|
1-2 Rider Watermelon Island Towable
This towable is built for high performance and speed out on the water.
Features:
Lay-on construction fits 1-2 riders
Nylon cover with comfort chafe pad
Quick connect adapter for the tow rope
6 comfort grip handles
1 valve/chamber
Technical Specifications:
Inflated size - 70" (L) x 70" (W)
|
118.15 |
|
|
Single Rider Watermelon Tube Towable
This towable is built for high performance and speed out on the water.
Features:
All nylon cover
Quick connect adapter for the tow rope
4 comfort grip handles
1 valve/chamber
Technical Specifications:
Inflated size - 48" (L) x 48" (W)
|
70.96 |
|
|
1-2 Rider Lay-On Swan Towable
This towable is built for high performance and speed out on the water.
Features:
Lay-on construction fits 1-2 riders
Nylon cover with comfort chafe pad
Quick connect adapter for the tow rope
6 comfort grip handles
2 valves/chambers
Technical Specifications:
Inflated size - 82" (L) x 84" (W) x 44" (H)
|
217.31 |
|
|
1-2 Rider Lay-On Flamingo Towable
This towable is built for high performance and speed out on the water.
Features:
Lay-on construction fits 1-2 riders
Nylon cover with comfort chafe pad
Quick connect adapter for the tow rope
6 comfort grip handles
2 valves/chambers
Technical Specifications:
Inflated size - 78" (L) x 82" (W) x 54" (H)
|
216.43 |
|
|
Ampco Pumps P1GXPIP-1/2 Plastic Cap Plug
|
3.65 |
|
|
Ampco Pumps KC2 2 1/2 X 2 Fluid End Nialbz 5.00" Trim
|
3440.34 |
|
|
Bosworth 400-H-Ale-1/2"F Guzzler 1/2" Hand Pmp,Tappd
Bosworth Hand Diaphragm Pump Guzzler Delrin, .44Qt per Stroke, 1/2" Female Threaded Ports, Buna Flapper Valves and Diaphragm, Horizontal Handle with Epoxy Coated Aluminum Clamp Ring for Durability
|
108.13 |
|
|
March 893-11-1/2 +Pump/12V Mtr 1/2"Ports
This item is 'build to order'. Please contact us for lead time.
|
383.19 |
|
|
BURKS T350G6-1 1/2, CENTRIFUGAL PUMP 3PH 5HP TEFC
Close Coupled, 60 Hz, Three Phase, 3500 RPM, 5 Horsepower, TEFC Motor Enclosure, Frame Size 184JM
UNSPSC Code: 40150000
|
3661.31 |
|
|
Fill-Rite 901-1 1/2 Flow Meter
Fill-Rite Flow Meter 6-40GPM Nickel Plated 1 1/2”FNPT Ports
|
465.21 |
|
|
BURKS 350G6-1 1/2, Centrifugal Pump 230/460v 3PH 5HP
Bronze Fitted Cast Iron Construction.
Close Coupled to a 5 Horsepower, 3450 RPM, 230/460 Volts, 3 Phase Motor.
Ports are 2 Inches NPT Inlet, 1-1/2 Inches NPT Outlet. Impeller Diameter is 5.88 Inches.
UNSPSC Code: 40150000
|
3253.35 |
|
|
Fill-Rite 901-N-1 1/2 901 Meter Nickel Plated 1.5
Fill-Rite Flow Meter 6-40GPM 1 1/2"FNPT Ports
|
548.25 |
|
|
BURKS GNB6-1-1/2-6.25 CENTRIFUGAL PUMP
BURKS Model: GNB6-1-1/2-6.25
Burks Frame Mounted End Suction GNB Series Pump
Bronze Fitted, 6.25" Bronze Impeller
2" Suction & 1 1/2" Discharge
Carbon / Ceramic / SS Buna-N Shaft Seal
Maximum Temperature of 225°F (107°C)
Application: Waste Treatment and Plating
Ships Via Truck please us the Contact Us page to get a Freight Quote.
|
3273.19 |
|
|
Applications for the March AC-1A-MD-1/2 Magnetic Drive Pump include chemical transfer, photographic processing equipment, refrigeration systems, and water displays.
