Polished Stainless Steel Rim LED Courtesy Lamp - Blue Attractive, energy efficient lighting for interior and exterior use. Hella Marine round LED courtesy lamps can be installed almost anywhere on board. Over 3 x brighter than regular Soft Light White and Warm White LED courtesy lamps. Advanced lens technology provides a cool and even spread of soft light without glare or eye strain. Hella Marine LED courtesy lamps consume a fraction of the energy of traditional bulb lamps and run very cool due to their low current draw of less than 0.5W (less than 0.04A @ 12V). This provides safer installation into light weight materials where the heat of incandescent lamps may cause damage to the surrounding structure. Each lamp is completely sealed, highly shock, impact and vibration resistant, perfectly suited for the demanding marine environment. Enhanced brightness lamps include a surface mounting ring with 3 x stainless steel screws. Stainless steel and white rim lamps include a white spacer, black rim lamps a black spacer.  Specifications: Lens Material: UV resistant enhanced impact acrylic Rim Material: UV resistant plastic. 316 stainless steel Dimming: Dimmed via Hella Marine Dimmer 5XA 998 572-001 Cable: Pre-wired with 120mm of single core marine cable Operating Voltage: 12V DC or 24V DC Power Consumption: < 0.5W ( < 0.042A @ 12V / < 0.02A @ 24V ) Degree of Protection: IP 67 - Completely Sealed Mounting: Stainless steel screws included Weight: 50g (including cable)

316 Polished Stainless Steel LED Waterproof Courtesy Light - Blue - 12VDC Only Now a courtesy light that is stylish, compact and easy to install. The 316 Stainless steel IP67 design lets you mount either inside or out. 10-40V version Includes inline driver (IP20) that provides continuous light from 10-40VDC. Available in Warm White or Blue includes 1M (3 Ft) Cable. Elegance in simplicity. Features: 60 Degree Spread IP67 – Durable Waterproof Operation Soft Light Output 2-Year Warranty Wattage: 1W Input Voltage: 12VDC

Surface Strip Light w/Switch - Warm White/Blue LEDs - 12V The Surface Mount Strip lamps from Hella marine feature an innovative waterproof switch for reliable operation. Completely sealed, UV and corrosion resistant and an ultra-low profile these install lamps are easy to install and ideal for interior or exterior applications. Offering exceptional light output and an ultra-low power consumption of <3W, these lamps are an ideal replacement for bulky fluorescent lighting. Producing 250 lumens (White) and offering a leading CRI rating of 85 these LEDs will enhance the appearance of your vessel and provide bright and accurate illumination. The sealed switch system prevents moisture and other contaminants from effecting electronics, while the low profile design offers an effortless surface mount installation almost anywhere on board. Fastenings at each end of the lamp body are covered by snap-on end caps for a clean and modern appearance. Purpose designed for the harsh marine environment, surface mount strip lamps are salt water durable and thoroughly tested to withstand high levels of vibration, impact, and shock loads. The housings are precision manufactured from advanced UV resistant acrylic and are completely sealed, therefore ideal for interior and exterior, wet or dry applications. These lamps are an excellent for chart lamps, above bench tops, bulk head lamps and around bait boards to name only a few applications. Hella marine surface mount LED strip lamps offer class leading energy efficiency and unmatched durability and are supported with a 5 year warranty for a total ‘fit and forget’ solution and complete peace of mind. Specifications: Lens Material: UV resistant enhanced impact acrylic Color Temperature: 5000K (White) 2700K (Warm White) Power Consumption: < 3.0W ( < 0.25A @ 12V / < 0.16A @ 24V ) Operating Voltage: 12V DC or 24V DC Dimming: Hella marine Dimmer 5XA 998 572-001 Cable: Pre-wired with 500mm of twin core cable Degree of Protection: Completely Sealed IP 67 Installation: Surface Mount Weight: 75g (including cable) Approvals: CE

