LED Left/Roadside Submersible Taillight - Over 80" - Stop/Turn The Wesbar LED submersible, waterproof square trailer tail light, allows for a brighter light with a longer life. The amperage draw is also lower than incandescent. It includes a built-in side marker reflector that meets D.O.T. The light mounts easily by just drilling two holes on 2-inch centers and using the provided stainless steel mount nuts. This product is ideal for trailers over 80 inches wide that need a license plate light. Rest assured Wesbar lighting products comply with Department of Transportation lighting requirements. Features: Ideal for boat and personal water craft trailers Tail light is waterproof and suitable for the marine environment Stainless steel hardware Built in side marker light and reflector Tail light is waterproof and suitable for the marine environment

7-Function Submersible Over 80" Taillight - Right/Curbside Warranty: Limited 1 Year WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

600 Lumens LED Lantern with BatteryGuard™ - Green The Coleman 600 Lumens LED Lantern with BatteryGuard stops battery drain so you'll have power when you need it most. Traditional battery-operated lanterns experience residual power drain as long as batteries are connected to the circuit, even when the device is turned off. With BatteryGuard, the batteries are automatically disengaged from the course when the lantern is switched off to extend their life by as much as 25%. This technology also reduces the chance of damaging corrosion so batteries can be stored in the device for years (up to their inherent shelf life). Additional features include a single button to turn the lantern on and off, up to 30 hours runtime on high using 3D batteries (sold separately), water resistance, impact resistance up to 2 meters (on dirt), and lifetime LED bulbs that never need replacing. Whether from power outages to roadside emergencies, this BatteryGuard lantern with a 12-meter beam gives you Power When You Need It. Features: BatteryGuard technology stops battery drain to preserve battery life and reduce corrosion Allows batteries to be stored in the lantern for years (up to their inherent shelf life) 2 modes: high, and low; lasts up to 30 hours on high and uses 3D batteries (sold separately) Brightness: up to 600 lumens; beam distance: up to 12 meters IPX4 water-resistant design; impact-resistant up to 2 meters (on dirt) Lifetime LEDs never need replacing; 3-year limited warranty Specifications: Color: Green Weight (lbs): 1.220 Max Run Time (hours): 30 Lighting Water Rating: IPX4 Battery Type: Alkaline Fuel Type: Battery

SCR-24 Bronze Underwater Light - 24 LEDs - Bimini Blue/Great White The SCR series underwater LED lights are designed to be marine vessel hull mounted for continuous submersion in sea water. These models off a great value and small 4" diameter to fit many locations.  Multiple brightness options are available as well as single or multi-color. High Intensity Shadow-Caster underwater LED lights are designed to deliver the most intense optical output. Our unique design allows us to produce maximum light output and maximum LED life (over 40,000 hours). Robust Design With Shadow-Caster underwater LED lights, there’s no additional external components to install. Just connect the cable (submersible to 20 feet). All the necessary electronics are integrated into the housing and resistant to vibration and the elements. Surface Mounted Our lighting solutions feature a low profile design that requires no alteration to the main hull Wide Input Voltage Range Shadow-Caster’s underwater LED lights have an input range of 10 to 30 volts and work equally well on sets of 12 or 24 volts. Surge and Reverse Polarity Protection Our lighting systems have an innovative protection system that automatically disconnects the input entry when excessive voltage or reverse polarity is detected. Thermal Protection Our unique thermal protection features a control system that detects internal temperature and adjusts energy production down to avoid damage. Features: 90 Watts (7.5 amps @12 volts) 4 “ Outside Diameter Bronze Housing Scratch-Resistant Glass Lens Surge and Reverse Polarity Protection Thermal Throttling ( C ) Above Water Protection Shadow-Net Enabled Includes 10’ Submersible Cord & Install Diagram 10-40 Volts input 2- Year Warranty Made in the USA WARNING: This product can expose you to chemicals including Urethane which is known to the State of California to cause cancer or other reproductive harm, and LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

