|
Heavy-Duty 110V Electric Air Pump with 5 Tips
Features:
Includes 5 Tip Options
Heavy-Duty
Electric Air Pump
110V
Color: Blue
|
31.67 |
|
|
PIRANHA™ Straight Port Aerator 600 Livewell Pump - 12 VDC, 600 GPH
Smart. Reliable. Attractive. Efficient. Our tough density nylon housing and heavy duty water cooled motor give the SHURFLO livewell pumps unparalleled reliability. Anti-airlock feature allows the pump to clear trapped air in rough water or when the boat is anchored. The dual port fitting allows for easy washdown connections. These aerator pumps have a removable cartridge for easy cleaning.
Features:
Submersible
Anti-Airlock
Removable Cartridge
High Density Nylon Housing
Heavy Duty Water Cooled Motor
Tinned 6' Wire Assembly
Includes Hex Nut & Washer
Ignition Protected
ISO 8846
2 Year Warranty
CE Listed
|
57.79 |
|
|
PIRANHA™ Straight Port Aerator 800 Livewell Pump - 12 VDC, 800 GPH
Smart. Reliable. Attractive. Efficient. Our tough density nylon housing and heavy duty water cooled motor give the SHURFLO livewell pumps unparalleled reliability. Anti-airlock feature allows the pump to clear trapped air in rough water or when the boat is anchored. The dual port fitting allows for easy washdown connections. These aerator pumps have a removable cartridge for easy cleaning.
Features:
Submersible
Anti-Airlock
Removable Cartridge
High Density Nylon Housing
Heavy Duty Water Cooled Motor
Tinned 6' Wire Assembly
Includes Hex Nut & Washer
Ignition Protected
ISO 8846
2 Year Warranty
CE Listed
|
61.37 |
|
|
PIRANHA™ Straight Port Aerator 1100 Livewell Pump - 12 VDC, 1100 GPH
Smart. Reliable. Attractive. Efficient. Our tough density nylon housing and heavy duty water cooled motor give the SHURFLO livewell pumps unparalleled reliability. Anti-airlock feature allows the pump to clear trapped air in rough water or when the boat is anchored. The dual port fitting allows for easy washdown connections. These aerator pumps have a removable cartridge for easy cleaning.
Features:
Submersible
Anti-Airlock
Removable Cartridge
High Density Nylon Housing
Heavy Duty Water Cooled Motor
Tinned 6' Wire Assembly
Includes Hex Nut & Washer
Ignition Protected
ISO 8846
2 Year Warranty
CE Listed
|
67.66 |
|
|
PIRANHA™ Angled Port Aerator 600 Livewell Pump - 12 VDC, 600 GPH
Smart. Reliable. Attractive. Efficient. Our tough density nylon housing and heavy duty water cooled motor give the SHURFLO Livewell Pumps unparalleled reliability. Anti-airlock feature allows the pump to clear trapped air in rough water or when the boat is anchored. The dual port fitting allows for easy washdown connections. These aerator pumps have a removable cartridge for easy cleaning.
Features:
Submersible
Anti-Airlock
Removable Cartridge
High Density Nylon Housing
Heavy Duty Water Cooled Motor
Includes Hex Nut & Washer
Ignition Protected
ISO 8846
2 Year Warranty
CE Listed
|
57.79 |
|
|
PIRANHA™ Angled Port Aerator 800 Livewell Pump - 12 VDC, 800 GPH
Smart. Reliable. Attractive. Efficient. Our tough density nylon housing and heavy duty water cooled motor give the SHURFLO Livewell Pumps unparalleled reliability. Anti-airlock feature allows the pump to clear trapped air in rough water or when the boat is anchored. The dual port fitting allows for easy washdown connections. These aerator pumps have a removable cartridge for easy cleaning.
