|
F35B-8007 Impeller Pump - Pedestal Style
Flexible impeller pumps, F-series, provide an efficient solution to most raw water pumping needs. The primary advantage of a flexible impeller pump is its self-priming ability. As the vanes of the impeller are depressed and rebound, they create their own vacuum drawing fluid into the pump. A dry pump can lift the water up to as much as 3 meters. Thus a flexible impeller pump being used for engine cooling needs not to be located below the water line or manually primed. An added feature of flexible impeller pumps is that they can pass fairly large solids without clogging or damaging the pump. This reduces the need for filtering the incoming fluid. For general raw or freshwater applications, the standard long-lasting neoprene rubber impeller is used. Both the impeller and the seals depend upon the water for lubrication and will soon burn out if run dry.
Features:
A general feature of all flexible impeller pumps is that they cannot be permitted to run dry for more than 30 seconds
Wearing parts are easily replaceable for all standard models
Applications:
Engine cooling – raw water handling
Freshwater handling
Specifications:
Port size: (inch) 3/8" NPTF
Mount Type: Pedestal
CAM: Full 1/1
Lip seal
Material (Pump Body): Bronze
Material (Shaft): Stainless steel
Cooling Capacity:
The required output of the cooling pump – raw water as well as fresh water handling – is related to:
Engine type: (gasoline or diesel)
Type of cooling system (size of heat exchanger)
Water cooled engine oil, reverse gear, exhaust system
*Sold as an Individual
|
237.00 |
|
|
|
401.79 |
|
|
|
327.90 |
|
|
Shurflo 8007-543-850 Pump 12V 45Bp Pvs
Diaphragm Pump with 12 Volt DC Motor and 45 PSI Bypass. Polypropylene Pump Body, Viton Valves, Santoprene Diaphragm. Inlet Port is 3/8 Inch-18 NPT Female, Discharge Port is 3/8 Inch-18 NPT Female. 1.8 GPM open flow.
Features :
Pump Body:Polypropylene
Impeller:Viton Shaft:Santoprene
Port Size:Inlet Port is 3/8 Inch-18 NPT Female, Discharge Port is 3/8 Inch-18 NPT Female.
Motor Specs :12 Volt DC, Permanent Magnet, P/N 11-184-04, Fuse Protected, On/Off Switch, Connector.
|
166.09 |
|
|
Talulah High Flow Ballast Pump - 30 GPM - 12V
With an extraordinary 30GPM rating, the Johnson Pump Talulah HighFlow Ballast Pump represents the industry gold standard of high speed, reliable and efficient reversible ballast pumps. Built with ball bearings, a solid bronze pump head, and built-in thermal protection, this ballast pump is exceptionally durable and built to last. The compact size allows for flexibility in system design without using valuable storage space and without sacrificing the versatile high volume connections unique to the design of the pump head. The Talulah HF also offers run dry protection, the integrated Run-Dry Protection circuit monitors the current draw of the pump and automatically shuts it off if conditions indicate water is no longer flowing through the pump. This innovative feature can help minimize any damage to the new neoprene orange impeller, which itself delivers faster fill/drain times and is more reliable than the previous models. In addition, the ignition protected design makes this pump suitable for installation in the bilge compartment of the boat without risk of fire or explosion due to fuel vapors. Whether for use in a new automated ballast system installation or to upgrade the pumps in an existing system for faster fill and drain times, the Talulah HF 30GPM Ballast Pump delivers the next generation of pump performance in the wakeboarding world.
Features:
Built in Thermal Overheat Protection: Automatic reset after cooling down
Monitor Filling: Tanks must have overfill protection
Retrofit Possible: Important to have full bore hoses – without restriction
Dry Run Impeller*
Intermittent Duty
Important to have good electric installation and proper wire size (Acc. to ISO 10133)
Recommend fresh batteries and engine running (alternator running) to ensure power supply
*Dry Run
|
308.15 |
|
|
Standard Electric Compact Macerator Style - 12V
The Johnson Pump Aqua Marine Toilet has been designed to meet virtually every conceivable lavatory installation situation onboard.
Priced competitively, the fine finish and well thought-through design of these toilets is remarkable. Made from white vitreous porcelain, and with corrosion resistant parts throughout, the Johnson Pump AquaT marine toilet, is quiet, robust and easy to clean.
Using the Johnson Pump Aqua Marine Toilet, water inlet and outlet takes place in two distinct steps. First the bowl is filled with clear water, and then the waste is flushed, leaving the bowl empty and clean, with no liquids sloshing about. Naturally, automatic back-flow prevention is incorporated into the design.
