|
Trailer Connector 4 Pole Kit
Trailer plug kit (male & female) 12" & 48"
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
8.27 |
|
|
7 to 4 Trailer Plug Adapter
Sea-Dog's 7 to 4 Adapter for Trailer Plugs.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
13.08 |
|
|
3lb Economy Folding Anchor Kit
Sea-Dog's Economy Folding Anchor Kit includes everything users need to get started. It comes complete with the popular 3.5 lb. folding anchor, 20' of 3/16" line, and a handy mesh bag.
Features:
Constructed of hot-dipped galvanized iron with forged flukes
Specifications:
Size of Hole for Anchor Rope: 1/2 in.
Included Anchor Line: 20 ft.
Weight: 3.5 lbs
|
22.84 |
|
|
Plastic Boat Hook Hull Scraper
Boat Hook Hull Scraper can be attached to any Sea-Dog® Boat Hook/Boat Pole or universal/Acme threaded device. Great for waterline cleaning from inside the vessel and scraping ice from windshields.
Specifications:
Scraper Width: (inch) 6"
Scraper Height: (inch) 3"
|
10.43 |
|
|
Nylon Flagpole Pennant Mounts & Stainless Clips - Pair
The Sea-Dog® Adjustable Rail Mount Flagpole is constructed of highly polished, heavy wall stainless steel tubing with an injection molded nylon rail mount bracket. The flag is attached to the flagpole using nylon adjustable flagpole clips in conjunction with stainless steel, spring wire, quick release clips which allows mounting flexibility for a variety of flag or pennant sizes. For use on either 7/8" or 1" tubing. Maximum speed 10 MPH.
|
8.27 |
|
|
Performance Anchor Trolley Kit
Sea-Dog's Performance Anchor Trolley Kit is an essential tool for the Pro Angler. It features a zig cleat for easy, one-handed adjustability. The durable, one-piece cheek blocks operate silently so users won’t scare fish in the water below. When the need arises to wade through the water, easily unclip the custom-designed ring and use the system as a leash.
Kit Includes:
30' of 3/16" polypro deck line (1)
Zig cleat (1)
Ring clip (1)
Cheek blocks (2)
Nylon pad eyes (6)
10-32 X 3/4" PH machine screws (10)
10-32 Nyloc nuts (10)
#10 flat washers (10)
Well nuts (10)
Features:
Proudly constructed in the USA of injection molded nylon, stainless steel, and polyester
Specifications:
Fasteners Included: Yes
Weight: 0.80 lbs
|
19.03 |
|
|
8' Radar Mast Pole Kit with 2 Strut Kits
Seaview offers a 8' tall Pole Kit for just about any application. This Seaview Pole Kit is equipped with a adjustable base that has a small 5-1/4" x 3" footprint and a water tight Cable Seal, which can be easily disassembled for pole removal.
Features:
Fixed Top Plate - A Seaview Top Plate is included with each pole kit to fit closed dome radars. No longer the unwanted “swiss cheese” look with a Seaview modular top plate. These plates result in only 4 visible mounting screws to secure electronics. A anodized 1/4" thick aluminum plate is pre-drilled to fit most marine electronics. This aluminum plate is then encased in a UV stable glass filled ABS white plastic. Each top plate is dimpled to match the provided drill templates for easy and precise drilling for your specific marine electronic.
Supports - There are several strut supports depending on which Seaview Pole Kit you choose. A rail stand-off kit and a 48" long strut.
48" Struts - Also made from high polished stainless steel are the 48" long struts.
Adjustable Base - A hard anodized adjustable base with a water tight Cable Seal. The adjustable base measures 5-1/4" x 3".
**NON STOCK ITEM DROP SHIPS FROM MANUF. NO PROMO FREIGHT RATES***
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1809.60 |
|
|
8' Pole Kit
Seaview offers a 8' tall Pole Kit for just about any application. This Seaview Pole Kit is equipped with a adjustable base that has a small 5-1/4" x 3" footprint and a water tight Cable Seal, which can be easily disassembled for pole removal.
Features:
Fixed Top Plate - A Seaview Top Plate is included with each pole kit to fit closed dome radars. No longer the unwanted “swiss cheese” look with a Seaview modular top plate. These plates result in only 4 visible mounting screws to secure electronics. A anodized 1/4" thick aluminum plate is pre-drilled to fit most marine electronics. This aluminum plate is then encased in a UV stable glass filled ABS white plastic. Each top plate is dimpled to match the provided drill templates for easy and precise drilling for your specific marine electronic.
Rail Stand-off Kit - The rail stand-off kit includes two turnbuckle style struts that are adjustable from 6" to 12", two stainless steel 3" pole clamps and two stainless steel 1" rail clamps.
Adjustable Base - A hard anodized adjustable base with a water tight Cable Seal. The adjustable base measures 5-1/4" x 3".
**NON STOCK ITEM DROP SHIPS FROM MANUF. NO PROMO FREIGHT RATES***
|
1617.60 |
|
|
8' Starlink Mast Pole Kit with Standoff Kit
Seaview offers an 8' tall Pole Kit for just about any application. This Seaview Pole Kit is equipped with an adjustable base that has a small 5-1/4" x 3" footprint and a water-tight Cable Seal, which can be easily disassembled for pole removal.
The pole itself is 3" in diameter and is made from marine-grade aluminum. Seaview takes the finish to another level by first taking the raw aluminum and putting it through a process called Chem Film. Chem Film is a chemical conversion coating that is used as a light coat of protective covering over aluminum. After the Chem Film process, it is taken through a 3-part epoxy prime and powder coat. This is all done to ensure the best possible finish and corrosion resistance.
