|
STERNPERCH SAILBOAT SEATPADS
The addition of pads to your Sternperch sailboat seats, makes the best seat on the boat, even better.
Seat pad coverings are a Sunsure brand fabric which is an open weave mesh.
All Seat Pads are made at time of order. Please allow about three weeks for delivery.
Sold as a pair.
Available colors: Hunter Green, Khaki, Navy Blue, Royal Blue, and Silver.
|
295.00 |
|
|
STERNPERCH Sailboat Seats
All Seats are made at time of order.
All seats come with integrated drink holders.
Enhanced view from cockpit.
Easily removed for racing.
Every ones favorite seat.
Additional cockpit seating for 2 extra people
Please allow about 2 weeks for delivery.
You get the Following
1 pair of Sternperch Seats
1 pair of White Drink Holder Inserts
1 pair of base flanges and legs
All necessary installation hardware
Here is a list of Boats we made Stern Perch Seats for and to see some pictures click here
IF WE DO NOT HAVE YOUR BOAT LISTED SternPerch PATTERN MAKING INSTRUCTIONS
WE ALSO OFFER Stern Rail and Life Line Cushions Click Here
Only one Stern Rail, here is a solutionThe Rail Kit
Note: All Sternperch Seats are custom made at time of order, Quantity In Stock will show 0
|
327.00 |
|
|
Trailer Cable - 16/4 AWG - Yellow/White/Green/Brown - Flat - 100'
Ancor flat trailer cable features white, green, yellow and brown Marine Grade primary conductors (correctly color-coded to ABYC standards) in a white common jacket that is made for easy removal while providing the best abrasion resistance available. These cables exceed UL 1426 standards and are made from the highest quality ultra flexible (Type 3/Class K) tinned copper stranding that provides maximum protection against corrosion and electrolysis while resisting fatigue due to vibration and flexing. The premium vinyl insulation is rated at 600V, 105°C dry and 75°C wet, stays flexible even in extreme cold (-40°F/C) and resists salt water, battery acid, oil, gasoline, heat, abrasion and ultra-violet radiation.
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
79.18 |
|
|
Trailer Cable - 16/4 AWG - Yellow/White/Green/Brown - Flat - 300'
Ancor flat trailer cable features white, green, yellow and brown Marine Grade primary conductors (correctly color-coded to ABYC standards) in a white common jacket that is made for easy removal while providing the best abrasion resistance available. These cables exceed UL 1426 standards and are made from the highest quality ultra flexible (Type 3/Class K) tinned copper stranding that provides maximum protection against corrosion and electrolysis while resisting fatigue due to vibration and flexing. The premium vinyl insulation is rated at 600V, 105°C dry and 75°C wet, stays flexible even in extreme cold (-40°F/C) and resists salt water, battery acid, oil, gasoline, heat, abrasion and ultra-violet radiation.
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
174.35 |
|
|
1-7/8" Trailer Ball - 3/4" x 1-5/8" Shank - 2,000 lb. Capacity - Chrome
CURT 1-7/8" trailer balls are constructed from high-strength steel to match the towing power of class 1 or class 2 trailer hitch and ball mount and come with fine threads on the shank for improved holding strength. Having a trailer ball that matches your coupler size is absolutely essential. At CURT, the trailer balls are engineered to be precisely fitted. When we stamp 1-7/8" into the top of each hitch ball, we actually mean 1-7/8".
This CURT tow ball features a ball capacity of 2,000 lbs. It is able to tow most utility trailers, boat trailers, campers, smaller livestock trailers, and some recreational vehicle haulers. (NOTE: Never exceed the lowest weight capacity of any towing component, i.e., the vehicle, hitch, trailer, etc.) As with any trailer, be sure that the towing equipment is capable of handling the load before hitching up. This trailer ball also features a 3/4" shank diameter, a 1-5/8" shank length, 0" of rise, and a nickel-chrome finish to protect against corrosion and wear. Like all CURT trailer balls, the 1-7/8" balls are tested for your safety and meet all U.S. VESC specifications.
Features:
It fits 1-7/8" couplers and accepts up to 2,000 lbs. GTW
Constructed from high-strength, hot-forged steel
Protected by a durable chrome-plated finish
Zinc-plated hex nut and helical lock washer for secure mounting
Features fine threads for superior holding strength
Tested for safety to meet U.S. VESC V-5 specifications
Specifications:
Ball Capacity: 2,000 lbs
Ball Diameter: 1-7/8 in.
Finish: Chrome-plated
Hub Warehouse: D25
Material: Forged steel
Shank Diameter: 3/4 in.
Shank Length: 1-5/8 in.
Shank Rise: 0 in.
Torque: 160 ft. lb.
