|
Premium Replacement Ignition Coil for Johnson/Evinrude Outboard Engines 1972-2006
This ignition coil fits 1972-2006, Universal Replacement Kit, Carbureted 2 Stroke Engines, 1 per Cyl.
Replaces:
Johnson / Evinrude Ignition Coil 584561
Johnson / Evinrude Ignition Coil 582106
Johnson / Evinrude Ignition Coil 583737
Johnson / Evinrude Ignition Coil 582366
Johnson / Evinrude Ignition Coil 581861
Johnson / Evinrude Ignition Coil 581862
Johnson / Evinrude Ignition Coil 581686
Johnson / Evinrude Ignition Coil 581997
Johnson / Evinrude Ignition Coil 582330
Johnson / Evinrude Ignition Coil 581998
Johnson / Evinrude Ignition Coil 581685
Johnson / Evinrude Ignition Coil 581819
Johnson / Evinrude Ignition Coil 582062
Johnson / Evinrude Ignition Coil 582062
SIERRA Ignition Coil 18-5176
*ARCO Assurance 12-month part and labor warranty protection
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
21.59 |
|
|
Premium Replacement Ignition Coil for Johnson/Evinrude Outboard Engines 1985-2006
This ignition coil fits 1985-2006 (2.5-55HP – 2 Cyl.), 1995 (50HP – 3 Cyl.), 1995-2006 (80-115HP – 4 Cyl.), and 1991-2006 (105-175HP – 6 Cyl.) Johnson/Evinrude engines.
Replaces:
Johnson / Evinrude Ignition Coil 583740
Johnson / Evinrude Ignition Coil 583298
Johnson / Evinrude Ignition Coil 583040
Johnson / Evinrude Ignition Coil 777664
SIERRA Ignition Coil 18-5170
CDI Electronics Ignition Coil 183-3740
*ARCO Assurance 12-month part and labor warranty protection
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
23.99 |
|
|
Johnson/Evinrude Outboard Starter - Late Model
The outboard starter that will fit BRP-OMC 1991-Up, 150-175 HP V6 Eagle-Series, 1997-Up V4, and V6 2003 75/90/115 HP, 2003-UP 90/105/115 60o Engine, 2004-UP 100-175 HP Direct Injection.
ARCO advises using a fully charged battery - A weak battery can damage the starter and starter solenoid. And to also clean all connections - A corroded connection creates resistance, lowering the amperage required for an efficient starting circuit.
Features:
Dynamically tested and packaged for out-of-the-box performance
Nickel-coated and epoxy-painted to reduce corrosion
Sealed to minimize water intrusion
Designed for long life and optimum performance
Armatures are tested to withstand 50 times operating voltages (12 volts)
Warranty Information:
When properly installed, all ARCO products are warrantied against defects in materials and workmanship for a period of 12 months for leisure use and 90 days for commercial or racing applications.
Add an extra year of warranty to your rotating electric ARCO product (Tilt/Trim Motors, Alternators, Outboard Starters, and Inboard Starters) when you register your product within 30 days of purchase. You can register your product by visiting arcomarine.com/product-registration
Replaces:
Johnson/ Evinrude 432925
Johnson/ Evinrude 438878
Johnson/ Evinrude 586286
Johnson/ Evinrude 586287
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
128.65 |
|
|
Johnson/Evinrude Fuel Line Kit - 3/8" Diameter x 6' Length
This EPA-certified Attwood Johnson/Evinrude Fuel Line Kit reliably delivers fuel to your Johnson or Evinrude engine and provides the ultimate in performance, safety, and value. The kit includes a 6-foot-long, 3/8-inch diameter low-permeation fuel line that is designed to prevent kinking and hardening, and is rated up to 100 degrees C.
Features:
These Attwood Fittings Are Included: Tank fitting 8838TM6, tank end hose fitting 8838HF6, and engine end hose fitting 8889LP6
Hose and tank fittings come with pre-applied thread sealant
There’s also a multi-layer, low-permeation primer bulb with connections engineered for strength, durability, and leak resistance
For Johnson/Evinrude engines and tanks
This Fuel Line Kit is compatible with Ethanol blended fuels and with all OEM-brand engines
*No Fuel Demand Valve in this kit
|
46.14 |
|
|
Johnson/Evinrude Fuel Line Kit - 3/8" Diameter x 6' Length with Fuel Demand Valve
This EPA-certified Attwood Johnson/Evinrude Fuel Line Kit reliably delivers fuel to your Johnson or Evinrude engine and provides the ultimate in performance, safety, and value. The kit comes with a 6-foot-long, 3/8-inch diameter low-permeation fuel line that is designed to prevent kinking and hardening, and is rated up to 100 degrees C. Also, the kit includes a multi-layer low-permeation primer bulb and a Fuel Demand Value that eliminates engine flooding and spillage by preventing pressurized fuel from reaching the engine.
Features:
These Attwood Fittings Are Included: Tank fitting 8838TM6, tank end hose fitting 8838HF6, and engine end hose fitting 8889LP6
In-Line Fuel Demand Valve
Hose and tank fittings come with pre-applied thread sealant
Reliably delivers fuel to your Johnson or Evinrude engine
*This Fuel Line Kit is compatible with Ethanol blended fuels and with all OEM-brand engines
|
69.84 |
|
|
Magnesium Anode for 12 and 20-Gallon Water Heater
Raritan's Magnesium Anode is made specifically for Raritan's 12 and 20-Gallon Water Heater.