Features:
Submersible
Anti-Airlock
Removable Cartridge
High Density Nylon Housing
Heavy Duty Water Cooled Motor
Includes Hex Nut & Washer
Ignition Protected
ISO 8846
2 Year Warranty
CE Listed
|
61.37 |
|
|
PIRANHA™ Ballast 800 Pump - 12 VDC, 800 GPH
Everything you are looking for in a ballast pump. Our tough, high density nylon housing and heavy duty water cooled motor give the PIRANHA ballast pumps unparalleled reliability. Anti airlock feature allows the pump to clear trapped air. All ballast series pumps have a removable cartridge for easy cleaning and ease of replacement.
Features:
Flow Rate 800 GPH
Replaceable Cartridge
Tough Nylon Construction
Anti-Air Lock Feature
Tinned 6 Feet Wire Assembly
CE, Ignition Protected ISO 8846
|
56.36 |
|
|
Gianneschi ACB80E-110V Bronze 110V 1Ph 60Hz Self-Prime
Gianneschi ACB80E-110V, ACB Series Self Priming Liquid Ring Pump and Motor unit, Bronze construction, Brass impeller, 316 Stainless Steel Shaft. Motor is 0.37kW (0.5 Horsepower), 2900 RPM, 110 Volts AC, Single Phase. Inlet Port is 3/4 Inch, Discharge Port is 3/4 Inch.
Applications for the ACB80E110V include the pumping of liquids with high gas content or seawater, as well as in chain washing, oli and diesel, fire fighting, bilges, and water supplying.
|
1403.99 |
|
|
PIRANHA™ Ballast 1100 Pump - 12 VDC, 1100 GPH
Everything you are looking for in a ballast pump. Our tough, high density nylon housing and heavy duty water cooled motor give the PIRANHA ballast pumps unparalleled reliability. Anti airlock feature allows the pump to clear trapped air. All ballast series pumps have a removable cartridge for easy cleaning and ease of replacement.
Features:
Flow Rate 1100 GPH
Replaceable Cartridge
Tough Nylon Construction
Anti-Air Lock Feature
Tinned 6 Feet Wire Assembly
CE, Ignition Protected ISO 8846
|
61.37 |
|
|
Heavy Duty Positive Displacement Vane Pump - 12V
GROCO Vane Pumps are self-priming and are capable of operation in either direction. Relatively high flow (more than gear pumps) makes them suitable for general purpose duties such as deck-wash, bilge pumping (filtered inlet), fuel transfer, ballast transfer, and oil change. All models have an ignition protected motor and #316 stainless steel shaft.
Specifications:
Self Priming: YES
Thread NPT: 1/2" + Garden Hose Adaptor
Control Type: None
Max GPM: 6.5
Breaker DC: 30 Amp
|
408.67 |
|
|
Heavy Duty Positive Displacement Vane Pump - 24V
GROCO Vane Pumps are self-priming and are capable of operation in either direction. Relatively high flow (more than gear pumps) makes them suitable for general purpose duties such as deck-wash, bilge pumping (filtered inlet), fuel transfer, ballast transfer, and oil change. All models have an ignition protected motor and #316 stainless steel shaft.
Specifications:
Self Priming: YES
Thread NPT: 1/2" + Garden Hose Adaptor
Control Type: None
Max GPM: 6.5
Breaker DC: 15 Amp
|
415.33 |
|
|
Gianneschi CP26-A1-110V 60HZ Bronze Self Priming Pump
Gianneschi CP-26-A1-110V, CP Series Self Priming Liquid Ring Pump and Motor unit, Bronze construction, Bronze impeller, 316 Stainless Steel Shaft. Motor is 0.37KW (0.5 Horsepower), 1450 RPM, 110 volts AC, 60 Hz, Single Phase. Inlet Port is 1 Inch, Discharge Port is 1 Inch.
Pump Body: Bronze
Impeller: Bronze
Shaft: 316 Stainless Steel
Port Size: Inlet Port is 1 Inch, Discharge Port is 1 Inch
Motor Specs :0.37KW (0.5 Horsepower), 1450 RPM, 110 volts AC, 60 Hz, Single Phase.
|
1643.02 |
|
|
12" x 12" Heavy Duty Performance Trim Tab Kit w/o Switch Kit -12V
Lenco Electric Heavy Duty Polished Blade Trim Tab Kits are supplied with electric actuators for precise control. Fully submersible with all Plug & Play Deutsch connections. Blades are Electro-Polished 12 gauge - 304 SS with 1" turned up edges, 85 degree inside taper and 1/4" diameter hinge pin. Kits equipped with Extreme Duty actuators with 5/16" SS bolts. Kit is factory assembled with full transom back plate, mechanical strain relief cable seal, adjustable C-channel mounting brackets and 3.75" sacrificial anodes. .
