|
Jabsco Mini Puppy Bilge/Utility 12V
FEATURES
Pump Body:
Brass
Port Size:
25.4mm (1") ID Hose or 3/8" BSP / NPT pipe
Flow:
6 lpm (1.3 UK gpm) output @ 2m (6.6ft) head.
Impeller:
Nitrile
Shaft Seal:
Lip Type
Shaft:
Stainless Steel
Motor:
ISO 8846 MARINE (Ignition protection). ISO 8849 MARINE (Bilge pump standard).
APPLICATIONS / CHARACTERISTICS
Continuous rated, medium duty pumps for bilge and general purpose use. Small bilge debris present no problem to these brass bodied, flexible impeller pumps. Simple design means fewer wearing parts. Self priming to 1.5m (5 ft).
Jabsco Mini Puppy Bilge/Utility 12V 1.4GPM
|
399.57 |
|
|
Jabsco Mini Puppy 24V Bilge/Utility
FEATURES
Pump Body:
Brass
Port Size:
25.4mm (1") ID Hose or 3/8" BSP / NPT pipe
Flow:
6 lpm (1.3 UK gpm) output @ 2m (6.6ft) head.
Impeller:
Nitrile
Shaft Seal:
Lip Type
Shaft:
Stainless Steel
Motor:
ISO 8846 MARINE (Ignition protection). ISO 8849 MARINE (Bilge pump standard).
APPLICATIONS / CHARACTERISTICS
Continuous rated, medium duty pumps for bilge and general purpose use. Small bilge debris present no problem to these brass bodied, flexible impeller pumps. Simple design means fewer wearing parts. Self priming to 1.5m (5 ft
Jabsco Mini Puppy Bilge/Utility 24V 1.4GPM
|
399.57 |
|
|
Jabsco 23670 Series Junior Puppy Flexible Impeller Pump
FEATURES
Pump Body:
Bronze
Port Size:
3/8"BSP Threads or 3/4" (19mm) ID Hose.
Flow:
15.5 Litres/min (3.4 USgallons/min)
Impeller:
Nitrile
Shaft Seal:
Lip Type
Shaft:
Stainless Steel
Motor:
Continuous duty 12V or 24V. Motor meets ISO 8846 MARINE (Ignition protection) and ISO 8849 MARINE (Bilge pump standard).
APPLICATIONS / CHARACTERISTICS
Continuous rated, medium duty flexible impeller pumps for bilge and general purpose use.
Self Priming to 8 feet (2.5m).
Small bilge debris present no problem to these bronze bodied, flexible impeller pumps. Simple design means fewer wearing parts. Use for bilge pumping, livewell circulation, washdown and general pumping requirements
Jabsco Junior Puppy Flexible Impeller Pump 12Volt, 3.4GPM, 3/8" British Standard Pipe Threads or 3/4" Hose Ports, Nitrile Impeller
|
521.94 |
|
|
Jabsco 12V Mini Puppy
FEATURES
Pump Body:
Bronze
Port Size:
3/8" Pipe Thread Internal Plus an adaptor for 3/4" garden hose thread.
Flow:
1.8 GPM at 5 feet of head.
Pressure:
Up to 13 PSI at 30 feet of head.
Impeller:
Neoprene or Nitrile
Shaft Seal:
Lip Type
Shaft:
Stainless Steel
Motor:
Permanent Magnet Type, Fully enclosed. Motor meets USCG Electrical Standards (Title 33, Chapter 1, Part 183; Subpart 1) for IGNITION PROTECTION on gasoline powered vessels.
APPLICATIONS / CHARACTERISTICS
Use for bilge pumping, livewell circulation, washdown and general pumping requirements. When bilge water contains significant amounts of oil, use Nitrile version with impeller No. 14750-0003-P. For intermittent duty, motor may be reversed. With a wet impeller, pump will produce a suction lift of about 4 feet (1, 2m) and a lift to 15 feet (5m) when primed.