DuraLED 50 Low Profile Interior/Exterior Lamp - White LED Spreader Beam DuraLED 50LP offers increased light output in an ultra-low profile housing. DuraLED 50LP lamps are an extremely powerful source of white light and offer a safe, energy efficient and reliable alternative to incandescent and fluorescent lighting within an easy to install, surface mount design. These high tech, low profile lamps are available in two light patterns, Spread and Wide Spread, to suit a variety of applications including engine rooms, storage lockers, lazarettes and other heavy duty applications where reliability cannot not be compromised. Each lamp is completely sealed, UV, impact and shock resistant ensuring an ultra-long service life. Multivolt™ circuitry provides constant illumination and circuit protection from 9-33V DC, even under severe voltage fluctuations. DuraLED 50LP lamps meet the requirements of ISO 8846 - Protection against ignition of surrounding flammable gasses by Electrical devices on Small Craft. For details please refer to the Standard. Hella Marine DuraLED 50LP lamps offer class leading energy efficiency, unmatched durability and are supported with a 5 year warranty for a total ‘fit and forget’ solution and complete peace of mind. Specifications: Lens Material: UV resistant, enhanced impact acrylic Color Temperature: 5000K (White) Cable: Pre-wired with 2.5M of twin core marine cable Operating Voltage: 9-33V DC Voltage Protection: Spike protected to +500 volts, Reverse polarity protected to -700 volts Power Consumption: < 12W Degree of Protection: IP 67 - Completely Sealed Weight: 380g (including cable) Installation: Surface mount with robust bush mount Approvals: CE, ISO 8846 (Ignition Protection)

316 Polished Stainless Steel LED Waterproof Courtesy Light - Warm White - 12VDC Only Now a courtesy light that is stylish, compact and easy to install. The 316 Stainless steel IP67 design lets you mount either inside or out. 10-40V version Includes inline driver (IP20) that provides continuous light from 10-40VDC. Available in Warm White or Blue includes 1M (3 Ft) Cable. Elegance in simplicity. Features: 60 Degree Spread IP67 – Durable Waterproof Operation Soft Light Output 2-Year Warranty Wattage: 1W Input Voltage: 12VDC

Aurora LED Dome Light - Polished Stainless Steel Finish - 2-Color White/Blue Dimming Customers told us they wanted a high quality LED replacement for the ubiquitous dome light. It had to be bright, with wide even light. They wanted a clean look, an intuitive and reliable switch, and a notable level of quality. We delivered, and then added IP67 immersion protection. We then raised the bar with multiple color output options and dimming. Lumitec's Aurora Dome Light stands apart. Specifications: Voltage: 10 - 30vDC 12vDC Amps: 290mA 24vDC Amps: 160mA Correlated Color Temperature: 5000 Color Rendering Index: 70+ Rated Watts: 4 Lumens (White):180 Operating Temp (°F): -31 to + 131 F Operating Temp (°C): -35 to +55 C Width: 4.00 (10.16cm) Height: 4.00" (10.16cm) Depth: 0.73" (1.84cm) WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Lumitec TouchDome - Dome Light - Polished Stainless Steel Finish - 2-Color White/Blue Dimming Brilliantly designed. That is what you will think when you use Lumitec's innovative Touch Dome. Of course the light is completely sealed and has no o-rings, baffles, or switches to wear out. But more impressively, unlike old-technology capacitive or e-field switches, the Touch Dome is reliable even when wet or with gloves. Proprietary Optical Field Sense technology provides on, off, color change and even dimming. Beautifully designed, elegantly functional. Specifications: Voltage: 10 - 30V DC 12V DC Amps: 410mA 24V DC Amps: 215mA Correlated Color Temperature: 5000 Color Rendering Index: 70+ Rated Watts: 6 Lumens (White): 244 Operating Temp (°F): -31 to + 131 F Operating Temp (°C): -35 to +55 C Width: 6.75" (17.15cm) Height: 6.75" (17.15cm) Depth: 3.18" (8.06cm) WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Shadow - Flush Mount Down Light - Polished Stainless Steel Finish - 3-Color Red/Blue Non Dimming with White Dimming Shadow is versatile and tough, with incredible output greater than a 20W Halogen. Completely sealed (IP 67), Shadow is available with Lumitec's TTP technology, enabling dimming and color change with a standard 2-wire hookup and any on/off switch. Shadow is also compatible with 3rd party controllers including dimmers, flashers, and scene controllers. Specifications: Voltage: 10 - 30V DC 12V DC Amps: 490mA 24V DC Amps: 250mA Correlated Color Temperature: 5000 Color Rendering Index: 70+ Lumens (White): 6 Rated Watts: 372 Operating Temp (°F): -31 to + 131 F Operating Temp (°C): -35 to +55 C Width: 3.50" (8.88cm) Height: 3.50" (8.88cm) Depth: 1.10" (2.79cm) WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Mirage - Flush Mount Down Light - Glass Finish/Polished Stainless Steel Bezel - 4-Color Red/Blue/Purple Non Dimming with White Dimming Lumitec's Mirage down lights remain the best performing down light on the market today. Utilizing the most efficient emitters commercially available, Mirage boasts incredible output and a profile that is among the slimmest in the industry. In field studies Mirage exceeded the output of 20 watt halogens.* Equally suited to elegant salons or no-nonsense T-tops. (*6 watt devices will exceed output of 20 watt halogens, 3 watt devices will exceed output of 10 watt halogens). Specifications: Voltage: 10 - 30V DC 12V DC Amps: 490mA 24V DC Amps: 250mA Correlated Color Temperature: 5000 Color Rendering Index: 70+ Rated Watts: 6 Lumens (White): 372 Operating Temp (°F): -31 to + 131 F Operating Temp (°C): -35 to +55 C Width: 3.25" (8.25cm) Height: 3.25" (8.25cm) Depth: 1.11" (2.81cm) WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Mirage - Flush Mount Down Light - Glass Finish/Polished Stainless Steel Bezel - 3-Color Red/Blue Non-Dimming with White Dimming Lumitec's Mirage down lights remain the best performing down light on the market today. Utilizing the most efficient emitters commercially available, Mirage boasts incredible output and a profile that is among the slimmest in the industry. In field studies Mirage exceeded the output of 20 watt halogens.* Equally suited to elegant salons or no-nonsense T-tops. (*6 watt devices will exceed output of 20 watt halogens, 3 watt devices will exceed output of 10 watt halogens). Specifications: Voltage: 10 - 30V DC 12V DC Amps: 490mA 24V DC Amps: 250mA Correlated Color Temperature: 5000 Color Rendering Index: 70+ Rated Watts: 6 Lumens (White): 372 Operating Temp (°F): -31 to + 131 F Operating Temp (°C): -35 to +55 C Width: 3.25" (8.25cm) Height: 3.25" (8.25cm) Depth: 1.11" (2.81cm) WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