Features:
16-1/8"
Stainless Steel Fitting
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
52.31 |
|
|
Johnson/Evinrude Fuel Line Kit - 3/8" Diameter x 6' Length (No Tank Fitting)
This Attwood Fuel Line Kit is a reliable replacement for the original equipment on Johnson and Evinrude engines and tanks. This kit includes a 6-foot-long, 3/8-In. diameter fuel line and a multi-layer, low-permeation primer bulb.
Features:
These Attwood Hose Fittings Are Included: Two (2) 8889LP6 hose fittings for the tank end and for the engine end
For Johnson/Evinrude engines and tanks
*No Fuel Demand Valve or Tank Fitting is included in this kit
|
48.43 |
|
|
Seaward Magnesium Anode
Fits all Seaward by Whale water heaters.
Features:
Material: Magnesium
Length: 4"
Thread: 3/4" pipe
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
25.57 |
|
|
Magnesium Anode 200mm for Water Heater
Quick OSP Boiler Magnesium Anode 200mm.
Features:
Magnesium Anode
200mm
Used with water heaters
|
24.40 |
|
|
Chesapeake White SS 4" Tachometer w/Systemcheck Indicator - 7000 RPM (Gas - Johnson/Evinrude Outboard)
Perimeter-lighted White dial with stylish Blue and White graphics, polished stainless steel bezel, contoured White pointer and domed glass lens.
Tachometers work by counting pulses generated by the ignition system, alternator, tach signal generator or magnetic pickup sender. The tach is hooked up to +12VDC, Ground and one of the signal sources listed.
By selecting the right tach and setting the switch on the back to the correct position you let the tachometer know how many pulses are sent per each engine revolution.
These tachometers have a warning light system built into the dial that show off warning indicators when a fault is detected from the engine.
SystemCheck Warnings:
No Oil
Engine Overheat
Check Engine
Low Oil
4" - Hole size: 3.375" (85mm)
For Engine Types:
Johnson/Evinrude Outboard
Specifications:
Anti-scratch glass lens
Plastic Cases for corrosion resistance and long life
12 VDC negative ground
Can be adapted for 24 VDC systems
Factory P/N TC9881
*Sold as an Individual
**Gauge Cover not Included
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
202.38 |
|
|
Euro Black 2" Trim Gauge f/ Johnson/Evinrude/Suzuki Outboard
Perimeter-lighted Black dial with bold White graphics, Black aluminum bezel, contoured White pointer and flat glass lens.
2"- Hole Size: 2.0625" (53mm)
For Engine Types:
Johnson/Evinrude/Suzuki Outboards
Specifications:
Anti-scratch glass lens
12 VDC negative ground
Perimeter-lighted Black dial
Can be adapted for 24 VDC systems
Factory P/N GP9305
*Sold as an Individual
**Gauge Cover not Included
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
25.80 |
|
|
2" Trim Gauge f/Johnson, Evinrude & Suzuki Outboards
Faria Beede’s Platinum Series Instruments feature spun aluminum gauge dials with custom graphics and a polished stainless steel bezel providing a rugged, elegant look.
All Platinum Series gauges feature Faria's revolutionary domed glass Fog-Resistant lens. These lenses shed condensation and resists scratching and other types of fouling common in the marine environment.
2"- Hole Size: 2.0625" (53mm)
For Engine Types:
Johnson, Evinrude & Suzuki Outboards
Specifications:
Domed Glass Anti-fog, Scratch Resistant Lens
Stainless Steel Bezel
Blue LED Illuminating around the Perimeter of the Dial
Illuminated Backlit Fire-Orange Tip Pointer
Factory P/N GP5087
*Sold as an Individual
*Gauge Cover not Included
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
45.59 |
|
|
Johnson/Evinrude Outboard Relay - 12V 30A
Johnson/Evinrude outboard relay that will fit BRP-OMC.
Replaces:
BRP-OMC 582195
BRP-OMC 582472
BRP-OMC 582473
BRP-OMC 584416
BRP-OMC 586147
BRP-OMC 586244
BRP-OMC 3857533
BRP-OMC 586224
SIERRA 18-5705
*ARCO Assurance 12-month part and labor warranty protection
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
16.46 |
|
|
Johnson/Evinrude/OMC (Outboard Marine Corporation) Male Tank Fitting - 1/4" NPT
This Attwood male tank fitting is suitable for use with leaded, unleaded, ethanol-blended, and alcohol-blended fuels. The threaded fitting has a 1/4" male NPT thread and uses thread sealant on all threads. Clamps are not included.
Features:
Johnson, Evinrude, and OMC fitting
Quick-connect ¼-inch male thread makes installation easy
Solid machined brass for dependable performance, peace of mind
*Specifically mates to Attwood part numbers: 8889LP6 & 88FHE516-6
|
7.40 |
|
|
Johnson/Evinrude/OMC (Outboard Marine Corporation) Female Hose Fitting - Tank Or Engine End - 5/16" Barb
For use on both ends of the fuel line to connect tank fitting and motor. The hose barb fits a 5/16" inner diameter hose.
Features:
Johnson, Evinrude, and OMC fitting
Tank or Engine End
Material Construction: Acetal
*Specifically mates to Attwood part number: 8883-6
|
5.69 |
|