|
LED Surface Strip Light - White LED - 24V - No Switch
The Surface Mount Strip lamps from Hella marine are completely sealed, UV and corrosion resistant with an ultra-low profile meaning these lamps are easy to install and ideal for interior or exterior applications.
Offering exceptional light output and an ultra-low power consumption of <3W, these lamps are an ideal replacement for bulky fluorescent lighting. Producing 250 lumens (White) and offering a leading CRI rating of 85 these LEDs will enhance the appearance of your vessel and provide bright and accurate illumination.
The low profile design offers an effortless surface mount installation almost anywhere on board. Fastenings at each end of the lamp body are covered by snap-on end caps for a clean and modern appearance.
Purpose designed for the harsh marine environment, surface mount strip lamps are salt water durable and thoroughly tested to withstand high levels of vibration, impact, and shock loads. The housings are precision manufactured from advanced UV resistant acrylic and are completely sealed, therefore ideal for interior and exterior, wet or dry applications.
These lamps are an excellent for chart lamps, above bench tops, bulk head lamps and around bait boards to name only a few applications.
Hella marine surface mount LED strip lamps offer class leading energy efficiency and unmatched durability and are supported with a 5 year warranty for a total ‘fit and forget’ solution and complete peace of mind.
Specifications:
Lens Material: UV resistant enhanced impact acrylic
Color Temperature:5000K (White)
Power Consumption: < 3.0W ( < 0.25A @ 12V / < 0.16A @ 24V )
Operating Voltage: 12V DC or 24V DC
Dimming" Hella marine Dimmer 5XA 998 572-001
Cable: Pre-wired with 500mm of twin core cable
Degree of Protection: Completely Sealed IP 67
Installation: Surface Mount
Weight: 75g (including cable)
Approvals: CE
|
48.61 |
|
|
Apelo Underwater Lighting Brilliance By Hella Marine
Lets You Do It All Select between incredibly intense white or vibrant blue for amazing illumination experiences. Take complete control and choose any color you wish with Apelo RGB.
Apelo Redefines Entertaining Lighting
Optical Intelligence delivers more visible light spread across the transom. Apelo competes with rivals offering higher lumen ratings, while using less energy to achieve equal brightness.
Turn Up The Party, Select The Mood, Switch On The Fish Magnets. Apelo Underwater Lighting Brilliance Lets You Do It All. Apelo shines with more lux in wide horizontal and narrow vertical illumination where it counts. For the lumens, Apelo has superior brightness using less energy. Thermal polymer is employed, an inert housing material 100% resistant to corrosion and suitable for any hull material. The optical nylon lens is incredibly tough and will not embrittle or discolor in harsh UV.
*Keep in mind, while some other manufacturers are no longer making lights for recreation marine, Hella Marine has a direct replacement for almost every product.
Specials Closeouts Remanufactured Rebates
|
|
|
Many boaters find exploring underwater an adventure into a whole new world. Whether you are on a night dive or set to explore murky waters, choose the best lighting for safety. For a night dive, consider the number of lumens and the angle of a dive light. In an article by www.scubadiving.com,any light with an average beam angle between 12 degrees to 75 degrees and a lumen output of 200 or greater should work fine for any recreational diving. The beam should be far wider than most torches can produce to prevent a bright spot from appearing. A 90-degree beam should be sufficient for most wide-angle video cameras.
For many safety reasons, having lights underwater on a boat is a must. The lights cast a glow with a lantern-type beam to make your location more visible. Many captains mount lights under the swim step to improve safety when stepping on or off a boat.
Nighttime fishing has become extremely popular. An easy and effective way to attract fish at night is with appropriate lighting. The fish are not attracted to the light itself — they are attracted to the zooplankton that gathers around it.
Color matters when it comes to underwater lighting. The most effective colors are Green light and White light to attract fish to boats, docks, and piers. These colors are brighter and will attract fish from a greater distance. Blue light is less bright and is typically used more for ambient lighting.
