|
Curved Leveler & Wheel Chock *2-Pack
The Camco Curved Leveler is a simple way to level your vehicle by giving a tire up to 4-inches of extra lift. The honeycomb design makes the leveler lightweight but durable. The drive-on curved design allows you to only drive on to as much height as needed, then chock the leveler at the exact right height. The included chock has non-slip rubber grippers on the bottom. Patented.
Features:
Easy drive-on leveler adds up to 4-inches in height
Honeycomb design makes leveler lightweight, but durable
Included chock has non-slip rubber grippers on the bottom
The compact length makes the leveler compatible with tandem wheel spacing without modification
Designed for use with trailers up to 30,000 lb.
Patented
|
61.07 |
|
|
Curved Leveler & Wheel Chock
The Camco Curved Leveler is a simple way to level your vehicle by giving a tire up to 4-inches of extra lift. The honeycomb design makes the leveler lightweight but durable. The drive-on curved design allows you to only drive on to as much height as needed, then chock the leveler at the exact right height. The included chock has non-slip rubber grippers on the bottom. Patented.
Features:
Easy drive-on leveler adds up to 4-inches in height
Honeycomb design makes leveler lightweight, but durable
Included chock has non-slip rubber grippers on the bottom
The compact length makes the leveler compatible with tandem wheel spacing without modification
Designed for use with trailers up to 30,000 lb.
Patented
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
32.95 |
|
|
FasTen Leveling Blocks with T-Handle - 2x2 - Yellow *10-Pack
The Camco FasTen Leveling Blocks allow you to stack the interlocking blocks to the desired height for safe and easy leveling. Each block adds a full inch to stack height. Camco’s FasTen Leveling Blocks can be used with single wheels, double wheels, hydraulic jacks, tongue jacks, stabilizer jacks, 5th wheel jacks, and tandem axles. The convenient carrying handles easily pull up for carrying or twist down to secure blocks together for storage. Product dimensions: 8.5” x 8.5” x 1”. Stack height should not exceed 4-1/2 inches.
Features:
10 interlocking blocks stack to the desired height for customizable leveling
Carrying handle easily twists to secure blocks together for storage
Strong and durable construction
Safe and easy to use
Compatible with Camco Leveling Blocks
|
43.79 |
|
|
FasTen Leveling Blocks with T-Handle - 2x2 - Brown *10-Pack
The Camco FasTen Leveling Blocks allow you to stack the interlocking blocks to the desired height for safe and easy leveling. Each block adds a full inch to stack height. Camco’s FasTen Leveling Blocks can be used with single wheels, double wheels, hydraulic jacks, tongue jacks, stabilizer jacks, 5th wheel jacks, and tandem axles. The convenient carrying handles easily pull up for carrying or twist down to secure blocks together for storage. Product dimensions: 8.5” x 8.5” x 1”. Stack height should not exceed 4-1/2 inches.
Features:
10 interlocking blocks stack to the desired height for customizable leveling
Carrying handle easily twists to secure blocks together for storage
Strong and durable construction
Safe and easy to use
Compatible with Camco Leveling Blocks
|
45.04 |
|
|
Fold-Up Trailer Jack - 1000 lb Capacity - Single Wheel
Fits 3 inch x 5 inch tongue and swings up and out of the way. Swing-up jack has a convenient sidewind handle and a tough 6 inch diameter polypropylene wheel.
Features:
Corrosion-resistant, zinc-plated steel tubing
Specifications:
Travel lift (inch): 10"
Lift (inch): 24"
|
39.29 |
|
|
Fold-Up Trailer Jack - 1500 lb Capacity - Dual Wheel
Fits 3 inch x 5 inch tongue and swings up and out of the way. Swing-up jack has a convenient sidewind handle and TWO tough 6 inch diameter polypropylene wheels.
Features:
Corrosion-resistant, zinc-plated steel tubing
Specifications:
Travel lift (inch): 12"
Lift (inch): 26"
|
46.43 |
|
|
Bumper Cap with Insect Screen - 2-Pack
Replace lost or damaged RV bumper caps with Camco’s RV bumper caps, featuring vent holes and a squeeze grip for easy installation and removal. Holes allow ventilation while keeping flying insects out. It fits standard OEM 4-inch square bumpers and is constructed of durable polyethylene. Patented.
