|
Motor Mount for Voyager/Outdoorsman Series Inflatable Boats
Compatible with Voyager 400/800 and Outdoorsman 31400/31600 series inflatable boats.
|
59.77 |
|
|
Voyager 2-Person Inflatable Boat Kit with Oars and Pump
Inflatable fishing boat ideal for protected waters and up to three people. Four-chamber, double hull, heavy-duty construction with I-beam flooring. Accepts up to 2 HP motors with optional #30050 motor mount (not included). Integrated with bow handle, grab lines, and swivel oar locks.
Features:
360 lbs weight capacity
4 chamber, double hull heavy-duty construction with I-beam flooring
Inflatable bolster seat(s) included
Fishing rod holder
Handle and grab lines
Swivel oar locks
In the Box:
Boat
Oars
Pump
|
52.81 |
|
|
Voyager 3-Person Inflatable Boat
Inflatable fishing boat ideal for protected waters and up to three people. Four-chamber, double hull, heavy-duty construction with I-beam flooring. Accepts up to 2 HP motors with optional #30050 motor mount (not included). Integrated with bow handle, grab lines, and swivel oar locks.
Features:
600 lbs weight capacity
4 chamber, double hull heavy-duty construction with I-beam flooring
Inflatable bolster seat(s) included
Fishing rod holder
Handle and grab lines
Swivel oar locks
|
56.62 |
|
|
Voyager 3-Person Inflatable Boat Kit with Oars & Pump
Inflatable fishing boat ideal for protected waters and up to three people. Four-chamber, double hull, heavy-duty construction with I-beam flooring. Accepts up to 2 HP motors with optional #30050 motor mount (not included). Integrated with bow handle, grab lines, and swivel oar locks.
Features:
600 lbs weight capacity
4 chamber, double hull heavy-duty construction with I-beam flooring
Inflatable bolster seat(s) included
Fishing rod holder
Handle and grab lines
Swivel oar locks
In the Box:
Boat
Oars
Pump
|
70.93 |
|
|
Voyager 4-Person Inflatable Boat
Inflatable fishing boat ideal for protected waters and up to three people. Four-chamber, double hull, heavy-duty construction with I-beam flooring. Accepts up to 2 HP motors with optional #30050 motor mount (not included). Integrated with bow handle, grab lines, and swivel oar locks.
Features:
750 lbs weight capacity
4 chamber, double hull heavy-duty construction with I-beam flooring
Inflatable bolster seat(s) included
Fishing rod holder
Handle and grab lines
Swivel oar locks
|
83.46 |
|
|
Voyager 4-Person Inflatable Boat Kit with Oars & Pump
Inflatable fishing boat ideal for protected waters and up to three people. Four-chamber, double hull, heavy-duty construction with I-beam flooring. Accepts up to 2 HP motors with optional #30050 motor mount (not included). Integrated with bow handle, grab lines, and swivel oar locks.
Features:
750 lbs weight capacity
4 chamber, double hull heavy-duty construction with I-beam flooring
Inflatable bolster seat(s) included
Fishing rod holder
Handle and grab lines
Swivel oar locks
In the Box:
Boat
Oars
Pump
|
93.76 |
|
|
Voyager 6-Person Inflatable Boat
Inflatable fishing boat ideal for protected waters and up to three people. Four-chamber, double hull, heavy-duty construction with I-beam flooring. Accepts up to 2 HP motors with optional #30050 motor mount (not included). Integrated with bow handle, grab lines, and swivel oar locks.
Features:
1150 lbs weight capacity
4 chamber, double hull heavy-duty construction with I-beam flooring
Inflatable bolster seat(s) included
Fishing rod holder
Handle and grab lines
Swivel oar locks
|
112.39 |
|
|
Stern Rail Outboard Aluminum Motor Mount f/1-1/4" Railings
Built to hold motors up to 100lbs/45 kg (about 15 hp). Convenient cleat and side handles allow you to tie the motor and lock it safely on board. The non-corroding polished 316 stainless bracket with non-skid pad, bolted to the UV stable poly backing board always looks ship-shape… no more varnishing. Comes complete with hardware to attach to any 1-1/4” (3.2cm) stainless rail. Bottom cleat comes unattached so that it will fit any rail spacing.
Note: 1-1/4” rail version comes complete with anodized aluminum bracket, stainless cleat and stainless U-bolt for 1-1/4” railing. Wt. 10 lb (4.5 kg).
|
505.80 |
|
|
2018 Jeep Wrangler JL Fog Mount f/2 D-Series Lights
RIGID Fog Mounts for the 2018 Jeep Wrangler JL stand alone when it comes to auxiliary lighting on and off the road. These mounts give that sleek OEM look but add the incredible look and functionality of the RIGID brand. This mount fits the RIGID D-Series and mounts in the existing OEM location.
These mounts are made from laser cut stainless steel and have been powder coated allowing for a clean sleek look. Own The Night with the RIGID mounts for your Jeep Wrangler JL.
Lights sold separately.
In the Box:
All Necessary Hardware
∗ Sold as a Pair
|
163.79 |
|
|
RAM Flat Surface Waterproof Mount f/Garmin Montana® Series
This RAM high strength composite cradle is designed to hold the following devices:
Garmin Montana 600
Garmin Montana 650
Garmin Montana 650t
Features:
1. Open access to all electronic ports and camera
2. Patent pending roller design for super smooth placement and removal of the GPS
Material:
High strength composite
|
37.01 |
|
|
RAM Handlebar/Rail Mount f/Garmin Montana® Series
Included is mounting hardware that will accommodate rails from 0.5" to 1.25" in diameter.
