Oil Extractor 2.5L Capacity - DIY Series These compact, powerful pumps make oil changes fast, efficient and clearner than you ever thought possible. They take less than 10 seconds to prime and have see-through calibrated containers for quick visual reference of oil level. Non-kinking, flexible metallic extractor tubes. Model 75-6060 has a large 6-liter capacity to meet the needs of most boaters. Model 75-6025 is a down-sized, 2.5-liter version of the 6000 that’s perfect for four-strokes up to 50hp and sailboats with small engines.  Note: Not for use with flammable products.

Oil Extractor 6.5L Capacity - Pro Series Mid-Size container for smaller jobs and tighter areas. The heavy duty construction makes this extractor perfect for shop use for the mobile service professional. Safe, no-Spark hand operation. Check valve for easy release of displaced air in container. Extra long 48" hoses with fittings included for almost any extraction application. Newly designed decompression valve to release negative pressure. See-through container for quick visual reference. Convenient foot board for added stability while in operation. Pour spout for no-mess fluid disposal. Suitable for engine oil, gear lube, brake fluid, coolant, water etc. Note: Not for use with Flammable or Corrosive products.

Oil Extractor 6L Capacity - DIY Series These compact, powerful pumps make oil changes fast, efficient and clearner than you ever thought possible. They take less than 10 seconds to prime and have see-through calibrated containers for quick visual reference of oil level. Non-kinking, flexible metallic extractor tubes. Model 75-6060 has a large 6-liter capacity to meet the needs of most boaters. Model 75-6025 is a down-sized, 2.5-liter version of the 6000 that’s perfect for four-strokes up to 50hp and sailboats with small engines.  Note: Not for use with flammable products.

Oil Extractor 15L Capacity - Pro Series High capacity accommodates larger 4-stroke engines. The heavy duty construction makes this extractor perfect for shop use or the mobile service professional. Safe, no-Spark hand operation. Check valve for easy release of displaced air in container. Extra long 48" hoses with fittings included for almost any extraction application. Newly designed decompression valve to release negative pressure. See-through container for quick visual reference. Convenient foot board for added stability while in operation. Pour spout for no-mess fluid disposal. Suitable for engine oil, gear lube, brake fluid, coolant, water etc. Note: Not for use with Flammable or Corrosive products.

Oil Extractor 15L Capacity Pro Series with Pneumatic Fitting Easy to use for do-it-yourself applications, but heavy-duty construction will stand up for shop use or mobile service professionals. A built-in check valve allows easy release of displaced air and the decompression valve releases negative pressure. See-through container for quick reference and a built-in pour spout for no-mess disposal. 48" hoses with fittings included. Suitable for engine oil, gear lube, brake fluid, coolant, etc. Not for use with flammable or corrosive products. Can be operated manually or attached to a compressor and features a 40-170 psi working range and 1/4" air inlet.

Cat Pump 6102 Crankcase Oil-Ind 2.5 Gal Cat Pumps custom blend crankcase oil is exclusively designed, tested, and proven to maximize the life of your Cat Pump. This specially formulated premium-grade, petroleum-based, ISO 68 hydraulic oil contains the most advanced additive package to protect against wear, oxidation, rust, and corrosion. Model 6102 contains one 2.5 gallon container.

Cat Pumps Crankcase Oil -Twin 2.5 Galllon Containers   Cat Pumps custom blend crankcase oil is exclusively designed, tested and proven to maximize the life of your Cat Pump. This special formulated premium-grade, petroleum-based, ISO 68 hydraulic oil contains the most advanced additive package to protect against wear, oxidation, rust and corrosion. Model 6105 contains 2  2.5 gallon containers.

