2" x 12' Winch Strap w/Hook - 1,800lbs Max Load Includes loop Nylon web winch strap with hook, 2" x 12', 1,800lb maximum working load WARNING: This product can expose you to chemicals including BISPHENOL A (BPA) which is known to the State of California to cause birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

2" x 20' Winch Strap w/Hook - 2,600lbs Max Load Nylon web winch strap with hook, 2" x 20', 2,600 lb. maximum working load WARNING: This product can expose you to chemicals including BISPHENOL A (BPA) which is known to the State of California to cause birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Package Roller Shaft 1/2" x 12-3/4" with Cap Nuts - Zinc Roller shafts blister packed each with two cap nuts. Features: Length: 12-3/4" Max Grip: 12.190"

Heavy Duty Winch Strap and Hook 2" x 20', 10,000 lb. minimum breaking strength, 4,000 lb maximum working load WARNING: This product can expose you to chemicals including BISPHENOL A (BPA) which is known to the State of California to cause birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

2000 lb Dual Drive Winch - 2" x 20' Nylon Strap Dual drive enhances the pulling capacity by distributing the load equally to two sets of gears. Eliminates frame torque. 2,000-lb. load capacity with 4.1:1 gear ratio.  Features: Three-position pawl provides forward, neutral, and reverse operations  Black EDC finish. Molded, textured roller grip  Includes 2 in x 20 ft. nylon web strap with zinc-plated snap hook

P.W.C. Winch Strap w/Tail End - 2" x 15' A built-in nylon soft-loop hook enables these tie-downs to attach to your P.W.C without fear of scratching the gel coat. Break Strength: 3,500lbs SWL: 1,167lbs

P.W.C. Winch Strap w/Loop End - 2" x 15' A built-in nylon soft-loop hook enables these tie-downs to attach to your P.W.C without fear of scratching the gel coat. Break Strength: 3,500lbs SWL: 1,167lbs

1200 lb Single Drive Winch - 2" x 20' Nylon Strap Solid gear construction with precise gear tooth engagement. 1,200-lb. load capacity with 4.1:1 gear ratio. Three position pawl provides forward, neutral, and reverse operations.  Features: Black EDC finish  Molded, textured roller grip  Includes 20 ft. long nylon web strap with zinc-plated snap hook

Marine Grip Tape - 2 x 12" - Black -10 Pieces Harken Marine Grip is a thin, reliable, nonabrasive grip tape that is more effective than adhesive alternatives, waxes and other products that reduces slipping. It also stands up to extreme marine conditions on boats, docks and stairs. The superior grip is simple to install, clean and apply, and is cost-effective. And because it’s nonabrasive, it won’t damage clothing, wetsuits or skin. Harken Marine Grip is nonabsorbent, UV stable and good for all temperatures. When compared, Harken Marine Grip outgrips other adhesive alternatives and waxes.

Marine Grip Tape - 2 x 12" - Grey - 10 Pieces Harken Marine Grip is a thin, reliable, nonabrasive grip tape that is more effective than adhesive alternatives, waxes and other products that reduces slipping. It also stands up to extreme marine conditions on boats, docks and stairs. The superior grip is simple to install, clean and apply, and is cost-effective. And because it’s nonabrasive, it won’t damage clothing, wetsuits or skin. Harken Marine Grip is nonabsorbent, UV stable and good for all temperatures. When compared, Harken Marine Grip outgrips other adhesive alternatives and waxes.

Marine Grip Tape - 2 x 12" - Translucent White - 10 Pieces Harken Marine Grip is a thin, reliable, nonabrasive grip tape that is more effective than adhesive alternatives, waxes and other products that reduces slipping. It also stands up to extreme marine conditions on boats, docks and stairs. The superior grip is simple to install, clean and apply, and is cost-effective. And because it’s nonabrasive, it won’t damage clothing, wetsuits or skin. Harken Marine Grip is nonabsorbent, UV stable and good for all temperatures. When compared, Harken Marine Grip outgrips other adhesive alternatives and waxes.

Adhesive Lined Heat Shrink Tubing (ALT) - 1/2" x 12" - 5-Pack - Black Package of 5 Black 12"(30.5cm) long sections with a 1/2"(12.7mm) diameter that shrinks to 5/32"(4mm) Wire Range: 8-4 AWG Features: Cross Linked polyolefin tubing is much stronger than PVC tubing and will not burn like PVC Heat activated adhesive lining provides impervious seal to salt water, oil, acids, and sunlight as well as providing strain relief Highest shrink ratio - shrinks to 1/3 original size Shrinks at 257°F / 125°C Operating temperature range of -40°C to 110°C UL 224 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Adhesive Lined Heat Shrink Tubing (ALT) - 1/2" x 12" - 5-Pack - Red Package of 5 Red 12"(30.5cm) long sections with a 1/2"(12.7mm) diameter that shrinks to 5/32"(4mm) Wire Range: 8-4 AWG Features: Cross Linked polyolefin tubing is much stronger than PVC tubing and will not burn like PVC Heat activated adhesive lining provides impervious seal to salt water, oil, acids, and sunlight as well as providing strain relief Highest shrink ratio - shrinks to 1/3 original size Shrinks at 257°F / 125°C Operating temperature range of -40°C to 110°C UL 224 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

RAM 2" x 3" Rectangle Base w/1" Ball The RAM-B-202U-23 contains a 1" diameter rubber ball connected at right angles to a 2" x 3" rectangular base. This mount has pre-drilled holes at each corner of the base plate. Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag. Mounting hardware not included with purchase.

RAM 2" x 4" Rectangle Base w/1" Ball The RAM-B-202U-24 contains a 1" diameter rubber ball connected at right angles to a 2" x 4" rectangular base. This mount has pre-drilled holes at each corner of the base plate. Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag. Mounting hardware not included with purchase.