Jabsco Mini Puppy 12V 3/8"NPT And Garden Hose Adaptor Neoprene Impeller
|
279.38 |
|
|
Jabsco 12V Mini Puppy
FEATURES
Pump Body:
Bronze
Port Size:
3/8" Pipe Thread Internal Plus an adaptor for 3/4" garden hose thread.
Flow:
1.8 GPM at 5 feet of head.
Pressure:
Up to 13 PSI at 30 feet of head.
Impeller:
Neoprene or Nitrile
Shaft Seal:
Lip Type
Shaft:
Stainless Steel
Motor:
Permanent Magnet Type, Fully enclosed. Motor meets USCG Electrical Standards (Title 33, Chapter 1, Part 183; Subpart 1) for IGNITION PROTECTION on gasoline powered vessels.
APPLICATIONS / CHARACTERISTICS
Use for bilge pumping, livewell circulation, washdown and general pumping requirements. When bilge water contains significant amounts of oil, use Nitrile version with impeller No. 14750-0003-P. For intermittent duty, motor may be reversed. With a wet impeller, pump will produce a suction lift of about 4 feet (1, 2m) and a lift to 15 feet (5m) when primed.
Jabsco Mini Puppy 12V 3/8"NPT And Garden Hose Adaptor Nitrile Impeller
|
339.13 |
|
|
Ultra Safety Systems Ultimate Mini Bilge Switch 12V
ULTRA PUMP SWITCH MINI
4 inch high, 1 3/4 inch diameter, 3/4 inch ON/OFF differential
12 Volts/40 Amp relay
20 Amp continues pump load
With Magnetic Test Switch
5 year warranty
|
204.75 |
|
|
Jabsco Junior Puppy 24V Flexible Impeller Pump
FEATURES
Pump Body:
Bronze
Port Size:
3/8"BSP Threads or 3/4" (19mm) ID Hose.
Flow:
15.5 Litres/min (3.4 USgallons/min)
Impeller:
Nitrile
Shaft Seal:
Lip Type
Shaft:
Stainless Steel
Motor:
Continuous duty 12V or 24V. Motor meets ISO 8846 MARINE (Ignition protection) and ISO 8849 MARINE (Bilge pump standard).
APPLICATIONS / CHARACTERISTICS
Continuous rated, medium duty flexible impeller pumps for bilge and general purpose use.
Self Priming to 8 feet (2.5m).
Small bilge debris present no problem to these bronze bodied, flexible impeller pumps. Simple design means fewer wearing parts. Use for bilge pumping, livewell circulation, washdown and general pumping requirements
Jabsco Junior Puppy Flexible Impeller Pump 24Volt, 3.4GPM, 3/8" British Standard Pipe Threads or 3/4" Hose Ports, Nitrile Impeller
|
363.45 |
|
|
500GPH Standard Bilge Pump - 12V
Customers talk about flow, they want the water out of the bilge, and
fast. Improved design and performance means that our next generation 500GPH pump will produce this flow at just 12V rather than 13.6V as previously required...more typical of on board voltage supply.
Our next generation of Rule pumps include check valves and to do this, we've created hidden air vent to prevent airlocking. Under each strainer tab there is a small hole that vents any air trapped in the pump housing preventing airlocks...and that's how we do it.
We have true electromagnetic suppression (EMC). We have a built-in thermal cell that protects the pump and the vessel when things get too hot.
We've re-engineered the inside and outside of our bilge pumps, starting with a blank slate. And we're just getting started
Features:
Non-automatic - used with a panel switch or Rule float switch
Submersible and Ignition Protected
High efficiency, low amp motor
Stainless-steel shaft
Includes backflow preventer
WARNING: This product can expose you to chemicals including 1,3-Butadiene which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
31.27 |
|
|
800GPH Standard Bilge Pump - 12V
Customers talk about flow, they want the water out of the bilge, and
fast. Improved design and performance means that our next generation 800GPH pump will produce this flow at just 12V rather than 13.6V as previously required...more typical of on board voltage supply.
