|
140TT 2.2kw Gen. 2 Bow Thruster - 12V
Maneuvering around the dock area can be difficult, but Lewmar’s TT Thrusters make docking simple.
The revolutionary design of the TT propeller, the latest in Lewmar’s long history of custom thruster solutions, achieves a perfectly even thrust in both directions for maximum control and maneuverability.
All Lewmar Thrusters have been extensively tested, resulting in a smooth, efficient, and quiet performance that will have you docking like a pro in no time.
Features:
No reservoir to install, no leaks, and no maintenance
High performance 5 blade propellers give equal thrust in both directions
High integrity seal
Spline driven propeller, no drive pin or anode required
Blue box electronics prevent misuse and protect motor
Hardened and ground spiral bevel gear for maximum efficiency and quiet power transmission
Self-resetting thermal protection
Easy plug together switch connections
Minimum silhouette hub for smooth water flow
Technical Specifications:
Voltage - 12V
Power - 2.2 KW
Power - 3 HP
Tunnel Size - 5.5"
Thrust - 92lb
Weight - 29lb
*Sold as an Individual
|
1925.68 |
|
|
140TT 2.0kW Bow Thruster Kit -12V
Maneuvering around the dock area can be difficult, but Lewmar’s TT Thrusters make docking simple.
The revolutionary design of the TT propeller, the latest in Lewmar’s long history of custom thruster solutions, achieves a perfectly even thrust in both directions for maximum control and maneuverability.
All Lewmar Thrusters have been extensively tested, resulting in a smooth, efficient, and quiet performance that will have you docking like a pro in no time.
Features:
No reservoir to install, no leaks, and no maintenance
High performance 5 blade propellers give equal thrust in both directions
High integrity seal
Spline driven propeller, no drive pin or anode required
Blue box electronics prevent misuse and protect the motor
Hardened and ground spiral bevel gear for maximum efficiency and quiet power transmission
Self-resetting thermal protection
Easy plug together switch connections
Minimum silhouette hub for smooth water flow
Kit Includes:
(589012) 200AMP ANL Type Fuse
(589013) T2 Fuse Holder ANL Type Fuses
(589017) 10M Control Cable and Connectors
(589096) 140 Support Bracket Kit
(5914820) 140TT2.0KW 12V Tunnel Thruster
Technical Specifications:
Voltage - 12V
Power - 2.0 KW
Power - 2.7 HP
Tunnel Size - 5.5"
Thrust - 81lb
Weight - 29lb
*Sold as an Individual
|
2040.28 |
|
|
Don't miss out the entire month of June with super savings up to $250 off Maxwell Windlasses. Maxwell products are renowned for their reliability and performance throughout the international marine leisure boat industry.
Sale valid now until June 30th, 2017.
Don't miss out the entire month of June with super savings up to $250 off VETUS Bow Thrusters. *Please note: Special Order VETUS Bow Thrusters are on sale also. VETUS develops products that are easy to install and need little maintenance.
Sale valid now until June 30th, 2017.
Specials Closeouts Remanufactured Rebates
|
|
|
Don't miss out the entire month of June with super savings up to $250 off Maxwell Windlasses. Maxwell products are renowned for their reliability and performance throughout the international marine leisure boat industry.
Sale valid now until June 30th, 2017.
Don't miss out the entire month of June with super savings up to $250 off VETUS Bow Thrusters. *Please note: Special Order VETUS Bow Thrusters are on sale also. VETUS develops products that are easy to install and need little maintenance.
Sale valid now until June 30th, 2017.
Specials Closeouts Remanufactured Rebates
|
|
|
Lewmar 140 Bow Thruster Zinc Disc Anode
Tecnoseal Lewmar Bow Thruster Zinc Anode 589150 for salt water use . For 140mm diameter tunnel 140TT. Purchase in pairs – add 2 to basket. Original part number 589150. Diameter 37mm.
|
11.69 |
|
|
Lewmar 185 Bow Thruster Zinc Disc Anode
Tecnoseal Lewmar Bow Thruster Zinc Anode 589350 for salt water use – 185mm diameter tunnel. Sold individually. Original part number 589350 for 185TT. Diameter 45mm.
|
15.91 |
|
|
Lewmar 250-300 Bow Thruster Zinc Disc Anode
Tecnoseal Lewmar Bow Thruster Zinc Anode for salt water use – fits 250TT and 300TT models.Sold individually. Original part number 589550. Diameter 60mm.
|
25.61 |
|
|
BOW PRO 651 Bow Thruster 65KGF - 12V
Our BOW PRO thrusters are fitted with proven induction technology. This system makes the use of carbon brushes obsolete. As a result, the bow thruster is very quiet and has indefinite* run-time! The (AC) induction motor is controlled by the VETUS MCV motor controller. This in-house-engineered motor controller can handle both 12V, 24V and AC motors, making the new bow thruster suitable for almost all boats!
