SnapIt! Marine M001 Single Drink Holder for Power & Sailboats Single Drink Holder sized for canned drinks with insulated sleeves. I.D. 3.625” Overall Height 3.5”. Order to fit specific tubing size. Furnished with “U” Clamp and screws for permanent mounting if so desired.

  Redesigned to be even more practical and versatile. This economical Single Drink Holder is sized for canned drinks with insulated sleeves. New bottom pad allows unit to hold a wider variety of drinks and new top ring allows the unit to hold small mugs.               I.D. 3.375” Overall Height 3.375”.               Order to fit specific tubing size.             Can be easily moved to different locations on the boat and stored below to avoid theft.

Double Drink Holder for Power & Sailboats This Double Drink Holder is sized for canned drinks with insulated sleeves. Interior Dimension 3.625” (2.5” at narrowest point) X 7.85”. Overall Height 3.375”. Order to fit specific tubing size. Can be easily moved to different locations on the boat and stored below to avoid theft. Designed to mount at the “T” intersection of tubes on the handrails, bow or stern pulpits.

Martini Glass Holder for power boats. I.D. 2.05” Overall Height 1.6”. Order to fit specific tubing size. Can be easily moved to different locations on the boat and stored below to avoid theft.

Wine Glass Holder. I.D. 2.05” Overall Height 2.25”. Order to fit specific tubing size. Holder is designed to be adjustable for permanent mounting to angled tubes.

No ugly square boxes allowed! This versatile binnacle mounted unit is much more than just a drink holder. The Pedestal Organizer includes the features of our standard units with the added benefit of a walled center section complete with drainage holes that allows for the storage of small items such as keys, wallets, pocket change as well as larger items such as binoculars and water bottles.   Order for specific tube diameter on 9.5" center to center spacing.   For pedestal guards with 12 or 12.5" center to center spacings please see model V0027.

Holds large cell phones and smaller GPS receivers and VHF radios. Interior Dimensions 2.3”X1.7” at widest points. Overall Height 3.8”. Order to fit specific tubing size. Furnished with “U” Clamp and screws for permanent mounting if so desired.

Ritchie B-81-WM Voyager Bracket Mount Compass - Wheelmark Approved f/Lifeboat & Rescue Boat Use The Wheelmark approval is for Lifeboat and Rescue boat compasses. These compasses are also suitable for sailboats, power boats and motor sailing vessels. Features: Wheelmark Certification 3" CombiDamp Dial 12V Green LED Lighting Adjustable and Removable with Bracket and Thumbscrews Built-in Compensators to Easily Adjust for Deviation Scientifically Matched Sapphire Jewel and Hardened Steel Pivot Dial Movement Powerful DirectiveForce Magnets for Fast Heading Lock-on Movable Sun Shield High Temperature Composite Construction for Extended Operating Range 100% Repairable Exclusive 5-Year Ritchie Warranty The WM suffix signifies type approval and compliance with the Navigation requirements of Marine Equipment Directive (MED) 95/98/EC and the last modification by Directive 2011/75/EU.

Economical Single Drink Holder sized for canned drinks and 20 oz soft drink bottles.  Overall Height 3.375”   Order to fit specific tubing size.   Can be easily moved to different locations on the boat and stored below to avoid theft.

Not just a drink holder! This versatile component holds 2 canned drinks with insulated sleeves, 2 mugs, water bottles or binoculars. Interior Dimensions 3.625”(3” at narrowest point) x 7.85”. Overall Height 3.5”. Order to fit specific tubing size. Designed to be easily moved to different locations on the boat and stored below to avoid theft. Rotate clockwise to snap to tube and counter clockwise to remove.

