|
JMP Marine MCSSET0008 Mechanical Seal
|
35.95 |
|
|
JMP Marine JSM0024 Minor Service Kit
Services Pump: JPR-JD25UH John Deere Replacement Pump
JSM0024 JMP Marine John Deere Engine Cooling Raw Water / Seawater Pump Minor Service Kit
Please Note:
JSM0024 used ONLY for pump JPR-JD25UH
Cannot be used in Genuine OEM Pumps. Internal changes made to pump parts for better quality and performance vs OEM.
Kit Includes:
7400-01 (FLEXIBLE IMPELLER) - QTY:1
MCSSET0008 (MECHANICAL SEAL SET) - QTY:1
ORG0013 (END COVER O-RING) - QTY:1
COV0003 (END COVER) - QTY:1
BOL0080 (END COVER SCREWS) - QTY:6
WER0001 (WEAR PLATE) - QTY:1
CAMSET000301 (CAM SET) - QTY:1
SNP0006 (SNAP RING) - QTY:1
Services JMP Marine Engine Coolling Raw Water / Seawater Pump:
JPR-JD25UH John Deere Replacement Pump
|
148.73 |
|
|
JMP Marine MCSSET0020 Mechanical Seal
Services Pumps: JPR-WB08IP, JPR-YM08IH, JPR-YM08IH2
MCSSET0020 JMP Marine Engine Cooling Raw Water Mechanical Seal Set
Services JMP Marine Engine Cooling Seawater Pumps:
JPR-WB08IP Westerbeke Replacement Pump
JPR-YM08IH Yanmar Replacement Pump - 2GMF, 3GMF, 2YM, 3YM
JPR-YM08IH2 Yanmar Replacement Pump - 2GM, 3GM
|
32.52 |
|
|
JMP Marine MCSSET0017 Mechanical Seal
|
34.65 |
|
|
JMP Marine MCSSET0018 Mechanical Seal
|
28.32 |
|
|
JMP Marine JSK0080 Cummins Engine Cooling Seawater Pump Major Service Kit
Replaces Cummins 4930629, John Deere DZ108626, Sherwood 25045.
Services Pumps: JPR-C1100, Cummins 3349392, 4929178, 5260393, JPR-JD60IF2, John Deere DZ108620, Sherwood G2910X
JSK0080 JMP Marine Cummins Engine Cooling Raw Water / Seawater Pump Major Service Kit
Replacement and Equivalent to:
Cummins Kit 4930629
John Deere Kit DZ108626
Sherwood Kit 25045
Please Note:
JSK0080 includes all internal parts for full entire rebuild of pump vs Cummins kit 5260396 which has less parts. You get ALL PARTS with JMP Marine kits! Parts are fully compatible to genuine and can be used to service both JMP Marine pumps JPR-C1100, JPR-JD60IF2 along with Genuine OEM pumps!
Kit Includes All Internal Parts for full rebuild:
8359-01 (FLEXIBLE IMPELLER) - QTY:1
CAMSET0032 (CAM SET) - QTY:1
MCSSET0019 (MECHANICAL SEAL SET) - QTY:1
SHA0093 (SHAFT) - QTY:1
ORG0055 (O-RING) - QTY:1
ORG0054 (O-RING) - QTY:1
RET0042 (OIL SEAL) - QTY:1
COV0041 (BEARING COVER) - QTY:1
BER0052 (BEARING) - QTY:2
WER0020 (WEAR PLATE) - QTY:1
COV0038 (END COVER) - QTY:1
SNP0013 (SNAP RING) - QTY:1
BOL0036 (SPRING WASHER) - QTY:5
BOL0007 (END COVER BOLT) - QTY:5
Services JMP Marine & OEM Genuine Engine Cooling Raw Water / Seawater Pumps:
JPR-C1100 Cummins Replacement Pump
JPR-JD60IF2 John Deere Replacement Pump
|
961.73 |
|
|
JMP Marine Engine Cooling Raw Water Pump JPR-JD25UH
Product Information & Specs:
Uses JMP Flexible Impeller p/n: 7400-01K
Port Type: 1" Pipe
Pump Weight (approx): 6.25 LBS (3.85 KG)
Shaft Type: Spline Drive (9 Splines)
Heavy Duty Marine Grade Casting
Marine Grade Shaft (3X Series Non-Magnetic)
Screw with Hex Head / Driver
O-Ring End Cover Packing
High Performance Impeller
High Flow Capacity
Fast Flow Velocity
Forged Cam
This JMP Pump Replaces the following pumps
Replaces Genuine John Deere Pump p/n(s): RE535944, RE503068, RE525563
Replaces Johnson Pump p/n(s): 10-24753-01, 10-24907-01 (F7B-9)
Replaces Onan Pump p/n: 132-0435
For John Deere Engine Model(s): 4045DFM50, 4045DFM70, 4045TFM50, 4045TFM75, 4045TFM85, 6068SFM50,6068TFM50, 6068TFM75, 6068TFM76
Fits Kohler Engine Model(s): 40E02/33EF02, 65E02/55EF02, 30E02/20EF02, 99E02/80LF02
Internally Parts are Compatible to Genuine: NO Changes have been made to End Cover, O-Ring for Cover,Cover Screw, Cam, Wear Plate, Oil Seal, Mechanical Seal, Shaft for Better Quality & Performance
Major Service Kit (All Internal Parts): JSK0076 (Sold Separately)
Minor Service Kit: JSM0024 (Sold Separately)
|
518.99 |
|
|
JMP Marine JSK0029 Caterpillar Major Service Kit
Services Pumps: JPR-CT3306, Caterpillar 5N9357, Jabsco 17810-1000, 17810-1300
JSK002901 can be used to service both JMP Marine & OEM Genuine Pumps. All parts are fully compatible to Genuine.