Warranty: Limited lifetime warranty (one-year finish, one-year parts)
*The mounting platform must be at least 3/8 in. thick, and the hole size must not be more than 1/16 in. larger in diameter than the threaded shank
|
10.93 |
|
|
1-7/8" Trailer Ball - 3/4" x 2-1/8" Shank - 2,000 lb. Capacity - Stainless Steel
Out of the monotony comes one name that rises above all others. CURT trailer balls are designed for strength, ease of use, and, ultimately, to get you to your destination without hassle. CURT 2" trailer hitch balls are constructed from quality steel and are made with precision to fit your 2" trailer coupler like a hand in a glove. They are able to tow most standard-duty and heavy-duty trailers, such as utility trailers, boat trailers, campers, livestock trailers, and recreational vehicle trailers for hauling ATVs, snowmobiles, personal watercraft, and more. These tow balls are an excellent extension of your class 3 or class 4 trailer hitch and ball mount and are the ideal choice for most pickup trucks and SUVs. (NOTE: Never exceed the lowest weight capacity of any towing component, i.e., the vehicle, hitch, trailer, etc.)
This CURT tow ball features a ball capacity of 2,000 lbs. It is able to tow most utility trailers, boat trailers, campers, smaller livestock trailers, and some recreational vehicle haulers. (NOTE: Never exceed the lowest weight capacity of any towing component, i.e., the vehicle, hitch, trailer, etc.) As with any trailer, be sure that your towing equipment is capable of handling the load before hitching up. This trailer ball also features a 3/4" shank diameter, a 2-1/8" shank length, 0" of rise, and a stainless steel finish to protect against corrosion and wear. Like all CURT trailer balls, the 1-7/8" balls are tested for your safety and meet all U.S. VESC specifications.
Features:
Fits 1-7/8" couplers and accepts up to 2,000 lbs. GTW
Stainless steel construction for excellent rust resistance
Zinc-plated hex nut and helical lock washer for secure mounting
Features fine threads for superior holding strength
Tested for safety to meet U.S. VESC V-5 specifications
Specifications:
Ball Capacity: 2,000 lbs
Ball Diameter: 1-7/8 in.
Color: Stainless Steel
Finish: Polished stainless
Hub Warehouse: D25
Material: Forged steel
Shank Diameter: 3/4 in.
Shank Length: 2-1/8 in.
Shank Rise: 0 in.
Torque: 160 ft. lb.
Warranty: Limited lifetime warranty (one-year finish, one-year parts)
*The mounting platform must be at least 3/8 in. thick, and the hole size must not be more than 1/16 in. larger in diameter than the threaded shank
|
31.62 |
|
|
2" Trailer Ball - 3/4" x 2-1/8" Shank - 3,500 lb. - Stainless Steel
Out of the monotony comes one name that rises above all others. CURT trailer balls are designed for strength, ease of use, and, ultimately, to get you to your destination without hassle. CURT 2" trailer hitch balls are constructed from quality steel and are made with precision to fit your 2" trailer coupler like a hand in a glove. They are able to tow most standard-duty and heavy-duty trailers, such as utility trailers, boat trailers, campers, livestock trailers, and recreational vehicle trailers for hauling ATVs, snowmobiles, personal watercraft, and more. These tow balls are an excellent extension of your class 3 or class 4 trailer hitch and ball mount and are the ideal choice for most pickup trucks and SUVs. (NOTE: Never exceed the lowest weight capacity of any towing component, i.e., the vehicle, hitch, trailer, etc.)
This particular 2" trailer ball offers a ball capacity of 3,500 lbs. It features a 3/4" shank diameter, a 2-1/8" shank length, 0" of rise, and a stainless steel finish to protect against rust and scratches. With its fine-threaded shank, this 2" trailer ball also offers an added measure of holding strength and provides smooth installation and torquing. To give you peace of mind while towing to that next destination, CURT also carefully tests out the trailer balls and ensures that each one meets U.S. VESC specifications.
Features:
Fits 2" couplers and accepts up to 3,500 lbs. GTW
Stainless steel construction for excellent rust resistance
Zinc-plated hex nut and helical lock washer for secure mounting
Features fine threads for superior holding strength
Tested for safety to meet U.S. VESC V-5 specifications
Specifications:
Ball Capacity: 3,500 lbs
Ball Diameter: 2 in.
Color: Stainless Steel
Finish: Polished stainless
Hub Warehouse: D25
Material: Forged steel
Shank Diameter: 3/4 in.
Shank Length: 2-1/8 in.
Shank Rise: 0 in.
Torque: 160 ft. lb.
