|
Accumulator Tank
The use of an accumulator tank is recommended to ensure effective and reliable system function. With an accumulator tank incorporated in the system, the intervals between cut-in and cut-out will be longer when only small amounts of water are drawn off. Less wear and tear on the pump with fewer starts and stops. Pre-pressurized at 0.8 bar / 12 psi.
Volume: 2L/0.5gal
Port connections: 3/4" hose
Height: 315mm/12.4"
Diameter; 160mm/6.3"
Weight: 1.2kg /2.7lbs
|
118.52 |
|
|
Accumulator Tank
The use of an accumulator tank is recommended to ensure effective and reliable system function. With an accumulator tank incorporated in the system, the intervals between cut-in and cut-out will be longer when only small amounts of water are drawn off. Less wear and tear on the pump with fewer starts and stops. Pre-pressurized at 0.8 bar / 12 psi.
Volume: 2L/0.5gal
Port connections: 1/2" hose
Height: 315mm/12.4"
Diameter; 160mm/6.3"
Weight: 1.2kg /2.7lbs
|
118.52 |
|
|
Jabsco 18590-0010 Pump 12V Macerator 1" ID Hose Barb
Pump Body: Plastic Self-Priming Flexible Impeller with Stainless Steel Wearplate.
Port Size: Inlet – 3" Slip-on Hose
Outlet: 1" ID Hose Barb
Flow: 13 GPM at 5 feet of head
Impeller: Nitrile
Shaft Seal: Lip Type
Shaft: Stainless Steel
Motor: 12 Vdc Permanent Magnet Type, Fully Enclosed, with Stainless Steel Shaft.
Macerator: Cast Bronze Cutter reduces particle size to 1/8" maximum.
The Jabsco 18590-series DC macerator pump unit is the ideal solution for emptying holding tanks on recreational vehicles and avoiding dump stations. The macerator section grinds waste down to a particle size of 1/8" maximum so it can easily be pumped through a 1" ID discharge hose. The pump section is self-priming, permitting the unit to be mounted above the tank in a convenient location. Empties most recirculating toilets in less than 2 minutes; empties a typical 30 gallon holding tank in less than 3 minutes.
|
395.99 |
|
|
500 GPH Ultima Combo Automatic Submersible Bilge Pump 12V
Johnson Pump Marine Ultima Combo bilge pumps are JPM's proven Cartridge Bilge Pumps combined with the non-clogging electronic switch Ultima Switch™ for automatic operation. The electronic automatic switch Ultima Switch™ uses the patented Mirus field effect detector cells producing micro-electrical fields that detect disruptions caused by level of water present in the bilge and automatically activates and deactivates the pump.
CE-Approved
Features:
Pre-configured with an electronic Ultima Switch for automatic operation
Capacities 500 GPH, 750 GPH, 1000 GPH and 1250 GPH
Extremely energy efficient
Water-cooled motor for long service intervals
Compact, all-in-one motor/impeller unit with stainless steel (SS2343) shaft
No tools needed for maintenance, no need for complete disassembly. You can now leave the pump casing attached to both the boat and the hoses.
500 GPH, 750 GPH, and 1000 GPH pumps have easy-to-install Dura-Port discharge ports to eliminate stress cracking caused by over-tightened hose clamps
500 GPH, 750 GPH, and 1000 GPH pumps are delivered including both a straight and a 90° smooth elbow Dura-Port as well as a removable check valve
Meets the international standard, ISO 8849 marine
Pump body: Thermoplastic
Shaft seal: Lip seal
Shaft: Stainless steel
Voltage: 12v
Wire size: 16GA
Hose size: 3/4"
Includes Dura-port connection
Specifications
Capacity 3ft (0.9 m) head (13.6V/27.2): 33 l/min - 525 GPH
Capacity straight (13.6V/27.2V): 40 l/min - 630 GPH
Amperage: 2.5 A
Fuse size: 5 A
Connection: 3/4"
Length: 4.41" (112 mm)
Width: 4.25" (108 mm)
Height: 3.35" (85 mm)
Weight: 14.4 oz.
|
71.86 |
|
|
1250 GPH Ultima Combo Automatic Submersible Bilge Pump 12V
Johnson Pump Marine Ultima Combo bilge pumps are JPM's proven Cartridge Bilge Pumps combined with the non-clogging electronic switch Ultima Switch™ for automatic operation. The electronic automatic switch Ultima Switch™ uses the patented Mirus field effect detector cells producing micro-electrical fields that detect disruptions caused by level of water present in the bilge and automatically activates and deactivates the pump.
CE-Approved
Features:
Pre-configured with an electronic Ultima Switch for automatic operation
Capacities 500 GPH, 750 GPH, 1000 GPH and 1250 GPH
Extremely energy efficient
Water-cooled motor for long service intervals
Compact, all-in-one motor/impeller unit with stainless steel (SS2343) shaft
No tools needed for maintenance, no need for complete disassembly. You can now leave the pump casing attached to both the boat and the hoses.
