|
Low-Profile Submersible Trailer Light Kit
Low profile for trailers over 80 inches wide. Ideal replacement lights for most boat trailers. Conforms to applicable U.S. FMVSS and Canadian CMVSS safety standards.
Kit Includes:
(2) multi-function lamps
Wiring harness
License plate bracket and mounting hardware
|
40.13 |
|
|
Submersible LED Low-Profile Trailer Light Kit
Ideal replacement or upgrade for most trailers. Conforms to applicable U.S. FMVSS and Canadian CFMVSS standards.
Kit Includes:
Includes (2) multi-functional (stop/tail/turn) submersible low-profile LED trailer lights
License plate bracket
Wiring harness and installation hardware
|
64.28 |
|
|
Combination Bow Light - Low Profile
Low Profile Combination Bow Light is for replacement of existing lighting (not for new construction). Constructed of die cast chrome zinc. Lens can be reversed for under mounting. Installs with two #10 FH fasteners (not included). Recommended for fresh water use. These navigation lights do not meet the USCG 33 CFR 183.810/ABYC standard A-16 from 2016, but do meet the USCG 33 CFR/ABYC A-16 from 1997.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
17.88 |
|
|
Clamp-On Portable LED Light Kit - Marine Gray
Features:
Water-resistant bow and stern navigation lights
Attwood's most durable, portable LED navigation light engines
Sealed electronics, built to last in harsh conditions
150+ hour run-time on three AAA batteries (not included)
Heavy-duty c-clamp
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
29.10 |
|
|
Clamp-On Portable LED Light Kit - RealTree® Max-4 Camo
Features:
Water-resistant bow and stern navigation lights
Attwood's most durable, portable LED navigation light engines
Sealed electronics, built to last in harsh conditions
150+ hour run-time on three AAA batteries (not included)
Heavy-duty c-clamp
|
35.46 |
|
|
Submersible LED Trailer Light Kit
For use with trailers under 80 inches wide. Conforms to applicable U.S. FMVSS and Canadian CFMVSS standards.
Kit Includes:
(2) multi-functional (stop/tail/turn) submersible LED trailer lights
License plate bracket
Wiring harness and installation hardware
|
55.88 |
|
|
Submersible Trailer Light Kit
Applicable to trailers under 80 inches wide. Ideal for utility, snowmobile, camping, motorcycle, and boat trailers. Design conforms to applicable US FMVSS and Canadian CMVSS safety standards.
Complete Kit Includes:
A pair of 8-function stop/tail/turn lights, wiring harness, and license plate bracket
|
29.42 |
|
|
Flex-Fit™ PRO Polyester Size 6 Boat Cover for V-Hull Low Profile Cuddy Cabin Boats I/O or O/B - Grey
*19'-22' Centerline Length
*102" Max Beam Width
Available in 10 sizes that fit practically all 14 – 23 foot boats. Economically priced, our Flex-Fit™ PRO universal cover is an excellent choice for storage and trailering. Our Flex-Fit™ PRO boat covers feature a strong and durable 1/4″ shock cord encased into the hem for a snug fit. One tie-down kit is included for quick and easy tie-down. Mesh Storage bag is included.
Poly-Flex II - Economically-priced 5.3 oz. Solution-Dyed Marine Polyester with urethane coating. Lightweight and strong. Good resistance to tearing. Durable water repellency, UV and mildew resistant finish. Breathable to help allow interior moisture to escape. Designed and sewn in the USA. (3 Year Limited Warranty).
Boat Types:
V-Hull Low-Profile Cuddy Cabin Boats I/O or O/B
Features:
Construction - Join seams are folded four-ply. No raw edges
Stitching - Double stitch construction for added strength and durability
Weather Resistant - Anti-wick thread throughout construction
Double Reinforced - Tie-down loops sewn into hem
Best Warranty in the Business - Best Warranty in the business based on fabric selection
All Carver Covers are Made in the USA
|
206.26 |
|
|
Portable Low Profile Fuel Tank - 12 Gallon with Gauge
Attwood has engineered the industry’s only comprehensive EPA-certified fuel tank-to-engine solution. Tough materials and innovative design stand up to harsh marine conditions. A 12-gallon tank is ideal for pontoon boats where more fuel capacity is needed. Includes gauge and low profile save space.
Features:
12 Gallon fuel capacity
Compatible with 1/4-inch NPT fuel fittings
High-Contrast, easy to read gage
Save space; the low profile is 3 inches lower than regular 12-gallon tanks
Additional oil and ullage/vapor capacity
EPA Cap with automatic, high-flow vacuum valve
UV-grade multi-layer tank material
Automotive-grade, multi-layer construction withstands the pressure build-up associated with closed fuel systems
Cap with built-in vacuum valve means no need for manual venting
Meets EPA and CARB (California Air Resources Board) regulations
Complies with all ABYC/NMMA requirements for portable marine fuel tanks
Dimensions:
Length: (inch) 24"
Width: (inch) 18"
Height: (inch) 11.61"
*No fuel line included
|
118.74 |
|
|
Portable Low Profile Fuel Tank - 12 Gallon without Gauge
This Attwood 12-Gallon Fuel Tank is ideal for use in a pontoon boat, where greater fuel capacity is commonly desired for extended days on the water. This durable, sturdy tank is EPA-compliant and it features a low-profile design. It does not have a fuel gauge.