Most models can be ordered with standard, bevelled or low profiles in order to fit almost any hull and bulkhead configuration, and all are available in either compact or comfort versions so you can outfit your marine lavatory with the perfect-sized toilet, no matter what the layout.
The Aqua Toilet will give you years of trouble free operation. When spare parts such as a new seat or valve are needed, you'll find Johnson Pump's global network of distributors at your service.Power models are shipped with well-proven Aqua Jet diaphragm pumps.
It's probably fair to think of most toilets as commonplace products, but look at the features and you're sure to see that the Aqua is far from ordinary. Quiet, hygienic and reliable, the Johnson Pump AquaT marine toilet is perfect for almost any marine toilet room.
CE-approved
Features
Whisper quiet operation
Self-priming pump
One push button on control panel
Clean lines - pleasing to the eye
Hygienic, easy-to-clean vitreous china bowl and exterior surfaces
Robust wooden seat with durable baked enamel finish
Low water consumption (2-2.5 l/flush) makes the most of holding tank capacity
Versatile plumbing connection options
Automatic back-flow prevention
Available in comfort or compact bowl sizes
Designed for virtually any onboard mounting position
May be installed above or below the waterline
Suitable for OEM or replacement installation
Corrosion resistant materials throughout
Long service life
Equipped with 12V Aqua Jet pumps
Quick-connect hose or threaded connectors
Complies with ISO 8846, ignition protection, and EN 55014 EMC
|
303.71 |
|
|
Talulah Ballast Pump Impeller Kit
A worn or damaged impeller can cause system failure or engine breakdown. SPX's Johnson Pump brand impellers are developed and manufactured for maximum flow and long life. With a genuine spare impeller you can also be sure that you are getting the quality required by engine manufacturers and professionals.
|
32.59 |
|
|
Jabsco 52200-2011 Flexible Impeller Pedestal Pump
FEATURES
Pump Body:
Bronze, Pedestal Mount
Port Size:
1 1/2 " BSP
Flow:
Nominal 200 Litres/min (44.5 gallons/min) at 1500rpm
Impeller:
Neoprene or Nitrile
Shaft Seal:
Carbon-Ceramic Face Type
Shaft:
Stainless Steel
APPLICATIONS
General Purpose, Circulating, Pumping Bilges, Transfers, Washdowns, Sump Drainage, Spill Returns.
Constructed from marine quality bronze and stainless steel for ruggedness and reliability. Easy to service and maintain. Inexpensive to buy and operate. Will tolerate abrasive wear. Handles hard and soft solids without clogging. Can pump in either direction. Will not airlock. Self-priming from dry up to 2.4m (7.8ft).
Jabsco- Flexible Impeller Pedestal Pump 1 1/2" British Standard Pipe Threads, Neoprene Impeller
44.5GPM, 1 1/2"BSP Threaded Ports
|
978.20 |
|
|
AquaT Marine Electric Toilet
Available in a wide variety of different versions marketed under three basic models - standard and premium electric-powered or manual - the Johnson Pump AquaT marine toilet has been designed to meet virtually every conceivable lavatory installation situation onboard.
Priced competitively, the fine finish and well thought-through design of these toilets is remarkable. Made from white vitreous porcelain, and with corrosion resistant parts throughout, the Johnson Pump AquaT marine toilet, is quiet, robust and easy to clean.
Using the Johnson Pump AquaT marine toilet, water inlet and outlet takes place in two distinct steps. First the bowl is filled with clear water, and then the waste is flushed, leaving the bowl empty and clean, with no liquids sloshing about. Naturally, automatic back-flow prevention is incorporated into the design.
Most models can be ordered with standard, bevelled or low profiles in order to fit almost any hull and bulkhead configuration, and all are available in either compact or comfort versions so you can outfit your marine lavatory with the perfect-sized toilet, no matter what the layout.
The AquaT toilet will give you years of trouble free operation. When spare parts such as a new seat or valve are needed, you'll find Johnson Pump's global network of distributors at your service.Power models are shipped with well-proven Aqua Jet diaphragm pumps.
It's probably fair to think of most toilets as commonplace products, but look at the features and you're sure to see that the AquaT is far from ordinary. Quiet, hygienic and reliable, the Johnson Pump AquaT marine toilet is perfect for almost any marine toilet room.