Warranty: Limited lifetime warranty (one-year finish, one-year parts)
*The mounting platform must be at least 3/8 in. thick, and the hole size must not be more than 1/16 in. larger in diameter than the threaded shank
|
31.61 |
|
|
1-7/8" Trailer Ball - 3/4" x 1-5/8" Shank - 2,000 lbs. - Chrome
CURT 1-7/8" trailer balls are constructed from high-strength steel to match the towing power of class 1 or class 2 trailer hitch and ball mount and come with fine threads on the shank for improved holding strength. Having a trailer ball that matches the coupler size is essential. At CURT, the trailer balls are engineered to be precisely fitted. When CURT stamps 1-7/8" into the top of each hitch ball, CURT means 1-7/8".
This CURT tow ball features a ball capacity of 2,000 lbs. It can tow most utility trailers, boat trailers, campers, smaller livestock trailers, and some recreational vehicle haulers. (NOTE: Never exceed the lowest weight capacity of any towing component, i.e., the vehicle, hitch, trailer, etc.) As with any trailer, be sure that the towing equipment can handle the load before hitching up. This trailer ball also features a 3/4" shank diameter, a 1-5/8" shank length, 0" of rise, and a nickel-chrome finish to protect against corrosion and wear. Like all CURT trailer balls, CURT's 1-7/8" balls are tested for users’ safety and meet all U.S. VESC specifications.
Features:
Fits 1-7/8" couplers and accepts up to 2,000 lbs. GTW
Constructed from high-strength, hot-forged steel
Protected by a durable chrome-plated finish
Zinc-plated hex nut and helical lock washer for secure mounting
Features fine threads for superior holding strength
Tested for safety to meet U.S. VESC V-5 specifications
Specifications:
Ball Capacity: 2,000 lbs.
Ball Diameter: 1-7/8 in.
Color: Silver
Finish: chrome-plated
Hub Warehouse: D25
Material: Forge steel
Part Type: 1-7/8 in. Trailer ball
Shank Diameter: 0.75 in.
Shank Length: 1-5/8 in.
Shank Rise: 0 in.
Torque: 160 ft. lb.
Warranty: Limited lifetime warranty (one-year finish, one-year parts)
*The mounting platform must be at least 3/8 in. thick, and the hole size must not be more than 1/16 in. larger in diameter than the threaded shank
|
8.68 |
|
|
Trailer Connector-Flat 4-Wire - 12" Loop
Molded trailer connector made in accordance with SAE color coding.
Features:
Male Connector for Trailer Side/Female Connector for Vehicle Side
Loops can be cut to the desired length for splicing into an existing wire assembly
12" Wire Loop - 16 AWG
4-contact connectors are molded with an EasyGrip for fast and easy disconnect
|
4.32 |
|
|
2" Trailer Ball - 3/4" x 1-3/4" Shank - 3,500 lb. Capacity - Chrome
Out of the monotony comes one name that rises above all others. CURT trailer balls are designed for strength, ease of use, and, ultimately, to get you to your destination without hassle. CURT 2" trailer hitch balls are constructed from quality steel and are made with precision to fit your 2" trailer coupler like a hand in a glove. They are able to tow most standard-duty and heavy-duty trailers, such as utility trailers, boat trailers, campers, livestock trailers, and recreational vehicle trailers for hauling ATVs, snowmobiles, personal watercraft, and more. These tow balls are an excellent extension of your class 3 or class 4 trailer hitch and ball mount and are the ideal choice for most pickup trucks and SUVs. (NOTE: Never exceed the lowest weight capacity of any towing component, i.e., the vehicle, hitch, trailer, etc.)
This particular 2" trailer ball offers a ball capacity of 3,500 lbs. It features a 3/4" shank diameter, a 1-3/4" shank length, 0" of rise, and a nickel-chrome finish to protect against rust and scratches. With its fine-threaded shank, this 2" trailer ball also offers an added measure of holding strength and provides smooth installation and torquing. To give peace of mind while towing to that next destination, CURT also carefully tests the trailer balls and ensures that each one meets U.S. VESC specifications.
Features:
It fits 2" couplers and accepts up to 3,500 lbs. GTW
Constructed from high-strength, hot-forged steel
Protected by a durable chrome-plated finish
Zinc-plated hex nut and helical lock washer for secure mounting
Features fine threads for superior holding strength
Tested for safety to meet U.S. VESC V-5 specifications
Specifications:
Ball Capacity: 3,500 lbs
Ball Diameter: 2 in.
Color: Silver
Finish: Chrome-plated
Hub Warehouse: D25
Material: Forged steel
Shank Diameter: 3/4 in.
Shank Length: 1-3/4 in.
Shank Rise: 0 in.
Torque: 160 ft. lb.