Features:
Keeps nesting insects out; smaller holes provide no-insect ventilation
Fits standard OEM 4-inch square bumpers
Squeeze grip for easy installation and removal
Includes clip-on saver
Durable polyethylene construction
*Sold as a pack (2)
|
5.96 |
|
|
RAM® Vertical Track Tie Down – 2 Pack
As a pack of two, the RAM® Vertical Track Tie Down system features a T-Bolt and provides an anchor point for use with a track mounting system, allowing you to secure coolers and other accessories to your kayak. Each tie down is designed to work with 1” and 1.5” flat webbing, as well as ropes and bungee cords up to 3/8”. Compatible with all versions of the RAM Tough-Track™.
Material:
High Strength Composite
Note:
The "U" in the part number reflects product packaged in poly bag.
|
13.66 |
|
|
Replacement Garboard Drain Plug Only *2-Pack
Provides bilge drainage when hauling out and the nut removed with a wrench or pliers.
Features:
Machined tapered pipe threads ensure a watertight plug fit
3/8" neck depth
Specifications:
Construction: Brass
*Sold as a package containing two drain plugs
|
11.99 |
|
|
Tinned Lug 6 AWG - 3/8" Stud Size - 2 Pack
Lugs are connection points that are created by crimping the connector onto a wire or cable. This connection, commonly referred to as a cold weld, creates a solid, long-lasting connection. Pacer lugs are made from 100% pure copper for high conductivity. This copper is fully annealed to prevent cracking while being crimped and while in service. These terminals are also tin-plated to prevent corrosion and many of these lugs are general-purpose seamless electrical terminals. They are commonly used with battery cables.
Features:
Tin-plated copper with no exposed seams offering 100% long-term conductivity
Tinned copper
Highly durable
Multitude of sizes
Easily terminated
Infield applications
Long-lasting
Compliances:
E.T.P. (Electrolytic Tough Pitch) CDA-110
ASTM-B-152 Copper
RoHS Compliant
CSA Approved
UL Approved
Specifications:
Wire AWG: 6 AWG
Stud Size (inch): 3/8"
Length (inch): 1.406"
Width (inch): 0.609"
Clearance (inch): 0.406"
Package Size: Two included
|
4.80 |
|
|
Tinned Lug 6 AWG - 1/4" Stud Size - 2 Pack
Lugs are connection points that are created by crimping the connector onto a wire or cable. This connection, commonly referred to as a cold weld, creates a solid, long-lasting connection. Pacer lugs are made from 100% pure copper for high conductivity. This copper is fully annealed to prevent cracking while being crimped and while in service. These terminals are also tin-plated to prevent corrosion and many of these lugs are general-purpose seamless electrical terminals. They are commonly used with battery cables.
Features:
Tin-plated copper with no exposed seams offering 100% long-term conductivity
Tinned copper
Highly durable
Multitude of sizes
Easily terminated
Infield applications
Long-lasting
Compliances:
E.T.P. (Electrolytic Tough Pitch) CDA-110
ASTM-B-152 Copper
RoHS Compliant
CSA Approved
UL Approved
Specifications:
Wire AWG: 6 AWG
Stud Size (inch): 1/4"
Length (inch): 1.266"
Width (inch): 0.438"
Clearance (inch): 0.344"
Package Size: Two included
|
4.80 |
|
|
2-Pack RAM® Roller-Ball™ Paddle & Accessory Holder
With the 2-Pack RAM® Roller-Ball™ holder for tracks, easily secure your heavy-duty net, paddle, gaff hooks, stakeout / push poles, or BogaGrip®. Its three-point security design on each RAM® Roller-Ball™ means there are always three points of tension keeping your net, paddle or other items attached, while also ensuring quiet placement and removal. The T-Bolt adapter is compatible with the RAM® Tough-Track™ and most other kayak track systems, and holds paddles and poles 1” - 1 5/16” in diameter.
Specifications:
Material: Rubber and High Strength Composite
Note: Part number reflects product packaged in retail bag for store shelf display
Weight: 0.5 lbs.
T-Bolt Dimensions: .48" x .95"
|
26.08 |
|
|
3" 4 LED Cube Light - 2-Pack
Specifications:
Wattage: 13W
Lumens: 1080
Lux @ 10M: 411
Color Temperature: 6000K
Beam Pattern: Spot (8°)
Construction:
Housing Material: Die-Cast Aluminum Housing
Housing Color: Black
Lens Material: PC
Mounting Bracket: Stainless Steel
Electronics: Integrated–Epoxy Encapsulated
Hardware: Stainless 316
Operation:
Operating Temperature: -40°C to +60°C
Current Consumption @ 13.8V: 0.9 A
IP Rating: IP67
Protections: Reverse Polarity
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
239.04 |
|
|
Marine network cable connector RJ45, 2-Pack
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
12.58 |
|
|
Shur-LOK Swivel Pad & Scrubbers
Fine Scrubber Pad
(2 pack)
|
10.78 |
|