20" Single Row LED Light Bar - Combo Optics - Black Housing - Pro Series 3.0 This slim LED light bar could hide in a grill, trim, rack, or be mounted below a bumper. While it may be easy to hide a single row of LEDs with a switch off, the extremely bright Osram LEDs will be impossible to conceal once users hit that switch. The lumen output of Black Oak's most popular single row is guaranteed to impress users and everyone who comes into contact with this slim LED light bar. Built to Last While the 20-inch single-row LED light bar may not look like it can take a beating, Black Oak can assure users that this guy may be part Irish. With a case height of only 2 inches, this bar is still rated with the same IP69K rating, so users know the single row will continue kicking and screaming for years to come. Black Oak backs this with a lifetime limited warranty, so users can be sure the good times will continue for years to come. Black Oak has taken the LED game to the next level. The Pro Series 3.0 features top-of-the-line LED tech, boasting a 20% increase in lumens, making this series of lights one of the brightest on the market. Features: 360° Ceramic Protection against UV, Salt Water & Corrosion 2 Stage Hydrex Seal Lock for IP69 protection and a fully submersible light bar Heavy-duty Dynamax housing for a 4x stronger frame Combination Flood/Spot light pattern offers a superior lighting pattern Activities & Uses:  Off-road spot light T-Top boat light Jeep hood light UTV dune riding Lower bumper truck lights Technical Specifications: Total Wattage: 100W Amp. Draw: 6.7 LED Quantity: 20 Weight: 6.4 lbs. Raw Lumens: 13,200 Warranty: Lifetime IP Rating: IP69K     Dimensions with Mounting Bracket (Width x Height): 23" x 2.6" In the Box: 20” light bar Complete wiring harness with fuse, relay, and switch Mounting brackets All hardware, ready to install! *Sold as an Individual

High-Output Submersible Underwater Light with Intelligent Monochromatic LED's - Blue, 45° Beam  The F-Series line of underwater marine lighting fixtures is designed to mounted a depth of up to 4.6M (15') below the water’s surface to provide vibrant Blue light in the water. With watertight aluminum bronze housings and silicon bronze hardware, Metro Marine’s F-Series luminaires are perfect for marine-based applications such as mounting to yachts, docks, sea walls, as well as for use in fountains and theme park installations. Leveraging Metro’s rich legacy of innovation and leadership in optics & LED control technology, the F-Series underwater lighting fixtures introduce a unique LED array to the market with 18 H.O. LEDs per fixture, allowing close adjacent fixture placement where fully-mixed, uniform light is important. The F-BMR1-B3-45 is a superior underwater Blue LED luminaire with 45° optical lensing for lighting mid- to large-scale structures and yachts ranging from 10M (32') to 30M (100'), with uniform color control, and high efficiency. Clear Lens Technology One of the main problems seen with underwater marine lighting fixtures is the aggressive growth (biofouling) that attaches to the clear lenses in front of the LEDs. This growth blocks the light, and causes the fixtures to overheat. When UVC’s became available in LED form, Metro Marine devised and patented a unique and innovative system utilizing UVC LEDs to keep the lenses on our fixtures crystal clear – forever! Anti-Condensation Assembly Methodology Condensation is a critical issue found in many underwater marine lighting fixtures. It can cause internal corrosion which can destroy underwater lighting fixtures from the inside-out. Taking a scientific approach, we have solved this problem, completely eliminating condensation from forming in our fixtures. We manufacture our fixtures in a Class 1000 Clean Room, and our patent-pending assembly methodology guarantees our fixtures will never experience condensation! Technical Specifications: Beam Angle - 45° Input Voltage - 10VDC-30VDC  Power Consumption - 44W Dimensions - 5.47" (Dia.) x 1.12" (D) Weight - 2.71 lbs Lens Material - Clear Quartz Operating Temperature - -40 to 122° F 

High-Output Submersible Underwater Light with Intelligent Monochromatic LED's - Blue, 90° Beam The F-Series line of underwater marine lighting fixtures is designed to mounted a depth of up to 4.6M (15') below the water’s surface to provide vibrant Blue light in the water. With watertight aluminum bronze housings and silicon bronze hardware, Metro Marine’s F-Series luminaires are perfect for marine-based applications such as mounting to yachts, docks, sea walls, as well as for use in fountains and theme park installations. Leveraging Metro’s rich legacy of innovation and leadership in optics & LED control technology, the F-Series underwater lighting fixtures introduce a unique LED array to the market with 18 H.O. LEDs per fixture, allowing close adjacent fixture placement where fully-mixed, uniform light is important. The F-BMR1-B3-90 is a superior underwater Blue LED luminaire with 90° optical lensing for lighting mid- to large-scale structures and yachts ranging from 10M (32') to 30M (100'), with uniform color control, and high efficiency. Clear Lens Technology One of the main problems seen with underwater marine lighting fixtures is the aggressive growth (biofouling) that attaches to the clear lenses in front of the LEDs. This growth blocks the light, and causes the fixtures to overheat. When UVC’s became available in LED form, Metro Marine devised and patented a unique and innovative system utilizing UVC LEDs to keep the lenses on our fixtures crystal clear – forever! Anti-Condensation Assembly Methodology Condensation is a critical issue found in many underwater marine lighting fixtures. It can cause internal corrosion which can destroy underwater lighting fixtures from the inside-out. Taking a scientific approach, we have solved this problem, completely eliminating condensation from forming in our fixtures. We manufacture our fixtures in a Class 1000 Clean Room, and our patent-pending assembly methodology guarantees our fixtures will never experience condensation! Technical Specifications: Beam Angle - 90° Input Voltage - 10VDC-30VDC  Power Consumption - 44W Dimensions - 5.47" (Dia.) x 1.12" (D) Weight - 2.71 lbs Lens Material - Clear Quartz Operating Temperature - -40 to 122° F 

