ProSport 1.5A Multi-Use Maintainer - 120V - 1-Bank ProSport 1.5 Amp fully automatic maintainer is an innovative multi-use charger designed for maximum utility. Concealed mounting holes allow the ProSport 1.5 to be installed on-board or to be used as a portable, with rear die cut foam resting pad. Ring terminal and DC clamp quick connect cable assemblies included. Our marine grade design is weatherproof, water resistant to IP 65 and can be used in all fresh and salt water outdoor and indoor applications as needed. Designed to keep 12V batteries fully charged during short or long term storage periods, ProSport's Energy Saver mode will monitor and auto maintain a battery when needed to maintain a full state of charge. ProSport 1.5 significantly reduces AC Power consumption, lowers operating costs and maximizes reserve power performance. Features: Fully automatic energy saving design Multi-use design, easily configures for on-board or portable use Concealed mounting holes & die cut foam resting pad for portable use Expanded LED display for Power, Charging and Auto Maintain status Maintain 12V lead acid (sealed & vented) batteries up to 150A hours Quick connect DC clamp & ring terminal cable assemblies Weatherproof and water resistant to IP65 Built-in safety with reverse polarity, short circuit, temperature and ignition protection Pre-wired for easy installation 3 year warranty Meets UL 1236 and CSA Standards, cETLus WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

ProSportHD 10 Gen 4 - 10 Amp - 2-Bank Battery Charger ProSportHD Generation 4 boasts a tri-surface heatsink design. This heavy-duty lightweight design delivers significantly faster charging through optimal cooling while delivering true rated amp output during charge mode.  ProSportHD's enhanced microprocessor and software provide digital features including a fuel gauge style Charge Completion Monitor, Charge Mode, individual Fault indicators, and three digitally selectable performance charge profiles for Flooded (lead acid), AGM, and GEL batteries. HP AGM profile on ProSportHD 20 Dual only.  Fully automatic 5-stage charging enhances battery performance while extending battery life. System Check OK and Battery Status indicators provide real-time installation and battery fault status.  Designed for harsh environments with our industrial-grade jacketed DC and AC power cables which include molded strain reliefs and wire splitters.  Features: ProMar Digital Technology Microprocessor and software-controlled charging technology for fast, precise charging Distributed-On-Demand™ Technology 100% of all available charging amps are utilized by distributing unused charging amps to any one or combination of all batteries as needed Heavy Duty Tri-Surface Extruded Heat Sink Design Upper, lower, and rear-facing heat sink design for optimal cooling while delivering true rated constant current charging amps during its two charge mode Expanded LED Display with Completion Status Gauge LED fuel gauge style completion status. Four-color multi-stage mode LED status bar. Multi-stage Charge Mode, System Check OK, individual Battery Status, and Battery Type indication Lightweight Design Up to 40% lighter compared to an epoxy-filled charger Auto-Maintain Energy Saver Mode Monitor and auto-maintain batteries only when needed to maintain a full state of charge. This significantly reduces AC power consumption Fully Automatic 5-Stage Digital Performance Charging 5 Stages: Analyzes, charges, conditions, auto maintains, and reconditions batteries once a month during storage periods. Fully charges and extends battery life Built-in Quality and Safety Dual inline waterproof fuses, reverse polarity, over-temperature, over-current, over-voltage and ignition protection. Certified to Marine UL 1236. CEC and DOE listed. FCC Class B Easy installation and operation Pre-wired with 6’ AC and DC cables Battery Type: Group 24–31 Flooded, AGM, HP AGM and GEL batteries 3 Year Warranty Specifications: DC Voltage Systems: 12/24v DC Output: Two 12VDC @ 10 amps, fully distributed Charging/Maintaining VDC Output: Up to 14.7VDC/13.8VDC Battery Types: Flooded (lead acid), AGM, Gel, or LiFePO4 AC Input: 120VAC +/-10%, 50/60Hz, 3A Amps: 10 No. of Batteries: 2 AC & DC Cable Length: 6 ft. Dimensions (inch): 10.5" x 7.9" x 2.9"

