316 SS Non-Perforated Worm Gear Hose Clamp - 15/32" Band - (3/4" – 1-1/8") Clamping Range - 10-Pack - SAE Size 10 Premium Marine Grade, all AISI 316 (high tensile strength) Stainless Steel “HD NON-PERF” Worm Gear Hose Clamp. The 11.7 mm (0.46”) wide band is Non-Perforated and Smooth on the inside with Rolled Edges. This eliminates hose damage with increased clamping force. The High Strength, Compact, One Piece 16mm (0.63”) wide Housing provides one of the highest clamping force ratings of any worm gear style clamp.   Features: The screw head is 7mm Long service life and safety for most general-purpose hose applications and connections Recommendations: Measure hose O.D. before selecting clamp size for proper fit Double clamp on each hose end for critical applications Consider using our #720 Series wide band 316 SS T-Bolt Clamps for larger I.D. hoses (i.e. Exhaust Hose, etc.) Construction: Band & Housing: 316 Stainless Steel 11.7 mm wide band – 0.9mm thick Screw Drive: 316 Stainless Steel 7.0 mm screw head Specifications: SAE Size: 10 Hose Inner Diameter: (inch) 1/2" – 5/8" Clamping Range: (inch) 3/4" – 1-1/8" / (mm) 19-28 Recommended Torque Inch lbs: 35-45

316 SS Non-Perforated Worm Gear Hose Clamp - 3/8" Band - (3/4" – 1-1/8") Clamping Range - 10-Pack - SAE Size 10 Premium Marine Grade, all AISI 316 (high tensile strength) Stainless Steel Compact “HD NON-PERF” Worm Gear Hose Clamp. The 9.7 mm (0.382”) wide band is Non-Perforated and smooth on the inside with rolled edges. This eliminates hose damage with increased clamping force. The high strength, compact, one-piece 14mm (0.55”) wide housing provides one of the highest clamping force ratings of any worm gear style clamp. Features: The screw head is 7mm Long service life and safety for most general-purpose hose applications and connections Recommendations: Measure hose O.D. before selecting clamp size for proper fit Double clamp on each hose end for critical applications Construction: Band & Housing: 316 Stainless Steel 9.7 mm wide band – 0.8mm thick Screw Drive: 316 Stainless Steel 7.0 mm screw head Specifications: SAE Size: 10 Hose Inner Diameter: (inch) 1/2" – 5/8" Clamping Range: (inch) 3/4" – 1 1/8"  / (mm) 19-28 Recommended Torque Inch lbs: 25-35

Contains 10 each of appropriate size Oetiker clamps for engine type plus standard jaw pincers for installation.

Prop nuts and hardware for BRP-J/E, OMC and Volvo motors. Prop nut kits contain (1) prop nut, (1) cotter pin, and (1) prop spacer.

316 SS Non-Perforated Worm Gear Hose Clamp - 15/32" Band - (7/8" – 1-1/4") Clamping Range - 10-Pack - SAE Size 12 Premium Marine Grade, all AISI 316 (high tensile strength) Stainless Steel “HD NON-PERF” Worm Gear Hose Clamp. The 11.7 mm (0.46”) wide band is Non-Perforated and Smooth on the inside with Rolled Edges. This eliminates hose damage with increased clamping force. The High Strength, Compact, One Piece 16mm (0.63”) wide Housing provides one of the highest clamping force ratings of any worm gear style clamp.   Features: The screw head is 7mm Long service life and safety for most general-purpose hose applications and connections Recommendations: Measure hose O.D. before selecting clamp size for proper fit Double clamp on each hose end for critical applications Consider using our #720 Series wide band 316 SS T-Bolt Clamps for larger I.D. hoses (i.e. Exhaust Hose, etc.) Construction: Band & Housing: 316 Stainless Steel 11.7 mm wide band – 0.9mm thick Screw Drive: 316 Stainless Steel 7.0 mm screw head Specifications: SAE Size: 12 Hose Inner Diameter: (inch) 5/8" – 1-1/8" Clamping Range: (inch) 7/8" – 1-1/4" / (mm) 22-32 Recommended Torque Inch lbs: 35-45