Hydra-Cell A01-114-3442 Oil 40W 2-1/2 Gallon

Original Equipment Quality Replacement Tilt Trim Motor for Late Model Volvo Penta with Oildyne Pump - 2 Wire Replacement tilt trim motor that will fit 6227, Late model Volvo Penta, w/Oildyne pump, 2-wire connection.  ARCO advises cleaning all connections: A corroded connection creates resistance, lowering the amperage required to operate the motor. Features: Tilt trim motors are dynamically tested to ensure out-of-the-box performance  Motor shafts induction case hardened at bearing surfaces for superior wear resistance  Epoxy Powder coated for maximum insulation protection Warranty Information: When properly installed, all ARCO products are warrantied against defects in materials and workmanship for 12 months for leisure use and 90 days for commercial or racing applications.  Add an extra year of warranty to your rotating electric ARCO product (Tilt/Trim Motors, Alternators, Outboard Starters, and Inboard Starters) when you register your product within 30 days of purchase. You can register your product by visiting arcomarine.com/product-registration  Replaces: VOLVO Tilt Trim Motor 3151278 VOLVO Tilt Trim Motor 3858071 VOLVO Tilt Trim Motor 854525-3 SIERRA Tilt Trim Motor 18-6805 SIERRA Tilt Trim Motor 18-6817 This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

As the Fall months creep into our calendars, boat owners in cooler climates acknowledge, with sadness, that it’s time to put the boat away. Outside Storage? It’s a thought and an option but consider that you may be threatened by snow build up, tornadoes or hurricanes. The success of storing your boat outside depends on how well your boat is protected from the conditions outdoors.                          Rinse/Flush Rinsing the outside of your boat and trailer thoroughly with fresh water will remove excess salt. Pay particular attention to your trailer’s leaf springs, wheel hubs and brakes that are constantly submerged during launching and retrieval of your boat. Flush your engine's cooling system with fresh water in line with your engine manufacturer’s salt removal recommendations. This will minimize corrosion and overheating issues come spring. Drain your boat of all water – bilge, head, sink lines, water tanks, sea-cocks, and pipes. If you are in an area with extended periods of freezing, put antifreeze in the low parts if there is still some water present. Salt Watch out for salt. Buy a good salt remover to minimize corrosion. Add fuel stabilizer to top off your fuel tanks. Here is one recommended by CLR Marine. Diesel Formula Fuel Stabilizer & Performance Improver - 32oz *Case of 4* STA-BIL Diesel Formula Fuel Stabilizer is a diesel additive that keeps fuel fresh for quick, easy starts and maximized for engine performance. Designed for use with all diesel engines, and all diesel fuels, Sta-Bil Fuel Stabilizer Diesel formula prevents sludge and sediment formation, cleans and lubricates fuel injectors to improve performance and helps remove water. It is safe to use and recommended for use at every fill up, with the 32 ounce bottle treating up to 320 gallons of fuel. Batteries Remove the batteries from your boat and store in your garage or basement. Batteries should be connected to a battery charger that will give them a good charge and one that w automatically switches to a float/trickle charge to keep your batteries topped up. Match your charger to the type of battery you are charging. Using a charger manufactured for lead acid batteries to charge an AGM (absorbent glass mat) battery will cause damage to the battery. If you choose to keep your batteries in the boat, connect a solar trickle charger. These chargers will keep your batteries topped off without the hassle of removing heavy batteries from your boat. Cleaning Clean the exterior with the proper fiber glass or wood cleaner needed for your boat. Bright work can be cleaned by removing the wood or cleaning it as it is - installed. Be careful to not get the wood cleaner onto the deck surfaces. The exterior should be dried with a chamois cloth. Vinyl seat cushions and backs should be cleaned with vinyl cleaner. Hard surfaces inside the vessel can be wiped with all purpose cleaners. End your cleaning with a coat of wax to the exterior and polish. Don’t forget the bottom paint. Before you store, spend the time to give your boat a thorough cleaning. CLR Marine has many products by trusted brands such as Powerhouse, Davis Instruments, Jabsco, Shurhold, and Swobbit, to help winterize and clean. You will be grateful in the spring during launch time that your boat is already clean as the new boating season begins. Cover Up If you store outside in your yard, driveway, or a boat yard, a boat cover is a must to prevent damage from winter conditions. Leaving your boat in the water is not recommended. The boat is exposed to rough weather, and has a greater possibility of sinking if you aren’t monitoring it often. https://www.clrmarine.com/462m4/boat-outfitting/winter-covers.html and https://www.clrmarine.com/462m4/winterizing.html Circle May 21, 2022, on your calendar. The date is almost ten days before Memorial Day, next year when most harbors open for the season. Start your prep work, tune-ups, sanding, and painting to get out on the water and a great boating season. In the meantime, during the cold winter months, cozy up to the fire and read your boating manuals, new safety regulations and weather information. Fair winds and smooth sailing.   To obtain more information about the products and services mentioned in this article, please get in touch with CLR Marine https://www.clrmarine.com/. _________________________________________________________________________ Award-winning author Cheryl Kuba has been at the helm for more than 30 years sailing the Great Lakes, with side trips to the British Virgin Islands and St. Maarten. She has served as past- Commodore of Great Lakes Fleet 21 -Chicago region. 3happycampers.com ©Copyright Cheryl Kuba, 3happycampers.com, 2021.  