CE-approved
Features
Whisper quiet operation
Self-priming pump
One push button on control panel
Clean lines - pleasing to the eye
Hygienic, easy-to-clean vitreous china bowl and exterior surfaces
Robust wooden seat with durable baked enamel finish
Low water consumption (2-2.5 l/flush) makes the most of holding tank capacity
Versatile plumbing connection options
Automatic back-flow prevention
Available in comfort or compact bowl sizes
Designed for virtually any onboard mounting position
May be installed above or below the waterline
Suitable for OEM or replacement installation
Corrosion resistant materials throughout
Long service life
Equipped with 12V Aqua Jet pumps
Quick-connect hose or threaded connectors
Complies with ISO 8846, ignition protection, and EN 55014 EMC
|
337.78 |
|
|
F7B-9 Impeller Pump OEM - Flange Style Mount
Flexible impeller pumps, F-series, provide an efficient solution to most raw water pumping needs. The primary advantage of a flexible impeller pump is its self-priming ability. As the vanes of the impeller are depressed and rebound, they create their own vacuum drawing fluid into the pump. A dry pump can lift the water up to as much as 3 meters. Thus a flexible impeller pump being used for engine cooling needs not to be located below the water line or manually primed. An added feature of flexible impeller pumps is that they can pass fairly large solids without clogging or damaging the pump. This reduces the need for filtering the incoming fluid. For general raw or freshwater applications, the standard long-lasting neoprene rubber impeller is used. Both the impeller and the seals depend upon the water for lubrication and will soon burn out if run dry.
Features:
John Deere flange mount for most flange mount for engines such as Deere S350, PowerTech 4.5L, 4045DFM70/TFM75, Powertech 6.8L, 6068TFM75/TFM76
A general feature of all flexible impeller pumps is that they cannot be permitted to run dry for more than 30 seconds
Wearing parts are easily replaceable for all standard models
Applications:
Engine cooling – raw water handling
Freshwater handling
Specifications:
Port size: (inch) 1 1/4" Hose
Mount Type: SAE A Flange
CAM: Full 1/1
Lip seal
Material: Bronze
Cooling Capacity:
The required output of the cooling pump – raw water as well as fresh water handling – is related to:
Engine type: (gasoline or diesel)
Type of cooling system (size of heat exchanger)
Water cooled engine oil, reverse gear, exhaust system
*Sold as an Individual
|
465.00 |
|
|
F5B-9 Impeller Pump OEM - Flange Mount
Flexible impeller pumps, F-series, provide an efficient solution to most raw water pumping needs. The primary advantage of a flexible impeller pump is its self-priming ability. As the vanes of the impeller are depressed and rebound, they create their own vacuum drawing fluid into the pump. A dry pump can lift the water up to as much as 3 meters. Thus a flexible impeller pump being used for engine cooling needs not to be located below the water line or manually primed. An added feature of flexible impeller pumps is that they can pass fairly large solids without clogging or damaging the pump. This reduces the need for filtering the incoming fluid. For general raw or freshwater applications, the standard long-lasting neoprene rubber impeller is used. Both the impeller and the seals depend upon the water for lubrication and will soon burn out if run dry.
Features:
Crankshaft style cooling pump featured on older style small block GM marine engines such as: American Diesel & Bomac Marine
Easy to access impeller design
A general feature of all flexible impeller pumps is that they cannot be permitted to run dry for more than 30 seconds
Wearing parts are easily replaceable for all standard models
Applications:
Engine cooling – raw water handling
Freshwater handling
Specifications:
Port size: (inch) 3/4" NPT
Mount Type: Flange
CAM: Full 1/1
shaft: Mechanical
Material: Bronze
Cooling Capacity:
The required output of the cooling pump – raw water as well as fresh water handling – is related to:
Engine type: (gasoline or diesel)
Type of cooling system (size of heat exchanger)
Water cooled engine oil, reverse gear, exhaust system
*Sold as an Individual
|
438.00 |
|
|
Talulah Ballast Pump - 13.5 GPM - 12V
Features:
Built in Thermal Overheat Protection: Automatic reset after cooling down
Monitor Filling: Tanks must have overfill protection
Retrofit Possible: Important to have full bore hoses – without restriction
Dry Run Impeller*
Intermittent Duty
Important to have good electric installation and proper wire size (Acc. to ISO 10133)
Recommend fresh batteries and engine running (alternator running) to ensure power supply
*Dry Run
|
237.04 |
|
|
F7B-9 Impeller Pump OEM - SAE A Flange Mount
Flexible impeller pumps, F-series, provide an efficient solution to most raw water pumping needs. The primary advantage of a flexible impeller pump is its self-priming ability. As the vanes of the impeller are depressed and rebound, they create their own vacuum drawing fluid into the pump. A dry pump can lift the water up to as much as 3 meters. Thus a flexible impeller pump being used for engine cooling needs not to be located below the water line or manually primed. An added feature of flexible impeller pumps is that they can pass fairly large solids without clogging or damaging the pump. This reduces the need for filtering the incoming fluid. For general raw or freshwater applications, the standard long-lasting neoprene rubber impeller is used. Both the impeller and the seals depend upon the water for lubrication and will soon burn out if run dry.