Kit Contents:
2 each of 12-gauge stainless steel Electro-Polished trim tab blades
2 each of #15055-001 XD extreme duty actuators with 6' lead and Deutsch plugs
2 each of #30133-103 20' actuator extension wiring harnesses
1 each of the Lenco owner’s / installation manual
Boat-mounting hardware supplied by customer
Specifications:
Suggested Boat Length: 18' to 34'
Length of Tab: 12"
Width of Tab: 12"
Minimum Transom Height: 10.5"
Blades: 12 Gauge Stainless Steel
Finish: Electro-Polished
Switch Kit: Sold Separately
Class: Fuel Efficient
Compliance: CE Certified
Compatibility: Any Boat
Switch Required: 15069-001 or 15070-001
Actuators: 12-volt
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1089.46 |
|
|
16" x 12" Heavy Duty Performance Trim Tab Kit w/o Switch Kit -12V
Lenco Electric Heavy Duty Polished Blade Trim Tab Kits are supplied with electric actuators for precise control. Fully submersible with all Plug & Play Deutsch connections. Blades are Electro-Polished 12 gauge - 304 SS with 1" turned up edges, 85 degree inside taper and 1/4" diameter hinge pin. Kits equipped with Extreme Duty actuators with 5/16" SS bolts. Kit is factory assembled with full transom back plate, mechanical strain relief cable seal, adjustable C-channel mounting brackets and 3.75" sacrificial anodes. .
Kit Contents:
2 each of 12-gauge stainless steel Electro-Polished trim tab blades
2 each of #15055-001 XD extreme duty actuators with 6' lead and Deutsch plugs
2 each of #30133-103 20' actuator extension wiring harnesses
1 each of the Lenco owner’s / installation manual
Boat-mounting hardware supplied by customer
Specifications:
Suggested Boat Length: 20' to 38'
Length of Tab: 16"
Width of Tab: 12"
Minimum Transom Height: 10.5"
Blades: 12 Gauge Stainless Steel
Finish: Electro-Polished
Switch Kit: Sold Separately
Class: Fuel Efficient
Compliance: CE Certified
Compatibility: Any Boat
Switch Required: 15069-001 or 15070-001
Actuators: 12-volt
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1198.50 |
|
|
18" x 14" Heavy Duty Performance Trim Tab Kit w/o Switch Kit -12V
Lenco Electric Heavy Duty Polished Blade Trim Tab Kits are supplied with electric actuators for precise control. Fully submersible with all Plug & Play Deutsch connections. Blades are Electro-Polished 12 gauge - 304 SS with 1" turned up edges, 85 degree inside taper and 1/4" diameter hinge pin. Kits equipped with Extreme Duty actuators with 5/16" SS bolts. Kit is factory assembled with full transom back plate, mechanical strain relief cable seal, adjustable C-channel mounting brackets and 3.75" sacrificial anodes. .
Kit Contents:
2 each of 12-gauge stainless steel Electro-Polished trim tab blades
2 each of #15055-001 XD extreme duty actuators with 6' lead and Deutsch plugs
2 each of #30133-103 20' actuator extension wiring harnesses
1 each of the Lenco owner’s / installation manual
Boat-mounting hardware supplied by customer
Specifications:
Suggested Boat Length: 22' to 42'
Length of Tab: 18"
Width of Tab: 14"
Minimum Transom Height: 10.5"
Blades: 12 Gauge Stainless Steel
Finish: Electro-Polished
Switch Kit: Sold Separately
Class: Fuel Efficient
Compliance: CE Certified
Compatibility: Any Boat
Switch Required: 15069-001 or 15070-001
Actuators: 12-volt
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1250.47 |
|