12x12 Polished Stainless Steel Trim Tab Kit Improve fuel economy and passenger comfort with Uflex electromechanical trim tabs. Featuring electropolished stainless steel planes and low consumption, high speed, composite actuators, these tabs are built to last in the most demanding sea conditions. Uflex trim tabs have been specifically designed for easy installation using a quick connect bracket actuator, requiring only one small hole per tab through the transom. The patented transom mounting bracket encapsulates the wiring to ensure protection against any wiring damage.

Mirage - Flush Mount Down Light - Glass Finish/Polished Stainless Steel Bezel - 2-Color White/Blue Dimming Lumitec's Mirage down lights remain the best performing down light on the market today. Utilizing the most efficient emitters commercially available, Mirage boasts incredible output and a profile that is among the slimmest in the industry. In field studies Mirage exceeded the output of 20 watt halogens.* Equally suited to elegant salons or no-nonsense T-tops. (*6 watt devices will exceed output of 20 watt halogens, 3 watt devices will exceed output of 10 watt halogens). Specifications: Voltage: 10 - 30V DC 12V DC Amps: 490mA 24V DC Amps: 250mA Correlated Color Temperature: 5000 Color Rendering Index: 70+ Rated Watts: 6 Lumens (White): 372 Operating Temp (°F): -31 to + 131 F Operating Temp (°C): -35 to +55 C Width: 3.25" (8.25cm) Height: 3.25" (8.25cm) Depth: 1.11" (2.81cm) WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Bennett Trim Tabs on Sale in April at CLR Marine       Bennett Trim Tab Kit with Euro-Style Rocker Switch Now until April 30, 2012, Bennett Trim Tab Kits are on sale with an additional 10% off on all sets with Euro controls. Bennett Standard Trim Tab Kits are ideal for cruisers who want to optimize performance over a broad range of sea conditions. The Euro-Style Rocker Switch is included with these trim tab sets. Kits are complete with all the necessary components for installation.     Bennett Trim Tab Kit with Electronic Indicator Control (EIC) Bennett Trim Tab EIC Sets have been discounted for 2012 - that's a 25% savings on the cost of an EIC5000 when purchased in the set. These kits contain two stainless steel trim tabs, two preasembled actuators with sensors, a hydraulic power unit, Electronic Indicator Control (EIC) all necessary wiring, tubing, hardware and installation instructions. 3-in-1: : The Electronic Indicator Control saves space on the helm by combining three features into one sophisticated control - the popular Bennett rocker switch control, trim tab indicator and the Auto Tab Retractor. Water resistant, highly accurate and features variable intensity LEDs for night or day. The Auto Tab Retractor automatically retracts the tabs when the boat's ignition is turned off. This especially protects trailered or dry storage boats from getting trim tab damage during storing, hauling and trailering.     Bennett Trim Tab AC3000 Keypad ATC-Ready: The EIC is also designed to connect easily with another innovative product, the Auto Tab Control (ATC). The ATC plugs right into the EIC Relay Module, interacting directly with the trim tab system to automatically monitor and maintain the perfect cruising attitude. The result is an optimum ride and significant fuel savings.     The Bennett Advantage: A trim tab system that is quiet, responsive, low-maintenance, and a great long-term value, with a 5-year warranty that Bennett stands behind without hassles or headaches.