This RAM high strength composite cradle is designed to hold the following devices:
Garmin Montana 600
Garmin Montana 650
Garmin Montana 650t
Features:
1. Open access to all electronic ports and camera
2. Patent pending roller design for super smooth placement and removal of the GPS
Material:
High strength composite
|
43.88 |
|
|
Trolling Motor Mount f/GT36 and GT56
Easily attach your compatible 4- or 8-pin scanning transducer to the trolling motor of your boat with this mount. Its low-profile design provides ultimate protection from underwater obstructions and easy mounting.
|
22.49 |
|
|
Trolling Motor Mount for MK, Garmin, Rhodan, & Power Pole
The Sea Swivel is a heavy-duty marine-grade pivoting bracket designed to maneuver a trolling motor in the correct position while being deployed. This bracket also has the benefit of being able to adjust the stowed position to match the angle of any boat. That means no more anchor hatches covered up and no more trolling motorheads hanging off the side of the boat. All that is needed is an 8" x 8" flat mounting surface and access under the gunwale to tighten the nut. During installation, it is recommended that users apply teff-gel or marine-grade grease to the main bolt threads and the bearing assembly.
Features:
Maneuverability and Positioning
The Sea Swivel offers a heavy-duty pivoting bracket that allows users to easily maneuver the trolling motor into the correct position while deployed. This is especially useful for maintaining proper control and direction while fishing or navigating in different conditions.
Adjustable Stowed Position
The ability to adjust the stowed position of the trolling motor to match the angle of the boat is a significant advantage. This means that the trolling motor won't interfere with anchor hatches or hang off the side of the boat when not in use, enhancing the boat's aesthetics and functionality.
High-Quality Materials
The use of 7075T6 aluminum alloy, commonly found in the aerospace industry, provides peak strength and ensures the Sea Swivel's durability. This material choice suggests that the product is designed to withstand the rigors of marine environments and provide longevity.
Corrosion Resistance
The anodized finish is designed to protect the Sea Swivel from the harsh marine environment, which typically includes exposure to saltwater and other corrosive elements. This coating enhances the product's ability to resist rust and other forms of corrosion over time.
Stainless Lock Pin and Hardware
The utilization of all 316 stainless lock pins and mounting hardware further enhances the product's resistance to corrosion, as 316 stainless steel is known for its exceptional corrosion resistance properties, making it well-suited for marine applications.
Backing Plate for Strength
The inclusion of a pre-cut backing plate to be placed under the mounting surface is a smart design choice. This additional plate strengthens the installation area, reducing the risk of damage or failure due to stress or strain over time.
Easy Installation
The patent-pending design and single-bolt mounting system contribute to streamlined installation processes. This can be a significant selling point for customers, as it saves time and effort during setup.
*It is recommended that users apply teff-gel or marine-grade grease to the main bolt threads and the bearing assembly.
Compatibility
The Sea Swivel stands out as a versatile solution seamlessly accommodating many makes, models, and sizes of trolling motors. It makes installation a breeze and comes pre-drilled for the quick-release brackets listed below:
Minn Kota RTA 54/62 (fits all 36V permanent magnet motors)
Minn Kota RTA 55/56 (fits all new Brushless/Quest motors)
Minn Kota RTA17 (fits all 24V motors for smaller units)
Also fits quick-release mounts for the *Garmin Kraken 24v/36v
Rhodan large mount 6 bolt 36v 96/108
Rhodan smaller mount 4 bolt 24v
Power Pole Move PV 36V/24V
Lifetime Warranty
Sea Swivel offers a limited lifetime warranty.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1318.80 |
|
|
2018 Jeep Wrangler JL Cowl Mount f/2 D-Series
The Jeep Wrangler is one of the most versatile off-road vehicles ever created and when traveling off the beaten path lighting has never been more important. Enter the RIGID Cowl Mount for the 2018 Jeep Wrangler JL.
This mount has the ability to support not one, but two lighting options from the RIGID D-Series family all while allowing the Jeeps windshield to fold if desired.
These mounts are made from laser cut stainless steel and have been powder coated allowing for a clean sleek look. Own The Night with the RIGID mounts for your Jeep Wrangler JL.
Lights sold separately.
In the Box:
All necessary hardware
∗ Sold as a Pair
|
232.10 |
|
|
2018 Jeep Wrangler JL A-Pillar Mount for 2 D-Series, D-SS, SR-M or Ignite Lights
The 2018 Jeep Wrangler JL can go anywhere that you can take it, shouldn’t its auxiliary lighting options do the same? The all new Wrangler JL A-Pillar mount by RIGID gives that extra lighting needed for those dark times.
With the ability to attach several different RIGID lighting options from the D-Series, D-SS, SR-M, or Ignite families, the RIGID Jeep Wrangler A-Pillar mount takes auxiliary lighting to a new level. These mounts are made from laser cut stainless steel and have been powder coated allowing for a clean sleek look. Own The Night with the RIGID mounts for your Jeep Wrangler JL.
Lights sold separately.
In the Box:
All Necessary Hardware
∗ Sold as a Pair
|
112.50 |
|