ProSportHD 15 Gen 4 - 15 Amp - 3-Bank Battery Charger ProSportHD Generation 4 boasts a tri-surface heatsink design. This heavy-duty lightweight design delivers significantly faster charging through optimal cooling while delivering true rated amp output during charge mode.  ProSportHD's enhanced microprocessor and software provide digital features including a fuel gauge style Charge Completion Monitor, Charge Mode, individual Fault indicators, and three digitally selectable performance charge profiles for Flooded (lead acid), AGM, and GEL batteries. HP AGM profile on ProSportHD 20 Dual only.  Fully automatic 5-stage charging enhances battery performance while extending battery life. System Check OK and Battery Status indicators provide real-time installation and battery fault status.  Designed for harsh environments with our industrial-grade jacketed DC and AC power cables which include molded strain reliefs and wire splitters.  Features: ProMar Digital Technology Microprocessor and software-controlled charging technology for fast, precise charging Distributed-On-Demand™ Technology 100% of all available charging amps are utilized by distributing unused charging amps to any one or combination of all batteries as needed Heavy Duty Tri-Surface Extruded Heat Sink Design Upper, lower, and rear-facing heat sink design for optimal cooling while delivering true rated constant current charging amps during its two charge mode Expanded LED Display with Completion Status Gauge LED fuel gauge style completion status. Four-color multi-stage mode LED status bar. Multi-stage Charge Mode, System Check OK, individual Battery Status, and Battery Type indication Lightweight Design Up to 40% lighter compared to an epoxy-filled charger Auto-Maintain Energy Saver Mode Monitor and auto-maintain batteries only when needed to maintain a full state of charge. This significantly reduces AC power consumption Fully Automatic 5-Stage Digital Performance Charging 5 Stages: Analyzes, charges, conditions, auto maintains, and reconditions batteries once a month during storage periods. Fully charges and extends battery life Built-in Quality and Safety Dual inline waterproof fuses, reverse polarity, over-temperature, over-current, over-voltage and ignition protection. Certified to Marine UL 1236. CEC and DOE are listed. FCC Class B Easy installation and operation Pre-wired with 6’ AC and DC cables Battery Type: Group 24–31 Flooded, AGM, HP AGM and GEL batteries 3 Year Warranty Specifications: DC Voltage Systems: 12/24v DC Output: Two 12VDC @ 15 amps, fully distributed Charging/Maintaining VDC Output: Up to 14.7VDC/13.8VDC Battery Types: Flooded (lead acid), AGM, Gel, or LiFePO4 AC Input: 120VAC +/-10%, 50/60Hz, 3A Amps: 15 No. of Batteries: 3 AC & DC Cable Length: 6 ft. Dimensions (inch): 10.5" x 7.9" x 2.9"

ProSportHD 8 Gen 4 - 8 Amp - 2 Bank Battery Charger ProSportHD Generation 4 boasts a tri-surface heatsink design. This heavy-duty lightweight design delivers significantly faster charging through optimal cooling, while delivering true rated amp output during charge mode.  ProSportHD's enhanced microprocessor and software provides digital features including: fuel gauge style Charge Completion Monitor, Charge Mode, individual Fault indicators and three digitally selectable performance charge profiles for Flooded (lead acid), AGM and GEL batteries. HP AGM profile on ProSportHD 20 Dual only.  Fully automatic 5-stage charging enhances battery performance while extending battery life. System Check OK and Battery Status indicators provide real time installation and battery fault status.  Designed for use in harsh environments with our industrial grade jacketed DC and AC power cables which include molded strain reliefs and wire splitters.  Features: ProMar Digital Technology Microprocessor and software controlled charging technology for fast, precise charging Distributed-On-Demand™ Technology 100% of all available charging amps are utilized by distributing unused charging amps to any one or combination of all batteries as needed Heavy Duty Tri-Surface Extruded Heat Sink Design Upper, lower and rear facing heat sink design for optimal cooling while delivering true rated constant current charging amps during its two charge mode Expanded LED Display with Completion Status Gauge LED fuel gauge style completion status. Four color multi-stage mode LED status bar. Multi-stage Charge Mode, System Check OK, individual Battery Status and Battery Type indication Lightweight Design Up to 40% lighter compared to an epoxy filled charger Auto-Maintain Energy Saver Mode Monitor and auto maintain batteries only when needed to maintain full state of charge. This significantly reduces AC power consumption Fully Automatic 5-Stage Digital Performance Charging 5 Stages: Analyzes, charges, conditions, auto maintains and reconditions batteries once a month during storage periods. Fully charges and extends battery life Built-in Quality and Safety Dual inline waterproof fuses, reverse polarity, over-temperature, over-current, over-voltage and ignition protection. Certified to Marine UL 1236. CEC and DOE listed. FCC Class B Easy Installation and Operation Pre-wired with 6’ AC and DC cables Battery Type: Group 24–31 Flooded, AGM, HP AGM and GEL batteries 3 Year Warranty WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