In a future article, we will cover deck lights. For safety regarding boating at night, an on-deck spotlight is an essential piece of equipment. Many skippers have been saved from an impending disaster because their searchlight beam lit up an unlit dock, break-wall, or buoy. The spotlight also helps you spot a person or object that has fallen into the water. It can aid in safety when needed to signal other boats.
When shopping for a spotlight, decide if you want one permanently installed or a handheld that can charge from a cigarette lighter receptacle. You can also purchase a battery-operated handheld light.
Golight Stryker Searchlight 12V w/Wired Dash Control w/20' Wire Harness – White
One of the preferred searchlights among skippers is the Golight Stryker Searchlight. It comes with a 20' wire harness and has a wireless dash-mount remote option. For broad sweeps with the beam, the searchlight has a 370x Rotation x 135-degree Tilt, with 200,000 Candela Beam Intensity. It is both UV Ray and Saltwater Resistant.
ACR RCL-300 Remote Controlled Searchlight - 12V/24V
The top-of-the-line ACR RCL-300 Remote Controlled Searchlight – 12V/24V has feature upon feature with its versatility and ease with touch control. It includes fingertip remote control Point Pad™; up to three remote Point Pad™ units may be installed on the system; surface/flush mount options included. The exclusive XRCiZ™ feature rotates and moves the light assembly every 30 days from activation to keep all bearing surfaces free of corrosion and all electrical contacts functional.
Underwater Lighting
Among the more popular LED hull-mounted lights is the OceanLED 2010XFM Pro Series HD Gen2 LED Underwater Lighting - Midnight Blue.
XFM models, or Xchangeable Flush Mounts, are exchangeable without hauling should service be needed. The light can be retrofitted into most existing underwater lighting hole cut-outs, yielding immediate benefits of no startup power surge, low heat, minimal maintenance, and improved light output. It offers 7,000-fixture lumen brightness with the 2010XFM HD Gen2 model.
For additional information and pricing on the lighting listed here, go to https://www.clrmarine.com/462m4/lighting.html.
Fair Winds, Smooth Sailing.
____________________________________________________________________________________________________
To obtain more information about the products and services mentioned in this article, please contact CLR Marine https://www.clrmarine.com/.
Award-winning author Cheryl Kuba has been at the helm for more than 30 years sailing the Great Lakes, with side trips to the British Virgin Islands and St. Maarten. She has served as past- Commodore of Great Lakes Fleet 21 -Chicago region. 3happycampers.com
©Copyright Cheryl Kuba, 3happycampers.com
|
|
|
Surface Strip Light w/Switch - Warm White/Red LEDs - 12V
The Surface Mount Strip lamps from Hella marine feature an innovative waterproof switch for reliable operation. Completely sealed, UV and corrosion resistant and an ultra-low profile these install lamps are easy to install and ideal for interior or exterior applications.
Offering exceptional light output and an ultra-low power consumption of <3W, these lamps are an ideal replacement for bulky fluorescent lighting. Producing 250 lumens (White) and offering a leading CRI rating of 85 these LEDs will enhance the appearance of your vessel and provide bright and accurate illumination.
The sealed switch system prevents moisture and other contaminants from effecting electronics, while the low profile design offers an effortless surface mount installation almost anywhere on board. Fastenings at each end of the lamp body are covered by snap-on end caps for a clean and modern appearance.
Purpose designed for the harsh marine environment, surface mount strip lamps are salt water durable and thoroughly tested to withstand high levels of vibration, impact, and shock loads. The housings are precision manufactured from advanced UV resistant acrylic and are completely sealed, therefore ideal for interior and exterior, wet or dry applications.
These lamps are an excellent for chart lamps, above bench tops, bulk head lamps and around bait boards to name only a few applications.
Hella marine surface mount LED strip lamps offer class leading energy efficiency and unmatched durability and are supported with a 5 year warranty for a total ‘fit and forget’ solution and complete peace of mind.
