|
Panel Bracket Assembly 12" Keel Roller - Yellow TPR
Product Description
Pre-assembled for easy installation! Strong hot-dipped galvanized bracket with yellow rubber roller for proper keel support. Mounting slots are 10" on center
|
50.22 |
|
|
Panel Bracket Assembly 12" Keel Roller - Black
Product Description
Pre-assembled for easy installation! Strong hot-dipped galvanized bracket with black rubber roller for proper keel support. Mounting slots are 10" on center
|
45.88 |
|
|
Panel Bracket Assembly 10" Keel Roller - Black
Product Description
Pre-assembled for easy installation! Strong hot-dipped galvanized bracket with black rubber roller for proper keel support. Mounting slots are 8" on center.
|
38.92 |
|
|
Panel Bracket Assembly 5" Keel Roller - Black
Product Description
Pre-assembled for easy installation! Strong hot-dipped galvanized bracket with black rubber roller for proper keel support. Mounting slots are 3" on center.
|
23.17 |
|
|
Panel Bracket Assembly 8" Keel Roller - Black
Product Description
Pre-assembled for easy installation! Strong hot-dipped galvanized bracket with black rubber roller for proper keel support. Mounting slots are 6" on center
|
34.00 |
|
|
Panel Bracket Assembly 4"Spool Roller - Black
Product Description
Pre-assembled for easy installation! Strong hot-dipped galvanized bracket with 4" black rubber spool roller for proper keel support. Mounting slots are on 2" centers.
|
20.48 |
|
|
Swivel Bracket Assembly - 8" Bracket
This Smith adjustable bracket is designed to support bunk boards. Hot dip galvanizing for years of use in the harsh marine environment.
This bracket assembly uses bolster bracket-10100G and swivel bracket-10200G.
Features:
Bolster bracket: 8" bracket, 11 gauge material, 2-1/2" wide, slots 1/2" wide, swivel hole 1/2" dia., slots 2-3/4"
Swivel bracket: 11 gauge material, bunk flange 1-3/8" x 3-1/2", bunk flange holes 3/8" dia., swivel flange 2" tall x 3-1/2", swivel flange hole 1/2" dia., hole centers 2-1/2"
Overall assembly length is 9"
|
7.52 |
|
|
1-1/2" Wide Keel Base Roller Assembly f/2" - 2-1/2" Tongue
Product Description
This roller assembly supports your boat's keel for easy loading and safe transport on your trailer. It features a 4", black rubber spool roller and a galvanized steel bracket that attaches to your trailer's tongue. 2 to 2-1/2" trailer tongue.
Features:
Spool roller supports your boat's keel as it sits on the trailer
Prevents the bow from making contact with your winch
Eases loading and unloading of boat
Helps to absorb road shock while boat is being trailered
Bracket lets you bolt roller assembly onto the tongue or frame of your boat trailer
Requires 7/16" fasteners (not included)
Sturdy, 1/8" galvanized steel bracket resists corrosion
Black rubber roller delivers long-lasting performance
Made in USA
Specifications:
Roller length: 4"
Shaft diameter: 5/8"
Diameter of mounting holes (each): 7/16"
Spacing of mounting holes: 3" apart on center
Typically installed flat on the tongue of a boat trailer, this spool roller bracket assembly stabilizes the keel of the boat during trailering.
|
23.40 |
|
|
Double Slot Swivel Bolster Bracket Assembly - 13"
C.E. Smith's adjustable bracket is designed to support roller bunks. Hot dip galvanizing for years of use in the harsh marine environment. This bracket assembly uses bolster bracket-10102G and swivel bracket-10200G.
Features:
Bolster bracket: 12" bracket, 11 gauge material, 2-1/2" wide, slots 1/2" wide, swivel hole 1/2" dia., slots 4-3/4"
Swivel bracket: 11 gauge material, bunk flange 1-3/8" x 3-1/2", bunk flange holes 3/8" dia., swivel flange 2" tall x 3-1/2", swivel flange hole 1/2" dia., hole centers 2-1/2"
Overall assembly length is 13"
|
6.71 |
|
|
Bow Y-Stop - 3" x 3" - Yellow
Thermal Plasticized Rubber (TPR) is resilient, non-marking, stronger than black rubber and softer than polyurethane.
Features:
Yellow TPR
5-3/4" span
3' x 3' mount
3/8" bolt
|
9.24 |
|
|
C.E. Smith Company
C. E. Smith Company, Inc. was established as a manufacturing firm producing precision metal stampings, fabrications and assemblies for a broad variety of industries. Stainless steel boating and fishing products are sold under the SMITH TM trademark. The line includes an adjustable, completely stainless steel t-top, fiberglass electronic boxes, t-top storage bags navigation lights and antenna bracket.
|
|
|
60" Black PVC Post Guide-On & FREE Camo Wet Lands Post Guide-On Pads
This kit includes two 60" Black PVC Post Guide-Ons and two Camo Wet Lands Post Guide-On Pads. The C.E. Smith Trailer Post Guide-Ons give a clear visual marker to know you're backing, loading, or unloading your boat trailer evenly and properly to avoid costly damage. Unlike plastic guide-ons that fall apart or break with minimal impact, C.E. Smith Post Guide-Ons boats square 16 gauge steel uprights, pre-galvanized for corrosion resistance, and 2-3/8"-dia. Black PVC posts, to stand up strong season after season. The camo post-guide-on pads are used to protect the boat finish from scuffs. They are sized for a close fit on standard 2" schedule 40 PVC posts (2-3/8" actual outer diameter).