ProSportHD 12 Gen 4 - 12 Amp - 2 Bank Battery Charger ProSportHD Generation 4 boasts a tri-surface heatsink design. This heavy-duty lightweight design delivers significantly faster charging through optimal cooling, while delivering true rated amp output during charge mode.  ProSportHD's enhanced microprocessor and software provides digital features including: fuel gauge style Charge Completion Monitor, Charge Mode, individual Fault indicators and three digitally selectable performance charge profiles for Flooded (lead acid), AGM and GEL batteries. HP AGM profile on ProSportHD 20 Dual only.  Fully automatic 5-stage charging enhances battery performance while extending battery life. System Check OK and Battery Status indicators provide real time installation and battery fault status.  Designed for use in harsh environments with our industrial grade jacketed DC and AC power cables which include molded strain reliefs and wire splitters.  Features: ProMar Digital Technology Microprocessor and software controlled charging technology for fast, precise charging Distributed-On-Demand™ Technology 100% of all available charging amps are utilized by distributing unused charging amps to any one or combination of all batteries as needed Heavy Duty Tri-Surface Extruded Heat Sink Design Upper, lower and rear facing heat sink design for optimal cooling while delivering true rated constant current charging amps during its two charge mode Expanded LED Display with Completion Status Gauge LED fuel gauge style completion status. Four color multi-stage mode LED status bar. Multi-stage Charge Mode, System Check OK, individual Battery Status and Battery Type indication Lightweight Design Up to 40% lighter compared to an epoxy filled charger Auto-Maintain Energy Saver Mode Monitor and auto maintain batteries only when needed to maintain full state of charge. This significantly reduces AC power consumption Fully Automatic 5-Stage Digital Performance Charging 5 Stages: Analyzes, charges, conditions, auto maintains and reconditions batteries once a month during storage periods. Fully charges and extends battery life Built-in Quality and Safety Dual inline waterproof fuses, reverse polarity, over-temperature, over-current, over-voltage and ignition protection. Certified to Marine UL 1236. CEC and DOE listed. FCC Class B Easy Installation and Operation Pre-wired with 6’ AC and DC cables Battery Type: Group 24–31 Flooded, AGM, HP AGM and GEL batteries 3 Year Warranty WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

