|
Maxi Bellows Foot Pump
Easy to use foot-operated pump. Can be used for all inflatables with multi-purpose adapters. Separate inflate & deflate ports with hose included. Folds flat for compact easy storage.
Features:
For all inflatables
Inflates and deflates
Complete with multi-use adapters
Folds flat for storage
|
11.08 |
|
|
Mega Super Sized Bellows Foot Pump
Easy to use foot-operated pump. Supersized for maximum air capacity. Can be used for all inflatables with multi-purpose adapters. Separate inflate & deflate ports with hose included. Folds flat for compact easy storage.
Features:
Supersized for maximum air capacity
For all inflatables
Inflates and deflates
Reinforced bellows
Complete with multi-use adapters
Folds flat for storage
|
14.80 |
|
|
Durango 1-2 Person Kayak Kit
11' x 37.5" - The Solstice Durango 1-2 Person Inflatable Kayak is a multi-sport kayak that can easily convert from a 2 to 1-person kayak by simply removing one of the included seats. Built with a heavy-duty inner bladder and a nylon fabric reinforced cover – the Durango is a strong and durable kayak ready for any adventure. It’s 3-chamber design and high-pressure floor gives it a 440 lb capacity. Comes equipped with 2 grab handles, screw-style drain valves, front & rear spray covers, storage bungees, velcro paddle-holders, and 22 reinforced D-Ring tie-down locations. The Durango comes with a removable skeg for ultimate tracking when paddling.
Features:
440 lbs max capacity
22 gauge K-80 PVC interior construction with fabric-reinforced nylon cover
Durable 1000 Denier PVC bottom
Easily converts from 1 to 2-person configurations
2 sturdy adjustable nylon-covered bucket seats
Directional strakes and skeg
Heavy-duty D-ring tie-downs
Bow and stern covers with bungee cords
Boston valves for quick inflate/deflate
Technical Specifications:
Weight - 33 lbs
Folded size - 23" x 18" x 8"
Weight capacity - 440 lbs
In the Box:
Kayak
5-piece adjustable paddle
Carry-bag
(2) Removable bucket seats
Bellows foot pump
Removable skeg
Repair kit
|
488.17 |
|
|
Gianneschi MAXI SUB Bilge Pump 230/50
Submersible Bilge Pump for seawater and grey water.
Maxi Sub
230v 50 Hz - 0,18 kW
Max flow: 180 L/min @ 2 m
Max head: 8 m @ 30 L/min
Outlet: 1", female (vertical)
Stainless steel shaft (AISI 316) ; ABS open impeller
Diameter: 230 mm
Height: 350 mm
IP rating : IP68
|
504.36 |
|
|
Gianneschi MAXI SUB 24V Submersible Pump 24V
Submersible Bilge Pump for seawater and grey water
Maxi Sub - 24volt
Voltage: 24 V
Power: 0,18 kW
Max flow: 180 L/min @ 2 m
Max head: 8m @ 30 L/min
Outlet: 1", female (vertical)
Stainless steel shaft (AISI 316) ; ABS open impeller
Diameter: 180 mm
Height: 290 mm
IP rating : IP68
|
888.68 |
|
|
Flojet Et508-221A W/Feet Pump Osc 115V Hp Epdm
|
119.34 |
|
|
No matter whether you are an experienced boater looking for a replacement pump or a manufacturer specifying pumps for your marine application, we are prepared to provide you with the support you need. And no matter where you work or live, access to our products, services, spare parts and support are never far away. In fact, you will find SPX FLOW's Johnson Pump marine brand represented in every major industrial country of the world today and in more than sixty nations altogether.
SHOP JOHNSON PUMP
The Aqua Jet five chamber diaphragm pump provides the perfect water pressure or deck wash solution for both small and medium sized leisure and commercial boats as well as mobile homes, campers and summer homes.
