Water temperature sending unit, 3/8" - 18 NPT threads. Replaces: Mercruiser 97257A1, 806490T, Mercruiser Vazer 980613, Volvo 3853787.

Temperature Sender - 1/8 " NPT Thread 1/8"  NPT Dual Station temperature sender. Specifications:  Dual station 1/8 inch NPT thread size 10-32 stud terminal Works with US ohm scale temperature gauges Standard ground Factory P/N TS1056 *Sold as an Individual This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Temperature Sender 1/8" NPTF Cylinder Head Temp Features: Temperature Sender 1/8" NPTF NPTF Cylinder Head This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Temp Sender 3/8" NPTF America Single Standard Features: 3/8 NPT  100/250 oF - 460/29.5 ohms Single wire This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Marine Grade Electrical Wire Seal - Round Cable, 18 to 10 AWG, 3/8" NPT Made of Nylon 6/6 flame resistant, self extinguishing Buna-N form seal. All seals exceed NMEA 4 x or 6 specs. Overlapping clamping spines allow for superior pull-out protection and resistance. Strain relief fittings are resistant to salt water and acid. Features: Round Cable 18 to 10-Gauge/AWG 3/8" NPT WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Temperature Sender - 1/4" NPT Thread 1/4"  NPT Single station temperature sender. Specifications:  Single station 1/4 inch NPT thread size 10-32 stud terminal Works with US ohm scale temperature gauges Standard ground Factory P/N TS2035 *Sold as an Individual This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Oil Pressure Sender 1/8 NPTF European 5 Bar Single Float The Faria Beede single station insulated earth oil pressure sender is European resistance and suitable for use with the European range of Faria Beede oil pressure gauges. The Faria Beede oil pressure sender is threaded 1/8" NPTF and works with both 12V and 24V DC electrical systems, for alternative threaded systems please order an appropriate threaded sender adaptor. Single station oil pressure sender is suitable for operating one oil pressure gauge, for dual gauge operations order a dual station oil pressure sender. The Faria Beede insulated earth oil pressure sensor is earthed back to the battery (where earth means ground (G) and is negative). This Faria Beede pressure sender measures up to 5 bar. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Oil Pressure Sender 1/8 NPTF America 80 PSI Dual Station Standard Engine oil pressure sending unit sends a reading from 0-80 PSI to the oil pressure gauge. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Temperature Sender - 1/8" (American Single Standard) Features: 1/8” NPTF American Single Standard Catalog P/N 90401 ∗Sold as a Single This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Oil Pressure Sender 1/8" NPTF American 100 PSI - Single Standard Features: 1/8" NPTF A wide variety of sender types Metric and Standard values available This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Oil Pressure Sender (1/8 NPTF European 10 Bar) - Single Standard Perfect replacement or upgrade to your boat. Features: Single Standard This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

3/8" NPT Bronze Inline Fuel Valve Features: Selectable handle rotation Full flow Mount foot included C83600 bronze construction Stainless steel handle and hardware 400 WOG PTFE seats and seals UL listed for fuel or water

3/8" NPT Bronze In-Line Ball Valve Features: Female NPT Threads 1-1/4" sizes and larger include a grease zerk fitting for lubrication (use only with the valve in the open position) or for draining Selectable handle rotation Handle has square hole to accept standard ratchet to help reach valves in hard-to-reach locations and ease actuation of difficult to operate valves 400 WOG rated Full flow C83600 bronze construction Stainless steel handle and hardware Chrome plated solid brass ball (not a hollow ball) PTFE seats and seals Bonding attachment UL listed for fuel or water Fits IBVF for Seacock Application

Aluminum Fuel Hose Fitting - 3/8" NPT x 3/8" Barb - (Anti-Siphon Valve) This Attwood Fuel Tank Fitting is a dependable replacement for original equipment and provides a sure connection in a fuel line. This is a male thread, anti-siphon valve with 3/8-In. NPT x 3/8-In. barb.  Features: Fitting is suitable for use with leaded, unleaded, ethanol-blended, and alcohol-blended fuels Anti-Siphon Valve Material Construction: Aluminum Male thread, hose barb (inch) Male 3/8" NPT x 3/8" Barb  *Use thread sealant on all threads

Universal Aluminum Fuel Hose Fitting - 3/8" NPT x 3/8" Barb This Attwood Fuel Tank Fitting is a dependable replacement for original equipment and provides a sure connection in a fuel line. Features: Fitting is suitable for use with leaded, unleaded, ethanol-blended, and alcohol-blended fuels Specifications: Material Construction: Aluminum Male thread, hose barb (inch) Male 3/8" NPT x 3/8" Barb  *Use thread sealant on all threads