ProSportHD 20 Gen 4 - 20 Amp - 2 Bank Battery Charger ProSportHD Generation 4 boasts a tri-surface heatsink design. This heavy-duty lightweight design delivers significantly faster charging through optimal cooling, while delivering true rated amp output during charge mode.  ProSportHD's enhanced microprocessor and software provides digital features including: fuel gauge style Charge Completion Monitor, Charge Mode, individual Fault indicators and three digitally selectable performance charge profiles for Flooded (lead acid), AGM and GEL batteries. HP AGM profile on ProSportHD 20 Dual only.  Fully automatic 5-stage charging enhances battery performance while extending battery life. System Check OK and Battery Status indicators provide real time installation and battery fault status.  Designed for use in harsh environments with our industrial grade jacketed DC and AC power cables which include molded strain reliefs and wire splitters.  Features: ProMar Digital Technology Microprocessor and software controlled charging technology for fast, precise charging Distributed-On-Demand™ Technology 100% of all available charging amps are utilized by distributing unused charging amps to any one or combination of all batteries as needed Heavy Duty Tri-Surface Extruded Heat Sink Design Upper, lower and rear facing heat sink design for optimal cooling while delivering true rated constant current charging amps during its two charge mode Expanded LED Display with Completion Status Gauge LED fuel gauge style completion status. Four color multi-stage mode LED status bar. Multi-stage Charge Mode, System Check OK, individual Battery Status and Battery Type indication Lightweight Design Up to 40% lighter compared to an epoxy filled charger Auto-Maintain Energy Saver Mode Monitor and auto maintain batteries only when needed to maintain full state of charge. This significantly reduces AC power consumption Fully Automatic 5-Stage Digital Performance Charging 5 Stages: Analyzes, charges, conditions, auto maintains and reconditions batteries once a month during storage periods. Fully charges and extends battery life Built-in Quality and Safety Dual inline waterproof fuses, reverse polarity, over-temperature, over-current, over-voltage and ignition protection. Certified to Marine UL 1236. CEC and DOE listed. FCC Class B Easy Installation and Operation Pre-wired with 6’ AC and DC cables Battery Type: Group 24–31 Flooded, AGM, HP AGM and GEL batteries 3 Year Warranty WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

keywords: ProMariner, ProSport, GEN 2, ProMariner ProSport GEN 2, invertor, charger

1.5A Maintainer Charger Maintains charge on your battery. Features: 120V AC input, 1.5 Amp, 12V DC output Can be used as a portable maintainer or mounted Maintenance mode starts charging the battery when it falls below 12.8V Short circuit, reverse polarity and temperature protected Includes quick disconnect ring terminals and clamps cETLus certified to cUL1236, CEC WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Purifier & Multi-Use System The RapidPure® Purifier + Multi-Use System is purification YOUR way.  The POD housing slides over the POD purification cartridge and locks it into place to create a 4-way multifunctional system.   Attach to any standard 28mm bottle or use the included soft bottle for filtered and purified water as you drink.  Connect the included emergency straw for a pocket-sized, ultralight purifier.  Hang the soft bottle from a tree to create your own gravity system or connect the system to your hydration pack for inline purification.  Adventure Medical has simplified water purification with the POD system and UltraCeram® technology.  Unlike microfilters that rely on small pore sizes to filter out bacteria and sediment, RapidPure® purifiers combine OpenPore technology for fast flow rates with adsorption (natural magnetic attraction) to remove viruses, bacteria, parasites, sediment, and more.  The POD purification system has an extended lifespan – up to 75 gallons – and continues to work after being frozen for peace of mind if the temperatures suddenly drop.  A device that truly adapts to your adventures, the RapidPure® Purifier + Multi-Use System can be a water bottle, straw, gravity system, or hydration pack purifier. Features:  4-Way Multifunctional Purifier - Connect to any 28mm bottle or use with an included soft bottle, use with the included emergency straw, create your own gravity system, or connect to your hydration pack Innovative POD Platform - POD housing slides over the POD purification cartridge and locks into place to create a multifunctional system Virus Protection - Treats water for viruses, bacteria, parasites, and more with UltraCeram® technology Faster Flow Rates - OpenPore technology uses adsorption (natural magnetic attraction) combined with larger pore sizes for easy drinking Use Anywhere - Purifiers can be used after being frozen. The POD system has extended the cartridge lifespan to 75 gallons Great Tasting Water - Activated carbons instantly remove odors and improve taste In the Box: Straw  RapidPure POD Cartridge Soft water bottle Mouthpiece with cover Instruction manual *Sold as an Individual