Specifications:
Lens Material: UV resistant enhanced impact acrylic
Color Temperature: 5000K (White) 2700K (Warm White)
Power Consumption: < 3.0W ( < 0.25A @ 12V / < 0.16A @ 24V )
Operating Voltage: 12V DC or 24V DC
Dimming: Hella marine Dimmer 5XA 998 572-001
Cable: Pre-wired with 500mm of twin core cable
Degree of Protection: Completely Sealed IP 67
Installation: Surface Mount
Weight: 75g (including cable)
Approvals: CE
|
69.88 |
|
|
Surface Strip Light w/Switch - Warm White/Blue LEDs - 12V
The Surface Mount Strip lamps from Hella marine feature an innovative waterproof switch for reliable operation. Completely sealed, UV and corrosion resistant and an ultra-low profile these install lamps are easy to install and ideal for interior or exterior applications.
Offering exceptional light output and an ultra-low power consumption of <3W, these lamps are an ideal replacement for bulky fluorescent lighting. Producing 250 lumens (White) and offering a leading CRI rating of 85 these LEDs will enhance the appearance of your vessel and provide bright and accurate illumination.
The sealed switch system prevents moisture and other contaminants from effecting electronics, while the low profile design offers an effortless surface mount installation almost anywhere on board. Fastenings at each end of the lamp body are covered by snap-on end caps for a clean and modern appearance.
Purpose designed for the harsh marine environment, surface mount strip lamps are salt water durable and thoroughly tested to withstand high levels of vibration, impact, and shock loads. The housings are precision manufactured from advanced UV resistant acrylic and are completely sealed, therefore ideal for interior and exterior, wet or dry applications.
These lamps are an excellent for chart lamps, above bench tops, bulk head lamps and around bait boards to name only a few applications.
Hella marine surface mount LED strip lamps offer class leading energy efficiency and unmatched durability and are supported with a 5 year warranty for a total ‘fit and forget’ solution and complete peace of mind.
Specifications:
Lens Material: UV resistant enhanced impact acrylic
Color Temperature: 5000K (White) 2700K (Warm White)
Power Consumption: < 3.0W ( < 0.25A @ 12V / < 0.16A @ 24V )
Operating Voltage: 12V DC or 24V DC
Dimming: Hella marine Dimmer 5XA 998 572-001
Cable: Pre-wired with 500mm of twin core cable
Degree of Protection: Completely Sealed IP 67
Installation: Surface Mount
Weight: 75g (including cable)
Approvals: CE
|
69.88 |
|
|
EuroLED 175 Surface Mount Touch Lamp - Blue/White LED - White Housing
Advanced LED lamps with touch sensitive switching. Power saving and ultra durable. Designed and manufactured in New Zealand, EuroLED® Touch lamps provide red / white light using the latest completely sealed touch sensitive technology.
Lighting control is beautifully simple. Touch the color pad for red or blue light, the white pad for white light. On the dual color versions, hold your finger on the pad for more than two seconds and the lamp will cycle through four dimming levels. Release your finger on the light level required.
Dual color EuroLED® Touch lamps can also be remotely operated from multiple points with ‘off the shelf’ ON/OFF/ON momentary switches. Holding one of the external switches for two seconds will synchronize the lamps to the same dimming level. Light levels are ‘remembered’ by the lamps circuitry, even when a vessel’s batteries are turned off. The lamp will always turn on at the color intensity previously set, regardless of power interruption.
EuroLED® Touch current draw is 4W on white (0.33A @ 12V) and less than 1.5W on red or blue (less than 0.125A @ 12V) to provide significant power savings. Glare diffusion without light loss is important with any LED lamp to maintain efficiency and safety, particularly with powerful lamps such as the EuroLED® series. Without the protection of advanced optics, significant eye strain can result from periods of looking directly into a powerful LED point source. Advanced Hella marine lens technology provides a safe, smooth and uniform light pattern, without glare or discomfort.