Newbury, Massachusetts, April 15th, 2010: Technology changes rapidly and as a company building WiFi equipment, Island Consulting strives to offer the best. Since the beginning, Island Consulting has continuously made improvements to The Wirie, a long range WiFi solution for boats and RVs. The most recent development in creating a better product involves a high-end marine grade WiFi antenna. To achieve this goal, Island Consulting partnered with the well-known US antenna manufacturer, L-com.   L-com, a leading antenna manufacturer in the wireless connectivity business for over 27 years, agreed to produce a marine grade antenna exclusively for The Wirie. Designed to stringent specifications, the new Wirie antenna is an 8dBi omni-directional high performance marine antenna that features sealed collinear brass elements inside a durable UV-stable white fiberglass radome. The sealed end cap ensures no water entry and drain holes in the base help prevent moisture build-up inside the antenna.   The collaboration between Island Consulting and L-com offers the consumer an economical alternative to other true marine grade WiFi devices currently on the market.  “We believe our partnership with L-com has allowed us to turn The Wirie into the most durable and best long range WiFi solution available for boats and RVs”, states Mark Kilty from Island Consulting.  According to Karl Blomgren, L-Com's Product Manager, “L-Com is always interested in working with customers, like Island Consulting, to optimize our antennas for their applications to support new product enhancements.” Additional information about The Wirie's new antenna can be viewed at www.thewirie.com/antennadetails.html.   For $250, The Wirie enhances the customers' ability to connect to the internet from the comfort of his/her own boat or RV. The Wirie continues to offer many unique features: flexible stainless steel mounting bracket, easy to install and use software, comprehensive user manual, powerful 1000mW WiFi adapter, IP67 waterproof box, and superior customer support. The Wirie is easy to upgrade as technology continues to advance. In addition to the new antenna, the warranty of The Wirie has been extended to 1 year. The 10-day money back guarantee is still in place. Through the joint effort between Island Consulting and L-com, The Wirie is a truly marine grade WiFi solution at an affordable price. For more information, please visit www.thewirie.com.   About The Wirie: Island Consulting located in Newbury, Massachusetts, USA, manufactures and distributes The Wirie.  The Wirie was invented in the Caribbean in April 2009 to provide a cost-effective, user-friendly, long range WiFi solution for boats and RVs. It was quickly expanded to a U.S. operation to allow a larger distribution.  Island Consulting is committed to continuous improvements and to making sure every customer is extremely satisfied. Website: www.thewirie.com   About L-com: Founded in 1982, L-com Global Connectivity is a privately held corporation in Massachusetts, USA, dedicated to the design and production of a wide range of interconnect products for the electronics and data communication industries. L-com places primary product emphasis on copper and fiber cable assemblies, wireless antennas and amplifiers and accessories for modular, coaxial and computer networking applications. In June 2007, L-com acquired HyperLink Technologies of Boca Raton, Florida, USA. Website: www.L-com.com   Contact: Liesbet Collaert liesbet@thewirie.com  http://www.thewirie.com   The Wirie can now be found at CLR Marine.   http://www.clrmarine.com/462.html?m4:cat=%2FCOMMUNICATION   http://www.clrmarine.com/462.html?m4:cat=%2FCOMMUNICATION%2FAntennas   http://www.clrmarine.com/462.html?m4:cat=%2FCOMMUNICATION%2FMobile%20Broadband   http://www.clrmarine.com/m4_view_item.html?m4:item=0Wirie    

SnapIt! Marine M0016 Single Lifeline Drink Holder for Sailboats This Classic Lifeline Drink Holder is sized for canned drinks with insulated sleeves. I.D. 3.5” Overall Height 10.15”. Guaranteed not to fall off accidentally! You get One drink holder this is longer than the V0016.

  Single Drink Holder sized for mugs and canned drinks with insulated sleeves.           I.D. 3.625” Overall Height 3.5”.            Top ring is reversible.           Includes the UniClamp, which fits round tubing diameters from 3/4" (19mm) through 1 3/8" (35 mm). Plus offers the option of bulkhead mount with enclosed screws. Designed for permanent mounting.

  Holds most small flip phones with exterior dimensions less than 2.2” W X .6” D or less than 1.79” W X 1.05” D. Overall Height 3”.           Order to fit specific tubing size.           Designed to be easily moved to different locations on the boat and stored below to avoid theft. Rotate clockwise to snap to tube and counter clockwise to remove.         When checking out include the width and depth dimensions of your cell phone with any protective case in the Comments Box as this is a custom made product.  Allow three extra days for delivery.

End the search for that elusive winch handle! Snap this unique holder to the pedestal guard where it can easily be reached from either side of the boat or get two and mount them on a stanchion near the winch. Order to fit specific tubing size. Furnished with “U” Clamp and screws for permanent mounting if so desired.