|
Trailer Hub Kit
Hub Kits come complete and ready to install on your axel. Simply remove your old hub and replace with this pre assembled and pre greased hub. Comes with dust cap, cotter pin and wheel nuts.
Spindle: 1-3/8" - 1-1/16"
Bolt Cir: 5 x 4.5
Cap: 1750
Flange O.D.: 6-1/2"
Max Wheel: 15"
Hub I.D.: 1.98"
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp),LEAD which are known to the State of California to cause cancer, birth defects or other reproductive harm, and CADMIUM which is known to the State of California to cause cancer or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
54.36 |
|
|
Power Post 3/8 - 16 Stud
• Insulated bases are glass-reinforced Nylon
• All fasteners are galvanically compatible to reduce corrosion (ABYC E-11.16.3.2.)
• Studs are 300 series stainless steel
• Assembly includes stainless steel hex nut, split lockwasher, and flat washer
• Rated for 48VDC Maximum
• Current ratings are dependent on wire and terminal size utilized
|
6.58 |
|
|
2104 PowerBar 600AMP Cable Connector 4 x 3/8 16 Stud Terminal
Specifications:
Max Voltage: 300 V AC/48 V DC
Number of Terminal Studs: 4
Terminal Type: 3/8" - 16 Stud
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
99.19 |
|
|
2107 PowerBar 600AMP Cable Connector - 8 x 3/8" 16 Stud Terminal
Specifications:
Maximum Voltage: 300 V AC/48V DC
Number of Terminal Studs: 8
Terminal Type: 3/8" - 16 Stud
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
148.81 |
|
|
PowerBar Dual BusBar - Two 3/8"-16 Studs
Provides compact high-ampere busing with 3/8" terminal studs
Specifications:
Maximum Amperage: 200A
Maximum Voltage: 48V DC
Number of Terminal Studs: 2
Terminal Type: 3/8"-16 Stud
Bus Material: Tin-Plated Copper CDA 110/UNS11000
Weight: 0.32lb (0.15 kg)
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
15.65 |
|
|
60" Black PVC Post Guide-On
C.E. Smith® Trailer Post Guide-Ons give a clear visual marker to know you're backing, loading, or unloading your boat trailer evenly and properly to avoid costly damage. Unlike plastic guide-ons that fall apart or break with minimal impact, C.E. Smith Post Guide-Ons boats square 16 gauge steel uprights, pre-galvanized for corrosion resistance, and 2-3/8"-dia. Black PVC posts, to stand up strong season after season.
Features:
Provide a clear marker for backing, loading, or unloading your boat trailer
16 gauge square steel uprights
Pre-galvanized construction for corrosion resistance
2-3/8" black PVC posts
60" Overall Height
Mounting brackets and metal uprights allow for 19” of adjustment on each side of the trailer frame.
Pre-galvanized steel parts are stamped from a sheet of steel after it has already been galvanized
The galvanized coating is very thin (0.45 oz. on each side).
Note: Check with your state Department of Transportation for restrictions regarding maximum trailer width.
*Sold in pairs
WARNING: This product can expose you to chemicals including ARSENIC ,CADMIUM which are known to the State of California to cause cancer or other reproductive harm, and BERYLLIUM,COBALT METAL POWDER,NICKEL (METALLIC) which are known to the State of California to cause cancer, and Chromium (hexavalent compounds),LEAD which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
117.56 |
|
|
Black 40" Post Guide-On
C.E. Smith Trailer Post Guide-Ons give a clear visual marker to know you're backing, loading, or unloading your boat trailer evenly and properly to avoid costly damage. Unlike plastic guide-ons that fall apart or break with minimal impact, C.E. Smith Post Guide-Ons boats square 16 gauge steel uprights, pre-galvanized for corrosion resistance, and 2-3/8"-dia. Black PVC posts, to stand up strong season after season.
Features:
Provide a clear marker for backing, loading, or unloading your boat trailer
16 gauge square steel uprights
Pre-galvanized construction for corrosion resistance
2-3/8" black PVC posts
Built to last season after season
40" tall
Note: Check with your state Department of Transportation for restrictions regarding maximum trailer width
*Sold in pairs
WARNING: This product can expose you to chemicals including ARSENIC ,CADMIUM which are known to the State of California to cause cancer or other reproductive harm, and BERYLLIUM,COBALT METAL POWDER,NICKEL (METALLIC) which are known to the State of California to cause cancer, and Chromium (hexavalent compounds),LEAD which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
78.47 |
|
|
Black 40" Post Guide-On & FREE Camo Wet Lands Guide-On Pads
This kit includes two C.E. Smith 40" Black Post Guide-Ons and two Camo Wet Lands Post Guide-On Pads. C.E. Smith Trailer Post Guide-Ons give a clear visual marker to know you're backing, loading, or unloading your boat trailer evenly and properly to avoid costly damage. Unlike plastic guide-ons that fall apart or break with minimal impact, C.E. Smith Post Guide-Ons boats square 16 gauge steel uprights, pre-galvanized for corrosion resistance, and 2-3/8"-dia. Black PVC posts, to stand up strong season after season. While the camo post-guide-on pads, are used to protect the boat finish from scuffs. They are sized for a close fit on standard 2" schedule 40 PVC posts (2-3/8" actual outer diameter).
