious seal to salt water, oil, acids, and sunlight as well as providing strain relief
Nylon insulator, preferred by experts, for Marine Grade™ resistance to sunlight, water, oil, chemicals, vibration and cut-through damage
UL Listed and CSA Recognized
Highest shrink ratio - shrinks to 1/3 original size
Shrinks at 257° F/125° C
Operating temperature range 40° C to 110° C
ANCOR heat shrink connectors offer heat activated adhesive built into the sleeve of the heat shrink tubing
Shrinks to form a water tight seal and the ultimate vibration and strain relief
Tinned for corrosion resistance
Pure copper for maximum current flow
Brazed seam for maximum strength
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
15.43 |
|
|
22-18 Gauge - 1/4" Heat Shrink Ring Terminal - 3-Pack
Wire Range:22-18
Screw Size: 1/4"
Quantity: 3
Product Features:
Cross Linked polyolefin tubing is much stronger than PVC tubing and will not burn like PVC
Heat activated adhesive lining provides impervious seal to salt water, oil, acids, and sunlight as well as providing strain relief
Nylon insulator, preferred by experts, for Marine Grade™ resistance to sunlight, water, oil, chemicals, vibration and cut-through damage
UL Listed and CSA Recognized
Highest shrink ratio - shrinks to 1/3 original size
Shrinks at 257° F/125° C
Operating temperature range 40° C to 110° C
ANCOR heat shrink connectors offer heat activated adhesive built into the sleeve of the heat shrink tubing
Shrinks to form a water tight seal and the ultimate vibration and strain relief
Tinned for corrosion resistance
Pure copper for maximum current flow
Brazed seam for maximum strength
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
2.59 |
|
|
316 SS Non-Perforated Worm Gear Hose Clamp - 15/32" Band - (7/8" – 1-1/4") Clamping Range - 10-Pack - SAE Size 12
Premium Marine Grade, all AISI 316 (high tensile strength) Stainless Steel “HD NON-PERF” Worm Gear Hose Clamp. The 11.7 mm (0.46”) wide band is Non-Perforated and Smooth on the inside with Rolled Edges. This eliminates hose damage with increased clamping force. The High Strength, Compact, One Piece 16mm (0.63”) wide Housing provides one of the highest clamping force ratings of any worm gear style clamp.
Features:
The screw head is 7mm
Long service life and safety for most general-purpose hose applications and connections
Recommendations:
Measure hose O.D. before selecting clamp size for proper fit
Double clamp on each hose end for critical applications
Consider using our #720 Series wide band 316 SS T-Bolt Clamps for larger I.D. hoses (i.e. Exhaust Hose, etc.)
Construction:
Band & Housing: 316 Stainless Steel 11.7 mm wide band – 0.9mm thick
Screw Drive: 316 Stainless Steel 7.0 mm screw head
Specifications:
SAE Size: 12
Hose Inner Diameter: (inch) 5/8" – 1-1/8"
Clamping Range: (inch) 7/8" – 1-1/4" / (mm) 22-32
Recommended Torque Inch lbs: 35-45
|
23.83 |
|
|
Burks T37G5-1 1/4-SS-3.25, Centrifugal Pump
80gpm, 1-1/4" Outlet 3/4HP 3PH
|
5122.39 |
|
|
RAM 1/4"-20 x 2 1/4" Threaded Stud with 1" Ball
The RAM-B-273U consists of a 1/4-20 threaded stainless steel bolt with 1 inch diameter ball. The threaded bolt is 2.5 inches long.
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
8.65 |
|
|
Bosworth 75-1 1/4 Foot/Check Vlv 1 1/4 Female
Bosworth- Foot Valve / Check Valve Sea-Lect Gray Delrin, Buna Flapper Valve, 1 1/4” Female Threaded Ports
|
20.36 |
|
|
BURKS GNA6-1 1/4-5.00, CENTRIFGUAL PUMP ONLY BRONZE-FIT
Bronze Fitted Cast Iron Construction.
Base mounted Pump Only less Motor.
Ports are Inches NPT Inlet, Inches NPT Outlet.
UNSPSC Code: 40150000
|
1987.20 |
|