|
Rectangular Motor Flush
Molded PVC/Painted Steel
Outboard Rectangular Motor Flush quickly flushes away salt, sand, minerals, and contaminates from your lower unit cooling system, extending the engine’s service life. Easy-to-use molded PVC cups deliver fresh water to flush the cooling system through side intakes on the lower unit. Simple garden hose connection, no tools required. Great for winterizing, tune-ups, and other maintenance that requires running an outboard engine out of the water. Features rectangular cups for use with larger outboards.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
7.43 |
|
|
Inboard Motor Flush
Molded Rubber/Aluminum
Inboard Motor Flush quickly flushes away salt, sand, minerals, and contaminates from your lower unit cooling system extending the engine’s service life. Easy-to-use by fitting the rubber cup over the water intake, connecting a garden hose, and extending the aluminum leg to seal the cup to the hull. Fresh water flushes the cooling system, no tools required. Great for winterizing, tune-ups, and other maintenance that requires running an inboard engine out of the water.
|
17.40 |
|
|
Motor Flush Ear Muff
Outboard motor flushers quickly flush away salt, sand, minerals and contaminates from your lower unit cooling system extending the engine’s service life. Easy to use molded PVC cups deliver fresh water to flush the cooling system through side intakes on the lower unit. Simple garden hose connection, no tools required. Great for winterizing, tune-ups and other maintenance that requires running an outboard engine out of the water.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
7.55 |
|
|
SEA-DOG
Sea-Dog Line carries quality marine gear such as Deck Hardware, Hinges, Lighting, Plumbing, Fishing Equipment, Clamcleats, Chain and Rigging Hardware and more.
|
|
|
Universal Motor Flusher with Rectangular Cups
Features:
Universal Motor Flush
Rectangular Cups Included
|
7.75 |
|
|
Synchronized Wiper Control - Powder Coated Aluminum/Stainless Steel
Synchronized Wiper Control will sync up to three motors and adds an interval speed position to the traditional two-speed motor. One short push takes the motors from interval, to slow, to fast speed. One long push activates the primary motor only. Capable of operating a washer system like the Sea-Dog® Windshield Washer Kit (414900-3). Includes synchronized controller, switch, and 5’ wiring harness. Overload protected. CE compliant.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
173.40 |
|
|
Synchronized Wiper Control & Windshield Washer Kit
Synchronized Wiper Control will sync up to three motors and adds an interval speed position to the traditional two-speed motor. One short push takes the motors from interval, to slow, to fast speed. One long push activates the primary motor only. Capable of operating a washer system like the Sea-Dog® Windshield Washer Kit (414900-3). Includes synchronized controller, switch, and 5’ wiring harness. Overload protected. CE compliant.
This Windshield Washer Kit comes complete with everything needed for a new installation. Includes tank with pump, wiring harness for the pump motor connection, toggle switch, 15' of clear tubing, hose barb tee, two spray nozzles, and mounting bracket. Tank capacity is 2.5 liters (2.66 quarts). Installs with two #10 RH fasteners (included).
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
173.40 |
|
|
Stainless Steel Flush Mount Rod Holder with Cap - 90°
A high quality, vertical mount rod holder! These 90° Flush Mount Rod Holders are constructed of investment cast 316 stainless steel with a plastic liner, integral cap, and mounting gasket. Features a 90° angle. Accommodates rods up to 1-1/2". Installs with three #12 FH fasteners (not included).
|
47.80 |
|
|
Stainless Steel Flush Mount Side Lights
Flush Mount Side Lights are constructed of stamped 304 stainless steel. One pair includes port and starboard lights. For replacement of existing lighting (not for new construction). Installs with four #8 RH fasteners (not included). Approved for USCG 1 NM (A-16). All USCG approved navigation lights must be mounted properly to provide the correct visual alignment and allow unimpeded sight lines. Please refer to USCG regulations for 1 NM and 2 NM navigation lights for more information.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
46.45 |
|
|
Stainless Steel Flush Mount LED Side Lights
LED Flush Mount Side Lights are approved for USCG 1 NM (Colreg 1 mile). Direct replacement for the 400180. One pair includes port and starboard lights. Constructed of stamped 304 stainless steel. Installs with four #8 RH fasteners (not included). 12V. All USCG approved navigation lights must be mounted properly to provide the correct visual alignment and allow unimpeded sight lines. Please refer to USCG regulations for 1 NM and 2 NM navigation lights for more information.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
90.16 |
|
|
Stainless Steel Flush Mount Gas Tank Vent 5/8" Hose - Straight
The Flush Mount Gas Tank Vent provides the needed air flow to maintain proper fuel flow while filling and during use. Vents compensate for changes in tank level due to consumption, as well as temperature related expansion and contraction. Designed to prevent vacuum build-up during use, which can disrupt fuel delivery they also double as a pressure release valve for the gas tank. Helps prevent fuel spills, blow-back, and ensures fumes vent outboard instead of inside the boat. An integral 5/8" hose barb securely connects vent hose. Constructed of corrosion resistant investment cast 316 stainless steel.
|
25.91 |
|
|
Pro Dual Feed Motor Flusher with Rectangular Cups
Features:
Dual Feed Motor Flusher
Rectangular Cups Included
|
20.11 |
|
|
Gas Filled Lift Spring - 20" - 90#
Sea-Dog® Gas Springs and hardware are manufactured to marine OE standards and have been installed in marine and RV applications for several years. You can count on our high quality and a 2-year warranty on all Sea-Dog® Gas Springs.
Sea-Dog® Gas Springs are the ideal choice for all marine, RV, truck cap, tool box, and utility applications because of their unique multi-lobe seal which offers superior service life and performance. Hard chromium plated shafts, bronze bushings, and polymer end fittings mean you are buying THE BEST.
Other applications for Sea-Dog® Gas Springs: Hatches, doors, tool boxes, farm machinery, golf carts, luggage doors, engine hatches, canopies, access hatches, seating, RV doors, furniture, truck caps, and utility boxes. Accepts 10 mm ball.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
26.09 |
|
|
Kayak Recreational Angled Footbrace with Rudder Control
This Sea-Dog Angled Footbrace with a rudder control slide is perfect for rudder and motor control steering. The footbrace is designed for sit-on-top kayaks or canoes with a raised seat, providing ergonomic and comfortable foot placement. The wider, longer pedal shape is secure and barefoot-friendly. With an adjustment range of 11-½” this can be set to fit almost anyone.
Features:
Slotted mounting holes accommodating 14-1/8” to 14-5/8” center-to-center applications
Proudly designed and constructed in the USA of injection molded polypropylene and glass-filled nylon
Specifications:
Track Type: Standard
Weight: 1.70 lbs
Fastener Size: 1/4 in.
|
26.64 |
|
|
Kayak Hatch Cover - VCP Oval
The VCP Oval Hatch Cover is a great replacement for lost or damaged lids. This performance hatch features Sea-Dog's unique two-part construction for maximum protection. Designed to float when dropped in the water, the hatch lids are easy to attach while still offering a superior watertight seal.
This Sea-Dog VCP Oval Hatch Cover is compatible with the Valley Canoe Products® (VCP) oval hatch when mounted on an injection-molded rim bolted/glued to the deck; it is not recommended for rotomolded kayaks that do not feature this rim.
*Sea-Dog® is not affiliated with Valley Sea Kayaks® and/or Kayak Sport®; reference to these brands only indicates similar sizing of hatch cover products.
Features:
Proudly constructed in the USA of injection molded nylon and polypropylene
Lid only
Specifications:
Diameter: 17-1/4 in.
Style: Performance
Weight: 1.30 lb.
|
47.21 |
|