Features:
Provide a clear marker for backing, loading, or unloading your boat trailer
16 gauge square steel uprights
Pre-galvanized construction for corrosion resistance
2-3/8" black PVC posts
Built to last season after season
40" tall
The cover-pads are made from strong polyurethane-coated 600D nylon fabric
Covers have nylon closures on each end
Open the bottom and top of the cover-pads to allow LED guide on lamps
Covers contain a 1/2" thick closed-cell polyurethane foam inner pad
Color of post-guide-on covers: Camo Wet Lands
Kit Includes:
Part 27626: C.E. Smith Black 40" Post Guide-Ons
Part 27902: C.E. Smith Post Guide-On Pad - 36" - Camo Wet Lands
Note: Check with your state Department of Transportation for restrictions regarding maximum trailer width
*Sold in pairs
|
78.47 |
|
|
60" Black PVC Post Guide-On & FREE Camo Wet Lands Post Guide-On Pads
This kit includes two 60" Black PVC Post Guide-Ons and two Camo Wet Lands Post Guide-On Pads. The C.E. Smith Trailer Post Guide-Ons give a clear visual marker to know you're backing, loading, or unloading your boat trailer evenly and properly to avoid costly damage. Unlike plastic guide-ons that fall apart or break with minimal impact, C.E. Smith Post Guide-Ons boats square 16 gauge steel uprights, pre-galvanized for corrosion resistance, and 2-3/8"-dia. Black PVC posts, to stand up strong season after season. The camo post-guide-on pads are used to protect the boat finish from scuffs. They are sized for a close fit on standard 2" schedule 40 PVC posts (2-3/8" actual outer diameter).
Features:
Provide a clear marker for backing, loading, or unloading your boat trailer
16 gauge square steel uprights
Pre-galvanized construction for corrosion resistance
2-3/8" black PVC posts
60" Overall Height
Mounting brackets and metal uprights allow for 19” of adjustment on each side of the trailer frame.
Pre-galvanized steel parts are stamped from a sheet of steel after it has already been galvanized
The galvanized coating is very thin (0.45 oz. on each side)
The cover-pads are made from strong polyurethane-coated 600D nylon fabric
Covers have nylon closures on each end
Open the bottom and top of the cover-pads to allow LED guide on lamps
Covers contain a 1/2" thick closed-cell polyurethane foam inner pad
Color of post guide-on covers: Camo Wet Lands
Kit Includes:
Part 27646: C.E. Smith 60" Black PVC Post Guide-On
Part 27903: C.E. Smith Post Guide-On Pad - 48" - Camo Wet Lands
Note: Check with your state Department of Transportation for restrictions regarding maximum trailer width
*Sold in pairs
|
117.56 |
|
|
Trailer Hub Kit - 1-3/8" x 1-1/16" Tapered - 5 x 4-1/2" Galvanized
Features:
1-3/8" x 1-1/16" Tapered
5 x 4-1/2" Galvanized
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp),LEAD which are known to the State of California to cause cancer, birth defects or other reproductive harm, and CADMIUM which is known to the State of California to cause cancer or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
56.03 |
|
|
Adjustable Mid Mount Rod Holder - 7/8" or 1" OD - White Powder Coat Aluminum with Sleeve & Hex Key
C.E. Smith's line of white powder coated clamp-on rod holders offer a great alternative to stainless steel. These rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style.
Features:
Style: Adjustable Mid Mount
Fits rails with 7/8" or 1" measured OD
Made from Marine Grade Aluminum
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
96.68 |
|
|
Swivel Bracket Kit
Galvanized swivel top brackets provide vertical and tilting adjustments for trailer bunks.
Swivel Brackets for mounting Bunk Boards to Bolster Brackets.
Features:
Bunk flange holes 3/8" dia.
Bunk flange 1-3/8" x 3-1/2"
Swivel flange hole 1/2" dia.
Swivel flange 2" tall x 3-1/2"
2-1/2" bunk flange hole centers & 1 hole centered
10 gauge material
*Sold as kit with (2) brackets, (2) 7/16" x 1" head cap screws, and (2) 7/16" nylon lock nuts.
|
6.60 |
|
|
Center Swivel Bracket - 2-1/2"
Galvanized swivel top bracket provides vertical and tilting adjustment for trailer bunks. Swivel Bracket for mounting Bunk Boards to Bolster Brackets.
Features:
Bolt-on installation
Bunk flange holes 3/8" dia.
Bunk flange 1-3/8" x 3-1/2"
Swivel flange hole 1/2" dia.
Swivel flange 2" tall x 3-1/2"
2-1/2" bunk flange hole centers
11 gauge galvanized steel
Made in the USA
Sold individually
|
1.88 |
|
|
16' Bright Silver Pole w/ Black Spike Step Tube 1 3/8"
16' Bright Silver Pole with Black Spike Step Tube 1 3/8"
|
580.30 |
|
|
PSS Shaft Seal Maintenance & Parts Replacement Kit
FOR 1 3/8" SHAFT 2 1/4" TUBE
As with any rubber hose below waterline, the PSS bellows must be inspected
on a regular basis for any sign of wear, aging or chemical deterioration.
The PSS bellow should be replaced in six year intervals. During bellows
replacement it is recommended the o-rings & set screws in the stainless
steel rotor also be replaced.
Bellows may need to be more frequently inspected in an environment where
non-sealed batteries emit sulfuric acid. Sulfuric acid vapor will accelerate
rubber deterioration, as will an ozonater.
The Maintenance Kit includes the items you need to properly maintain your
PSS Shaft Seal. Included in the kit is one (1) PSS bellow, two (2) O-rings,
five (5) set screws, four (4) new hose clamps and an allen key.
|
108.00 |
|