Our next generation of Rule pumps include check valves and to do this, we've created hidden air vent to prevent airlocking. Under each strainer tab there is a small hole that vents any air trapped in the pump housing preventing airlocks...and that's how we do it.
We have true electromagnetic suppression (EMC). We have a built-in thermal cell that protects the pump and the vessel when things get too hot.
We've re-engineered the inside and outside of our bilge pumps, starting with a blank slate. And we're just getting started
Features:
Non-automatic - used with a panel switch or Rule float switch
Submersible and Ignition Protected
High efficiency, low amp motor
Stainless-steel shaft
Includes backflow preventer
WARNING: This product can expose you to chemicals including 1,3-Butadiene which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
48.76 |
|
|
1100GPH Standard Bilge Pump - 12V
Customers talk about flow, they want the water out of the bilge, and
fast. Improved design and performance means that our next generation 1100GPH pump will produce this flow at just 12V rather than 13.6V as previously required...more typical of on board voltage supply.
Our next generation of Rule pumps include check valves and to do this, we've created hidden air vent to prevent airlocking. Under each strainer tab there is a small hole that vents any air trapped in the pump housing preventing airlocks...and that's how we do it.
We have true electromagnetic suppression (EMC). We have a built-in thermal cell that protects the pump and the vessel when things get too hot.
We've re-engineered the inside and outside of our bilge pumps, starting with a blank slate. And we're just getting started
Features:
Non-automatic - used with a panel switch or Rule float switch
Submersible and Ignition Protected
High efficiency, low amp motor
Stainless-steel shaft
Includes backflow preventer
WARNING: This product can expose you to chemicals including 1,3-Butadiene which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
55.51 |
|
|
Jabsco 59400-0012 Hydro Air Bilge Switch 12V
|
87.10 |
|
|
Jabsco 51020-8411 020 Utility Pump
|
683.81 |
|
|
Ultra Safety Systems US Ultimate JR Bilge Switch 12V
ULTRA PUMPSWITCH JR
Automatic bilge pump switch.
6 1/4 inch high and 2 1/2 inch diameter (1 1/4 inch ON/OFF differential).
12 Volts at 15 Amps
5 year warranty
|
195.00 |
|
|
Aqua Void 500 GPH Bilge Pump - 12V
With its industry-first quick-change motor connection and new reinforced click-in basket, this bilge pump simplifies cleaning and installation, and it's convenient and efficient. Its enhanced motor ensures reliability and performance in any condition. Experience worry-free boating with Aqua Void.
Experience the Industry-First Quick-Change Motor Connection
Johnson Pump's groundbreaking product features a quick-change motor connection for hassle-free cartridge motor changes or capacity upgrades.
Take Control of the Boating Experience with Unparalleled Convenience
The Aqua Void Cartridge Bilge Pump is designed with single-handed access, perfect for tight bilge spaces. The pump body is easy to install or remove, and an innovative reinforced click-in basket simplifies installation, cleaning, or inspection.
Enjoy Enhanced Efficiency and Higher Flow Rate
Powered by an enhanced motor and high-flow impeller, the Aqua Void achieves increased efficiency and a higher flow rate while conserving energy consumption.
Trust in Reliable Performance Under Demanding Conditions
Johnson Pump Marine is renowned for its industry-leading reliability. The Aqua Void lives up to this reputation with its robust construction and meticulous engineering.
Enjoy a worry-free time on the water and experience Reliability On Board. The Aqua Void Bilge Pump is a game-changing solution that sets a new standard in bilge pumps. Don't miss this opportunity to enhance the boating experience. Get the Aqua Void today!
Features:
Heightened efficiency with an increased flow rate - high-flow impeller design
Quick-change motor connection enjoys quick and hassle-free cartridge motor changes or capacity upgrades. Industry-first and only cartridge motor pump with included harness connection requiring no cutting and splicing of wires
Water-cooled motor for long service intervals
Compact, all-in-one motor/Impeller unit with stainless steel (316) Shaft
No tools are needed for maintenance, no need for complete disassembly. You can now leave the pump casing attached to both the boat and the hoses.
