|
Interchangeable Hitch Ball w/ 1" Shank - 1-7/8", 2", 2-5/16" Balls
Designed to accommodate towing multiple trailers with ease, Tow Ready Interchangeable Hitch Ball System allows you to change hitch ball sizes in seconds without any tools.
Innovative quick release changes balls in seconds
Rated capacities up to 8,000 lbs.
Durable heat treated shank
New positive latch design
No special tools required
WARNING: This product can expose you to chemicals including Chromium (hexavalent compounds) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
78.91 |
|
|
Fairlead Black Plastic with Stainless Steel Liner - 8.5mm(5/16") ID
Fairleads are a simple and economical means of containing, deflecting or correcting the lead angle of control lines. Stainless steel liners provide greater abrasion resistance.
Materials:
Impact resistant, U.V. stablized Nylon
Stainless steel liner
|
8.04 |
|
|
1.5" Tough-Ball™ with 1/4-20 x .625" Male Threaded Post
The RAM Tough-Ball™....Why call it tough? Because this latest addition to the RAM product line has steel inside and out. The seamless transition between RAM versatility and steel durability allows for a multitude of real world, and out of this world, applications. With so many of the things we use incorporating threads and fasteners, there really is no limit to the number of uses you’ll find for the RAM Tough-Ball™.
The RAP-379U-252062 consists of a 1.5" diameter rubber ball, connected to a 1/4"-20 X .625" male threaded post. The male thread matches most standard camera and camcorder female threads found on the bottom of the camera.
Specifications:
Standard U.S. Thread Diameter and Pitch Option: 1/4"-20 X .625"
Material: High Strength Composite & Steel
Ball Size: 1.5" Rubber Ball Size
Note: The "U" in the part number reflects product packaged in poly bag.
Weight: 0.15 lbs.
|
11.34 |
|
|
Adjustable Dual Ball Mount
Adjustable Dual Ball Mount System, 2" Sq. Shank, 2" Ball 10,000 lbs. (GTW), 2-5/16" Ball 14,000 lbs. (GTW)
Features:
Adjustable height - Perfect for towing multiple trailers of varying heights and couplers
Height adjusts up to 10.5"
2" (10K GTW) and 2-5/16" (14K GTW) Hitch balls
Fits 2" receivers and rated up to 14K GTW
Cast shank, variable height capability
Knurled bolt pins with secure lanyard
Black powder coat finish
WARNING: This product can expose you to chemicals including Chromium (hexavalent compounds) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
335.46 |
|
|
Adjustable Tri-Ball Mount
Adjustable Tri-Ball Ball Mount System w/Step, 2" Sq. Shank, 1-7/8" Ball 2,000 lbs (GTW), 2" Ball 10,000 lbs. (GTW), 2-5/16" Ball 14,000 lbs. (GTW)
Features:
Adjustable height - Perfect for towing multiple trailers of varying heights and couplers
Height adjusts up to 10.5"
Rated to 14k GTW
1-7/8" (2K rating) , 2" (10K GTW), and 2-5/16" (14K GTW) Hitch balls
Fits 2" receivers and rated up to 14K GTW
Cast shank, variable height capability
Integrated hitch step with grip pattern
Knurled bolt pins with secure lanyard
Black powder coat finish
WARNING: This product can expose you to chemicals including Chromium (hexavalent compounds) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
353.42 |
|
|
20,000lb Capacity Disc Brake Actuator with 2-5/16″ Coupler
The Model works by the “surge” or “push” of the trailer toward the tow vehicle. This automatically synchronizes the trailer brakes with the brakes on the tow vehicle. When the trailer pushes against the tow vehicle, the actuator telescopes together and applies the force to the master cylinder, supplying hydraulic pressure to the brakes. The built-in, sealed, independent dampening shock absorber controls the telescoping shock against the hitch.
Be sure to comply with the regulations for brakes in the state. Brake laws are sometimes minimum standards, and users may wish to add brakes to a trailer to meet minimum Gross Vehicle Weight Ratings (G.V.W.R.). Note: G.V.W.R. is the Gross Vehicle Weight Rating, which includes the trailer and the load weight as a total gross weight.
Read the tow vehicle owner’s manual on towing capacity and other towing recommendations before installing brakes or this actuator.
Features:
20,000 lbs. capacity
Fits 2-5/16″ in. hitch ball
For use with disc brakes
Maximum Actuator Capacity:
Gross Load: 16,500 lbs.
The actual in-service rating is limited to that of the ball and hitch or the least-rated component on the tow vehicle or trailer being used, or the trailer manufacturer’s G.V.W.R. shown on the certification label, whichever is lower (note: G.V.W.R. is the Gross Vehicle Weight Rating, which includes the trailer and the load weight as total gross weight.
|
1121.09 |
|
|
Wire Rope Grip - Size 8 - 8mm(5/16") Diameter Wire
Features:
Used when adjustment in strop length is needed
Stainless Steel
Require no special tools for assembly and can be disassembled and reused
|
6.61 |
|
|
16,500lb Capacity Disc Brake Actuator with 2-5/16″ Coupler
The Model 16.5 works by the “surge” or “push” of the trailer toward the tow vehicle. This automatically synchronizes the trailer brakes with the brakes on the tow vehicle. When the trailer pushes against the tow vehicle, the actuator telescopes together and applies the force to the master cylinder, supplying hydraulic pressure to the brakes. The built-in, sealed, independent dampening shock absorber controls the telescoping shock against the hitch.
Be sure to comply with the regulations for brakes in the state. Brake laws are sometimes minimum standards, and users may wish to add brakes to a trailer to meet minimum Gross Vehicle Weight Ratings (G.V.W.R.). Note: G.V.W.R. is the Gross Vehicle Weight Rating, which includes the trailer and the load weight as a total gross weight.
