Hypro 9303S-HM1C Centrifugal Pump w/Hyd Motor 114 gpm, 130 psi. Max Hydraulic 13 gpm. For Open/Closed Systems 1-1/2" NPT inlet, 1-1/4" NPT outlet.   Hypro 9303S-HM1C Centrifugal Pump.   Hypro centrifugal pumps are designed for agricultural and industrial spraying and transfer of a variety of fluids: water, insecticides, herbicides, wettable powders, emulsives, liquid fertilizers, etc.   Hypro Series 9300 hydraulic motor-driven centrifugal pumps provide smooth performance. They can be conveniently mounted on the tractor or sprayer, becoming part of the vehicle’s hydraulic system and freeing the PTO for other uses. The Hypro “close-coupled” design reduces the mounting space required, eliminating long shafts and couplers between the pump and motor.   The broad, versatile line includes models with rugged housings of cast iron and stainless steel that stand up to strong chemical herbicides. Stainless steel pumps are ideal for use with Roundup® or other acid applications.   The series includes models 9303C-HM1C, 9303S-HM1C, 9303C-HM2C, 9303S-HM2C, 9303C-HM3C, 9303S-HM3C, 9303C-HM4C, 9303S-HM4C, 9303C-HM5C, and 9303S-HM5C.

Hypro 3430-0332, Kit For 9303   Seal and O-Ring Repair Kit   Fits the following pumps:   9202C, 9202S, 9202S-R, 9203C, 9203C-R, 9203S, 9203S-R, 9203C-SP, 9203C-R-SP, 9203S-SP, 9206C, 9206S, 9262C-C, 9262S-C, 926S-CR, 926C-CR-SP, 9263C-CR-SP-B, 9263C-C-SP, 9263S-C-SP, 9263C-C, 9263C-CR, 9263S-C, 9263S-CR   Hydrulic Driven:   9302CT-GM1, 9302C-HM1C, 9302C-HM2C, 9302C-HM4C, 9302ST-GM1, 9302S-HM1C, 9302S-HM2C, 9302S-HM4C, 9303C-HM1C, 9303C-HM2C, 9303C-HM3C, 9303C-HM4C, 9303C-HM5C, 9303S-HM1C, 9303S-HM2C, 9303S-HM3C, 9303S-HM4C, 9303S-HM5C, 9306C-HM1C, 9306C-HM3C, 9306C-HM5C, 9306S-HM1C, 9306S-HM3C, 9306S-HM5C, 9306C-HM1C-3U, 9306C-HM3C-3U, 9306C-HM5C-3U, 9306S-HM1C-3U, 9306S-HM3C-3U, 9306S-HM5C-3U   Belt Driven:   9403C-540-SP, 9403C-540Q-SP, 9403C-540S-SP, 9403C-1000-SP, 9403C-1000L-SP, 9402C-540, 9402C-540Q, 9402C-540S, 9402C-1000, 9402C-1000L, 9402C-1000S, 9403C-540, 9403C-540Q, 9403C-540S, 9403C-1000, 9403C-1000-MTZ, 9403C-1000S, 9403S-540, 9403S-540Q, 9403P-540S, 9403P-1000, 9403P-1000L, 9403P-1000S   Gas Driven:   1521C-65, 1521C-65M, 1538, 1522C-65SP, 1538-SP, 1536, 1539, 1537, 1540, 1536-SP, 1539-SP, 1538-SP, 1537-SP, 1540-SP  

Hypro 9203P-S, Polypropylene Centrifugal Pump 1-1/2" NPT Inlet, 1-1/4" NPT Outlet. 7/8" Solid, 316 Stainless Steel Shaft. CCW Rotation 100 gpm, 82 psi.   Hypro centrifugal pumps handle big, high-capacity spraying jobs with ease. Use them for spraying liquid fertilizers and other chemicals, including wettable powder slurries for weed control. Make short work of other jobs - filling nurse tanks, watering seed beds, and transferring liquids.   The broad, versatile line includes models with rugged housings of polypropylene that stand up to strong chemical herbicides. Polypropylene pumps are lightweight and provide excellent resistance to corrosive chemicals.