High-Output Submersible Underwater Light with Intelligent Monochromatic LED's - Green, 45° Beam The F-Series line of underwater marine lighting fixtures is designed to mounted a depth of up to 4.6M (15') below the water’s surface to provide vibrant Green light in the water. With watertight aluminum bronze housings and silicon bronze hardware, Metro Marine’s F-Series luminaires are perfect for marine-based applications such as mounting to yachts, docks, sea walls, as well as for use in fountains and theme park installations. Leveraging Metro’s rich legacy of innovation and leadership in optics & LED control technology, the F-Series underwater lighting fixtures introduce a unique LED array to the market with 18 H.O. LEDs per fixture, allowing close adjacent fixture placement where fully-mixed, uniform light is important. The F-BMR1-G3-45 is a superior underwater Green LED luminaire with 45° optical lensing for lighting mid- to large-scale structures and yachts ranging from 10M (32') to 30M (100'), with uniform color control, and high efficiency. Clear Lens Technology One of the main problems seen with underwater marine lighting fixtures is the aggressive growth (biofouling) that attaches to the clear lenses in front of the LEDs. This growth blocks the light, and causes the fixtures to overheat. When UVC’s became available in LED form, Metro Marine devised and patented a unique and innovative system utilizing UVC LEDs to keep the lenses on our fixtures crystal clear – forever! Anti-Condensation Assembly Methodology Condensation is a critical issue found in many underwater marine lighting fixtures. It can cause internal corrosion which can destroy underwater lighting fixtures from the inside-out. Taking a scientific approach, we have solved this problem, completely eliminating condensation from forming in our fixtures. We manufacture our fixtures in a Class 1000 Clean Room, and our patent-pending assembly methodology guarantees our fixtures will never experience condensation! Technical Specifications: Beam Angle - 45° Input Voltage - 10VDC-30VDC  Power Consumption - 44W Dimensions - 5.47" (Dia.) x 1.12" (D) Weight - 2.71 lbs Lens Material - Clear Quartz Operating Temperature - -40 to 122° F 

High-Output Submersible Underwater Light with Intelligent Monochromatic LED's - Green, 90° Beam The F-Series line of underwater marine lighting fixtures is designed to mounted a depth of up to 4.6M (15') below the water’s surface to provide vibrant Green light in the water. With watertight aluminum bronze housings and silicon bronze hardware, Metro Marine’s F-Series luminaires are perfect for marine-based applications such as mounting to yachts, docks, sea walls, as well as for use in fountains and theme park installations. Leveraging Metro’s rich legacy of innovation and leadership in optics & LED control technology, the F-Series underwater lighting fixtures introduce a unique LED array to the market with 18 H.O. LEDs per fixture, allowing close adjacent fixture placement where fully-mixed, uniform light is important. The F-BMR1-G3-90 is a superior underwater Green LED luminaire with 90° optical lensing for lighting mid- to large-scale structures and yachts ranging from 10M (32') to 30M (100'), with uniform color control, and high efficiency. Clear Lens Technology One of the main problems seen with underwater marine lighting fixtures is the aggressive growth (biofouling) that attaches to the clear lenses in front of the LEDs. This growth blocks the light, and causes the fixtures to overheat. When UVC’s became available in LED form, Metro Marine devised and patented a unique and innovative system utilizing UVC LEDs to keep the lenses on our fixtures crystal clear – forever! Anti-Condensation Assembly Methodology Condensation is a critical issue found in many underwater marine lighting fixtures. It can cause internal corrosion which can destroy underwater lighting fixtures from the inside-out. Taking a scientific approach, we have solved this problem, completely eliminating condensation from forming in our fixtures. We manufacture our fixtures in a Class 1000 Clean Room, and our patent-pending assembly methodology guarantees our fixtures will never experience condensation! Technical Specifications: Beam Angle - 90° Input Voltage - 10VDC-30VDC  Power Consumption - 44W Dimensions - 5.47" (Dia.) x 1.12" (D) Weight - 2.71 lbs Lens Material - Clear Quartz Operating Temperature - -40 to 122°   