The BOW PRO thruster is controlled by a proprietary CANBUS protocol. There are two different panels available for this thruster; one fully-proportional basic panel and one fully-proportional panel with lock-function. This allows the boat to be moored without the use of ropes. Letting passengers board your vessel have never been this easy! Evolution is to continue on a set of good properties, so there are similarities with its predecessors: remained are the very silent propeller blades and the streamlined tailpiece. Retrofitting a BOW PRO thruster, therefore, is a piece of cake as the new motor is interchangeable with the tailpiece and flange of our thruster range.
Features:
Range of Boat Size: 34ft - 36ft
Thrust in pounds force: 143 lbs
Motor horse power: 4
Tunnel- center line below the waterline: 185MM
Voltage: 12V
Precision proportional control
Endurance Rated Run-time - up to 10 minutes (dependant on model) at full power
Maintenance-free brushless motor
Sealed ingression protection construction - motor sealed for improved corrosion resistance in damp bilge environments
Built-in over-temp and low battery voltage protection
Suitable for high demanding applications (e.g. for use in rental & charter vessels)
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
3423.54 |
|
|
BOW PRO 421 Bow Thruster 42KGF - 12V
The BOW PRO thrusters are fitted with proven induction technology. This system makes the use of carbon brushes obsolete. As a result, the bow thruster is very quiet and has indefinite* run-time! The (AC) induction motor is controlled by the VETUS MCV motor controller. This in-house-engineered motor controller can handle both 12V, 24V and AC motors, making the new bow thruster suitable for almost all boats!
The BOW PRO thruster is controlled by a proprietary CANBUS protocol. There are two different panels available for this thruster; one fully-proportional basic panel and one fully-proportional panel with lock-function. This allows the boat to be moored without the use of ropes. Letting passengers board your vessel have never been this easy! Evolution is to continue on a set of good properties, so there are similarities with its predecessors: remained are the very silent propeller blades and the streamlined tailpiece. Retrofitting a BOW PRO thruster, therefore, is a piece of cake as the new motor is interchangeable with the tailpiece and flange of our thruster range.
Features:
Range of Boat Size: 25ft - 30ft
Thrust in pounds force: 93 lbs
Motor horse power: 4
Tunnel- center line below the waterline: 125MM
Voltage: 12V
Precision proportional control
Endurance Rated Run-time - up to 10 minutes (dependant on model) at full power
Maintenance-free brushless motor
Sealed ingression protection construction - motor sealed for improved corrosion resistance in damp bilge environments
Built-in over-temp and low battery voltage protection
Suitable for high demanding applications (e.g. for use in rental & charter vessels)
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
3083.01 |
|
|
BOW PRO 761 Bow Thruster 76KGF - 12V
The BOW PRO thrusters are fitted with proven induction technology. This system makes the use of carbon brushes obsolete. As a result, the bow thruster is very quiet and has indefinite* run-time! The (AC) induction motor is controlled by the VETUS MCV motor controller. This in-house-engineered motor controller can handle both 12V, 24V and AC motors, making the new bow thruster suitable for almost all boats!
The BOW PRO thruster is controlled by a proprietary CANBUS protocol. There are two different panels available for this thruster; one fully-proportional basic panel and one fully-proportional panel with lock-function. This allows the boat to be moored without the use of ropes. Letting passengers board your vessel have never been this easy! Evolution is to continue on a set of good properties, so there are similarities with its predecessors: remained are the very silent propeller blades and the streamlined tailpiece. Retrofitting a BOW PRO thruster, therefore, is a piece of cake as the new motor is interchangeable with the tailpiece and flange of our thruster range.
Features:
Range of Boat Size: 35ft - 39ft
Thrust in pounds force: 167 lbs
Motor horse power: 6
Tunnel- center line below the waterline: 185MM
Voltage: 24V
Precision proportional control
Endurance Rated Run-time - up to 10 minutes (dependant on model) at full power
Maintenance-free brushless motor
Sealed ingression protection construction - motor sealed for improved corrosion resistance in damp bilge environments
Built-in over-temp and low battery voltage protection
Suitable for high demanding applications (e.g. for use in rental & charter vessels)
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
3809.03 |
|
|
BOW PRO 571 Bow Thruster 57KGF - 12V
The BOW PRO thrusters are fitted with proven induction technology. This system makes the use of carbon brushes obsolete. As a result, the bow thruster is very quiet and has indefinite* run-time! The (AC) induction motor is controlled by the VETUS MCV motor controller. This in-house-engineered motor controller can handle both 12V, 24V and AC motors, making the new bow thruster suitable for almost all boats!