Warranty: Limited lifetime warranty (one-year finish, one-year parts)
*The mounting platform must be at least 3/8 in. thick, and the hole size must not be more than 1/16 in. larger in diameter than the threaded shank
|
11.10 |
|
|
2" Trailer Ball - 3/4" x 1-3/4" Shank - 3,500 lbs. - Chrome
Out of the monotony comes one name that rises above all others. CURT trailer balls are designed for strength, ease of use, and, ultimately, to get users to the destination without hassle. CURT 2" trailer hitch balls are constructed from quality steel and are made with precision to fit a 2" trailer coupler like a hand in a glove. The hitch ball is able to tow most standard-duty and heavy-duty trailers, such as utility trailers, boat trailers, campers, livestock trailers, and recreational vehicle trailers for hauling ATVs, snowmobiles, personal watercraft, and more. These tow balls are an excellent extension of class 3 or class 4 trailer hitch and ball mount and are the ideal choice for most pickup trucks and SUVs. (NOTE: Never exceed the lowest weight capacity of any towing component, i.e., the vehicle, hitch, trailer, etc.)
This particular 2" trailer ball offers a ball capacity of 3,500 lbs. It features a 3/4" shank diameter, a 1-3/4" shank length, 0" of rise, and a nickel-chrome finish to protect against rust and scratches. With its fine-threaded shank, this 2" trailer ball also offers an added measure of holding strength and provides smooth installation and torquing. To give peace of mind while towing to that next destination, CURT also carefully tests the trailer balls and ensures that each one meets U.S. VESC specifications.
Features:
Fits 2" couplers and accepts up to 3,500 lbs. GTW
Constructed from high-strength, hot-forged steel
Protected by a durable chrome-plated finish
Zinc-plated hex nut and helical lock washer for secure mounting
Features fine threads for superior holding strength
Tested for safety to meet U.S. VESC V-5 specifications
Specifications:
Ball Capacity: 3,500 lbs.
Ball Diameter: 2 in.
Color: Silver
Finish: Chrome-plated
Hub Warehouse: D25
Material: Forge steel
Part Type: 2 in. Trailer ball
Shank Diameter: 0.75 in.
Shank Length: 1-3/4 in.
Shank Rise: 0 in.
Torque: 160 ft. lb.
Warranty: Limited lifetime warranty (one-year finish, one-year parts)
*The mounting platform must be at least 3/8 in. thick, and the hole size must not be more than 1/16 in. larger in diameter than the threaded shank
|
10.03 |
|
|
Class 3 Ball Mount - 2" Shank - 7,500 lbs - 6" Drop & 9-1/4" Long
CURT class 3, or standard-duty, ball mounts are a step up from classes 1 and 2. They feature a 2" x 2" shank and have a higher weight capacity for towing heavy-duty trailers, including utility trailers, boat trailers, campers, single-horse livestock trailers, and most recreational vehicle trailers. With class 3 trailer hitches being the most common type of trailer hitch for pickup trucks and SUVs, the class 3 ball mount, by association, is an excellent complement to this trailer hitch and these larger vehicles (NOTE: Never exceed the lowest weight capacity of any towing component, i.e., the vehicle, hitch, trailer, etc.).
This particular class 3 ball mount can be used in the drop position to provide a drop of 6", a gross trailer weight capacity of 7,500 lbs., and a tongue weight capacity of 750 lbs. It can also be flipped to provide a rise of 4", a gross trailer weight capacity of 6,000 lbs., and a tongue weight capacity of 600 lbs. It features a length of 9-1/4". Class 3 ball mounts are CNC-formed and robotically welded to ensure unwavering precision and dependable strength in each and every unit. CURT mechanically descales each one to provide a smooth surface for a long-lasting finish. This class 3 ball mount comes with a durable gloss black powder coat finish to protect against corrosion, scratches, UV damage, and more to give it the thick skin it needs to face the road ahead.
Features:
Fits trailer hitches with a 2" x 2" receiver tube opening
Equipped with a 1" hole to accept a trailer ball shank
4" rise or 6" drop for precise trailer leveling
The hollow shank weighs less and can be used with an anti-rattle kit
CNC-formed, robotically welded, and mechanically descaled for a perfect fit
Protected by a durable powder coat finish
Made in USA
Specifications:
Ball Hole: 1 in.
Drop 6 in.
Finish: Gloss black powder coat
GTW/TW Ball Drop: 7,500 / 750 lb.
GTW/TW Ball Rise: 6,000 LB / 600 lb.
Hub Warehouse: D01
Length: 9-1/4 in.
Material: Carbon steel
Part Type: Class 3 ball mount
Receiver Tube Size: 2 in.
Rise: 4 in.
Warranty: Limited lifetime warranty (one-year finish, one-year parts)
*Trailer ball and hitch pin sold separately
|
36.22 |
|
|
Specifically formulated for marine applications. Premium lithium formula provides optimum corrosion protection in both freshwater and saltwater applications. Ideal for trailer wheel bearings, universal joints and outdrive pivot joints. Operating temp -40° to +350°F.
|
24.79 |
|
|
Groco K-4 Bowl Flap Plate
|
103.94 |
|
|
Groco M350-4 4 Valve Manifold, 1/2"Valve
|
215.48 |
|