The durability of EuroLED® Touch lamps is outstanding. Each lamp is completely waterproof, impact and shock resistant, for an ultra long service life. Multivolt™ circuitry provides consistent illumination across a range of input voltages from 9-33 DC, even under severe voltage fluctuations.
Specifications:
Lens Material: UV resistant enhanced impact acrylic
Shroud Material: Heavy duty nylon
Color Temperature: 5000K (White)
Cable: Pre-wired with 2.5M of three core marine cable
Operating Voltage: Multivolt 9-33V DC
Power Consumption: 4.0W ( 0.33A@12V / 0.16A@24V )
Degree of Protection: IP 6K6 6K7 - Completely Sealed
Weight: 290g (including cable)
Installation: Surface mount with robust bush mount
Approvals: CE, ISO 8846 (Ignition Protection)
|
153.42 |
|
|
LED Deck Light - White Housing - 1200 Lumens
Hella Marine introduces the low profile and powerful FMS LED deck lamps. These surface-mount scene lamps are purpose-designed to integrate discreetly in tight spaces and exterior recesses yet throw a huge amount of light wherever they are installed. With a protrusion of only 38 mm, the FMS-Lamps are sleek and unobtrusive during the day but make themselves very well-known at night!
Two light intensities are offered: the FMS1200 with 1200 lumens; and the FMS2500 with an even more powerful 2500 lumens. This light is a 1200 lumens option, but both lamps offer even close-range illumination directly underneath the lamp. The light is projected downwards at a fixed angle of 45 degrees, with no brackets to adjust.
Hella marine LED technology is the answer for energy-efficient, completely sealed, shock and vibration-resistant lighting. Advanced electronics provide consistent illumination and circuit protection across a range of inputs from 9–32VDC for a long service life.
Features:
Deck floodlight for surface mounting
Low profile design
Close-range illumination
1200 lumens
Energy-efficient and durable LED technology
Specifications:
Housing Material: Die-cast aluminum, CoroSafe coating
Lens: Widespread diffuser
Mounting: Surface mount
Lumen: 1200 lumens
Color Temperature: 6500K (White)
Cable: Pre-wired with 500mm cable
Operating Voltage: Multivolt™ 9-32V DC, Nominal 12/24V DC
Power Consumption: 14W
Degree of Protection: IP 6K8 (Protection against dust and prolonged water immersion)
IP 6K9K (Protection against dust and high-pressure/steam jet cleaning)
Weight: 600g (including cable)
Approvals: ECE-R10, RCM, ADR/ GGVSEB
|
75.95 |
|
|
LED Deck Light - White Housing - 2500 Lumens
Hella Marine introduces the low profile and powerful FMS LED deck lamps. These surface-mount scene lamps are purpose-designed to integrate discreetly in tight spaces and exterior recesses yet throw a huge amount of light wherever they are installed. With a protrusion of only 38 mm, the FMS-Lamps are sleek and unobtrusive during the day but make themselves very well-known at night!
Two light intensities are offered: the FMS1200 with 1200 lumens; and the FMS2500 with an even more powerful 2500 lumens. This light is the 2500 lumens option, but both lamps offer even close-range illumination directly underneath the lamp. The light is projected downwards at a fixed angle of 45 degrees, with no brackets to adjust.
Hella Marine LED technology is the answer for energy-efficient, completely sealed, shock and vibration-resistant lighting. Advanced electronics provide consistent illumination and circuit protection across a range of inputs from 9–32VDC for a long service life.