Features:
12 Gallon fuel capacity
Low-profile design
Compatible with 1/4-inch NPT fuel fittings
Additional oil and ullage/vapor capacity
EPA Cap with automatic, high-flow vacuum valve
UV-grade multi-layer tank material
Automotive-grade, multi-layer construction withstands the pressure build-up associated with closed fuel systems
Cap with built-in vacuum valve means no need for manual venting
Meets EPA and CARB (California Air Resources Board) regulations
Complies with all ABYC/NMMA requirements for portable marine fuel tanks
Dimensions:
Length: (inch) 24"
Width: (inch) 18"
Height: (inch) 11.61"
*No gauge or fuel line included
|
111.10 |
|
|
Profile P1120 Tri-Light Surface Light - Red, Cool White & Blue - White Finish
3 Colors with Only 2 Wires
Award-winning i2Wave technology, allows users to change between 3 colors of light by simply toggling the power to the fixture.
Small in size and simple to install, fixture mounts to most any marine surface - inside and out.
Rugged & Waterproof
With stainless steel construction and a titanium coated trim bezel, expect industry leading fit and finish that will last. IP67 waterproof rated*.
*IP67 rated. Not for use in submersible applications.
Features:
Surface Mount - Less than 3/4" thick
Use your existing wiring and switch
3 colors, 1 fixture
Simple 2 wire hookup
Color: Red, White & Blue
3.48" Round
0.72" Deep
LED
Marine Grade
Refit friendly
Power: 1.5W
Beam Angle: 120°
Typical Applications:
Hardtop
Arch
Cockpit
Courtesy
Pilot House
|
122.93 |
|
|
LED 3-Mile Transom Light
Part #: 6556-7
For pleasure craft up to 164 ft. (50m) in length, Attwood offers one of the first 3NM LED transom navigational lights. Creating 135 degrees of light at 3NM of visibility, Attwood's proprietary optics design focuses the light aft, keeping the operator in a "shadow". A truly unique design, Attwood's transom light includes a luxurious electropolished stainless cover that is both durable and great looking. Attwood wraps it all together with an easy to install, "surface mount" design that utilizes a snap feature to eliminate exposed fasteners. 3 inch diameter.
1.5 watts at 12 VDC, compatible with both Attwood and Perko mounting holes. Lights are rated for 50,000+ hours of use and feature a 10 year warranty.
Features:
Stainless Steel
1.5W at 12VDC
135 degrees
3nm
10-Year Warranty
|
57.65 |
|
|
PaddleSport Portable Navigation Light Kit - Screw Down or Adhesive Pad - Gray
Be seen and be safe with these compact and portable LED navigation lights. Portable navigation lights are more durable, easier to use, and include Attwood's strongest mounting and pole configurations. Ideal for
personal water craft, camping, and hunting. Kit includes red/green LED bow light, white LED stern light, quick release mounts, pole, and hardware.
Features:
Water-resistant bow and stern navigation lights
Attwood's most durable, portable LED navigation light engines
Sealed electronics, built to last in harsh conditions
Sealed, shock-proof composite housing
Shatter-proof polycarbonate lens
150+ hour run-time on three AAA batteries (not included)
Telescoping poles
Kayak Pad mounting or Screw Down options
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
38.69 |
|
|
PaddleSport Portable Navigation Light Kit - Screw Down or Adhesive Pad - RealTree® Max-4 Camo
Be seen and be safe with these compact and portable LED navigation lights. Portable navigation lights are more durable, easier to use, and include Attwood's strongest mounting and pole configurations. Ideal for
personal water craft, camping, and hunting. Kit includes red/green LED bow light, white LED stern light, quick release mounts, pole, and hardware.
Features:
Water-resistant bow and stern navigation lights
Attwood's most durable, portable LED navigation light engines
Sealed electronics, built to last in harsh conditions
Sealed, shock-proof composite housing
Shatter-proof polycarbonate lens
150+ hour run-time on three AAA batteries (not included)
Telescoping poles
Kayak Pad mounting or Screw Down options
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
51.78 |
|
|
PaddleSport Portable Navigation Light Kit - C-Clamp, Screw Down or Adhesive Pad - Gray
Be seen and be safe with these compact and portable LED navigation lights. Portable navigation lights are more durable, easier to use, and include Attwood's strongest mounting and pole configurations. Ideal for
personal water craft, camping, and hunting. Kit includes red/green LED bow light, white LED stern light, quick release mounts, pole, and hardware.
Features:
Water-resistant bow and stern navigation lights
Attwood's most durable, portable LED navigation light engines
Sealed electronics, built to last in harsh conditions
Sealed, shock-proof composite housing
Shatter-proof polycarbonate lens
150+ hour run-time on three AAA batteries (not included)
Threaded poles
C-Clamp, Kayak Pad Mounting or Screw Down options
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
32.80 |
|