Quiet and pulsation-free even at low speeds. Efficient and compact, Aqua Jet pumps are particularly suitable where low amperage and sound levels in relation to water flow are placed at a premium-such as in shower and galley applications. Integrated pressure switch turns pump on and off automatically when tap is opened and closed. Operates in fresh or sea water.
SHOP THE Aqua Jet five chamber diaphragm pump
Specials Closeouts Remanufactured Rebates
|
|
|
SeaLand VG4 J Series 24V Pump Replacement 385311230
Pump assembly for the VG4 (Vacuum generator 4)
This assembly includes the following items:
Pump to tank seal
2" Duckbills (4)
2" Check valve adapter
Transition adapter 2" to 1.5"
Pump mounting hardware
Pump body
Pump o'ring kit
Bellows
Bellows clamps
Bellows bushing
Eccentric
Pump top closure
Motor
Pump cover
|
1268.59 |
|
|
Bellows S/T Pump Kit
Dometic Bellows assembly for the S-Vacuum pump, VG4-Vacuum pump and the T-Discharge pump.
*This does not include the O-rings (P/N 385310151)
Features:
Toilet flush ball kit
Color - White
*Sold as an Individual
WARNING: This product can expose you to chemicals including ARSENIC which is known to the State of California to cause cancer or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
147.83 |
|
|
Oberdorfer 300B Series Self Priming Centrifugal Pump
FEATURES
Pump Body:
Bronze
Ports:
1" NPT
Flow:
22 GPM Max
Pressure:
15 PSI Max, 35 feet of head
Impeller:
Centrifugal
Shaft Seal:
Mechanical Buna Seal Standard, Viton or Teflon Optional
Shaft:
Stainless Steel Standard, Monel Optional
Motor / Drive:
Attaches to NEMA C flange jet pump motors with threaded shaft of stainless steel or monel. We can supply additional motors and assemble if required.
APPLICATIONS / CHARACTERISTICS
This close coupled style bronze self-priming centrifugal pump is equipped with high quality ball bearings permanently filled with grease for maintenance free operation. The main shaft seal is a mechanical face type seal of proven reliability. Unlike positive displacement pumps centrifugal pumps have larger internal clearances as the pressure is generated by centrifugal force and high liquid velocity. These pumps can handle impurities in the liquid and the flow in the discharge line may be throttled or shut off without the need for a relief valve.
FEATURES
Self-Priming to 20 Feet Suction Lift
Rugged Bronze Construction
Ideal for marine service (air conditioning, bilge, and sea water recirculating).
O-Ring Housing seal eliminates gasket problems
Auxiliary Connections - for convenient priming and draining
Multiple Mechanical Shaft Seal Options -for various applications
Pump Heads mount to Standard Footed Nema 56J Jet Pump Motors
Shafts : 416 Stainless, Nickel Alloy, or 316 Passivated Stainless
Multiple motor options including Explosion Proof
For Pedestal Style, see 30PB
Optional Lifting Handle
DRIVE
Centrifugal pumps are designed for single rotation and are non reversible. Standard rotation is counter clockwise looking at the pump inlet port (clockwise facing pump shaft). Close coupled centrifugal pumps may be driven by a variety of power sources such as electric motors, hydraulic motors or air motors. Self priming centrifugal pumps must be operated in the horizontal position.
LIQUIDS & TEMPERATURES
Capacity - Water 60o F - Gallons Per Minute
Maximum lift without foot valve is 10 feet.
Bronze pumps are suitable for most common liquids in the pH range from 4-11. If in doubt consult with factory or check the Oberdorfer™ Chemical Resistance Guide booklet. The temperature limit for bronze pumps is 212F. Higher temperatures are possible with fluoroelastomer or Polytetrafluoroethylene (PTFE) seals. Centrifugal pumps are not well suited for pumping viscous liquids. Viscosities up to 2000 SSu may be handled resulting in reduced performance and efficiency.