Primetime Hydraulic Pump This is a high performance self-priming 316 stainless steel centrifugal pump close coupled to a hydraulic motor.   The pump is ideal for Marine, Agricultural, and Industrial applications where suction lift is required.   The Primetime Hydraulic model features all 316 stainless steel components for superior corrosion resistance when pumping chemical compounds. A carbon/ceramic/viton bellows shaft seal is standard. Ports are ¾” NPT with a 1/8" NPT fill port. The check valve flapper design enhances the self-priming capability to 12 foot suction lift.   The hydraulic motor is designed with SAE #6 ports for the tank side while the pressure side has SAE # 4 ports. Maximum Pressure is 1000 PSI. Maximum Oil Flow is 3 GPM.   SPECIFICATIONS: Flow. . . . . . . . . . . . . . . . . . Up to 31 gpm Head . . . . . . . . . . . . . . . . . Up to 51’  Housing. . . . . . . . . . . . .... . 316 Stainless  Steel (Investment Cast) Cover . . . . . . . . . . . . . .... . 316 Stainless Steel (Investment Cast) Impeller . . . . . . . . . . .... . . 316 Stainless Steel Semi-Open (Sintered PM) Wear Plate . . . .  . . .. . ... . . 316 Stainless Steel Mechanical Seal . . . .. .. .. . . Carbon/Ceramic/Viton Bellows 150 PSI O-ring/Flapper . . . . .. ... . . . Viton Hydraulic Motor . . ... .. .. . . . Iron, Gerotor Type, .08 Cu. In. Displacement Weight . . . ... . . . . . . . ... . . 12 lbs.   APPLICATIONS • Marine • Agricultural • Industrial   PUMP CONSTRUCTION • 316 Stainless Steel Investment Cast   HYDRAULIC MOTOR SPECIFICATIONS • .08 cu. in displacement • Max. Oil Flow: 3 GPM • Max. Pressure: 1000 PSI   Hydraulic Motor Port Sizes: • SAE # 4 Pressure • SAE # 6 Tank   Pump Port Sizes: • 3/4” NPT • 1/8” NPT Fill Port

Hypro 9202C Centrifugal Pump with 1-1/4" NPT Inlet x 1" NPT Outlet Gear Driven Cast Iron Centrifugal Pump with 1-1/4" NPT Inlet x 1" NPT Outlet MaterialCast Iron Pump Series9202C Gasket MaterialViton Pump MountPedestal Inlet1-1/4" NPT Outlet1" NPT Maximum (RPM)6000 Maximum Temperature (F°)140 Maximum Flow Rate (GPM)103 Maximum Pressure (PSI)170

Hypro 9910-Hyd2495, Hydraulic Motor Mounting Flange Kit For D70   Fits diaphragm pump models 9910-D70 and 9910-D115 Includes: one flange with SAE "A" 2-bolt, one coupling, two pins, spacer and hardware for mounting.

Hypro 3430-0158, Kit for Roller Pumps 4101C & 4001C

Applications for the TE-5.5C-MD Magnetic Drive Pump include chemical recirculation, chemical transfer, refrigerators, scrubber systems, detergent mixers, computer cooling, carbon arc furnace cooling, silver recovery systems, and marine air conditioners.    March Pump's industrial TE-5.5C-MD is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation, chemical transfer, and scrubber systems. It is capable of generating a maximum flow of 30 gallons per minute at 11 feet, and its maximum head is 41 Feet (or around 18PSI). The standard wet end (the materials that come into contact with the solution) is composed of Polypropylene, Viton, Ryton/Teflon/Carbon, and Ceramic. The inlet connection is 1 inch female pipe thread, and the outlet is 0.75 inch male pipe thread. The standard motor is a 1 Phase 115/230V or 3 Phase 230/460V 0.33 Horsepower air cooled motor, which can be run on either 50 or 60 hertz (there are performance differences between the hertz options).  The maximum internal pressure the pump can tolerate is 50PSI, and the maximum liquid temperature is 190 Fahrenheit or 87 Celsius. The March TE-5.5C-MD centrifugal magnetic drive pump is capable of handling mildly or highly corrosive chemicals, acids, and solvents.   The TE-5.5C-MD pumps Acetic Acid, Citric Acid, Ethylene Glycol, Formaldehyde, Hydrochloric Acid (Muriatic), Nitric Acid, Phosphoric Acid, Potassium Chloride, Potassium Hydroxide, Sodium Hydroxide (Caustic Soda), Sodium Chloride, Sulfuric Acid, Fresh Water, Salt Water, DI Water, and many more chemicals.      Unit System 60Hz 50Hz Max Flow 30 GPM 102 LPM Max Head 41 FT 9 M Power .33 HP .248 KW Electrical 1PH 115/230V                   3PH 230/460V 50/60HZ   Type Centrifugal Mag Drive Inlet 1"FPT Outlet 3/4"MPT Wet End Polypropylene (Front and Rear Housing, Impeller), Viton (O-Ring), Ceramic (Shaft, Thrust Washers)