500 GPH, 750 GPH, and 1000 GPH pumps have easy-to-install Dura-Port discharge ports to eliminate stress cracking caused by over-tightened hose clamps
500 GPH, 750 GPH, and 1000 GPH pumps are delivered including both a straight and a 90° smooth elbow Dura-Port as well as a removable check valve
Meets the international standard, ISO 8849 marine
Pump body: Thermoplastic
Shaft seal: Lip seal
Shaft: Stainless steel
Voltage: 12v
Wire size: 16GA
Hose size: 1-1/8"
Does not include Dura-port connection
Specifications
Capacity 3ft (0.9 m) head (13.6V/27.2): 60 l/min - 952 GPH
Capacity straight (13.6V/27.2V): 73 l/min - 1150 GPH
Amperage: 3 A
Fuse size: 5 A
Connection: 1-1/8""
Length: 4.41" (112 mm)
Width: 4.25" (108 mm)
Height: 3.35" (85 mm)
Weight: 16 oz.
|
90.37 |
|
|
Talulah High Flow Ballast Pump - 30 GPM - 12V
With an extraordinary 30GPM rating, the Johnson Pump Talulah HighFlow Ballast Pump represents the industry gold standard of high speed, reliable and efficient reversible ballast pumps. Built with ball bearings, a solid bronze pump head, and built-in thermal protection, this ballast pump is exceptionally durable and built to last. The compact size allows for flexibility in system design without using valuable storage space and without sacrificing the versatile high volume connections unique to the design of the pump head. The Talulah HF also offers run dry protection, the integrated Run-Dry Protection circuit monitors the current draw of the pump and automatically shuts it off if conditions indicate water is no longer flowing through the pump. This innovative feature can help minimize any damage to the new neoprene orange impeller, which itself delivers faster fill/drain times and is more reliable than the previous models. In addition, the ignition protected design makes this pump suitable for installation in the bilge compartment of the boat without risk of fire or explosion due to fuel vapors. Whether for use in a new automated ballast system installation or to upgrade the pumps in an existing system for faster fill and drain times, the Talulah HF 30GPM Ballast Pump delivers the next generation of pump performance in the wakeboarding world.
Features:
Built in Thermal Overheat Protection: Automatic reset after cooling down
Monitor Filling: Tanks must have overfill protection
Retrofit Possible: Important to have full bore hoses – without restriction
Dry Run Impeller*
Intermittent Duty
Important to have good electric installation and proper wire size (Acc. to ISO 10133)
Recommend fresh batteries and engine running (alternator running) to ensure power supply
*Dry Run
|
308.15 |
|
|
Viking Universal Manual Bilge Pump - 38mm
Heavy duty, self-priming, hand-powered bilge pump for nearly any type of installation
Viking Universal's mounting bracket allows for vertical or horizontal surface mounting. With the optional Through Deck kit the pump can be installed behind bulkheads or below the deck. To minimize required space the Viking Universal excels at adaption. The simple switching of the valves together with the connections allows you to choose flow direction. The included KlickTite™ straight and 90° hose connections can be used in combination. The hose connections and even the pump housing can be easily rotated for optimal positioning.
While designed as a powerful bilge pump, the Viking Universal's large 38mm (1-1/2") valves enable the pump to also be used for pumping toilet waste.
Fasteners are included for stowing the handle and the safety clasp ensures that the handle cannot be lost while not in use or during an emergency situation. Viking Universal meets ISO 15083, "Bilge pumping systems".
Specifications:
Body and cover:Polypropylene plastic reinforced with 30% fiberglass
Diaphragm and valves:Nitrile rubber
Wetted parts:PP30GF, PA66 GF30, POM, stainless steel, nitrile rubber
Maximum suction:3M (10')
Maximum head:4M (13')
Combined suction/head:7M (23')
Connection:KlickTite? connectors 38mm (1-1/2") hose. Both straight and 90° bends are included
Max. liquid temp:+60°C (140°F)
Weight:1,5 kg (3.3 lbs)
|
111.11 |
|
|
1.1 GPM WPS Pump - 12V FL2202
Features:
Duty Cycle: Intermittent
Smooth operation
Self Priming and silent running
Low power draw
Runs dry without damage
Easy connecting system 3/8" barb
Do not use pump in a flammable environment
|
67.72 |
|
|
Viking Power 16 - 12V
A modern, single-chamber, self-priming diaphragm pump that can be set up in several different pump/motor configurations. It is easy to install anywhere after the drain outlet in the wastewater system or as a bilge pump in any leisure craft - new or used.
Its non-choke valves mean that no in-line filters are necessary. The pump can be run dry, and it can also handle a mixture of air and water without difficulty. The Viking Power 16 is self-priming up to a height of 3 meters.
With its low pulse and muffled rubber bracket, this pump offers quiet operation. Specifically designed to pump waste water, the Viking Power 16 has been built to last, and engineered for easy maintenance. When it comes time to replace the premium grade reinforced nitrile rubber diaphragm, you can put in a spare without even removing the pump from the system. Delivered with 1" hose and 3/4" hose 1/2" BSP KlickTite™ XL connectors. 90° KlickTite™ XL connectors available as extra accessory.