Features:
Deck floodlight for surface mounting
Low profile design
Close-range illumination
2500 lumens
Energy-efficient and durable LED technology
Specifications:
Housing Material: Die-cast aluminum, CoroSafe coating
Lens: Widespread diffuser
Mounting: Surface mount
Lumen: 2500 lumens
Color Temperature: 6500K (White)
Cable: Pre-wired with 500mm cable
Operating Voltage: Multivolt™ 9-32V DC, Nominal 12/24V DC
Power Consumption: 28W
Degree of Protection: IP 6K8 (Protection against dust and prolonged water immersion)
IP 6K9K (Protection against dust and high-pressure/steam jet cleaning)
Weight: 600g (including cable)
Approvals: ECE-R10, RCM, ADR/ GGVSEB
|
95.70 |
|
|
EuroLED 130 Surface Mount Touch Lamp - Red/White LED - White Housing
Advanced LED lamps with touch sensitive switching. Power saving and ultra durable. Designed and manufactured in New Zealand, EuroLED® Touch lamps provide red / white light using the latest completely sealed touch sensitive technology.
Lighting control is beautifully simple. Touch the color pad for red or blue light, the white pad for white light. On the dual color versions, hold your finger on the pad for more than two seconds and the lamp will cycle through four dimming levels. Release your finger on the light level required.
Dual color EuroLED® Touch lamps can also be remotely operated from multiple points with ‘off the shelf’ ON/OFF/ON momentary switches. Holding one of the external switches for two seconds will synchronize the lamps to the same dimming level. Light levels are ‘remembered’ by the lamps circuitry, even when a vessel’s batteries are turned off. The lamp will always turn on at the color intensity previously set, regardless of power interruption.
EuroLED® Touch current draw is 4W on white (0.33A @ 12V) and less than 1.5W on red or blue (less than 0.125A @ 12V) to provide significant power savings. Glare diffusion without light loss is important with any LED lamp to maintain efficiency and safety, particularly with powerful lamps such as the EuroLED® series. Without the protection of advanced optics, significant eye strain can result from periods of looking directly into a powerful LED point source. Advanced Hella marine lens technology provides a safe, smooth and uniform light pattern, without glare or discomfort.
The durability of EuroLED® Touch lamps is outstanding. Each lamp is completely waterproof, impact and shock resistant, for an ultra long service life. Multivolt™ circuitry provides consistent illumination across a range of input voltages from 9-33 DC, even under severe voltage fluctuations.
Specifications:
Lens Material: UV resistant enhanced impact acrylic
Shroud Material: Heavy duty nylon
Color Temperature: 5000K (White)
Cable: Pre-wired with 2.5M of three core marine cable
Operating Voltage: Multivolt 9-33V DC
Power Consumption: 4.0W ( 0.33A@12V / 0.16A@24V )
Degree of Protection: IP 6K6 6K7 - Completely Sealed
Weight: 290g (including cable)
Installation: Surface mount with robust bush mount
Approvals: CE, ISO 8846 (Ignition Protection)
|
153.42 |
|
|
DuraLED 12 Interior/Exterior Lamp with Switch - White LED - White Housing
DuraLed® lamps provide powerful white light and a safe, energy efficient and reliable alternative to incandescent and fluorescent lighting.
Designed and manufactured in New Zealand, compact DuraLed® lamps feature efficient power saving LED technology with an ultra wide spread of light.
Completely sealed and suitable for a wide range of interior or exterior applications, consumption is very low at less than 2.5W (less than 0.20A @ 12V), Switched versions feature completely sealed ON / OFF control via the center logo.
Hella Marine LED lamps represent the latest in class leading energy efficiency and maintenance free ‘fit and forget’ technology.
Specifications:
Lens Material: UV resistant, enhanced impact acrylic
Shroud Material: Heavy duty nylon
Color Temperature: 3000K (Warm White)
Cable: Pre-wired with 500mm of twin core marine cable
Operating Voltage: 12/24V DC
Power Consumption: < 2.5W ( < 0.20A @ 12V / < 0.10A @ 24V )
Degree of Protection: IP 67 - Completely Sealed
Weight: 115g (including cable)
Installation: Surface mount with robust bush mount
Approvals: CE, ISO 8846 (Ignition Protection)
|
98.74 |
|
|
NaviLED PRO Starboard Navigation Lamp - White - 3NM
This NaviLED Starboard lamp covers vessel requirements over 50m.
Hella Marine takes navigation lighting very seriously. Often a grudge fitment to comply with the rules, this light is essential when navigating at night.
