|
Universal Ladder Rack Tie-Down System - 2" Retractable Tie-Down - 1 Pair
Ladder rack users can permanently mount the CargoBuckle Ladder Rack Tie-Down System to their truck racks. Valuable equipment is held securely with 7 feet of professional-quality 2′′ web and a strong double J-hook. The strap automatically retracts out of your way when not in use. The Ladder Rack Tie-Down System includes the CargoBuckle Retractable Ratcheting Tie-Down, the ladder rack universal mount adapter, and mounting hardware.
Features:
Complete ladder rack tie-down system for trucks with universal bracket for permanent mounting on square or round racks
7 feet of professional quality webbing and a strong double J-hook to secure your load
Ideal for securing and towing a wide variety of gear — from powersports and automotive to hardware and building materials
Systems are available to accommodate square racks and round ladder racks with the universal mount
Universal mount for both Square or Round rack systems
2″ Break Strength – 2000 lbs. each
2″ Safe Working Load – 677 lbs. each
Includes:
Two retractable ratcheting tie-downs
Universal ladder rack adapter mount and mounting hardware
Specifications:
Weight: 5 kg
Size: 2 in.
Package Size: Includes two tie-downs
|
106.37 |
|
|
BoatBuckle® G2 Retractable Bow Tie-Down
Stainless Steel
Quantity: 1
Dimensions: 2"-43""
Break Strength: 1,500 lbs.
Safe Work Load: 500 lbs
Introducing another industry first... the BoatBuckle® G2 Bow Tie-Down, the only automatically retractable ratcheting tie-down in its category!
This system was designed with three-point trailer tie-down safety in mind and should always be used in conjunction with a good winch strap, along with a transom or gunwale tie-down.
|
74.42 |
|
|
White Nylon Wire Tie Mount
The AT-3 tie mount is smaller for panel and other small space applications. This part is molded in white nylon and is sized for a #3 wire tie with a maximum width of .20". Average pull strength is about 50 lbs. The square base measures .44" wide. Use this smaller wire tie for runs with only a few wires or where space prevents use of our larger tie mounts. Excellent for mounting compass wires on center console boats and for overhead panel runs.
|
13.81 |
|
|
Black Nylon Wire Tie Mount
The AT-3 tie mount is smaller for panel and other small space applications. This part is molded in black nylon and is sized for a #3 wire tie with a maximum width of .20". Average pull strength is about 50 lbs. The square base measures .44" wide. Use this smaller wire tie for runs with only a few wires or where space prevents use of our larger tie mounts. Excellent for mounting compass wires on center console boats and for overhead panel runs.
|
14.18 |
|
|
White Nylon Wire Tie Mount
The AT-3 tie mount is smaller for panel and other small space applications. This part is molded in white nylon and is sized for a #3 wire tie with a maximum width of .20". Average pull strength is about 50 lbs. The square base measures .44" wide. Use this smaller wire tie for runs with only a few wires or where space prevents use of our larger tie mounts. Excellent for mounting compass wires on center console boats and for overhead panel runs.
|
26.17 |
|
|
Black Nylon Wire Tie Mount
The AT-3 tie mount is smaller for panel and other small space applications. This part is molded in black nylon and is sized for a #3 wire tie with a maximum width of .20". Average pull strength is about 50 lbs. The square base measures .44" wide. Use this smaller wire tie for runs with only a few wires or where space prevents use of our larger tie mounts. Excellent for mounting compass wires on center console boats and for overhead panel runs.
|
26.17 |
|
|
Black Nylon Wire Tie Mount
The AT-3 tie mount is smaller for panel and other small space applications. This part is molded in black nylon and is sized for a #3 wire tie with a maximum width of .20". Average pull strength is about 50 lbs. The square base measures .44" wide. Use this smaller wire tie for runs with only a few wires or where space prevents use of our larger tie mounts. Excellent for mounting compass wires on center console boats and for overhead panel runs.
|
42.14 |
|
|
White Nylon Wire Tie Mount
The AT-5 tie mount is designed to be set into wet resin during the hull lay up or bonded with our acrylic adhesives. It's designed for a #5 wire tie and has an average pull strength of 150 lbs. It's approved for submerged bilge applications. Stop putting plywood in your hull just to have a place to drive wire tie screws. Saves material and labor costs!
|
30.00 |
|
|
Black Nylon Wire Tie Mount
The AT-5 tie mount is designed to be set into wet resin during the hull lay up or bonded with our acrylic adhesives. It's designed for a #5 wire tie and has an average pull strength of 150 lbs. It's approved for submerged bilge applications. Stop putting plywood in your hull just to have a place to drive wire tie screws. Saves material and labor costs!
