Gianneschi PM40 24V 1" BARBS Diaphragm Pump 24V 40Lpm 1"

Gianneschi PM40 12V 1"BARBS Diaphragm Pump 12V 40Lpm 1"

Gianneschi 02CBCA80E ACB80 Wet End Only Port Size: From 1/2'' to 1'' BSP Pump casing: Bronze Impeller / Gear: Bronze Shaft: Stainless steel

Gianneschi ACB331-230V Bronze 230V 1Ph 50/60Hz Main pump features:  Outstanding self-priming Side channel and liquid ring construction Simple and compact   Applications:  Ballast Bilge Diesel oil F.W./S.W. Washing Fire-fighting S.W feeding WPS - Hydrofore   Port Size: From 1'' 1/4 to 1'' 1/2 BSP Pump casing: Bronze Impeller / Gear: Bronze Shaft: Stainless steel

Gianneschi PM40 REPAIR KIT PM40 Repair Kit

Gianneschi 160CC-24V Blower

Gianneschi CS2-24V Air Compressor withTank

Gianneschi CP20-24V Bronze 24V Self-Priming Pump Gianneschi CP20-24V, CP Series Self Priming Liquid Ring Pump and Motor unit, Bronze construction, Bronze impeller, 316 Stainless Steel Shaft. Motor is 0.18KW (0.25 Horsepower), 2800 RPM, 24 Volts DC. Inlet Port is 3/4 Inch, Discharge Port is 3/4 Inch.   Pump Body: Bronze Impeller: Bronze Shaft: 316 Stainless Steel Port Size: Inlet Port is 3/4 Inch, Discharge Port is 3/4 Inch Motor Specs : 0.18KW (0.25 Horsepower), 2800 RPM, 24 Volts DC

Gianneschi C6000-2Z Bearing for Pump

Gianneschi SR874M-P Brush For Pump Motor

Gianneschi CG25/12 AE/R Pump 230/400/50

Gianneschi IDROMINI-ACB61E-12V Bronze Pump 12V Water Pressure System Main Water Pressure System features: High quality, bronze self-priming centrifugal pump with star impeller Includes pressure switch, membrane tank, pressure gauge and no-return valve Painted steel with s/steel flange Tank capacity from 2 to 5 litres

Gianneschi JET622B El/Pump 220/380 50Hz

Flojet 04300-505-24V Pump 24V 4.9/45 Pse Sw This Flojet 04300-505-24v Diaphragm Pump runs on 24 Volts DC and has 5/8” Hose Barb Snap-In Ports.  Open flow produces 4.9 gallons per minute with a 45psi switch.  Made of Polypropylene, EPDM Valves and Santoprene Diaphragm.

Gianneschi CP20-12V Bronze 12V Self-Priming Pump Gianneschi CP-20-12V, CP Series Self Priming Liquid Ring Pump and Motor unit, Bronze construction, Bronze impeller, 316 Stainless Steel Shaft. Motor is 0.2KW (0.25 Horsepower), 2600 RPM, 12 Volts DC. Inlet Port is 3/4 Inch, Discharge Port is 3/4 Inch.   Applications for the CP2012V include liquid intake, grey water discharges, bilges, showers, diesel and oil, galleys, as well as in pumping seawater and fresh water. This pump is not suitable for viscous liquids or pumping abrasive liquids. Install the pump in a dry and well ventilated location.   The pump must be placed on a solid surface in the horizontal position, feet down. To reduce vibration block the machine with the bolts to the surface and install some vibration dumpers. These pump usually do not need any maintenance so long as the following precautions are taken. If there is a risk of freezing, it is necessary to empty the pump casing then fill the pump up before running it again. Make sure the pump never runs dry.