V10MR Multi-Use Radio Service (MURS) Transceiver The V10MR is a professional-grade, license-free radio that is ready for any kind of operation. Take advantage of the large communication range*: up to 250,000 square feet in buildings, 20 floors, and up to two miles in a traditional worksite. The long battery life can last up to 14 hours. This radio is suited for service, education, health, tourism, personal use, and more! *Ranges may differ depending on the operating environment  Channels: 16 Channels Output Power: 2W Frequencies: 151.820, 151.880, 151.940, 154.570, 154.600 MHz Waterproof Rating: IP67 Built-Tough The V10MR is built to exceed military standards specifications (MIL-SPEC). It passed multiple drop tests from 1.5m on six kinds of surfaces to ensure durability during operation. With a strong waterproof rating, use the V10MR in rainstorms. You can also rinse out the radio from any dirt and debris. Emergency Ready Come prepared to alert your team with several of the built-in emergency call functions. When pressed, the orange button automatically sends out an emergency call to other radios. Other functions include Lone Worker, Man Down, and Motion Detection. Lone Worker: When a user does not respond back for a certain period of time. Man Down: When a user has fallen and the radio remains horizontal. Motion Detection: When the radio detects sudden or strenuous movements. Other Features: 1500 mW loudspeaker VOX function for hands-free operation

F38B-19 Multi-Use Utility Pump - Capacity 9GPM / 35 L/MIN With their high level of flexibility, the DC driven pumps from SPXFLOW Johnson Pump are ideally suited for use in boats as bilge pumps, deck wash pumps, fresh water pumps and refuelling pumps for oil and diesel. Not to be used for pumping paraffin or other thin petroleum products. These pumps may be combined with a vacuum switch for automatic operation. Not to be used for pumping paraffin or other thin petroleum products. Perfect for bilge pumping, deck wash, water circulation, oil and diesel refueling at dockside service, etc. The motor has a built-in thermal overload for added protection. Features: Limited 3 Year Warranty Typical applications: Bilge pump, fresh water pump, deck washing, fuel oil transfer, fire pump, oil change pump, etc. Oil-resistant impeller Self-priming Easy maintenance Handle debris (bilge pumping) Self-priming All motors are heavy duty to provide long service life even under heavy use Available in 12 or 24 volts Specifications: Body: Bronze Impeller: 09-824P-9 Seal: Lip seal Connection:  Hose 1" / +" NPT Length: 180 mm - 7" Width:  120 mm - 4.72" Height:  90 mm - 3.54" Weight:  3 kg - 6.6 lbs

1" Ball "Light Use" Flat Surface Mount f/Raymarine Dragonfly The RAM-B-101-RYM1 consists of (2 quantity) 2.5" diameter round bases that contains the universal AMPS hole pattern and standard length double socket arm. Included are (3 quantity) (#8-32 x 3/4" PH PD Mach Screws) and (3 quantity) (#8-32 SS Nylock Nuts) that will connect the RAM-B-101-RYM1 to the bottom of all Raymariner Dragonfly Sonar/GPS devices. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm, allowing for almost infinite adjustment and perfect viewing angles. This is a drill-down mounting solution. Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber "B" Ball Size Note: Part number reflects product packaged in clear clam shell for store shelf display.

1" Ball "Light Use" Composite Mount f/Lowrance Elite-4 & Mark-4 Series Fishfinders The RAP-B-101U-LO11 consists of a composite 2.5" diameter round base with the universal AMPS hole pattern, composite double socket arm and adapter base that inserts directly to the back of Lowrance Elite-4 and Mark-4 Fishfinders. The adapter serves as a quick release mechanism, allowing you to remove or transfer your Fishfinder in seconds. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at both socket ends of the arm; this with RAM's rubber ball and socket technology allows for almost infinite adjustment and perfect viewing angles. Material: High Strength Composite Ball Size: 1" Rubber "B" Ball Size Note: The "U" in the part number reflects product packaged in poly bag. RAM recommends this mount for "Light Use" mounting applications, including light weight Lowrance Elite and Mark Fishfinders.