High-Output Submersible Underwater Light with Intelligent Monochromatic LED's - Aqua, 45° Beam The F-Series line of underwater marine lighting fixtures is designed to mounted a depth of up to 4.6M (15') below the water’s surface to provide vibrant Aqua light in the water. With watertight aluminum bronze housings and silicon bronze hardware, Metro Marine’s F-Series luminaires are perfect for marine-based applications such as mounting to yachts, docks, sea walls, as well as for use in fountains and theme park installations. Leveraging Metro’s rich legacy of innovation and leadership in optics & LED control technology, the F-Series underwater lighting fixtures introduce a unique LED array to the market with 18 H.O. LEDs per fixture, allowing close adjacent fixture placement where fully-mixed, uniform light is important. The F-BMR1-A3-45 is a superior underwater Aqua LED luminaire with 45° optical lensing for lighting mid- to large-scale structures and yachts ranging from 10M (32') to 30M (100'), with uniform color control, and high efficiency. Clear Lens Technology One of the main problems seen with underwater marine lighting fixtures is the aggressive growth (biofouling) that attaches to the clear lenses in front of the LEDs. This growth blocks the light, and causes the fixtures to overheat. When UVC’s became available in LED form, Metro Marine devised and patented a unique and innovative system utilizing UVC LEDs to keep the lenses on our fixtures crystal clear – forever! Anti-Condensation Assembly Methodology Condensation is a critical issue found in many underwater marine lighting fixtures. It can cause internal corrosion which can destroy underwater lighting fixtures from the inside-out. Taking a scientific approach, we have solved this problem, completely eliminating condensation from forming in our fixtures. We manufacture our fixtures in a Class 1000 Clean Room, and our patent-pending assembly methodology guarantees our fixtures will never experience condensation! Technical Specifications: Beam Angle - 45° Input Voltage - 10VDC-30VDC  Power Consumption - 44W Dimensions - 5.47" (Dia.) x 1.12" (D) Weight - 2.71 lbs Lens Material - Clear Quartz Operating Temperature - -40 to 122° 

High-Output Submersible Underwater Light with Intelligent Monochromatic LED's - Aqua, 90° Beam The F-Series line of underwater marine lighting fixtures is designed to mounted a depth of up to 4.6M (15') below the water’s surface to provide vibrant Aqua light in the water. With watertight aluminum bronze housings and silicon bronze hardware, Metro Marine’s F-Series luminaires are perfect for marine-based applications such as mounting to yachts, docks, sea walls, as well as for use in fountains and theme park installations. Leveraging Metro’s rich legacy of innovation and leadership in optics & LED control technology, the F-Series underwater lighting fixtures introduce a unique LED array to the market with 18 H.O. LEDs per fixture, allowing close adjacent fixture placement where fully-mixed, uniform light is important. The F-BMR1-A3-90 is a superior underwater Aqua LED luminaire with 90° optical lensing for lighting mid- to large-scale structures and yachts ranging from 10M (32') to 30M (100'), with uniform color control, and high efficiency. Clear Lens Technology One of the main problems seen with underwater marine lighting fixtures is the aggressive growth (biofouling) that attaches to the clear lenses in front of the LEDs. This growth blocks the light, and causes the fixtures to overheat. When UVC’s became available in LED form, Metro Marine devised and patented a unique and innovative system utilizing UVC LEDs to keep the lenses on our fixtures crystal clear – forever! Anti-Condensation Assembly Methodology Condensation is a critical issue found in many underwater marine lighting fixtures. It can cause internal corrosion which can destroy underwater lighting fixtures from the inside-out. Taking a scientific approach, we have solved this problem, completely eliminating condensation from forming in our fixtures. We manufacture our fixtures in a Class 1000 Clean Room, and our patent-pending assembly methodology guarantees our fixtures will never experience condensation! Technical Specifications: Beam Angle - 90° Input Voltage - 10VDC-30VDC  Power Consumption - 44W Dimensions - 5.47" (Dia.) x 1.12" (D) Weight - 2.71 lbs Lens Material - Clear Quartz Operating Temperature - -40 to 122° 