Surface Mount Oblong LED Courtesy Lamp - Warm White LED - Stainless Steel Bezel Oblong LED lamps are offered as either dedicated step lamps or general courtesy illumination with equal vertical spread. Step lamps carry engineered optics to direct light downwards at 30° safely illuminating deck and step tread surfaces without shining into the eyes. Completely sealed and ultra durable, Hella Marine LED lamps may be installed on a vessels interior or exterior, wet or dry. Polished 316 Stainless Steel bezels are included with each part number. Black and white plastic end caps are also included. Specifications: Lens Material: UV and enhanced impact resistant Grilamid Rim Material: 316 stainless steel Cable: Pre-wired with 120mm of marine cable Operating Voltage: Multivolt 12 / 24V DC Power Consumption: 0.5W ( < 0.04A@12V / < 0.02A@24V ) Degree of Protection: IP 67 - Completely Sealed Mounting: Stainless steel screws included Weight: 35g (including cable) Approvals: CE

Surface Strip Light w/Switch - Warm White/Red LEDs - 12V The Surface Mount Strip lamps from Hella marine feature an innovative waterproof switch for reliable operation. Completely sealed, UV and corrosion resistant and an ultra-low profile these install lamps are easy to install and ideal for interior or exterior applications. Offering exceptional light output and an ultra-low power consumption of <3W, these lamps are an ideal replacement for bulky fluorescent lighting. Producing 250 lumens (White) and offering a leading CRI rating of 85 these LEDs will enhance the appearance of your vessel and provide bright and accurate illumination. The sealed switch system prevents moisture and other contaminants from effecting electronics, while the low profile design offers an effortless surface mount installation almost anywhere on board. Fastenings at each end of the lamp body are covered by snap-on end caps for a clean and modern appearance. Purpose designed for the harsh marine environment, surface mount strip lamps are salt water durable and thoroughly tested to withstand high levels of vibration, impact, and shock loads. The housings are precision manufactured from advanced UV resistant acrylic and are completely sealed, therefore ideal for interior and exterior, wet or dry applications. These lamps are an excellent for chart lamps, above bench tops, bulk head lamps and around bait boards to name only a few applications. Hella marine surface mount LED strip lamps offer class leading energy efficiency and unmatched durability and are supported with a 5 year warranty for a total ‘fit and forget’ solution and complete peace of mind. Specifications: Lens Material: UV resistant enhanced impact acrylic Color Temperature: 5000K (White) 2700K (Warm White) Power Consumption: < 3.0W ( < 0.25A @ 12V / < 0.16A @ 24V ) Operating Voltage: 12V DC or 24V DC Dimming: Hella marine Dimmer 5XA 998 572-001 Cable: Pre-wired with 500mm of twin core cable Degree of Protection: Completely Sealed IP 67 Installation: Surface Mount Weight: 75g (including cable) Approvals: CE