46 ST BT - 2-Speed Self-Tailing Manual Winch - Black Trim The choice for uncompromised ANDERSEN performance in a manual winch, our Black Trim Self-Tailing Winch is perfect for the sailor seeking convenience and reliability. It incorporates our exclusive self-tailing mechanism that automatically accommodates a wide range of different sheet and halyard sizes allowing each winch to serve numerous onboard purposes. From raising sails to trimming sheets, these winches provide the reliable power you need for smooth sailing. As with all ANDERSEN Winches™, our Black Trim Self-Tailing winch features the exclusive stainless steel Power Rib™ drum for maximum power and extended line life. This unique drum design uses vertical ribs to firmly grip the line, requiring fewer turns to achieve the same line-holding grip when compared with conventional winch drums. The smooth surface is also corrosion free and far less abrasive to your sheets and halyards to extended the life of your lines. Specifications: Drum Ø (mm): 89 Base Ø (mm): 180 Height (mm): 202 Line Entry (mm): 90 Line Size (mm): 8-14 Weight (kg): 7.6 Gear ratio 1st speed: 2.8 : 1 Gear ratio 2nd speed: 8.4 : 1 Power ratio 1st speed: 15.5 : 1 Power ratio 2nd speed: 46.6 : 1

28 ST BT - 2-Speed Self-Tailing Manual Winch - Black Trim The choice for uncompromised ANDERSEN performance in a manual winch, our Black Trim Self-Tailing Winch is perfect for the sailor seeking convenience and reliability. It incorporates our exclusive self-tailing mechanism that automatically accommodates a wide range of different sheet and halyard sizes allowing each winch to serve numerous onboard purposes. From raising sails to trimming sheets, these winches provide the reliable power you need for smooth sailing. As with all ANDERSEN Winches™, our Black Trim Self-Tailing winch features the exclusive stainless steel Power Rib™ drum for maximum power and extended line life. This unique drum design uses vertical ribs to firmly grip the line, requiring fewer turns to achieve the same line-holding grip when compared with conventional winch drums. The smooth surface is also corrosion free and far less abrasive to your sheets and halyards to extended the life of your lines. Specifications: Drum Ø (mm): 70 Base Ø (mm): 125 Height (mm): 147 Line Entry (mm): 65 Line Size (mm): 8-14 Weight (kg): 3.8 Gear ratio 1st speed: 1.3 : 1 Gear ratio 2nd speed: 3.7 : 1 Power ratio 1st speed: 9.5 : 1 Power ratio 2nd speed: 28.6 : 1

34 ST BT - 2-Speed Self-Tailing Manual Winch - Black Trim The choice for uncompromised ANDERSEN performance in a manual winch, our Black Trim Self-Tailing Winch is perfect for the sailor seeking convenience and reliability. It incorporates our exclusive self-tailing mechanism that automatically accommodates a wide range of different sheet and halyard sizes allowing each winch to serve numerous onboard purposes. From raising sails to trimming sheets, these winches provide the reliable power you need for smooth sailing. As with all ANDERSEN Winches™, our Black Trim Self-Tailing winch features the exclusive stainless steel Power Rib™ drum for maximum power and extended line life. This unique drum design uses vertical ribs to firmly grip the line, requiring fewer turns to achieve the same line-holding grip when compared with conventional winch drums. The smooth surface is also corrosion free and far less abrasive to your sheets and halyards to extended the life of your lines. Specifications: Drum Ø (mm): 70 Base Ø (mm): 125 Height (mm): 147 Line Entry (mm): 65 Line Size (mm): 8-14 Weight (kg): 4.0 Gear ratio 1st speed: 1.3 : 1 Gear ratio 2nd speed: 4.7 : 1 Power ratio 1st speed: 9.5 : 1 Power ratio 2nd speed: 33.8 : 1