High-Output Submersible Underwater Light with Intelligent Monochromatic LED's - White, 45° Beam The F-Series line of underwater marine lighting fixtures is designed to mounted a depth of up to 4.6M (15') below the water’s surface to provide vibrant White light in the water. With watertight aluminum bronze housings and silicon bronze hardware, Metro Marine’s F-Series luminaires are perfect for marine-based applications such as mounting to yachts, docks, sea walls, as well as for use in fountains and theme park installations. Leveraging Metro’s rich legacy of innovation and leadership in optics & LED control technology, the F-Series underwater lighting fixtures introduce a unique LED array to the market with 18 H.O. LEDs per fixture, allowing close adjacent fixture placement where fully-mixed, uniform light is important. The F-BMR1-W3-45 is a superior underwater White LED luminaire with 45° optical lensing for lighting mid- to large-scale structures and yachts ranging from 10M (32') to 30M (100'), with uniform color control, and high efficiency. Clear Lens Technology One of the main problems seen with underwater marine lighting fixtures is the aggressive growth (biofouling) that attaches to the clear lenses in front of the LEDs. This growth blocks the light, and causes the fixtures to overheat. When UVC’s became available in LED form, Metro Marine devised and patented a unique and innovative system utilizing UVC LEDs to keep the lenses on our fixtures crystal clear – forever! Anti-Condensation Assembly Methodology Condensation is a critical issue found in many underwater marine lighting fixtures. It can cause internal corrosion which can destroy underwater lighting fixtures from the inside-out. Taking a scientific approach, we have solved this problem, completely eliminating condensation from forming in our fixtures. We manufacture our fixtures in a Class 1000 Clean Room, and our patent-pending assembly methodology guarantees our fixtures will never experience condensation! Technical Specifications: Beam Angle - 45° Input Voltage - 10VDC-30VDC  Power Consumption - 44W Dimensions - 5.47" (Dia.) x 1.12" (D) Weight - 2.71 lbs Lens Material - Clear Quartz Operating Temperature - -40 to 122° 

High-Output Submersible Underwater Light with Intelligent Monochromatic LED's - White, 90° Beam The F-Series line of underwater marine lighting fixtures is designed to mounted a depth of up to 4.6M (15') below the water’s surface to provide vibrant White light in the water. With watertight aluminum bronze housings and silicon bronze hardware, Metro Marine’s F-Series luminaires are perfect for marine-based applications such as mounting to yachts, docks, sea walls, as well as for use in fountains and theme park installations. Leveraging Metro’s rich legacy of innovation and leadership in optics & LED control technology, the F-Series underwater lighting fixtures introduce a unique LED array to the market with 18 H.O. LEDs per fixture, allowing close adjacent fixture placement where fully-mixed, uniform light is important. The F-BMR1-W3-90 is a superior underwater White LED luminaire with 90° optical lensing for lighting mid- to large-scale structures and yachts ranging from 10M (32') to 30M (100'), with uniform color control, and high efficiency. Clear Lens Technology One of the main problems seen with underwater marine lighting fixtures is the aggressive growth (biofouling) that attaches to the clear lenses in front of the LEDs. This growth blocks the light, and causes the fixtures to overheat. When UVC’s became available in LED form, Metro Marine devised and patented a unique and innovative system utilizing UVC LEDs to keep the lenses on our fixtures crystal clear – forever! Anti-Condensation Assembly Methodology Condensation is a critical issue found in many underwater marine lighting fixtures. It can cause internal corrosion which can destroy underwater lighting fixtures from the inside-out. Taking a scientific approach, we have solved this problem, completely eliminating condensation from forming in our fixtures. We manufacture our fixtures in a Class 1000 Clean Room, and our patent-pending assembly methodology guarantees our fixtures will never experience condensation! Technical Specifications: Beam Angle - 90° Input Voltage - 10VDC-30VDC  Power Consumption - 44W Dimensions - 5.47" (Dia.) x 1.12" (D) Weight - 2.71 lbs Lens Material - Clear Quartz Operating Temperature - -40 to 122° 