The AC-1A-MD-1/2 Part # 0115-0064-0100 has pumped Acetone, Ammonium Chloride, Ammonium Chloride, Ammonium Hydroxide, Citric Acid, Ethylene Glycol, Magnesium Nitrate, Potassium Carbonate, Sodium Borate, Fresh Water, Salt Water, and many more chemicals. The AC-1A-MD-1/2 may have been modified to handle these chemicals.
March Pump's industrial AC-1A-MD-1/2 is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation and chemical transfer. It is capable of generating a maximum flow of 3 gallons per minute at 0.25 feet, and its maximum head is 4.6 Feet (or around 2PSI). The standard wet end (the materials that come into contact with the solution) is composed of Polypropylene, Buna N, Nylon, Carbon/Teflon, Stainless Steel, and Ceramic Magnet. The inlet connection is 0.5 inch smooth, and the outlet is 0.5 inch smooth. The standard motor is a 1 Phase 115V or 230V 0.05 Horsepower motor, which can be run on 60 hertz on 115V or 50 and 60 hertz on 230V (there are performance differences between the hertz options). The maximum internal pressure the pump can tolerate is 50PSI, and the maximum liquid temperature is 190 Fahrenheit or 87 Celsius. The March AC-1A-MD-1/2 centrifugal magnetic drive pump is capable of handling mildly or highly corrosive chemicals, acids, and solvents.
Unit System 60Hz 50Hz Max Flow
3 GPM
9 LPM
Max Head
4.6 FT
1 M
Power
.005 HP
.003 KW
Electrical
115V 60HZ 230V 50/60HZ
Type
Centrifugal Mag Drive
Inlet
1/2"OD
Outlet
1/2"OD
Wet End
Polypropylene (Front and Rear Housing), Buna N (O-Ring), Nylon (Impeller), Carbon/Teflon (Thrust Washer), 316 Stainless Steel (Shaft), Ceramic Magnet
Part # 0115-0064-0100
|
224.25 |
|
|
Applications for the March AC-1A-MD-1/2 Magnetic Drive Pump include chemical transfer, photographic processing equipment, refrigeration systems, and water displays.
The AC-1A-MD-1/2 Part # 0115-0064-0200 has pumped Acetone, Ammonium Chloride, Ammonium Chloride, Ammonium Hydroxide, Citric Acid, Ethylene Glycol, Magnesium Nitrate, Potassium Carbonate, Sodium Borate, Fresh Water, Salt Water, and many more chemicals. The AC-1A-MD-1/2 may have been modified to handle these chemicals.
March Pump's industrial AC-1A-MD-1/2 is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation and chemical transfer. It is capable of generating a maximum flow of 3 gallons per minute at 0.25 feet, and its maximum head is 4.6 Feet (or around 2PSI). The standard wet end (the materials that come into contact with the solution) is composed of Polypropylene, Buna N, Nylon, Carbon/Teflon, Stainless Steel, and Ceramic Magnet. The inlet connection is 0.5 inch smooth, and the outlet is 0.5 inch smooth. The standard motor is a 1 Phase 115V or 230V 0.05 Horsepower motor, which can be run on 60 hertz on 115V or 50 and 60 hertz on 230V (there are performance differences between the hertz options). The maximum internal pressure the pump can tolerate is 50PSI, and the maximum liquid temperature is 190 Fahrenheit or 87 Celsius. The March AC-1A-MD-1/2 centrifugal magnetic drive pump is capable of handling mildly or highly corrosive chemicals, acids, and solvents. To determine if the March AC-1A-MD-1/2 is suitable for your application, please contact March Pump.
Unit System 60Hz 50Hz Max Flow
3 GPM
9 LPM
Max Head
4.6 FT
1 M
Power
.005 HP
.003 KW
Electrical
115V 60HZ 230V 50/60HZ
Type
Centrifugal Mag Drive
Inlet
1/2"OD
Outlet
1/2"OD
Wet End
Polypropylene (Front and Rear Housing), Buna N (O-Ring), Nylon (Impeller), Carbon/Teflon (Thrust Washer), 316 Stainless Steel (Shaft), Ceramic Magnet
Part # 0115-0064-0200
|
202.80 |
|