Kit Includes (All Internal Parts):
8100-01 (FLEXIBLE IMPELLER) - QTY:1
COV0006 (END COVER PLATE) - QTY:1
GAK0007 (END COVER GASKET) - QTY:1
BOL0099 (END COVER HEX SCREWS) - QTY:5
CAMSET00502 (Old #CAMSET00501) (CAM SET) - QTY:1
MCSSET0003 (MECHANICAL SEAL SET) - QTY:1
SHA0050 (SHAFT) - QTY:1
RET0011 (OIL SEAL, RETAINER) - QTY:1
SNP0005 (SNAP RING) - QTY:1
SNP0013 (SNAP RING) - QTY:1
BER0036 (BEARING) - QTY:1
SLI0003 (SLINGER) - QTY:1
WER0009 (WEAR PLATE) - QTY:1
|
542.59 |
|
|
JMP Marine JSK005202 Service Kit MTU Ser 2000
Services 00011970/73, MDEC, M90 Series
Replacement To:
MTU2000 Pump p/n 00011970/73 MDEC, M90 Series
Please Note:
#JSK005202 parts are fully compatible to Genuine OEM.
Kit Includes:
*Does not included bronze impeller (sold separately); please refer to #IMP0052.
BER0040 (BEARING) - QTY:1
BER0041 (BEARING) - QTY:1
MCSSET001501 (MECHANICAL SEAL SET) - QTY:1
ORG0036 (O-RING) - QTY:1
ORG002901 (O-RING) - QTY:1
PBC0136 (OIL SEAL CASE / HOUSING) - QTY:1
SHA0068 (SHAFT) - QTY:1
RET0032 / RET0033 (RETAINER) - QTY:1
SNP0019 (SNAP RING) - QTY:1
SPC0022 (SHIM) - QTY:1
SPC0024 (SPACER) - QTY:1
|
1592.78 |
|
|
JMP Marine JSK0124 Major Service Kit
Services Pumps: JPR-CT3412, Caterpillar 7C3613, 3N7790, OR7720
Please Note:
JSK0124 can be used to service both JMP Marine & OEM Genuine Pumps. All parts are fully compatible to Genuine.
Kit Includes (All Internal Parts):
BER0037 (BALL BEARING) - QTY:1
BER0038 (BALL BEARING) - QTY:1
BOL0058 (FLAT WASHER) - QTY:1
BOL0076 (LOCK NUT) - QTY:1
BOL0097 (COTTER PIN) - QTY:1
*Part of Seal Kit #JMK0002
BOL0110 (SLOTTED NUT) - QTY:1
BOL0111 (LOCK WASHER) - QTY:1
BOL0112 (FLAT WASHER) - QTY:1
BOL0113 (HEX BOLT) - QTY:1
IMP0026 (BRONZE IMPELLER) - QTY:1
KEY0017 (KEY) - QTY:1
MCSSET0009 (MECHANICAL SEAL SET) - QTY:1
*Part of Seal Kit #JMK0002
NIP0008 (DRAIN PLUG) - QTY:1
PORT001G (PLATE, PORT) - QTY:2
ORG0023 (O-RING, PORT PLATE) - QTY:2
ORG0024 (O-RING, BEARING HOUSING) - QTY:1
ORG0029 (O-RING) - QTY:1
*Part of Seal Kit #JMK0002
RET0020 (OIL SEAL) - QTY:1
*Part of Seal Kit #JMK0002
RIG0001 (DISTANCE RING) - QTY:1
SHA0084G (SHAFT) - QTY:1
SNP0016 (SNAP RING) - QTY:1
SNP0018 (SNAP RING) - QTY:1
SPC0003 (SPACER) - QTY:1
*Part of Seal Kit #JMK0002
SPC0005 (SPACER) - QTY:1
SPC0006 (SPACER) - QTY:1
SPC0007 (SHIM) - QTY:1
SPC0008 (SHIM) - QTY:1
|
2702.89 |
|
|
JMP Marine JSM0007 Minor Service Kit
Services Pumps: JPR-CT3306, JPR-V2000, Caterpillar 5N9357, Jabsco 17810-1000, 17810-1300, Volvo Penta 822787, 3829311, Johnson 10-21915-01
Please Note:
JSM0007 can be used to service both JMP Marine & OEM Genuine Pumps. All parts are fully compatible to Genuine.