Pump seal is mechanical carbon face type mated to ceramic wear face for maximum durability. Other seal components are made of Nitrile with low swell characteristics for compatibility with a wide range of liquids including many chemicals and solvents.
SUCTION LIFT
Up to 22 gallons per minute water flow and suction lift of 15 feet without a foot or check valve (25 foot suction lift using a foot or check valve and a filled inlet line). A 1/2” pipe plug on the tank top is for initial filling of priming chamber and inlet line--pump priming is automatic thereafter.
300B is Oberdorfers - Self Priming Centrifugal Pump Head Only Bronze
|
1139.40 |
|
|
Babyfoot Manual Galley Foot Operated Pump
Whale's manual galley pumps are truly design classics. Since the 1960s these manual pumps have been designed, refined and manufactured by our skilled UK based workforce.
Self-priming foot pump designed for easy installation and use.
Features
Simple foot operated solution for pumping water in the galley
Smooth and easy operation
Comfortable to use - angled top section
Compact for installing in confined spaces
Ideal as a priming pump for use with Whale in line impeller electric pumps
The ideal foot pump for a simple freshwater system
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
46.55 |
|
|
2-Stage High Volume High-Pressure Digital Pump with Car/Battery Adapter Kit
The fastest way to inflate HPI items to full pressure. Two separate ports for inflation and deflation. LED digital gauge display & auto-stop function when set to desired PSI. Equipped with 12V DC accessory outlet cable & car battery adapter kit. The nozzle is compatible with HR valves only. Maximum pressure of 20 PSI.
Features:
The fastest way to inflate HPI items to full pressure
Automatic inflate and deflate functionality
LED digital gauge and auto-stop function
Equipped with 12V accessory outlet cable and car battery adapter kit
Compatible with HR valves only
20 PSI max pressure
|
149.29 |
|
|
Gusher Foot Operated Galley Pump Right Handed Lever
Whale's manual galley pumps are truly design classics. Since the 1960s these manual pumps have been designed, refined and manufactured by our skilled UK based workforce.
The simple solution for fresh water dellivery in small galleys.
Features
Smooth double action
Self primes and operates dry without damage
Easy, smooth hands free operation
Ease of installation- Multi-directional inlet and outlet hose connections
3 mounting options (including thru bulkhead)
Left and right oriented foot lever versions available
Also ideally used to prime Whale In-Line Booster pumps
Pumps fresh and salt water 15 ltrs (4 US gals) per minute
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
104.96 |
|
|
Gusher Foot Operated Galley Pump Left Handed Lever
Whale's manual galley pumps are truly design classics. Since the 1960s these manual pumps have been designed, refined and manufactured by our skilled UK based workforce.
The simple solution for fresh water dellivery in small galleys.
Features
Smooth double action
Self primes and operates dry without damage
Easy, smooth hands free operation
Ease of installation- Multi-directional inlet and outlet hose connections
3 mounting options (including thru bulkhead)
Left and right oriented foot lever versions available
Also ideally used to prime Whale In-Line Booster pumps
Pumps fresh and salt water 15 ltrs (4 US gals) per minute
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
104.96 |
|
|
Maxi Puppy 3000 12V Flexible Impeller Pump
Maxi Puppy self-priming pump 12VDC. Ports ½” BSP threaded (use ¾” hose adapters), plus connections for 25mm (1”) bore hose.
Features:
Connections: - for 25mm (1”) bore hose or 1/2" BSP
Dimensions: - 220mm long, 120mm wide, 85mm high
Fuse Size: - 25(amp)
Output: - up to 45 litres/minute (10 gallons/minute).
High capacity, continuously rated bilge pump
Self priming up to 2.4m vertical lift
Simple, fully serviceable design with few wearing parts
Can generate pressures up to 1 bar (15 psi)
Bronze body, stainless steel shaft
Packaged Dimensions: L:28.00 x H:13.00 x W:15.00cm
Actual Weight: 3.85 Kg (Approx. 4.35 Kg packed)
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
426.20 |
|