|
Enforcer Towable Tube - 2-Rider - Red
Features:
Comfort handles with neoprene knuckle guards
EVA body pads to protect the upper body from abrasion
Boarding assist straps make loading tube from the water easier
Rugged and durable nylon cover
Max. weight – 340 lbs.
60” Deflated size
|
150.76 |
|
|
Wake Shocker Towable Tube - 2 Rider - Red
Features:
Comfort handles with neoprene knuckle guards
EVA body pads to protect the upper and lower body from abrasion
Boarding assist straps make loading tube from the water easier
Rugged and durable nylon cover
Max. weight – 340 lbs.
60” Deflated size
|
129.59 |
|
|
Speeder Towable Tube - 2 Rider - Blue
Features:
Fully covered u-shaped winged towable
Comfort handles with neoprene knuckle guards
Rugged and durable nylon cover
Boarding assist straps make loading tube from the water easier
Max. weight – 340 lbs.
66” x 71” Deflated size
|
199.50 |
|
|
Liquid Life-Calk Sealant Tube - 2.8 FL. Oz. - White
Has same outstanding properties as Life-Calk® Sealant such as long-lasting, permanently flexible, can be sanded, painted*** and used above and below the waterline. Tack-free in 1 to 3 days. Excellent resistance to teak oils, gasoline and diesel fuel. Ideal for teak decks, to bed deck and hull hardware, seal thru-hull fittings, and underwater seams. Will bond to fiberglass, wood, metal, glass, and itself. Cures to a firm flexible rubber seal with excellent waterproofing and adhesion qualities. Can be applied to damp surfaces. Low viscosity, free-flowing polysulfide sealant for use on fine cracks and seams.
*Not compatible with all paints, Sikkens, Cetol, Deks, Olje
WARNING: This product can expose you to chemicals including Toluene which is known to the State of California to cause birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
11.27 |
|
|
Liquid Life-Calk Sealant Tube - 2.8 FL. Oz. - Black
Has same outstanding properties as Life-Calk® Sealant such as long-lasting, permanently flexible, can be sanded, painted*** and used above and below the waterline. Tack-free in 1 to 3 days. Excellent resistance to teak oils, gasoline and diesel fuel. Ideal for teak decks, to bed deck and hull hardware, seal thru-hull fittings, and underwater seams. Will bond to fiberglass, wood, metal, glass, and itself. Cures to a firm flexible rubber seal with excellent waterproofing and adhesion qualities. Can be applied to damp surfaces. Low viscosity, free-flowing polysulfide sealant for use on fine cracks and seams.
*Not compatible with all paints, Sikkens, Cetol, Deks, Olje
WARNING: This product can expose you to chemicals including Toluene which is known to the State of California to cause birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
11.27 |
|
|
LifeSeal® Sealant Tube 2.8 FL. Oz - Clear
A unique combination of marine silicone and polyurethane, formulated especially for fiberglass. LifeSeal® offers a fast-curing, low odor, high adhesion, non-sagging, non-corrosive, non-yellowing formula. It provides a durable permanent watertight seal for joints subject to structural movement. May be used above and below the waterline. Use for sealing decks to hulls, thru-hull fittings, vinyl ports, sealing/glazing windshields and bedding marine hardware. Will adhere to metal, glass, wood, Lexan®, ABS® and certain other materials. Can be removed without damaging gel-coat. Not recommended for ferro cement hulls, impregnated wood or oil-soaked materials. Cures in presence of water. Mildew resistant and acid free.
|
11.90 |
|
|
LifeSeal® Sealant Tube 2.8 FL. Oz - White
A unique combination of marine silicone and polyurethane, formulated especially for fiberglass. LifeSeal® offers a fast-curing, low odor, high adhesion, non-sagging, non-corrosive, non-yellowing formula. It provides a durable permanent watertight seal for joints subject to structural movement. May be used above and below the waterline. Use for sealing decks to hulls, thru-hull fittings, vinyl ports, sealing/glazing windshields and bedding marine hardware. Will adhere to metal, glass, wood, Lexan®, ABS® and certain other materials. Can be removed without damaging gel-coat. Not recommended for ferro cement hulls, impregnated wood or oil-soaked materials. Cures in presence of water. Mildew resistant and acid free.