Read the tow vehicle owner’s manual on towing capacity and other towing recommendations before installing brakes or this actuator.
The Model 16.5 Actuator is completely assembled and ready to bolt into place (tongue sizes: 3”x 4” & 3”x 5”, 9 ga. min.)
Features:
16,500 lbs. capacity
Fits 2-5/16″ in. hitch ball
For use with disc brakes
Maximum Actuator Capacity:
Gross Load: 16,500 lbs.
Maximum Tongue Load: 1,650 lbs.
Minimum Tongue Weight: 5% of G.V.W.R.
The actual in-service rating is limited to that of the ball and hitch or the least-rated component on the tow vehicle or trailer being used, or the trailer manufacturer’s G.V.W.R. shown on the certification label, whichever is lower (note: G.V.W.R. is the Gross Vehicle Weight Rating, which includes the trailer and the load weight as total gross weight.
|
883.36 |
|
|
8 AWG - 5/16" Nylon Ring Terminal - 25-Pack
Ancor's Marine Grade terminals differ from automotive terminals by being designed for the harsh marine environment. Nylon insulators are easy to crimp and will not split. Barrels are designed to tightly grip the wire with the least effort. Tinned copper gives the least electrical resistance but the most corrosion protection.
Features:
Nylon insulated with insulation grip
Double crimp, funnel entry
UL 486C
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
20.51 |
|
|
8 AWG - 5/16" Nylon Ring Terminal - 100-Pack
Ancor's Marine Grade terminals differ from automotive terminals by being designed for the harsh marine environment. Nylon insulators are easy to crimp and will not split. Barrels are designed to tightly grip the wire with the least effort. Tinned copper gives the least electrical resistance but the most corrosion protection.
Features:
Nylon insulated with insulation grip
Double crimp, funnel entry
UL 486C
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
41.99 |
|
|
1.5" Track Ball w/ T-Bolt Attachement
Designed to accommodate all kayak tracks, as well as common track systems, engage and fasten this base to your existing track system or many other's including GearTrac, SlideTrax and the common T-Track. With a quick turn of the ball the base will slide along the track, giving you ultimate flexibility in repositioning your rod holder. A necessity for the all fishing enthusiasts, the RAM Track Base is certain to create more mounting options or access on whatever you choose to take to the water.
Compatible Tracks: YakAttack GearTrac, Wilderness Systems SlideTrax, Most Common T-Tracks Scotty Slide Track, Many More!
|
14.41 |
|
|
316 SS Non-Perforated Worm Gear Hose Clamp - 3/8" Band - (5/16" – 9/16") Clamping Range - 10-Pack - SAE Size 3
Premium Marine Grade, all AISI 316 (high tensile strength) Stainless Steel Compact “HD NON-PERF” Worm Gear Hose Clamp. The 9.7 mm (0.382”) wide band is Non-Perforated and smooth on the inside with rolled edges. This eliminates hose damage with increased clamping force. The high strength, compact, one-piece 14mm (0.55”) wide housing provides one of the highest clamping force ratings of any worm gear style clamp.
Features:
The screw head is 7mm
Long service life and safety for most general-purpose hose applications and connections
Recommendations:
Measure hose O.D. before selecting clamp size for proper fit
Double clamp on each hose end for critical applications
Construction:
Band & Housing: 316 Stainless Steel 9.7 mm wide band – 0.8mm thick
Screw Drive: 316 Stainless Steel 7.0 mm screw head
Specifications:
SAE Size: 3
Hose Inner Diameter: (inch) 3/16" – 1/4"
Clamping Range: (inch) 5/16" – 9/16" / (mm) 8-14
Recommended Torque Inch lbs: 25-35
|
14.56 |
|
|
Brass Snap Shackle - Fixed Bail - 59.3mm(2-5/16") Length
Features:
Brass body and plunger pin
Full release arm
Heavy duty stainless steel plunger spring and precision components ensure dependable service
Split ring on plunger pin for pull-line attachment
|
15.40 |
|
|
90° Tinned Copper Lug #2 - 5/16" - 2-Piece
90° bend for ease of wire routing.
|
5.57 |
|
|
Walbro FRC-8-2 Industrial 12V Fuel Pump 12Psi
Industrial Reciprocating Fuel Pump Genuine Walbro Part # FRC-8-2 12 Volt Up to 12 PSI
Voltage: 12 Volt (9.0 min - 16.0 vdc max)
Minimum Flow Rate: 106 liters per hour (28 gph)
Deadhead Pressure: 62 to 83 kPa (9.0 to 12.0 psi)
Maximum Current Draw: 2.3 ampsLife: >8,000 hours
Dry Lift: 48 inches
Compatible Fuels: No-lead regular gasoline, premium gasoline, gasoline-alcohol blends, diesel and biodiesel fuels (20% and 100%), and E85
Corrosion Resistance: 96 hour salt spray test (ASTM B-117)Operating Temperature Range: -40ºF to 155ºF (-40ºC to 68.3ºC)
Electrical
Reverse Voltage Protected Transient Voltage Protection
Ground: Circuit Board is Internally Grounded to Pump Body
Electrical Connector: Packard Electric (Accepts mating connector 12015782)
Fuse: 5 amp recommended
Mechanical
Inlet & Outlet Size: 1/8-27 NPSF
Inlet Filter Screen: 70 micron
Magnetic Trap Standard
Outlet Check Valve: Yes
20 micron Filter Screen
The FRC series fuel pump is designed to supply fuel for internal combustion engine applications only. It is not intended or designed for continuous operation applications such as heater or stove systems.
|
461.18 |
|