Hypro 4101Xl-A, Roller Pump 7Gpm 150Psi Hypro roller pumps are designed for agricultural and industrial spraying and transfer of a variety of fluids. These include insecticides, herbicides, emulsives, aromatic solvents, liquid fertilizers and many other liquids.   The economical rotary-action roller principle requires no check valves while providing positive displacement characteristics with less friction and lower starting torque than other pumps. Ready for use with Roundup®.   Features: Max flow: 7 gpm Max pressure: 150 psi Max speed: 2600 rpm Port sizes: 3/4" NPT  Pump shaft rotation: CW 5/8" solid stainless steel shaft ( 1/2" Hollow Shaft also available)

Hypro 6500N, Roller Pump   Hypro roller pumps are designed for agricultural and industrial spraying and transfer of a variety of fluids. These include insecticides, herbicides, emulsives, aromatic solvents, liquid fertilizers and many other liquids.   The economical rotary-action roller principle requires no check valves while providing positive displacement characteristics with less friction and lower starting torque than other pumps.    Features: Max flow: 22 gpm Max pressure: 300 psi Max speed: 1200 rpm Port sizes: 3/4" NPT  Pump shaft rotation: CCW 5/8" solid stainless steel shaft   Additional Features: 9.7 gpm/36.7 lpm at 540 rpm 18.2 gpm/68.9 lpm at 1000 rpm 21.8 gpm/82.5 lpm at 1200 rpm

Hypro 6500XL, Roller Pump   Hypro roller pumps are designed for agricultural and industrial spraying and transfer of a variety of fluids. These include insecticides, herbicides, emulsives, aromatic solvents, liquid fertilizers and many other liquids.   The economical rotary-action roller principle requires no check valves while providing positive displacement characteristics with less friction and lower starting torque than other pumps. Ready for use with Roundup®.   Features: Max flow: 22 gpm Max pressure: 300 psi Max speed: 1200 rpm Port sizes: 3/4" NPT  Pump shaft rotation: CCW 5/8" solid stainless steel shaft   Additional Features: 9.7 gpm/36.7 lpm at 540 rpm 18.2 gpm/68.9 lpm at 1000 rpm 21.8 gpm/82.5 lpm at 1200 rpm

Hypro 7560C, Roller Pump Ci Nyln Rollers   This HYPRO® 8-roller pump has a maximum pressure of 300 PSI. It can continuously operate at 100 PSI with a maximum flow rate of 12 GPM at 540 RPM. It can also operate at 22.5 GPM at 1000 RPM.    This hydraulic pump unit ships with a 3/4" NPT female with Super Rollers and Viton shaft seals.    Specifications   HYPRO® 7560C Roller Water Pump 8 roller water pump Maximum flow rate 22.5 GPM at 1000 RPM Maximum 1000 RPM 15/16" solid shaft 3/4" NPT inlet Continuous operation 100 at PSI and intermittent operation at 300 PSI Quick coupler not included: Use ASC# 25131 for 540 RPM and ASC# 25132 for 1000 RPM

Hypro 7700C, Roller Pump   Hypro roller pumps are designed for agricultural and industrial spraying and transfer of a variety of fluids. These include insecticides, herbicides, emulsives, aromatic solvents, liquid fertilizers and many other liquids.   The economical rotary-action roller principle requires no check valves while providing positive displacement characteristics with less friction and lower starting torque than other pumps.    Features: Max flow: 22.1 gpm Max pressure: 200 psi Max speed: 800 rpm Port sizes: 3/4" NPT  Pump shaft rotation: CCW 15/16" solid stainless steel shaft   Additional Features: 14.2 gpm/53.7 lpm at 540 rpm 22.1 gpm/83.6 lpm at 800 rpm

Hypro 1543P-130ESP, 3" Polypropylene Gas-Driven Transfer Pump W/ Electric Start   Achieve the highest performance available in a 3" poly transfer pump (up to 484 GPM) with the highest efficiency and horsepower on the market. Ideal for nurse tank transfer and other closed system applications. The polypropylene housing and EPDM elastomers protect the pump from most chemicals and corrosive environments. Gas engine mount, pedestal mount or hydraulic drive options available Housing: 3" x 3" Polypropylene Pump seals: EPDM Mechanical Suction Lift: 25 ft/7.62m Poly impeller with stainless steel insert   Details: Max GPM: 440 Max PSI: 54 Port Size: 3" X 3" Engine: 13 HP PowerPro Engine with Electric Start  

Hypro 2005-0006 Ball Bearing For Pump Series/Model #: 9307CWS-GM12