|
11.90 |
|
|
LifeSeal® Sealant Tube 2.8 FL. Oz - Black
A unique combination of marine silicone and polyurethane, formulated especially for fiberglass. LifeSeal® offers a fast-curing, low odor, high adhesion, non-sagging, non-corrosive, non-yellowing formula. It provides a durable permanent watertight seal for joints subject to structural movement. May be used above and below the waterline. Use for sealing decks to hulls, thru-hull fittings, vinyl ports, sealing/glazing windshields and bedding marine hardware. Will adhere to metal, glass, wood, Lexan®, ABS® and certain other materials. Can be removed without damaging gel-coat. Not recommended for ferro cement hulls, impregnated wood or oil-soaked materials. Cures in presence of water. Mildew resistant and acid free.
|
11.90 |
|
|
Silicone Rubber Tube - 2.8 FL. Oz - Clear
An all-purpose, non-corrosive, non-yellowing, mildew resistant, low-odor, 100% marine high quality silicone sealant. Tack-free in 30 minutes or less. *Fully cured in 24 hours. For use above or below the waterline. Will not shrink, crack, or dry out. Superior flexibility and adhesion to fiberglass, plastic, metal, and wood. Retains flexibility and tensile strength even after years of exposure. Acid free cure will not corrode metal.
|
9.25 |
|
|
Silicone Rubber Tube - 2.8 FL. Oz - White
An all-purpose, non-corrosive, non-yellowing, mildew resistant, low-odor, 100% marine high quality silicone sealant. Tack-free in 30 minutes or less. *Fully cured in 24 hours. For use above or below the waterline. Will not shrink, crack, or dry out. Superior flexibility and adhesion to fiberglass, plastic, metal, and wood. Retains flexibility and tensile strength even after years of exposure. Acid free cure will not corrode metal.
|
9.25 |
|
|
Silicone Rubber Tube - 2.8 FL. Oz - Black
An all-purpose, non-corrosive, non-yellowing, mildew resistant, low-odor, 100% marine high quality silicone sealant. Tack-free in 30 minutes or less. *Fully cured in 24 hours. For use above or below the waterline. Will not shrink, crack, or dry out. Superior flexibility and adhesion to fiberglass, plastic, metal, and wood. Retains flexibility and tensile strength even after years of exposure. Acid free cure will not corrode metal.
|
9.25 |
|
|
Hubbub 2 Towable Tube - 2 Rider - Red
Features:
2-way towing points for multiple riding styles
Tow from the front for a seated secure ride or tow from the rear in kneeling position
10-comfort grab handles
EVA seat pads for kneeling and sitting comfort
Rugged and durable nylon cover
Max. weight – 340 lbs.
65” x 66” Deflated size
|
297.00 |
|
|
Ampco Pumps BI8102721 Impeller Screw
|
308.88 |
|
|
Swivel Base Rod Holder
RH577XL
Vertical 0° Extra Long Tube
Without a doubt, our swivel base rod holder is the Ultimate Rod Holder for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate in the rod holder when side pressure is applied to the tip of the rod. This is an indispensable tool, especially important in Giant Blue Fin Tuna fishing, where reel drags in the neighborhood of 60 pounds are frequently used and can result in tremendous forces being applied to the rod holder pin.
Not only does this make sheared rod holder pins a thing of the past but, more importantly, it allows the tip of the rod to follow the fish. This reduces the possibility of line fraying and enhanced drag as the line streams sideways out of the roller tip instead of over the roller. The rod is also more easily removed from the holder since it is not locked on a rigid pin. The swivel base holder functions as a standard rod holder when used with straight butt rods. Straight butt rods can be manually rotated so that the line remains on the tips roller. The amount of torque required to rotate the swivel is set by adjusting the pressure on two nylon drag washers with a 1/2 inch stainless steel lock nut at the bottom of the rod holder.
|
180.77 |
|
|
Swivel Base Rod Holders
RH579XL
Half Angle 15° Extra Long Tube
Stainless Steel Flush Mount w/ Swivel Base
Without a doubt, our swivel base rod holder is the Ultimate Rod Holder for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate in the rod holder when side pressure is applied to the tip of the rod. This is an indispensable tool, especially important in Giant Blue Fin Tuna fishing, where reel drags in the neighborhood of 60 pounds are frequently used and can result in tremendous forces being applied to the rod holder pin.
Not only does this make sheared rod holder pins a thing of the past but, more importantly, it allows the tip of the rod to follow the fish. This reduces the possibility of line fraying and enhanced drag as the line streams sideways out of the roller tip instead of over the roller. The rod is also more easily removed from the holder since it is not locked on a rigid pin. The swivel base holder functions as a standard rod holder when used with straight butt rods. Straight butt rods can be manually rotated so that the line remains on the tips roller. The amount of torque required to rotate the swivel is set by adjusting the pressure on two nylon drag washers with a 1/2 inch stainless steel lock nut at the bottom of the rod holder.
|
180.77 |
|