All Hella marine products are designed with components that suppress possible interference, both emissions and susceptibility to emissions, to the limits prescribed in international standards. This prevents interference with radio, communication, navigation, and other electrical equipment on board.
Hella marine lamps are rated IP67 and completely sealed. UV from the sun, corrosive salt air, and constant vibration: these lamps are impervious to the marine environment.
With ultra-low power consumption from the highly efficient LED light source, this lamp also provides exacting light intensity across a wide range of voltage inputs, from 9V DC to 32V DC.
Made in New Zealand and fully supported by Hella Marine's 5-year warranty for peace of mind.
Specifications:
Lamp Type: Starboard Navigation
Dimensions (W x H): 3.43 x 3.54 inches (87mm x 90mm)
Lamp Color: White
Material Description: Hi-impact-resistant acrylic lens
Minimum Visible Distance: 3 nautical miles (powerboats only)
Cable: Pre-wired with 2.5m of tinned marine cable
Operating Voltage: Multivolt 9-33V DC for 12/24V applications
Voltage Protection: Spike protected to +500 volts. Reverse polarity protected to -500 volts
Power Consumption: <2W (0.17A@12V / 0.09A@ 24V DC)
Degree of Protection: IP67 (completely sealed)
Weight: 250g (including cable)
Approvals: IMO Col Reg 72, RINA, USCG, ABYC C-5, RCM, Maritime NZ
|
141.26 |
|
|
Surface Mount Oblong LED Courtesy Lamp - Warm White LED - Stainless Steel Bezel
Oblong LED lamps are offered as either dedicated step lamps or general courtesy illumination with equal vertical spread.
Step lamps carry engineered optics to direct light downwards at 30° safely illuminating deck and step tread surfaces without shining into the eyes.
Completely sealed and ultra durable, Hella Marine LED lamps may be installed on a vessels interior or exterior, wet or dry.
Polished 316 Stainless Steel bezels are included with each part number. Black and white plastic end caps are also included.
Specifications:
Lens Material: UV and enhanced impact resistant Grilamid
Rim Material: 316 stainless steel
Cable: Pre-wired with 120mm of marine cable
Operating Voltage: Multivolt 12 / 24V DC
Power Consumption: 0.5W ( < 0.04A@12V / < 0.02A@24V )
Degree of Protection: IP 67 - Completely Sealed
Mounting: Stainless steel screws included
Weight: 35g (including cable)
Approvals: CE
|
27.34 |
|
|
D-SS PRO Flood LED Surface Mount - Pair - White
One of RIGID's most versatile, compact lighting solutions just got better with the RIGID D-SS PRO, Dually-Side Shooter Professional Race Output LED pod. Perfect for any application that requires a wide spread beam, including A-Pillars, Fog Lights, and motorcycle applications. The D-SS PRO incorporates powerful optics and recently improved LED technology for greater output with the added benefit of additional LEDs aimed to the side for a much broader beam. The D-SS PRO packs a powerful punch with up to 102% more raw lumens depending on the optics chosen The D-SS PRO fixtures boast up to 120-degrees of horizontal lighting coverage when used in pairs or when used in the single light applications. The main forward-facing LEDs are available with RIGID's advanced Spot, Flood, or Driving optics, so there's a D-SS PRO lighting solution for nearly any application. The D-SS PRO LED lights are available in pairs with three side-shooting LEDs on one side of each fixture, or in single applications with a pair of side-shooting LEDs on both sides of the fixture. Only RIGID provides a broad, powerful lighting solution in such a compact package.