316 SS Non-Perforated Worm Gear Hose Clamp - 15/32" Band - (1-3/4" – 2-1/4") Clamping Range - 10-Pack - SAE Size 28 Premium Marine Grade, all AISI 316 (high tensile strength) Stainless Steel “HD NON-PERF” Worm Gear Hose Clamp. The 11.7 mm (0.46”) wide band is Non-Perforated and Smooth on the inside with Rolled Edges. This eliminates hose damage with increased clamping force. The High Strength, Compact, One Piece 16mm (0.63”) wide Housing provides one of the highest clamping force ratings of any worm gear style clamp.   Features: The screw head is 7mm Long service life and safety for most general-purpose hose applications and connections Recommendations: Measure hose O.D. before selecting clamp size for proper fit Double clamp on each hose end for critical applications Consider using our #720 Series wide band 316 SS T-Bolt Clamps for larger I.D. hoses (i.e. Exhaust Hose, etc.) Construction: Band & Housing: 316 Stainless Steel 11.7 mm wide band – 0.9mm thick Screw Drive: 316 Stainless Steel 7.0 mm screw head Specifications: SAE Size: 28 Hose Inner Diameter: (inch) 1-1/2" - 1-5/8"  Clamping Range: (inch) 1-3/4"– 2-1/4" / (mm) 44-56 Recommended Torque Inch lbs: 45-60

316 SS Non-Perforated Worm Gear Hose Clamp - 3/8" Band - (1-1/2" - 2") Clamping Range - 10-Pack - SAE Size 24 Premium Marine Grade, all AISI 316 (high tensile strength) Stainless Steel “HD NON-PERF” Worm Gear Hose Clamp. The 11.7 mm (0.46”) wide band is Non-Perforated and Smooth on the inside with Rolled Edges. This eliminates hose damage with increased clamping force. The High Strength, Compact, One Piece 16mm (0.63”) wide Housing provides one of the highest clamping force ratings of any worm gear style clamp.   Features: The screw head is 7mm Long service life and safety for most general-purpose hose applications and connections Recommendations: Measure hose O.D. before selecting clamp size for proper fit Double clamp on each hose end for critical applications Consider using our #720 Series wide band 316 SS T-Bolt Clamps for larger I.D. hoses (i.e. Exhaust Hose, etc.) Construction: Band & Housing: 316 Stainless Steel 11.7 mm wide band – 0.9mm thick Screw Drive: 316 Stainless Steel 7.0 mm screw head Specifications: SAE Size: 24 Hose Inner Diameter: (inch) 1-5/16" - 1-3/8" Clamping Range: (inch) 1-1/2" - 2" / (mm) 38-50 Recommended Torque Inch lbs: 35-45

316 SS Non-Perforated Worm Gear Hose Clamp - 3/8" Band - 11/32"-25/32" Clamping Range - 10-Pack - SAE Size 6 Premium Marine Grade, all AISI 316 (high tensile strength) Stainless Steel Compact “HD NON-PERF” Worm Gear Hose Clamp. The 9.7 mm (0.382”) wide band is Non-Perforated and smooth on the inside with rolled edges. This eliminates hose damage with increased clamping force. The high strength, compact, one-piece 14mm (0.55”) wide housing provides one of the highest clamping force ratings of any worm gear style clamp. Features: The screw head is 7mm Long service life and safety for most general-purpose hose applications and connections Recommendations: Measure hose O.D. before selecting clamp size for proper fit Double clamp on each hose end for critical applications Construction: Band & Housing: 316 Stainless Steel 9.7 mm wide band – 0.8mm thick Screw Drive: 316 Stainless Steel 7.0 mm screw head Specifications: SAE Size: 6 Hose Inner Diameter: (inch) 5/16" - 3/8" Clamping Range: (inch) 11/32" – 25/32" / (mm) 13-20 Recommended Torque Inch lbs: 25-35

Sierra replacement bearings for Johnson, Evinrude, BRP, Mercury and Mariner outboard engines.