Features:
John Deere, Kohler Flange mount PTO drive style cooling pump for John Deere engines such as: 4039D and 4045T
A general feature of all flexible impeller pumps is that they cannot be permitted to run dry for more than 30 seconds
Wearing parts are easily replaceable for all standard models
Applications:
Engine cooling – raw water handling
Freshwater handling
Specifications:
Port size: (inch) 1 1/4” Hose
Mount Type: SAE A Flange
CAM: Full 1/1
Shaft: Lip seal
Material: Bronze
Cooling Capacity:
The required output of the cooling pump – raw water as well as fresh water handling – is related to:
Engine type: (gasoline or diesel)
Type of cooling system (size of heat exchanger)
Water cooled engine oil, reverse gear, exhaust system
*Sold as an Individual
|
531.00 |
|
|
Puller for Impeller 1028BT
The Johnson Pump 09-47165-01 Impeller Puller is constructed for easy removal of 09-1028BT impellers from the F7 impeller pump. Impellers should be changed yearly to ensure the engine cooling system remains effective.
Features:
Makes removing 09-1028BT impellers easy
Impellers should be changed yearly
|
16.30 |
|
|
Aqua Void Automatic 500 GPH Bilge Pump - 12V
With its industry-first quick-change motor connection and new reinforced click-in basket, this bilge pump simplifies cleaning and installation, and it's convenient and efficient. Its enhanced motor ensures reliability and performance in any condition. Experience worry-free boating with Aqua Void.
Experience the Industry-First Quick-Change Motor Connection
Johnson Pump's groundbreaking product features a quick-change motor connection for hassle-free cartridge motor changes or capacity upgrades.
Take Control of the Boating Experience with Unparalleled Convenience
The Aqua Void Cartridge Bilge Pump is designed with single-handed access, perfect for tight bilge spaces. The pump body is easy to install or remove, and an innovative reinforced click-in basket simplifies installation, cleaning, or inspection.
Enjoy Enhanced Efficiency and Higher Flow Rate
Powered by an enhanced motor and high-flow impeller, the Aqua Void achieves increased efficiency and a higher flow rate while conserving energy consumption.
Trust in Reliable Performance Under Demanding Conditions
Johnson Pump Marine is renowned for its industry-leading reliability. The Aqua Void lives up to this reputation with its robust construction and meticulous engineering.
Enjoy a worry-free time on the water and experience Reliability On Board. The Aqua Void Bilge Pump is a game-changing solution that sets a new standard in bilge pumps. Don't miss this opportunity to enhance the boating experience. Get the Aqua Void today!
Features:
High-flow impeller design
Quick-change motor connection
Switchless automatic bilge pump with low-amp resistance monitoring
Durable thermoplastic housing design commonality with removable motor cartridge
Smaller profile than pumps with switches
Straight or 90-degree dura port discharge ports with an included check valve
Water-cooled motor, 316 stainless steel shaft, and permanently lubricated double bearings
Clip-in basket
Benefits:
Heightened efficiency and an increased flow rate
Enjoy quick and hassle-free cartridge motor changes or capacity upgrades
Automatically monitors the presence of water through low-amp draw impeller spin
The common body allows interchangeable motor cartridge replacement to the same or different size
For tighter fit in smaller spaces
Allow multi-directional hose routing, eliminate stress cracking without disengaging hoses or removing pumps, and reduce cycling from water backflow
Corrosion-resistant and extended life
Competitive Advantages:
The most efficient and highest flow in the GPH capacity category
Industry-first and only cartridge motor pump with an included harness connection requiring no cutting and splicing of wires
100 days of service before critical battery draw down*
Automatically monitors the presence of water through low-amp draw impeller spin
Ease of installation & maintenance
Specifications:
Pump Size: 500 GPH
Capacity Straight (12V): 600 GPH (38 I/min)
Voltage: 12V
Amp: 2.7A
Fuse: 3.5A
Hose Connection: 3/4 in.
Wire Size: 16 GA, TINNED
Weight: 11.2 oz (0.32 kg)
Body: ABS
Dura Port: PA66/GF - Nylon
Shaft: 316 Stainless Steel
Shaft Seal: Nitrile Rubber
Motor Cartridge: PC-ABS
Pump Dimensions (W x H x L): 2.75 x 4.69 x 5.24 inches (70 x 119 x 133 mm)
|
79.37 |
|