Fixed Top Plate
A Seaview Top Plate is included with each pole kit to fit closed dome radars. No longer the unwanted “Swiss cheese” look with a Seaview modular top plate. These plates result in only 4 visible mounting screws to secure electronics. An anodized 1/4" thick aluminum plate is pre-drilled to fit most marine electronics. This aluminum plate is then encased in a UV stable glass filled ABS white plastic. Each top plate is dimpled to match the provided drill templates for easy and precise drilling for your specific marine electronics.
Supports
Several strut supports depending on which Seaview Pole Kit you choose. A rail stand-off kit and a 48" long strut.
Rail Stand-off Kit - The rail stand-off kit includes two turnbuckle style struts that are adjustable from 6" to 12", two stainless steel 3" pole clamps, and two stainless steel 1" rail clamps.
48" Struts - Also made from highly polished stainless steel are the 48" long struts.
Adjustable Base
A hard anodized adjustable base with a water-tight Cable Seal. The adjustable base measures 5-1/4" x 3".
|
1617.60 |
|
|
8' Pole Kit
Seaview offers a 8' tall Pole Kit for just about any application. This Seaview Pole Kit is equipped with a adjustable base that has a small 5-1/4" x 3" footprint and a water tight Cable Seal, which can be easily disassembled for pole removal.
Features:
Fixed Top Plate - A Seaview Top Plate is included with each pole kit to fit closed dome radars. No longer the unwanted “swiss cheese” look with a Seaview modular top plate. These plates result in only 4 visible mounting screws to secure electronics. A anodized 1/4" thick aluminum plate is pre-drilled to fit most marine electronics. This aluminum plate is then encased in a UV stable glass filled ABS white plastic. Each top plate is dimpled to match the provided drill templates for easy and precise drilling for your specific marine electronic.
One 48" Support Strut Kit
1" rail stand-off kit
Adjustable Base - A hard anodized adjustable base with a water tight Cable Seal. The adjustable base measures 5-1/4" x 3".
*Does NOT fit 24" JRC, Lowrance 2400 HD and Simrad DX64S
**NON STOCK ITEM DROP SHIPS FROM MANUF. NO PROMO FREIGHT RATES***
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1924.80 |
|
|
SEA-DOG
Sea-Dog Line carries quality marine gear such as Deck Hardware, Hinges, Lighting, Plumbing, Fishing Equipment, Clamcleats, Chain and Rigging Hardware and more.
|
|
|
4 Pole Plug & Socket Connector with Rubber Cap
Normally used with a trailer where only limited functionality (taillights. brake lights) is needed. Ideal for boat trailers or RVs towing a car on a flatbed trailer.
Features:
Diecast metal housings
Screw terminals accept up to 12 AWG wire.
Replaceable interiors
Brass split-pin contacts are aligned to assure proper contact and minimal voltage drop
Spring-loaded socket doors (the plug locks securely into the opening)
Wiring codes are identified on the insulator
Two mounting holes on the flange are 17/64" (6.7 mm) in diameter. 2-15/16" (74.6 mm) in centers.
Mount through a 1 3/8" (34.9 mm) diameter hole.
With special housing that protects terminals from road splash
Specifications:
Housing: Plated steel
Circuitry: 4
Input Terminals: Brass
Contact Material: Screw
|
20.57 |
|
|
Aluminum Three Piece Boat Pole - 8'
The marine grade aluminum tubing, Acme threaded end attachment and comfort grip handle make for a high quality and durable accessory. Its buoyant design keeps the boat pole afloat for more than 5 minutes. The bright orange rubber tip cover is highly visible and removes for accessory attachment. Fits all Sea-Dog® boat hook accessories.
Dimensions:
Closed: 46"
Open: 96"
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
32.30 |
|
|
Aluminum Boat Hook - 8' - 3-Piece
This Sea-Dog boat hook can grab a line or mooring buoy on board a vessel and ward off other boats or obstructions. An extended hand that prevents users from reaching overboard.
Features:
Small hook
A threaded end attachment and comfortable grip handle
The buoyant design keeps it afloat for more than 5 minutes
The bright orange rubber tip is highly visible and removed for accessory attachment
Fits all Sea-Dog® Boat Hook accessories, as well as any competitor’s accessories featuring universal or Acme threads
Constructed of high-quality, durable marine-grade aluminum tubing with an injection-molded nylon hook
Includes
A four-point hook attachment coated in soft, over-molded rubber protects the boat from scuffs and scratches.
Specifications:
Length: 36 in.
Extended Length: 96 in.
Close Pole Diameter: 1-1/4 in.
Style: 3-piece
|
44.96 |
|
|
Aluminum Boat Hook - 12' - 3-Piece
This Sea-Dog boat hook can grab a line or mooring buoy on board a vessel and ward off other boats or obstructions. An extended hand that prevents users from reaching overboard.
Features:
Small hook
A threaded end attachment and comfortable grip handle
The buoyant design keeps it afloat for more than 5 minutes
The bright orange rubber tip is highly visible and removed for accessory attachment
Fits all Sea-Dog® Boat Hook accessories, as well as any competitor’s accessories featuring universal or Acme threads
Constructed of high-quality, durable marine-grade aluminum tubing with an injection-molded nylon hook
Includes
A four-point hook attachment coated in soft, over-molded rubber protects the boat from scuffs and scratches.
Specifications:
Length: 56 in.
Extended Length: 144 in.
Close Pole Diameter: 1-1/4 in.
Style: 3-piece
|
64.49 |
|