40 ST BT - 2-Speed Self-Tailing Manual Winch - Black Trim The choice for uncompromised ANDERSEN performance in a manual winch, our Black Trim Self-Tailing Winch is perfect for the sailor seeking convenience and reliability. It incorporates our exclusive self-tailing mechanism that automatically accommodates a wide range of different sheet and halyard sizes allowing each winch to serve numerous onboard purposes. From raising sails to trimming sheets, these winches provide the reliable power you need for smooth sailing. As with all ANDERSEN Winches™, our Black Trim Self-Tailing winch features the exclusive stainless steel Power Rib™ drum for maximum power and extended line life. This unique drum design uses vertical ribs to firmly grip the line, requiring fewer turns to achieve the same line-holding grip when compared with conventional winch drums. The smooth surface is also corrosion free and far less abrasive to your sheets and halyards to extended the life of your lines. Specifications: Drum Ø (mm): 75 Base Ø (mm): 152 Height (mm): 172 Line Entry (mm): 71 Line Size (mm): 8-14 Weight (kg): 4.8 Gear ratio 1st speed: 1.3 : 1 Gear ratio 2nd speed: 6.0 : 1 Power ratio 1st speed: 8.5 : 1 Power ratio 2nd speed: 39.5 : 1

40 ST FS - 2-Speed Self-Tailing Manual Winch - Full Stainless Steel If you take pride in having your yacht look its best, ANDERSEN's Full Stainless Self-Tailing Winch creates the dock-stopping appeal you desire. It combines all the convenience and power of ANDERSEN's self-tailing winch with a stunning all stainless steel look. From top to bottom the drive shaft stripper arm, self-tailing jaws, drum and upper & lower trim rings are manufactured in highest quality and beautifully polished grade 316 stainless steel. The dramatic result is a highly reflective winch that becomes a highlight of the boat and a true reflection of your yachting pride. We like to say, “Full Stainless – Beyond Good Looks.” As with all ANDERSEN Winches™, our Full Stainless Self-Tailing winch features the exclusive stainless steel Power Rib™ drum for maximum power and extended line life. This model also uses our exclusive self-tailing device that automatically accommodates a wide range of different line sizes. Materials Andersen winch drums are produced from grade 316L stainless steel, cold formed in stages during manufacture to further increase strength and hardness as it takes its final form. The resulting construction is lightweight, yet stiff and unyielding.  Drive shafts are in grade 329 duplex stainless steel. Pawls are cut from a cold pressed profile in grade 316 stainless steel and are virtually unbreakable.  The upper center stems are manufactured from aluminum bronze for ultimate durability. The combination of materials and design contribute to a lightweight, rigid final assembly that enhances. the mechanical efficiency of the winch. Andersen winces are of similar weight to winches with aluminum drums, but are far more durable.  Power Rib™ ANDERSEN Winches© feature the Power Rib™. Unlike other winches with abrasive drum surfaces, ANDERSEN winch drums have vertical ribs running up the surface. This combined with the smooth polished stainless steel gives a maximum grip and minimum wear on ropes, reducing the replacements costs of sheets and halyards. What's more, the Power Rib principle simply makes sailing more pleasurable. Fewer turns on the winch make tacking easier. Sheets can be gently eased out without harsh snatching and the risks of overrides and jammed sheets are significantly reduced. The grip provided by the ribs will remain the same year after year, unlike many other winches with an abrasive or sandpaper-like surface. Such surfaces have a tendency to wear down both ropes and themselves. Power Ratio Power Ratio is the mechanical advantage of the winch and is calculated as follows: length of handle x gear ratio         radius of drum The pull of the winch is based on the Power Ratio and not just on the physical size of the winch or the diameter of the drum. The Power Ratio is used to determine the load the winch may handle as follows:pull of handle (kg x Power Ratio = pull of winch (kg). This means that by applying a load of 10kg, using a 10" standard handle, on a Power Ratio 40:1 winch, the winch can pull 400kg, assuming that the winch is 100% efficient. This is not possible in practice as the efficiency is reduced by internal mechanical friction losses. Features Anderson winch drums incorporate the distinctive Power Rib which ensures a controlled grip on the line at all times, whether trimming or easing. The highly polished stainless steel surface minimizes vertical friction and allows the loaded rope turns to slide easily upward as the drum rotates, without the shuddering and excessive rope wear seen on winches that rely on a rough surface finish for grip.  