As the Fall months creep into our calendars, boat owners in cooler climates acknowledge, with sadness, that it’s time to put the boat away. Outside Storage? It’s a thought and an option but consider that you may be threatened by snow build up, tornadoes or hurricanes. The success of storing your boat outside depends on how well your boat is protected from the conditions outdoors.                          Rinse/Flush Rinsing the outside of your boat and trailer thoroughly with fresh water will remove excess salt. Pay particular attention to your trailer’s leaf springs, wheel hubs and brakes that are constantly submerged during launching and retrieval of your boat. Flush your engine's cooling system with fresh water in line with your engine manufacturer’s salt removal recommendations. This will minimize corrosion and overheating issues come spring. Drain your boat of all water – bilge, head, sink lines, water tanks, sea-cocks, and pipes. If you are in an area with extended periods of freezing, put antifreeze in the low parts if there is still some water present. Salt Watch out for salt. Buy a good salt remover to minimize corrosion. Add fuel stabilizer to top off your fuel tanks. Here is one recommended by CLR Marine. Diesel Formula Fuel Stabilizer & Performance Improver - 32oz *Case of 4* STA-BIL Diesel Formula Fuel Stabilizer is a diesel additive that keeps fuel fresh for quick, easy starts and maximized for engine performance. Designed for use with all diesel engines, and all diesel fuels, Sta-Bil Fuel Stabilizer Diesel formula prevents sludge and sediment formation, cleans and lubricates fuel injectors to improve performance and helps remove water. It is safe to use and recommended for use at every fill up, with the 32 ounce bottle treating up to 320 gallons of fuel. Batteries Remove the batteries from your boat and store in your garage or basement. Batteries should be connected to a battery charger that will give them a good charge and one that w automatically switches to a float/trickle charge to keep your batteries topped up. Match your charger to the type of battery you are charging. Using a charger manufactured for lead acid batteries to charge an AGM (absorbent glass mat) battery will cause damage to the battery. If you choose to keep your batteries in the boat, connect a solar trickle charger. These chargers will keep your batteries topped off without the hassle of removing heavy batteries from your boat. Cleaning Clean the exterior with the proper fiber glass or wood cleaner needed for your boat. Bright work can be cleaned by removing the wood or cleaning it as it is - installed. Be careful to not get the wood cleaner onto the deck surfaces. The exterior should be dried with a chamois cloth. Vinyl seat cushions and backs should be cleaned with vinyl cleaner. Hard surfaces inside the vessel can be wiped with all purpose cleaners. End your cleaning with a coat of wax to the exterior and polish. Don’t forget the bottom paint. Before you store, spend the time to give your boat a thorough cleaning. CLR Marine has many products by trusted brands such as Powerhouse, Davis Instruments, Jabsco, Shurhold, and Swobbit, to help winterize and clean. You will be grateful in the spring during launch time that your boat is already clean as the new boating season begins. Cover Up If you store outside in your yard, driveway, or a boat yard, a boat cover is a must to prevent damage from winter conditions. Leaving your boat in the water is not recommended. The boat is exposed to rough weather, and has a greater possibility of sinking if you aren’t monitoring it often. https://www.clrmarine.com/462m4/boat-outfitting/winter-covers.html and https://www.clrmarine.com/462m4/winterizing.html Circle May 21, 2022, on your calendar. The date is almost ten days before Memorial Day, next year when most harbors open for the season. Start your prep work, tune-ups, sanding, and painting to get out on the water and a great boating season. In the meantime, during the cold winter months, cozy up to the fire and read your boating manuals, new safety regulations and weather information. Fair winds and smooth sailing.   To obtain more information about the products and services mentioned in this article, please get in touch with CLR Marine https://www.clrmarine.com/. _________________________________________________________________________ Award-winning author Cheryl Kuba has been at the helm for more than 30 years sailing the Great Lakes, with side trips to the British Virgin Islands and St. Maarten. She has served as past- Commodore of Great Lakes Fleet 21 -Chicago region. 3happycampers.com ©Copyright Cheryl Kuba, 3happycampers.com, 2021.  

ProSport Cup Holder Power Inverter Up to 150 Watts of AC Power Fully Automatic, Electronic Power Inverters Converts 12-volt battery power to 110V AC up to 150 watts. Extruded aluminum case High surge capacity Power/status LED indicators Standard 110v AC receptacle Output short and input polarity protection Low battery shutdown Over-temperature and overload protection WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.