|
51.44 |
|
|
AT-5B Large Black Nylon Wire Tie Mount - Qty. 500
The AT-5 tie mount is designed to be set into wet resin during the hull lay up or bonded with our acrylic adhesives. It's designed for a #5 wire tie and has an average pull strength of 150 lbs. It's approved for submerged bilge applications. Stop putting plywood in your hull just to have a place to drive wire tie screws. Saves material and labor costs!
|
249.73 |
|
|
Mini G3 Retractable Transom Tie-Down System - 1" x 72"
Just hook, ratchet and go! Never look for lost tie-downs again. The Mini G3 Transom tie-down can be permanently mounted with one bolt to most boat trailers. Six feet of one-inch webbing enables you to tie down more equipment in more applications, conveniently and securely.
Features:
Permanent one-bolt installation
Self-retracting web
Anti-corrosive construction
Break Strength 1,400lbs/ea
SWL 466lbs/ea
|
56.50 |
|
|
NXL-M4 Full Range 4 Channel IPX5 Marine Grade Amplifier - 150 x 4W @ 4-Ohm
Designed for intense sessions that keep the party boat rocking all night long; the NXL-M4 is DS18’s high-quality, powerful amplifier for the wave runner looking for a big sound with a small footprint!
As a Class D Digital amplifier, the NXL-M4 uses a direct insert speaker and power terminals significantly smaller than your average amplifier, making it the perfect size for any vehicle’s custom build: but, what it lacks in size it makes up for in power.
The NXL-M4 handles 150W x 4CH @ 4 Ohms; 230W x 4CH @ 2 Ohms; and 440W x 2CH @ 4 Ohms Bridge of RMS Power and 1800W Peak Power.
Get clean, well-defined sound for with enough features (Fully Variable Bass Boost, Low Pass Filter, and High Pass Filter) to tune your music perfectly for optimal audio enjoyment! This full-range amplifier handles all speakers insanely well and has the features to make sure they play the way you want them to!
This amplifier is tough enough to stand up to the worst the waves throw at you! All controls are guarded by high-strength front covers that guarantee impenetrable defense against the elements; coated 4-layer PCB helps prevent corrosion caused by salt water; and Voltage, Thermal, and Short Circuit Protection for easy monitoring of your power levels.
Order the NXL-M4 for insane power out on the water!
Features:
Hardware resistant to corrosion and UV Protection
Coated 4 Layers PCB to prevent corrosion
IPX5 Water Resistance Grade
High Level Input For Radio Use
Front cover to keep the controls safe to the elements
LED Clip Indicator to easier adjustment
Stable and Reliable Class D Circuit Design
Sound Quality Verification Using AP Instruments
Direct Insert Power and Speaker Terminals
Short Circuit, Thermal, and Voltage Protection
Technical Specifications:
Number of Channels - 4
Frequency Response - 20Hz - 20KHz
2 Ohm RMS Power Per Channel - 4 x 230W
4 Ohm RMS Power Per Channel - 4 x 150W
4 Ohm RMS Power Bridge Channel - 2 x 440W
Signal-to-Noise Ratio - >90dB
Product Dimensions: (L x W x H) - 9.6" x 4.5" x 1.7"
*Sold as an Individual
|
479.94 |
|
|
BoatBuckle® G2 Retractable Gunwale Tie-Down
Quantity: 2
Dimensions: 2"-38"
Break Strength: 2,500 lbs./ea
Safe Work Load: 833 lbs
The only one in its class,the BoatBuckle® G2 Gunwale Tie-Down offers the same superior quality as a BoatBuckle® G2 Transom Tie-Down,yet boasts a beefy vinyl-coated double J-hook,designed to fit gunwale rails that measure 2" wide or less.Perfect for aluminum or other narrow gunwale boats.
|
93.23 |
|
|
Retractable Tie Down Straps - 2" Width 6' Dual Hooks
Use Camco retractable Transom tie down straps to safely secure your boat when traveling. Has easy to use hooks on each end and the retractable straps have an easy ratcheting mechanism.
High quality maximum strength tie down straps will support and safely secure boats, motorcycles, atvs, furniture, cargo, equipment, machinery and much more with 2,500 lb break strength and 833 lb working strength.
|
41.11 |
|
|
RAM® Vertical Track Tie Down – 2 Pack
As a pack of two, the RAM® Vertical Track Tie Down system features a T-Bolt and provides an anchor point for use with a track mounting system, allowing you to secure coolers and other accessories to your kayak. Each tie down is designed to work with 1” and 1.5” flat webbing, as well as ropes and bungee cords up to 3/8”. Compatible with all versions of the RAM Tough-Track™.
Material:
High Strength Composite
Note:
The "U" in the part number reflects product packaged in poly bag.
|
13.66 |
|