Stainless steel roller bearings and ball bearings carry the highest drum loads to the center stem of the winch, minimizing efficiency losses due to friction.  The self tailing arm can be rotated through 360 degrees for optimum positioning (40ST and larger). Stainless steel self-tailing jaws adjust automatically to suit various rope sizes.  Andersen winches are designed for simple, straightforward installation and maintenance. Servicing is only required every two years or so, under normal use.  Specifications: Drum Ø:75mm(3-1/2") Base Ø:152mm(7-1/16") Height:174mm(8-1/4") Line Entry:71mm(3-9/16") Line Size:8-14mm(1/8 - 11/16") Weight;4.9kg(17.2lbs) Gear ratio 1st speed2.8 : 1 Gear ratio 2nd speed:8.4 : 1 Power ratio 1st speed:15.7 : 1 Power ratio 2nd speed:47.1 : 1

28 ST FS - 2-Speed Self-Tailing Manual Winch - Full Stainless Steel If you take pride in having your yacht look its best, ANDERSEN's Full Stainless Self-Tailing Winch creates the dock-stopping appeal you desire. It combines all the convenience and power of ANDERSEN's self-tailing winch with a stunning all stainless steel look. From top to bottom the drive shaft stripper arm, self-tailing jaws, drum and upper & lower trim rings are manufactured in highest quality and beautifully polished grade 316 stainless steel. The dramatic result is a highly reflective winch that becomes a highlight of the boat and a true reflection of your yachting pride. We like to say, “Full Stainless – Beyond Good Looks.” As with all ANDERSEN Winches™, our Full Stainless Self-Tailing winch features the exclusive stainless steel Power Rib™ drum for maximum power and extended line life. This model also uses our exclusive self-tailing device that automatically accommodates a wide range of different line sizes. Materials Andersen winch drums are produced from grade 316L stainless steel, cold formed in stages during manufacture to further increase strength and hardness as it takes its final form. The resulting construction is lightweight, yet stiff and unyielding.  Drive shafts are in grade 329 duplex stainless steel. Pawls are cut from a cold pressed profile in grade 316 stainless steel and are virtually unbreakable.  The upper center stems are manufactured from aluminum bronze for ultimate durability. The combination of materials and design contribute to a lightweight, rigid final assembly that enhances. the mechanical efficiency of the winch. Andersen winces are of similar weight to winches with aluminum drums, but are far more durable.  Power Rib™ ANDERSEN Winches© feature the Power Rib™. Unlike other winches with abrasive drum surfaces, ANDERSEN winch drums have vertical ribs running up the surface. This combined with the smooth polished stainless steel gives a maximum grip and minimum wear on ropes, reducing the replacements costs of sheets and halyards. What's more, the Power Rib principle simply makes sailing more pleasurable. Fewer turns on the winch make tacking easier. Sheets can be gently eased out without harsh snatching and the risks of overrides and jammed sheets are significantly reduced. The grip provided by the ribs will remain the same year after year, unlike many other winches with an abrasive or sandpaper-like surface. Such surfaces have a tendency to wear down both ropes and themselves. Power Ratio Power Ratio is the mechanical advantage of the winch and is calculated as follows: length of handle x gear ratio         radius of drum The pull of the winch is based on the Power Ratio and not just on the physical size of the winch or the diameter of the drum. The Power Ratio is used to determine the load the winch may handle as follows:pull of handle (kg x Power Ratio = pull of winch (kg). This means that by applying a load of 10kg, using a 10" standard handle, on a Power Ratio 40:1 winch, the winch can pull 400kg, assuming that the winch is 100% efficient. This is not possible in practice as the efficiency is reduced by internal mechanical friction losses. Features Anderson winch drums incorporate the distinctive Power Rib which ensures a controlled grip on the line at all times, whether trimming or easing. The highly polished stainless steel surface minimizes vertical friction and allows the loaded rope turns to slide easily upward as the drum rotates, without the shuddering and excessive rope wear seen on winches that rely on a rough surface finish for grip.  