Haight Pump 3E-001000 3E Pump Hd Hot Oil Tang Dr Specifications Capacity range is:  Up to Capacity Max Construction Material:  Gray Iron Capacity (max):  3 gpm Pump Speed:  1740 RPM   E Series - Positive Displacement Pump   The E - Series positive displacement pumps are an economical, high performance modification to our D - Series models.  These pumps are particularly well suited for use in direct drive, hub mounted configurations where size, weight, and cost are crucial performance criteria in an application.  The rugged simplicity of the E - Series is proven thousands of times every year in high temperature applications through-out the world.  

Porta Potti 365 Marine Toilet The Porta Potti Qube 365 is a family size portable toilet with a high capacity waste holding tank and a natural seating height. Features: White or ivory finish Manual flush, piston pump Integrated pour-out spout Integrated cover-lock on all models Benefits: Modern, refreshed design Improved valve handle system Improved carry handle of the waste holding tank Improved seating comfort

Mate USA M164-220-12 12V GEAR PUMP FOR LUBR OIL Voltage: 12V DC Capacity: 0.85 gpm @ 80°F; 1.0 GPM @ 115°F (Max.) Type: UP2/Oil - Gear Pump for Lubricating Oil Transfer Dimensions: 5"L x 4-3/8"W x 4"H Fuse: 3A Self-Priming: 3.3 ft (1 m) Max. Amp Draw: 2.7A Max. Flow @ 80°F: 0.85 gpm Max. Flow @ 100°F: 0.92 gpm Max. Flow @ 115°F: 1.0 gpm • Connections — 3/8" male NPT (tapered) O-ring sealed adpaters threaded into 3/8" female BSPP ports in the pump head • Nickel-plated brass body, stainless steel shaft, and helical bronze gears • Small, compact footprint for its output • Vibration absorbing rubber mounting feet • Rated for intermittant duty • Not ignition protected - NOT for use with gasoline   NOTE: No Transfer Pump should be used with Gasoline unless it says it is made for it.  

Mate USA M164-220-13 24V GEAR PUMP FOR LUB OIL Voltage: 24V DC Capacity: 0.85 gpm @ 80°F; 1.0 GPM @ 115°F (Max.) Type: UP2⁄Oil - Gear Pump for Lubricating Oil Transfer Dimensions: 5"L x 4-3/8"W x 4"H Fuse: 3A Self-Priming: 3.3 ft (1 m) Max. Amp Draw: 2.7A Max. Flow @ 80°F: 0.85 gpm Max. Flow @ 100°F: 0.92 gpm Max. Flow @ 115°F: 1.0 gpm • Connections — 3/8" male NPT (tapered) O-ring sealed adpaters threaded into 3/8" female BSPP ports in the pump head • Nickel-plated brass body, stainless steel shaft, and helical bronze gears • Small, compact footprint for its output • Vibration absorbing rubber mounting feet • Rated for intermittant duty • Not ignition protected - NOT for use with gasoline  

Passport Potty 8L SpaceSaver Portable Toilet Features: 2-section Portable Flush Toilet Strong, durable construction Bi-directional piston pump rinse Leak and odor proof seal Waste level indicator Large fresh water capacity 8L holding tank capacities