Features:
Family: D-SS Side Shooter | PRO
Optics: Flood
LED Color: White
Finish Color: White
Mount Type: Surface
Shipping Dimensions: 6" × 8" × 6"
Product Weight: 2.44lb
Sold As: Pair
Up to 50,000+ Hour Lifespan
IP68 Compliant
Impact Resistant Lens
GORE® Pressure Equalizing Vent
Harness & Switch Included
Mounting Brackets Included
Specifications:
Watts: 47
Amp Draw: 3.36
LED's: 7
Raw Lumens: 5544
Lux @ 10m: 71.29
Beam Distance: 84.4 m
Peak Beam Intensity: 7,129 cd
|
292.50 |
|
|
D-SS Series PRO Spot LED Surface Mount - Pair - White
One of RIGID's most versatile, compact lighting solutions just got better with the RIGID D-SS PRO, Dually-Side Shooter Professional Race Output LED pod. Perfect for any application that requires a wide spread beam, including A-Pillars, Fog Lights, and motorcycle applications. The D-SS PRO incorporates powerful optics and recently improved LED technology for greater output with the added benefit of additional LEDs aimed to the side for a much broader beam. The D-SS PRO packs a powerful punch with up to 102% more raw lumens depending on the optics chosen The D-SS PRO fixtures boast up to 120-degrees of horizontal lighting coverage when used in pairs or when used in the single light applications. The main forward-facing LEDs are available with RIGID's advanced Spot, Flood, or Driving optics, so there's a D-SS PRO lighting solution for nearly any application. The D-SS PRO LED lights are available in pairs with three side-shooting LEDs on one side of each fixture, or in single applications with a pair of side-shooting LEDs on both sides of the fixture. Only RIGID provides a broad, powerful lighting solution in such a compact package.
Features:
Family: D-SS Side Shooter | PRO
Optics: Spot
LED Color: White
Finish Color: White
Mount Type: Surface
Shipping Dimensions: 6" × 8" × 6"
Product Weight: 2.44lb
Sold As: Pair
Up to 50,000+ Hour Lifespan
IP68 Compliant
Impact Resistant Lens
GORE® Pressure Equalizing Vent
Harness & Switch Included
Mounting Brackets Included
Specifications:
Watts: 47
Amp Draw: 3.21
LED's: 7
Raw Lumens: 5544
Lux @ 10M: 652.41
Beam Distance: 255.4M
Peak Beam Intensity: 65,241 cd
|
292.50 |
|
|
NaviLED 360 Compact All Round White Navigation Lamp - 2nm - Fixed Mount - Black Base
With a compact mounting footprint Hella marine NaviLED 360 Compact lamps feature single LED efficiency, advanced Multivolt™ electronics and precision optics for reliable and highly visible all round lighting.
With less than 1W of consumption, NaviLED 360 Compact lamps draw a fraction of the energy required to run a conventional 2 nautical mile incandescent lamp.
No bulbs, No maintenance. Ultra long service life
Hella marine LED technology has no filaments to break making NaviLED lamps extremely shock and vibration proof for reliability and safety in demanding conditions.
Multivolt™ 9-33V DC
Advanced electronics ensure reliable illumination and lamp protection even under severe voltage fluctuations and low battery voltages. The compact Multivolt™ drive circuitry provides reverse polarity, spike and over-voltage protection for long life and reliable operation.
Safe and highly visible
Hella marine optics deliver 100% correct light output and enhance visibility compared to bulb navigation lamps.
Fully sealed for life. IP 67 Certified
Each NaviLED 360 Compact lamp is a completely sealed unit, highly UV and corrosion resistant. High impact housings ensure durability from waves and impact. NaviLED 360 Compact anchor lamps have undergone extensive ‘tested to destruction’ programs to help lift product reliability to a new standard.
Specifications:
Material Description: UV and impact resistant plastic housing and heavy duty Grilamid lens
Minimum Visible Distance: 2 Nautical Miles (Yacht and Powerboats)
Cable: Pre-wired with 500mm of twin core cable
Operating VoltageMultivolt 9-33V DC
Power Consumption: <1W
Degree of Protection: IP 67 - Completely Sealed
Weight: 90g including cable
Approvals: IMO Col Reg 72, Wheelmark, RCD, USCG, ABYC A-16, Maritime NZ
|
78.98 |
|