|
100 psi oil pressure sender for single station instruments.
|
51.69 |
|
|
1/8"-27 Thread, 10-32 Stud Terminal, 0-80 PSI, Single Station. Replaces Mercruiser 815425T and 90806, OMC 982650, Volvo 3857532, Crusader 700425, Pleasurecraft RO20001.
|
42.99 |
|
|
Oil Pressure Sender - Single Sender
Perfect replacement or upgrade to your boat.
Features:
Single Sender
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
51.64 |
|
|
Oil Pressure Sender 1/8 NPTF European 5 Bar Single Float
The Faria Beede single station insulated earth oil pressure sender is European resistance and suitable for use with the European range of Faria Beede oil pressure gauges.
The Faria Beede oil pressure sender is threaded 1/8" NPTF and works with both 12V and 24V DC electrical systems, for alternative threaded systems please order an appropriate threaded sender adaptor.
Single station oil pressure sender is suitable for operating one oil pressure gauge, for dual gauge operations order a dual station oil pressure sender. The Faria Beede insulated earth oil pressure sensor is earthed back to the battery (where earth means ground (G) and is negative).
This Faria Beede pressure sender measures up to 5 bar.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
52.18 |
|
|
Oil Pressure Sender 1/8" NPTF American 100 PSI - Single Standard
Features:
1/8" NPTF
A wide variety of sender types
Metric and Standard values available
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
40.13 |
|
|
Oil Pressure Sender - Single Station
Specifications:
1/8" NPTF
0-80 PSI
Single Station
Standard Ground
Factory P/N SD0003
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
36.59 |
|
|
Oil Pressure Sender 1/8 NPTF America 80 PSI Dual Station Standard
Engine oil pressure sending unit sends a reading from 0-80 PSI to the oil pressure gauge.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
45.84 |
|
|
Oil Pressure Sender (1/8 NPTF European 10 Bar) - Single Standard
Perfect replacement or upgrade to your boat.
Features:
Single Standard
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
112.07 |
|
|
Cockpit Marine Oil Pressure Gauge - 80 PSI - Black Dial/Bezel
VDO Cockpit Marine offers a comprehensive modular, modern series of instruments for engine monitoring. More functions and greater flexibility in installation and design increase the scope for high manufacturing standards and guarantee the highest level of reliability and readability.
As the result of ongoing research and development work, VDO Cockpit Marine gauges offer an innovative, comprehensive standard instrumentation platform. VDO Cockpit Marine gauges provides maximum freedom to customize the cockpit and is the natural choice for an attractive price/performance ratio.
Features:
0-80PSI Range
Works with 240-33 Ohm Oil Pressure Senders
12V Illumination bulb
Connection: M4 Stud
Mounting Hardware: Included
Input Type: Analog
Voltage: 12V
Dial Scale: Single
*Sold as an Individual
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
19.43 |
|
|
Oil filters and oil pressure senders.
|
11.99 |
|
|
Cockpit Marine 52MM (2-1/16") Oil Pressure Gauge - White Dial/Chrome Bezel
VDO Cockpit Marine offers a comprehensive modular, modern series of instruments for engine monitoring. More functions and greater flexibility in installation and design increase the scope for high manufacturing standards and guarantee the highest level of reliability and readability.
As the result of ongoing research and development work, VDO Cockpit Marine gauges offer an innovative, comprehensive standard instrumentation platform. VDO Cockpit Marine gauges provides maximum freedom to customize the cockpit and is the natural choice for an attractive price and performance ratio.
Features:
Works with all 240-33 Ohm Common Marine Oil Pressure Senders
Uses Common Ring Terminal Wire Connections
0 to 80 PSI Range
For 12V Electrical Systems
Mounting Hardware Included
12V Illumination Bulb
*Sold as an Individual
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
19.43 |
|
|
SingleViu 52mm (2-1/16") Oil Pressure Gauge - 80 PSI - 240-33 Ohm
SingleViu instruments represent the latest technology in instruments, and offer a top of the line solution by being able to work directly with traditional analog senders or work directly off a J1939 CAN network. Each SingleViu gauge has it's own microprocessor, which allows it to have a dual-input capability that can be switched from it's default analog input to J1939 CAN via the SingleViu Configuration software . Each speedometer or tachometer can also the display the J1939 system fault codes.
These features, along with waterproof and fog proof construction, RGB LED illumination and advanced stepper motors make SingleViu the ideal solution when traditional gauges are needed or desired.
*240-33 Ohm Sender Required
Features:
240-33 Ω Default Input
RGB LED Illumination (default illumination set to White)
Water Resistant Front & Rear
Includes Wire Harness
Voltage 12-24V
Molex MX 150 8 Pin Connector
Spin-Lok™ Mounting Hardware
Analog Input
∗Sold as an Individual
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
98.06 |
|
|
Pressure Sender 80 PSI 1/4-18 NPT
Features:
Ground - Standard
Connection - Knurled Nut
Voltage - 6-24V
Thread - 1/8-27 NPTF
Max. Pressure Range - 80 PSI / 5 bar (10-180Ohm)
*Sold as an Individual
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
43.38 |
|
|
VDO SingleViu 52mm (2-1/16") Oil Pressure Gauge - 80 PSI - 0-180 Ohm
SingleViu instruments represent the latest technology in instruments, and offer a top of the line solution by being able to work directly with traditional analog senders or work directly off a J1939 CAN network. Each SingleViu gauge has it's own microprocessor, which allows it to have a dual-input capability that can be switched from it's default analog input to J1939 CAN via the SingleViu Configuration software . Each speedometer or tachometer can also the display the J1939 system fault codes.
These features, along with waterproof and fog proof construction, RGB LED illumination and advanced stepper motors make SingleViu the ideal solution when traditional gauges are needed or desired.
*0-180 Ohm sender required.
Features:
10-1804 Ω Default Input
RGB LED Illumination (default illumination set to White)
Water Resistant Front & Rear
Includes Wire Harness
Molex MX 150 8 Pin Connector
Voltage 12-24V
Spin-Lok™ Mounting Hardware
Analog Input
∗Sold as an Individual
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
98.06 |
|
|
SingleViu 52mm (2-1/16") Oil Pressure Gauge - 400 PSI - 0-180 Ohm
SingleViu instruments represent the latest technology in instruments, and offer a top of the line solution by being able to work directly with traditional analog senders or work directly off a J1939 CAN network. Each SingleViu gauge has it's own microprocessor, which allows it to have a dual-input capability that can be switched from it's default analog input to J1939 CAN via the SingleViu Configuration software . Each speedometer or tachometer can also the display the J1939 system fault codes.
These features, along with waterproof and fog proof construction, RGB LED illumination and advanced stepper motors make SingleViu the ideal solution when traditional gauges are needed or desired.
*0 - 180 Ohm Sender Required
Features:
0-180Ω Default Input
RGB LED Illumination (default illumination set to White)
Water Resistant Front & Rear
Includes Wire Harness
Molex MX 150 8 Pin Connector
Voltage 12-24V
Spin-Lok™ Mounting Hardware
Analog Input
∗Sold as an Individual
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
97.92 |
|