Easy-to-install dura-port discharge ports to eliminate stress cracking caused by over-tightened hose clamps
Include both a straight and a 90-degree smooth elbow dura-port as well as a removable check valve
Meets the international standard, ISO 8849 marine
Molded T-Slot - Easy Installation with Switches
Specifications:
Pump Size: 500 GPH
Capacity Straight (12V): 600 GPH (38 I/min)
Voltage: 12V
Amp: 2.7A
Fuse: 3.5A
Hose Connection: 3/4 in.
Wire Size: 16 GA, TAC
Weight: 11.2 oz (0.32 kg)
Body: ABS
Dura Port: PA66/GF - Nylon
Shaft: 316 Stainless Steel
Shaft Seal: Nitrile Rubber
Motor Cartridge: PC-ABS
Pump Dimensions (W x H x L): 2.75 x 4.69 x 5.24 inches (70 x 119 x 133 mm)
|
28.44 |
|
|
Aqua Void 800 GPH Bilge Pump - 12V
With its industry-first quick-change motor connection and new reinforced click-in basket, this bilge pump simplifies cleaning and installation, and it's convenient and efficient. Its enhanced motor ensures reliability and performance in any condition. Experience worry-free boating with Aqua Void.
Experience the Industry-First Quick-Change Motor Connection
Johnson Pump's groundbreaking product features a quick-change motor connection for hassle-free cartridge motor changes or capacity upgrades.
Take Control of the Boating Experience with Unparalleled Convenience
The Aqua Void Cartridge Bilge Pump is designed with single-handed access, perfect for tight bilge spaces. The pump body is easy to install or remove, and an innovative reinforced click-in basket simplifies installation, cleaning, or inspection.
Enjoy Enhanced Efficiency and Higher Flow Rate
Powered by an enhanced motor and high-flow impeller, the Aqua Void achieves increased efficiency and a higher flow rate while conserving energy consumption.
Trust in Reliable Performance Under Demanding Conditions
Johnson Pump Marine is renowned for its industry-leading reliability. The Aqua Void lives up to this reputation with its robust construction and meticulous engineering.
Enjoy a worry-free time on the water and experience Reliability On Board. The Aqua Void Bilge Pump is a game-changing solution that sets a new standard in bilge pumps. Don't miss this opportunity to enhance the boating experience. Get the Aqua Void today!
Features:
Heightened efficiency with an increased flow rate - high-flow impeller design
Quick-change motor connection enjoys quick and hassle-free cartridge motor changes or capacity upgrades. Industry-first and only cartridge motor pump with included harness connection requiring no cutting and splicing of wires
Water-cooled motor for long service intervals
Compact, all-in-one motor/Impeller unit with stainless steel (316) Shaft
No tools are needed for maintenance, no need for complete disassembly. You can now leave the pump casing attached to both the boat and the hoses.
Easy-to-install dura-port discharge ports to eliminate stress cracking caused by over-tightened hose clamps
Include both a straight and a 90-degree smooth elbow dura-port as well as a removable check valve
Meets the international standard, ISO 8849 marine
Molded T-Slot - Easy Installation with Switches
Specifications:
Pump Size: 800 GPH
Capacity Straight (12V): 795 GPH (50 I/min)
Voltage: 12V
Amp: 3.7A
Fuse: 5A
Hose Connection: 3/4 in.
Wire Size: 16 GA, TAC
Weight: 12.6 oz (0.36 kg)
Body: ABS
Dura Port: PA66/GF - Nylon
Shaft: 316 Stainless Steel
Shaft Seal: Nitrile Rubber
Motor Cartridge: PC-ABS
Pump Dimensions (W x H x L): 2.75 x 4.69 x 5.24 inches (70 x 119 x 133 mm)
|
37.44 |
|