The BOW PRO thruster is controlled by a proprietary CANBUS protocol. There are two different panels available for this thruster; one fully-proportional basic panel and one fully-proportional panel with lock-function. This allows the boat to be moored without the use of ropes. Letting passengers board your vessel have never been this easy! Evolution is to continue on a set of good properties, so there are similarities with its predecessors: remained are the very silent propeller blades and the streamlined tailpiece. Retrofitting a BOW PRO thruster, therefore, is a piece of cake as the new motor is interchangeable with the tailpiece and flange of our thruster range.
Features:
Range of Boat Size: 28ft - 34ft
Thrust in pounds force: 125 lbs
Motor horse power: 4
Tunnel- center line below the waterline: 150MM
Voltage: 24V
Precision proportional control
Endurance Rated Run-time - up to 10 minutes (dependant on model) at full power
Maintenance-free brushless motor
Sealed ingression protection construction - motor sealed for improved corrosion resistance in damp bilge environments
Built-in over-temp and low battery voltage protection
Suitable for high demanding applications (e.g. for use in rental & charter vessels)
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
3434.07 |
|
|
Bow Thruster - 55 kgf - 12V
The Vetus 55 kgf is arguably the most popular bow thruster for yachts and powerboats from 28 to 41 feet in length. Manufactured using the highest quality materials to give high power and long service life.
The Vetus 55 kgf unit is one of the few thrusters for this class of vessel with a 150mm diameter tunnel - making it much easier to fit than competitors with standard 185mm units.
Features:
A single propeller creates less flow disturbance in the tunnel
Unique propeller blade design minimizes cavitation noise
Spiral gears minimize transmission noise
Flexible coupling between tail piece and motor eliminates vibration
Streamlined tail piece for optimal flow
Strong synthetic propeller eliminates corrosion and reduces weight
Easy to install, supplied with clear installation and operation instructions
All Vetus maneuvering systems meet the EMC requirements
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
2110.73 |
|
|
Bow Thruster 7512D 75KGF-12V-D185MM
VETUS bow thruster with 75 kgf thrust force, suitable for boats from 10.5M to 15M in length.
12V version.
Features
A single propeller creates less flow disturbance in the tunnel
The VETUS unique propeller blade design minimizes cavitation noise
The use of a flexible coupling between tail piece and motor eliminates vibration
All VETUS systems use a streamlined tail piece for optimum flow
A strong synthetic propeller eliminates corrosion and reduces weight
Systems are easy to install, supplied with clear installation and operation instructions
VETUS systems use a new line of high quality aluminium control panels which are interchangeable with older panels
All VETUS manoeuvring systems meet the EMC requirements
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
2410.26 |
|
|
Zinc Anode Set f/Bow Thruster - 35/55 kgf Bow Thrusters
Spare set zinc anode for 35/55 kgf bow thrusters. Supplied with two stainless steel allen head countersunk set screws.
|
60.95 |
|
|
Bow Thruster BTQ 110-25 25KGF - 12V - D110 - 1.3kW
Better Performances, Lower Absorption
The 4-blade Propellers guarantee maximum thrust performance and reduction in current absorption. They are made of composite materials, resistant in every condition. The counter-rotating system offers better thrust performances. The two props have been designed to suit left side and right side, to guarantee the same upper performances in both directions.
Features:
The Gearbox is created so that the behavior of the propeller is unaffected in either direction.
The bronze propeller gearleg is provided with a hydrodynamic profile that minimizes turbulence.
Maintenance is not required since the special highly resistant components guarantee a perfect lubrication seal for life.
The anodic aluminum protection is easily replaceable. In case of total corrosion of the anode, the prop doesn’t get lost because it’s fixed directly to the pod, independently from the anode.
The elastic joint that optimizes the alignment between motor and gearbox is an exclusive Quick design. This acts as an even tension device, preserving the operating system from impulses from the bow thruster, with above-average results.
The Motors
New-generation materials have been chosen to constantly guarantee required output and maximum performance, given the severe conditions required by the application.
Top Safety
In case of relays’ melting, the TMS remote circuit breaker system switch-off the power to the motor from any place where a TDC panels or a TSC emergency mushroom panels are installed. Motor temperature sensor BTQ motors don’t need the thermic sensor to be able to always provide the maximum power when needed. The overheating protection is controlled by the software inside the touch panel or the joystick panel.
|
1367.80 |
|