Kit Includes:
8100-01 (FLEXIBLE IMPELLER) - QTY:1
COV0006 (END COVER PLATE) - QTY:1
GAK0007 (END COVER GASKET) - QTY:1
BOL0099 (END COVER HEX SCREWS) - QTY:5
CAMSET00502 (replaces #CAMSET00502) (CAM SET) - QTY:1
MCSSET0003 (MECHANICAL SEAL SET) - QTY:1
WER0009 (WEAR PLATE) - QTY:1
|
198.55 |
|
|
JMP Marine JSM0032 Minor Service Kit
Services Pump: JPR-V5000 Volvo Penta Replacement Pump
Please Note:
#JSM0032 used Only for pump JPR-V5000. Cannot be used to service Genuine Volvo Penta Pump.
Internal changes made to pump parts for better quality and performance vs OEM
Kit Includes:
8301-01 (FLEXIBLE IMPELLER) - QTY:1
MCSSET0006 (MECHANICAL SEAL SET) - QTY:1
ORG0015 (END COVER O-RING) - QTY:1
COV0005 (END COVER) - QTY:1
BOL0081 (END COVER SCREWS) - QTY:5
CAMSET0025 (CAM SET) - QTY:1
SNP0008 (SNAP RING) - QTY:1
WER0009 (WEAR PLATE) - QTY:1
|
293.75 |
|
|
JMP Marine JSM0081 Minor Service Kit
Services Pumps: JPR-VP0030DB, Volvo Penta 21379102
Please Note:
JSM0081 can be used to service both JMP Marine & OEM Genuine Pumps. All parts are fully compatible to Genuine.
Kit Includes:
7136-01 (FLEXIBLE IMPELLER) - QTY:1
BOL00164 (PLATE WASHER) - QTY:1
SNP0006 (SNAP RING) - QTY:1
ORG0069 (O-RING) - QTY:1
MCSSET0016 (MECHANICAL SEAL SET) - QTY:1
|
65.20 |
|
|
JMP Marine MCSSET0007 MECHANICAL SEAL KIT
|
85.54 |
|
|
JMP Marine 7400-01K Impeller Kit With Gasket & O'Ring
Kit Includes:
7400-01 (Impeller) QTY:1
GAK0016 (Gasket) QTY:1
GAK0062 (Gasket) QTY:1
ORG0013 (O-Ring) QTY:1
ORG0022 (O-Ring) QTY:1
Lubricant
Impeller Dimensions & Specs:
A (Impeller Dia) 65mm
B (Impeller Width) 50mm
C (Shaft Dia) 16mm
No. of Blades: 8
Insert Type: Spline Drive(12)
Replacement and Equivalent to the following Impellers:
Cummins 650607
Caterpillar 2637536, 263-7536
Detroit Diesel 5193602, 5196629
Doosan 65.06084-0003
Jabsco 920-0001
Johnson 09-1028B, 09-1028B-1, 09-1028BT-1
John Deere RE49490
Kohler 352122
Northern Lights 25-11011
Onan 132-0436
Perkins 0460024, 24880031, 24880178
Sherwood 18200, 18200K
Sierra 23-3308, 23-3309 (*does not include screws or rubber seals)
Volvo Penta 801277, 825941, 877061, 875593, 3841697, 20799057, 21422647, 21951356
Yanmar 123325-42020, 127610-42200, 127610-42270, 120650-42310
Nikkiso F20CBC
Kashiyama SP-70
JMP Marine Pumps Using This Impeller:
JPR-CT0440 (Caterpillar Replacement)
JPR-CT3054 (Caterpillar Replacement)
JPR-JD25UH (John Deere Replacement)
JPR-VP0040DB (Volvo Penta Replacement)
JPR-VP0050D (Volvo Penta Replacement)
JPR-V1000 (Volvo Penta Replacement)
JPR-NL20IP (Northern Lights Replacement)
JPR-M25IP (Multi-Purpose Electro-Magnetic Clutch Pump)
JPR-25UP (Multi-Purpose Electro-Magnetic Clutch Pump)
|
29.28 |
|