|
Winterizing Your Boat
When the boating season is winding down, it's time to start thinking about protecting your valuable recreational asset. The time and effort you spend now will have a definite effect on your boat's performance, or lack of it, and certainly save you time, effort and money come spring. You should remember that your insurance policy may not cover damage done by lack of maintenance or neglect.
The best place for your boat to be during the winter is out of the water, under cover, in a climate-controlled boat storage area. This, however, can be expensive. If don't have this option perhaps you should consider shrink-wrapping your boat. This, too, is a little expensive but provides a very protective cover. Short of these two items, make sure that your boat is well covered with a tarp or some other sturdy cover.
Your first step in winterizing should be to make a checklist of all items that need to be accomplished. Check the owner's manual of both your boat and motor for manufacturer's recommendations on winterization. If you are a new boat owner, perhaps you should employ the assistance of a friend with experience in winterizing or hire a professional to do the job.
CLR Marine sells the winterizing products you will need for winter storage and regular maintence of your boat.
Specials Closeouts Remanufactured Rebates
|
|
|
Wired Shore Power Sensor Plug
The Shore Power Sensor Plug allows boaters to monitor system-critical shore power from anywhere. Receive an alert in the event that shore power is lost and avoid costly system shutdown. The Shore Power Sensor Plug is ideal for larger vessels relying on external power sources to run critical systems while on the dock.
Specifications:
Dimensions: 3ft (wire) 2.5x1.5in (body)
Standard AC to DC adapter, 3V DC output
Plugs into AC outlet
Works with MTC and Siren 3 Pro
|
87.35 |
|
|
Shore Power Relay - 240V
The 240VAC Shore Power Relay is used to detect presence and loss of AC shore power. The relay is meant to be hardwired directly to your AC distribution panel. This relay is the hard wired alternative to the Siren Marine Shore Power Sensor Plug for boats with 240VAC systems.
Features:
Coil Voltage: 240VAC
Contact Current: 10A
Works with MTC and Siren 3 Pro
|
122.29 |
|
|
120V AC Shore Power Relay - Wired
The 120VAC Shore Power Relay is used to detect presence and loss of AC shore power. The relay is meant to be hardwired directly to your AC distribution panel.
This relay is the hard wired alternative to the Siren Marine Shore Power Sensor Plug for boats with 120VAC systems.
Features:
Coil Voltage: 120VAC
Contact Current: 10A
|
83.60 |
|
|
Shore Power Clips - 4-Pack
The safe and reliable way to secure electrical shore power cords in high traffic areas. Easy to install and use, the Shore Power Clip is designed to hold a sturdy 30 Amp marine power cord in its' low profile "toe-friendly" shape.
|
7.55 |
|
|
OnDeck™ Shore Power Sensor
Monitor the status of your shore power remotely using the OnDeck™ Hub and this sensor. Connect this accessory to an electrical outlet and your OnDeck Hub to get started. Compatible with North America, Europe, U.K., and Australia standard electrical outlets from 100 Vac to 240 Vac.
|
44.99 |
|
|
100 Amp 120/208V 4-Pole, 5-Wire Shore Power Cable - No Neutral Wire - 75'
All Marinco cordsets are made of the highest quality, marine grade construction with features you won’t find on other power cords.
Features:
For use with 100 amp 120V/208V shore power systems
High visibility, 2 AWG, flexible yellow STOW cable is oil, water, UV resistant, and rated to 221°F (105°C)
Ergonomic non-slip TPE coated gripping surfaces
IEC pin and sleeve plugs and connectors are designed for harsh environments, watertight, and corrosion resistant. Feature integrated locking rings.
Internal frame terminals provide high clamping force for safe and secure contact
Options for use with on-board isolation transformers and male plug only power supply purposes
UL and ABYC approved components
Specifications:
Length: 75'
Neutral Wire: No
Female End: Yes
Application: Isolation transformer cordset
Color: Yellow
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
3621.65 |
|
|
100 Amp 120/208V 4-Pole, 5-Wire Shore Power Cable - No Neutral Wire - 100'
All Marinco cordsets are made of the highest quality, marine grade construction with features you won’t find on other power cords.
Features:
For use with 100 amp 120V/208V shore power systems
High visibility, 2 AWG, flexible yellow STOW cable is oil, water, UV resistant, and rated to 221°F (105°C)
Ergonomic non-slip TPE coated gripping surfaces
IEC pin and sleeve plugs and connectors are designed for harsh environments, watertight, and corrosion resistant. Feature integrated locking rings.
Internal frame terminals provide high clamping force for safe and secure contact
Options for use with on-board isolation transformers and male plug only power supply purposes
UL and ABYC approved components
Specifications:
Length: 100'
Neutral Wire: No
Female End: Yes
Application: Isolation transformer cordset
Color: Yellow
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
3843.73 |
|
|
100 Amp 120/208V 4-Pole, 5-Wire Shore Power Cable - No Neutral Wire - One-Ended Male Only Cord - Blunt Cut - 125'
All Marinco cordsets are made of the highest quality, marine grade construction with features you won’t find on other power cords.