Sierra replacement bearings for Johnson, Evinrude, BRP, Mercury and Mariner outboard engines.

Thermostat gaskets for Mercury

Fits: 18-40HP

316 SS Non-Perforated Worm Gear Hose Clamp - 15/32" Band - (5/8" – 15/16") Clamping Range - 10-Pack - SAE Size 8 Premium Marine Grade, all AISI 316 (high tensile strength) Stainless Steel “HD NON-PERF” Worm Gear Hose Clamp. The 11.7 mm (0.46”) wide band is Non-Perforated and Smooth on the inside with Rolled Edges. This eliminates hose damage with increased clamping force. The High Strength, Compact, One Piece 16mm (0.63”) wide Housing provides one of the highest clamping force ratings of any worm gear style clamp.   Features: The screw head is 7mm Long service life and safety for most general-purpose hose applications and connections Recommendations: Measure hose O.D. before selecting clamp size for proper fit Double clamp on each hose end for critical applications Consider using our #720 Series wide band 316 SS T-Bolt Clamps for larger I.D. hoses (i.e. Exhaust Hose, etc.) Construction: Band & Housing: 316 Stainless Steel 11.7 mm wide band – 0.9mm thick Screw Drive: 316 Stainless Steel 7.0 mm screw head Specifications: SAE Size: 8 Hose Inner Diameter: (inch) 3/8" – 1/2" Clamping Range: (inch) 5/8" – 15-16" / (mm) 15-24 Recommended Torque Inch lbs: 35-45

316 SS Non-Perforated Worm Gear Hose Clamp - 3/8" Band - 7/16"–21/32" Clamping Range - 10-Pack - SAE Size 4 Premium Marine Grade, all AISI 316 (high tensile strength) Stainless Steel Compact “HD NON-PERF” Worm Gear Hose Clamp. The 9.7 mm (0.382”) wide band is Non-Perforated and smooth on the inside with rolled edges. This eliminates hose damage with increased clamping force. The high strength, compact, one-piece 14mm (0.55”) wide housing provides one of the highest clamping force ratings of any worm gear style clamp. Features: The screw head is 7mm Long service life and safety for most general-purpose hose applications and connections Recommendations: Measure hose O.D. before selecting clamp size for proper fit Double clamp on each hose end for critical applications Construction: Band & Housing: 316 Stainless Steel 9.7 mm wide band – 0.8mm thick Screw Drive: 316 Stainless Steel 7.0 mm screw head Specifications: SAE Size: 4 Hose Inner Diameter: (inch) 1/4" – 5/16" Clamping Range: (inch) 7/16" – 21/32"  / (mm) 11-17 Recommended Torque Inch lbs: 25-35

316 SS Non-Perforated Worm Gear Hose Clamp - 3/8" Band - 5/8"–15/16" Clamping Range - 10-Pack - SAE Size 8 Premium Marine Grade, all AISI 316 (high tensile strength) Stainless Steel Compact “HD NON-PERF” Worm Gear Hose Clamp. The 9.7 mm (0.382”) wide band is Non-Perforated and smooth on the inside with rolled edges. This eliminates hose damage with increased clamping force. The high strength, compact, one-piece 14mm (0.55”) wide housing provides one of the highest clamping force ratings of any worm gear style clamp. Features: The screw head is 7mm Long service life and safety for most general-purpose hose applications and connections Recommendations: Measure hose O.D. before selecting clamp size for proper fit Double clamp on each hose end for critical applications Construction: Band & Housing: 316 Stainless Steel 9.7 mm wide band – 0.8mm thick Screw Drive: 316 Stainless Steel 7.0 mm screw head Specifications: SAE Size: 8 Hose Inner Diameter: (inch) 3/8" – 1/2" Clamping Range: (inch) 5/8" – 15/16"  / (mm) 15-24 Recommended Torque Inch lbs: 25-35