|
Dinghy Specialist Splicing Kit
Kit Includes:
Ronstan splicing bag
Ceramic knife, 4" blade
Scissors, 1.75" cuts Kevlar and Dyneema material
F15 puller small, 2-4mm line
Splicing tape
5 piece needle set
Whipping twine
Small Swedish fid
|
155.52 |
|
|
Standard Splicing Kit
Kit Includes:
Ronstan splicing bag
Splicing kit, 5 fid set (4, 5.5, 7.5, 10, 13mm)
Scissors, 8", cuts Kevlar and Dyneema material
F15 puller small, 2-4 mm line
F20 puller medium, 4-6 mm line
Splicing tape
5 piece needle set
Leather palm, right hand, medium
Whipping twine
|
221.48 |
|
|
Pro Splicing Kit
Kit Includes:
Ronstan splicing bag
Splicing kit, 5 fid set (4, 5.5, 7.5, 10, 13 mm)
Scissors, 8" cuts Kevlar and Dyneema material
F15 puller small, 2-4 mm line
F25 puller, 6-8 mm line
Splicing tape
5 piece needle set
Small Swedish fid
Leather palm right hand, medium
Whipping twine
Dyneema whipping twine
|
288.14 |
|
|
Splicing Kit
These five Selma Fids are all you need to splice different sizes and types of rope or line.
Features:
Highly polished stainless steel
Fid sizes: 4, 5.5, 7.5, 10, and 13 mm
Splice double and hollow braided lines from 1/8" to 9/16"
Splice three-strand line or twine up to 1-1/8"
WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
|
66.64 |
|
|
3/8" Hose Mender In-Line Fuel Splice Kit with Stainless Steel Clamps
Whether it’s an emergency situation on the water or routine maintenance at the dock, this in-line fuel splice kit provides everything you need to repair 3/8-inch lines. Machined brass fitting paired with 2 stainless steel hose clamps.
Features:
Everything you need to mend a 3/8-inch fuel line including 2 stainless steel hose clamps
Solid machined brass with barbed ends
A centered divider ensures you get the mender evenly and securely placed between both ends of the hose
Very Versatile: Use with leaded, unleaded, ethanol-blended, and alcohol-blended fuels
|
3.77 |
|
|
Hypro 9910-Kit1703, D30 Kit
|
161.15 |
|
|
Hypro 9910-Kit-1725,Kit
910-KIT1725 Includes:
Qty 2 9910-650085 Diaphragm, Desmopan (Standard)
Qty 4 9910-320030 O-Ring
Qty 1 9910-650520 Air Chamber Diaphragm (Buna)
|
124.53 |
|
|
Hypro 9910-Kit-1916, O'Ring Kit
9910-KIT1916 Includes:
Qty 4 9910-620030 O-Ring
Qty 1 9910-620210 O-Ring
Qty 2 9910-180101 O-Ring
Qty 1 9910-550040 O-Ring
Qty 2 9910-550350 O-Ring
Qty 4 9910-390060 O-Ring
Qty 1 9910-650542 O-Ring
Qty 1 9910-390290 O-Ring
Qty 1 9910-740290 O-Ring
|
52.20 |
|
|
Hypro 9910-Kit-1919, D50 O-Ring Kit
9910-KIT1919 Includes:
Qty 1 9910-650920 O-Ring
Qty 2 9910-180101 O-Ring
Qty 5 9910-550040 O-Ring
Qty 4 9910-320030 O-Ring
Qty 1 9910-650542 O-Ring
Qty 1 9910-390290 O-Ring
Qty 1 9910-740290 O-Ring
Qty 1 9910-550350 O-Ring
Image may not represent exact kit contents
|
44.78 |
|
|
Hypro 9910-Kit-1920 VALVE KIT FOR D50
The Hypro Valve Repair Kit 9910-KIT1920 is used to replace worn or damaged valves on the D50 Diaphragm Pump.
Includes4 complete valve assemblies and 4 O-Rings.
|
168.27 |
|
|
Hypro 9910-Kit2388, D303 D403 Valve Kit
Includes: Six 9910-1889050 Valve Assembly and Six 6 9910-1140450 O-Ring
|
138.01 |
|
|
Hypro 9910-Kit2408, D252 Pump Valve Kit
|
54.74 |
|
|
Hypro 9910-Kit2423 Diaphragm Kit
9910-KIT2423 D303 D403 Diaphragm Kit
Includes: Qty 3 9910-800085 Diaphragm, Desmopan (Standard)
|
60.16 |
|
|
Hypro 9910-Kit2445 Kit Valve Repair
This repair kit is for the following pump models:
DBA110, DBS110, DBA140, DBS140
9910-KIT2445 Includes:
Qty 6 9910-680070 O-Ring
Qty 6 9910-759051 Complete valve
(Image does not represent exact kit contents)
|
220.64 |
|
|
Myers Pumps QP30KIT Pump End Assembly
Quick Prime Pump End Only, Cast Iron, Field Assembly Kit for 3HP Motor, 1-1/2"NPT Ports, 93GPM at 10' Head, 121' Head Max, Brass Impeller
Pump Kit Only, replacement Field assembly kit for 3 HP motors. Impeller type is No Lead Brass. Pump only - no Motor.
|
1076.88 |
|