Features:
For use with 100 amp 120V/208V shore power systems
High visibility, 2 AWG, flexible yellow STOW cable is oil, water, UV resistant, and rated to 221°F (105°C)
Ergonomic non-slip TPE coated gripping surfaces
IEC pin and sleeve plugs and connectors are designed for harsh environments, watertight, and corrosion resistant. Feature integrated locking rings.
Internal frame terminals provide high clamping force for safe and secure contact
Options for use with on-board isolation transformers and male plug only power supply purposes
UL and ABYC approved components
Specifications:
Length: 125'
Neutral Wire: No
Female End: No, Blunt Cut
Application: Cable Winch with Isolation Transformer
Color: Yellow
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
3316.82 |
|
|
100 Amp 125/250V 3-Pole, 4-Wire Shore Power Cordset - Neutral Wire - One-Ended Male Only - Blunt Cut - 75'
All Marinco cordsets are made of the highest quality, marine grade construction with features you won’t find on other power cords.
Features:
For use with 100 amp 125V/250V shore power systems
High visibility, 2 AWG, flexible yellow STOW cable is oil, water, UV resistant, and rated to 221°F (105°C)
Ergonomic non-slip TPE coated gripping surfaces
IEC pin and sleeve plugs and connectors are designed for harsh environments, watertight, and corrosion resistant. Feature integrated locking rings.
Internal frame terminals provide high clamping force for safe and secure contact
Options for use with on-board isolation transformers, male plug only power supply, and extension purposes
UL and ABYC approved components
Specifications:
Length: 75'
Neutral Wire: Yes
Female End: No, Blunt Cut
Application: Cable Winch
Color: Yellow
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
2704.48 |
|
|
100 Amp 120/208V 4-Pole, 5-Wire Shore Power Cable - No Neutral Wire - One-Ended Male Only Cord - Blunt Cut - 100'
All Marinco cordsets are made of the highest quality, marine grade construction with features you won’t find on other power cords.
Features:
For use with 100 amp 120V/208V shore power systems
High visibility, 2 AWG, flexible yellow STOW cable is oil, water, UV resistant, and rated to 221°F (105°C)
Ergonomic non-slip TPE coated gripping surfaces
IEC pin and sleeve plugs and connectors are designed for harsh environments, watertight, and corrosion resistant. Feature integrated locking rings.
Internal frame terminals provide high clamping force for safe and secure contact
Options for use with on-board isolation transformers and male plug only power supply purposes
UL and ABYC approved components
Specifications:
Length: 100'
Neutral Wire: No
Female End: No, Blunt Cut
Application: Cable Winch with Isolation Transformer
Color: Yellow
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
2870.32 |
|
|
Shore Power Cord Holder
Features:
15 degrees bent butt
Perfect for holding your shore power cord or hose while cleaning boat.
Easily stowable, portable, and great for travel
Constructed of anodized aluminum
Fits standard 1-5/8” rod holders
|
107.59 |
|
|
Marine Shore Power Adapter Pigtail L5-30P Male to 5-15R Female
Pigtail shore power 30A to 15A dogbone adapter power cord twist lock L5-30P male to 5-15R female with an LED indicator.
Heavy Duty Over Molded Construction:
Custom grip for comfort
Marine quality
5-year warranty
Led indicator
Female Connector:
15/250A 125V straight blade
Attaches to a cordset or boat inlet
Male Plug:
30A 125V locking
Attaches to dockside receptacle/cordset
Specifications:
Weight: 1.6 lbs
Dimensions: 12 × 6 × 3 in.
|
32.88 |
|
|
100 Amp 125/250V 3-Pole, 4-Wire Shore Power Cordset - Neutral Wire - Female End - 75'
All Marinco cordsets are made of the highest quality, marine grade construction with features you won’t find on other power cords.
Features:
For use with 100 amp 125V/250V shore power systems
High visibility, 2 AWG, flexible yellow STOW cable is oil, water, UV resistant, and rated to 221°F (105°C)
Ergonomic non-slip TPE coated gripping surfaces
IEC pin and sleeve plugs and connectors are designed for harsh environments, watertight, and corrosion resistant. Feature integrated locking rings.
Internal frame terminals provide high clamping force for safe and secure contact
Options for use with on-board isolation transformers, male plug only power supply, and extension purposes
UL and ABYC approved components
Specifications:
Length: 75'
Neutral Wire: Yes
Female End: Yes
Application: Standard Cordset
Color: Yellow
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
3556.98 |
|
|
30A 125V Shore Power Cord - Gray - 25'
Features:
Heavy duty, flexible marine grade cable
Power indicator light
Corrosion resistant, nickel plated contacts
Watertight molded plug and connector
Contour grip with thumbprint locator
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
87.07 |
|