High-Output Submersible Underwater Light with Intelligent Full Spectrum LED's - RGBW, 45° Beam The F-Series line of underwater marine lighting fixtures is designed to mounted a depth of up to 4.6M (15') below the water’s surface to provide vibrant color and color-changing light in the water. With watertight aluminum bronze housings and silicon bronze hardware, Metro Marine’s F-Series luminaires are perfect for marine-based applications such as mounting to yachts, docks, sea walls, as well as for use in fountains and theme park installations. . Leveraging Metro’s rich legacy of innovation and leadership in optics & LED control technology, the F-Series underwater lighting fixtures introduce a unique LED array to the market with 72 H.O. LEDs per fixture, allowing close adjacent fixture placement where fully-mixed, uniform light is important. Our F-Series RGBW Luminaires also integrate a separate white LED in each of the 18 individually optically lensed RGBW LED configurations, creating higher-quality whites and richer color blends than possible with traditional RGB+White fixtures. The F-BMR1-FS-45 is a superior underwater RGBW LED luminaire with 45° optical lensing for lighting mid- to large-scale structures and yachts ranging from 10M (32') to 30M (100'), with uniform color control, and high efficiency. Clear Lens Technology One of the main problems seen with underwater marine lighting fixtures is the aggressive growth (biofouling) that attaches to the clear lenses in front of the LEDs. This growth blocks the light, and causes the fixtures to overheat. When UVC’s became available in LED form, Metro Marine devised and patented a unique and innovative system utilizing UVC LEDs to keep the lenses on our fixtures crystal clear – forever! Anti-Condensation Assembly Methodology Condensation is a critical issue found in many underwater marine lighting fixtures. It can cause internal corrosion which can destroy underwater lighting fixtures from the inside-out. Taking a scientific approach, we have solved this problem, completely eliminating condensation from forming in our fixtures. We manufacture our fixtures in a Class 1000 Clean Room, and our patent-pending assembly methodology guarantees our fixtures will never experience condensation! Technical Specifications: Beam Angle - 45° Input Voltage - 10VDC-30VDC  Power Consumption - 86W Dimensions - 5.47" (Dia.) x 1.12" (D) Weight - 3.54 lbs Lens Material - Clear Quartz Operating Temperature - -40 to 122° 

High-Output Submersible Underwater Light with Intelligent Full Spectrum LED's - RGBW, 90° Beam The F-Series line of underwater marine lighting fixtures is designed to mounted a depth of up to 4.6M (15') below the water’s surface to provide vibrant color and color-changing light in the water. With watertight aluminum bronze housings and silicon bronze hardware, Metro Marine’s F-Series luminaires are perfect for marine-based applications such as mounting to yachts, docks, sea walls, as well as for use in fountains and theme park installations. . Leveraging Metro’s rich legacy of innovation and leadership in optics & LED control technology, the F-Series underwater lighting fixtures introduce a unique LED array to the market with 72 H.O. LEDs per fixture, allowing close adjacent fixture placement where fully-mixed, uniform light is important. Our F-Series RGBW Luminaires also integrate a separate white LED in each of the 18 individually optically lensed RGBW LED configurations, creating higher-quality whites and richer color blends than possible with traditional RGB+White fixtures. The F-BMR1-FS-90 is a superior underwater RGBW LED luminaire with 90° optical lensing for lighting mid- to large-scale structures and yachts ranging from 10M (32') to 30M (100'), with uniform color control, and high efficiency. Clear Lens Technology One of the main problems seen with underwater marine lighting fixtures is the aggressive growth (biofouling) that attaches to the clear lenses in front of the LEDs. This growth blocks the light, and causes the fixtures to overheat. When UVC’s became available in LED form, Metro Marine devised and patented a unique and innovative system utilizing UVC LEDs to keep the lenses on our fixtures crystal clear – forever! Anti-Condensation Assembly Methodology Condensation is a critical issue found in many underwater marine lighting fixtures. It can cause internal corrosion which can destroy underwater lighting fixtures from the inside-out. Taking a scientific approach, we have solved this problem, completely eliminating condensation from forming in our fixtures. We manufacture our fixtures in a Class 1000 Clean Room, and our patent-pending assembly methodology guarantees our fixtures will never experience condensation! Technical Specifications: Beam Angle - 90° Input Voltage - 10VDC-30VDC  Power Consumption - 86W Dimensions - 5.47" (Dia.) x 1.12" (D) Weight - 3.54 lbs Lens Material - Clear Quartz Operating Temperature - -40 to 122°