Capacity, Open Flow:16 l/min - 4.2 GPM
Capacity at 0.1 bar: 15 l/min - 4.0 GPM
Max Lift:3M - 9.8'
Max Head:3M - 9.8'
Connection: KlickTite™ XL connectors for 1" hose or 3/4" hose and 1/2" BSP threads; straight and 90°(optional)
|
210.37 |
|
|
Viking Power 16 - 24V
A modern, single-chamber, self-priming diaphragm pump that can be set up in several different pump/motor configurations. It is easy to install anywhere after the drain outlet in the wastewater system or as a bilge pump in any leisure craft - new or used.
Its non-choke valves mean that no in-line filters are necessary. The pump can be run dry, and it can also handle a mixture of air and water without difficulty. The Viking Power 16 is self-priming up to a height of 3 meters.
With its low pulse and muffled rubber bracket, this pump offers quiet operation. Specifically designed to pump waste water, the Viking Power 16 has been built to last, and engineered for easy maintenance. When it comes time to replace the premium grade reinforced nitrile rubber diaphragm, you can put in a spare without even removing the pump from the system. Delivered with 1" hose and 3/4" hose 1/2" BSP KlickTite™ XL connectors. 90° KlickTite™ XL connectors available as extra accessory.
Capacity, Open Flow:16 l/min - 4.2 GPM
Capacity at 0.1 bar: 15 l/min - 4.0 GPM
Max Lift:3M - 9.8'
Max Head:3M - 9.8'
Connection: KlickTite™ XL connectors for 1" hose or 3/4" hose and 1/2" BSP threads; straight and 90°(optional)
|
237.04 |
|
|
Compact toilet handling and waste water pump Viking Power Vacuum
The Viking Power Vacuum diaphragm pumps have been designed to meet the rigorous demands of the world's leading manufacturers of boats, recreational vehicles and busses. The Viking Power Vacuum has double check-valves and can therefore also be used in vacuum toilet systems. Naturally, pumping ordinary shower or sink drain water or bilge water is no problem for either pump.
Like the Viking Power 16, this new pump has been engineered with a ball-bearing supported transmission for long service life. The pump can not only be run dry, it can also handle a mixture of air and water without difficulty. The Viking Power 32/Vacuum provides maximum flow of 32 liters per minute and is self-priming up to a height 3.5 (Vacuum) meters.
Although powered by an electric motor, this pump can also be cranked by hand in an emergency. The pump has been designed to prevent the leakage of unpleasant odors; and the Viking Power 32/Vacuum can be installed in a variety of different positions. The Viking Power 32/Vacuum is built to last, yet priced competitively.
Features
Maximum flow 32 l/min
Specifically engineered to pump black wastewater
Uncompromising odor-prevention features
Whisper quiet operation
Self-priming
High-impact glass-fiber reinforced nylon body
Ball-bearing supported transmission
Non-choke valves - no waste shredding required
Pump head rotatable 360°
Double check valves on Viking Power Vacuum
Self-priming up to 2.5 meters (8.2 feet)
Can be run dry and can pump air/water mixture
Robust single diaphragm
Electric motor with power-out, manual-crank backup
Complies with ISO 15083 and small craft bilge pump
Standard for vessels above 12 m (39.4 ft)
|
331.85 |
|
|
Automatic Submersible Bilge Pump - Ultima Switch
01674-001
Heavy-Duty, high-performance pump
Exceeds the tough demands of commercial and recreational duty
Liquid Cooled
12-Pole motor with double ball bearings
Lip Seal design construction
Prewired with automatic float switch(with Manual Over-ride Operation)
Optional and removable check valve included
1-1/8" & 1-1/4" hose adapters included
3 year warranty
|
136.30 |
|
|
400 GPH 12V Bilge Pump - Barbed Port
A small, price-wise alternative in the submersible bilge family. The low-cost choice for boat owners who do not want to forsake quality.
Features:
Capacity straight (13.6V/27V): 30 I/min. - 475 GPH
Voltage: 12 V DC
Amperage: 2.5A
Fuse Size: 3 A
Connection: 3/4"
Max height: 100mm - 4"
Weight 0.35kg - 12oz
CE-Approved
Barbed Port
|
24.90 |
|
|
Check Valve for Cartridge Pump
Johnson Pump's black plastic check valve for cartridge pumps.
|
8.06 |
|
|
Aqua Void Auto Bilge Pump Replacement Cartridge Motor - 500 GPH
This replacement cartridge can be used to upgrade the output of a pump or to simply replace an Aqua Series bilge pump.
Features:
500GPH auto replacement motor for Aqua Void Auto Bilge pumps only
Simple, two-handed twist and pull operation to remove and replace the motor cartridge
No tools required
Specifications:
Pump Size: 500 GPH
|
60.00 |
|