Gianneschi PM40 12V 1"BARBS Diaphragm Pump 12V 40Lpm 1"

Gianneschi PM40 24V 1" BARBS Diaphragm Pump 24V 40Lpm 1"

Johnson 10-35157-1 Engine Cooling Pump FEATURES Pump Body: Bronze Ports: Threaded or Hose Cam: Full or 1/2 Impeller: Neoprene Shaft Seal: 2 Lip Seals Drive: Flange Mounted to Engine.     APPLICATIONS / CHARACTERISTICS Flexible Impeller Engine Cooling Pump. Requires (2) Johnson 01-43238 Clamps to Mount.   Johnson- Engine Cooling Pump Slip-Fit Ports Full Cam F35B-9, Volvo 858065    

Gianneschi PM40 REPAIR KIT PM40 Repair Kit

Gianneschi 15CE0 Control-Press 12V 1" 1.5Bar

Gianneschi ACB61E-12V Bronze 12V Self-Prime Pump

Gianneschi SGM45 Brush GM4 7X14 (Cp25/1)

Gianneschi 21ALT020N Accumulator Tank 2 Liter 1/2" Generic Image of Accumulator Tank

Gianneschi 03BZ0002 Anode 1/2" Gas  Water Heater Anode 1/2" 03BZ0002

Gianneschi 03BZ0001 Anode 1-1/4

Gianneschi 15CET2 Control-Press CE 230V 1"

Gianneschi KZECOI1CE01 Repair Kit For Ecoinox 1 Ce

Gianneschi ACB80E-12V Bronze 12V Self-Prime Pump Gianneschi ACB80E-12V, ACB Series Self Priming Liquid Ring Pump and Motor unit, Bronze construction, Brass impeller, 316 Stainless Steel Shaft. Motor is 0.45KW (0.6 Horsepower), 2600 RPM, 12 Volts DC. Inlet Port is 3/4 Inch, Discharge Port is 3/4 Inch.   Applications for the ACB80E12V include chain washing, fire fighting, pumping seawater and liquids with a high gas content, diesel and oil pumping, bilges, and any water supplying applications.

Gianneschi CP20-12V Bronze 12V Self-Priming Pump Gianneschi CP-20-12V, CP Series Self Priming Liquid Ring Pump and Motor unit, Bronze construction, Bronze impeller, 316 Stainless Steel Shaft. Motor is 0.2KW (0.25 Horsepower), 2600 RPM, 12 Volts DC. Inlet Port is 3/4 Inch, Discharge Port is 3/4 Inch.   Applications for the CP2012V include liquid intake, grey water discharges, bilges, showers, diesel and oil, galleys, as well as in pumping seawater and fresh water. This pump is not suitable for viscous liquids or pumping abrasive liquids. Install the pump in a dry and well ventilated location.   The pump must be placed on a solid surface in the horizontal position, feet down. To reduce vibration block the machine with the bolts to the surface and install some vibration dumpers. These pump usually do not need any maintenance so long as the following precautions are taken. If there is a risk of freezing, it is necessary to empty the pump casing then fill the pump up before running it again. Make sure the pump never runs dry.

Gianneschi 02CBCA80E ACB80 Wet End Only Port Size: From 1/2'' to 1'' BSP Pump casing: Bronze Impeller / Gear: Bronze Shaft: Stainless steel