Features:
Provide a clear marker for backing, loading, or unloading your boat trailer
16 gauge square steel uprights
Pre-galvanized construction for corrosion resistance
2-3/8" black PVC posts
60" Overall Height
Mounting brackets and metal uprights allow for 19” of adjustment on each side of the trailer frame.
Pre-galvanized steel parts are stamped from a sheet of steel after it has already been galvanized
The galvanized coating is very thin (0.45 oz. on each side)
The cover-pads are made from strong polyurethane-coated 600D nylon fabric
Covers have nylon closures on each end
Open the bottom and top of the cover-pads to allow LED guide on lamps
Covers contain a 1/2" thick closed-cell polyurethane foam inner pad
Color of post guide-on covers: Camo Wet Lands
Kit Includes:
Part 27646: C.E. Smith 60" Black PVC Post Guide-On
Part 27903: C.E. Smith Post Guide-On Pad - 48" - Camo Wet Lands
Note: Check with your state Department of Transportation for restrictions regarding maximum trailer width
*Sold in pairs
|
117.56 |
|
|
60" Black PVC Post Guide-On
C.E. Smith® Trailer Post Guide-Ons give a clear visual marker to know you're backing, loading, or unloading your boat trailer evenly and properly to avoid costly damage. Unlike plastic guide-ons that fall apart or break with minimal impact, C.E. Smith Post Guide-Ons boats square 16 gauge steel uprights, pre-galvanized for corrosion resistance, and 2-3/8"-dia. Black PVC posts, to stand up strong season after season.
Features:
Provide a clear marker for backing, loading, or unloading your boat trailer
16 gauge square steel uprights
Pre-galvanized construction for corrosion resistance
2-3/8" black PVC posts
60" Overall Height
Mounting brackets and metal uprights allow for 19” of adjustment on each side of the trailer frame.
Pre-galvanized steel parts are stamped from a sheet of steel after it has already been galvanized
The galvanized coating is very thin (0.45 oz. on each side).
Note: Check with your state Department of Transportation for restrictions regarding maximum trailer width.
*Sold in pairs
WARNING: This product can expose you to chemicals including ARSENIC ,CADMIUM which are known to the State of California to cause cancer or other reproductive harm, and BERYLLIUM,COBALT METAL POWDER,NICKEL (METALLIC) which are known to the State of California to cause cancer, and Chromium (hexavalent compounds),LEAD which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
117.56 |
|
|
Black 40" Post Guide-On & FREE Camo Wet Lands Guide-On Pads
This kit includes two C.E. Smith 40" Black Post Guide-Ons and two Camo Wet Lands Post Guide-On Pads. C.E. Smith Trailer Post Guide-Ons give a clear visual marker to know you're backing, loading, or unloading your boat trailer evenly and properly to avoid costly damage. Unlike plastic guide-ons that fall apart or break with minimal impact, C.E. Smith Post Guide-Ons boats square 16 gauge steel uprights, pre-galvanized for corrosion resistance, and 2-3/8"-dia. Black PVC posts, to stand up strong season after season. While the camo post-guide-on pads, are used to protect the boat finish from scuffs. They are sized for a close fit on standard 2" schedule 40 PVC posts (2-3/8" actual outer diameter).
Features:
Provide a clear marker for backing, loading, or unloading your boat trailer
16 gauge square steel uprights
Pre-galvanized construction for corrosion resistance
2-3/8" black PVC posts
Built to last season after season
40" tall
The cover-pads are made from strong polyurethane-coated 600D nylon fabric
Covers have nylon closures on each end
Open the bottom and top of the cover-pads to allow LED guide on lamps
Covers contain a 1/2" thick closed-cell polyurethane foam inner pad
Color of post-guide-on covers: Camo Wet Lands
Kit Includes:
Part 27626: C.E. Smith Black 40" Post Guide-Ons
Part 27902: C.E. Smith Post Guide-On Pad - 36" - Camo Wet Lands
Note: Check with your state Department of Transportation for restrictions regarding maximum trailer width
*Sold in pairs
|
78.47 |
|
|
60" Post Guide-On with I-Beam Mounting Kit & FREE Camo Wet Lands Post Guide-On Pads
The kit includes two 60" Post Guide-Ons With I-Beam Mounting Kits and two Camo Wet Lands Post Guide-On Pads. These Post Guide-Ons allow you to see the location of your trailer when it's underwater. Designed for I-beam trailers and I-beam boat lifts, these guide-ons feature an innovative two-piece mounting clamp that works above or below the I-beam. Brackets will fit onto any height and virtually any width I-beam trailer frame. The camo post-guide-on pads are used to protect the boat finish from scuffs. They are sized for a close fit on standard 2" schedule 40 PVC posts (2-3/8" actual outer diameter).
Features:
Mounting hardware included
Adjusts out to 19" on each side
1-1/2" square. 16 gauge pre-galvanized steel uprights
2-3/8" diameter white PVC posts
Pre-galvanized steel parts are stamped from a sheet of steel after it has already been galvanized
The galvanized coating is very thin (0.45 oz. on each side)
The cover-pads are made from strong polyurethane-coated 600D nylon fabric
Covers have nylon closures on each end
Open the bottom and top of the cover-pads to allow LED guide on lamps
Covers contain a 1/2" thick closed-cell polyurethane foam inner pad
Color of post-guide-on covers: Camo Wet Lands
Kit Includes:
Part 27648: C.E. Smith 60" Post Guide-On With I-Beam Mounting Kit
Part 27903: C.E. Smith Post Guide-On Pad - 48" - Camo Wet Lands
Note: Check with your state Department of Transportation for restrictions regarding maximum trailer width
*Sold in pairs
|
132.52 |
|