Stainless steel roller bearings and ball bearings carry the highest drum loads to the center stem of the winch, minimizing efficiency losses due to friction.  The self tailing arm can be rotated through 360 degrees for optimum positioning (40ST and larger). Stainless steel self-tailing jaws adjust automatically to suit various rope sizes.  Andersen winches are designed for simple, straightforward installation and maintenance. Servicing is only required every two years or so, under normal use.  Specifications: Drum Ø:70mm(2-3/4") Base Ø:125mm(4-15/16") Height:151mm(5-15/16") Line Entry:65mm(2-9/16") Line Size:8-14mm(1/8 - 11/16") Weight;3.9kg(8.6lbs) Gear ratio 1st speed1.3 : 1 Gear ratio 2nd speed:4.0 : 1 Power ratio 1st speed:9.5 : 1 Power ratio 2nd speed:28.6 : 1

34 ST FS - 2-Speed Self-Tailing Manual Winch - Full Stainless Steel If you take pride in having your yacht look its best, ANDERSEN's Full Stainless Self-Tailing Winch creates the dock-stopping appeal you desire. It combines all the convenience and power of ANDERSEN's self-tailing winch with a stunning all stainless steel look. From top to bottom the drive shaft stripper arm, self-tailing jaws, drum and upper & lower trim rings are manufactured in highest quality and beautifully polished grade 316 stainless steel. The dramatic result is a highly reflective winch that becomes a highlight of the boat and a true reflection of your yachting pride. We like to say, “Full Stainless – Beyond Good Looks.” As with all ANDERSEN Winches™, our Full Stainless Self-Tailing winch features the exclusive stainless steel Power Rib™ drum for maximum power and extended line life. This model also uses our exclusive self-tailing device that automatically accommodates a wide range of different line sizes. Materials Andersen winch drums are produced from grade 316L stainless steel, cold formed in stages during manufacture to further increase strength and hardness as it takes its final form. The resulting construction is lightweight, yet stiff and unyielding.  Drive shafts are in grade 329 duplex stainless steel. Pawls are cut from a cold pressed profile in grade 316 stainless steel and are virtually unbreakable.  The upper center stems are manufactured from aluminum bronze for ultimate durability. The combination of materials and design contribute to a lightweight, rigid final assembly that enhances. the mechanical efficiency of the winch. Andersen winces are of similar weight to winches with aluminum drums, but are far more durable.  Power Rib™ ANDERSEN Winches© feature the Power Rib™. Unlike other winches with abrasive drum surfaces, ANDERSEN winch drums have vertical ribs running up the surface. This combined with the smooth polished stainless steel gives a maximum grip and minimum wear on ropes, reducing the replacements costs of sheets and halyards. What's more, the Power Rib principle simply makes sailing more pleasurable. Fewer turns on the winch make tacking easier. Sheets can be gently eased out without harsh snatching and the risks of overrides and jammed sheets are significantly reduced. The grip provided by the ribs will remain the same year after year, unlike many other winches with an abrasive or sandpaper-like surface. Such surfaces have a tendency to wear down both ropes and themselves. Power Ratio Power Ratio is the mechanical advantage of the winch and is calculated as follows: length of handle x gear ratio         radius of drum The pull of the winch is based on the Power Ratio and not just on the physical size of the winch or the diameter of the drum. The Power Ratio is used to determine the load the winch may handle as follows:pull of handle (kg x Power Ratio = pull of winch (kg). This means that by applying a load of 10kg, using a 10" standard handle, on a Power Ratio 40:1 winch, the winch can pull 400kg, assuming that the winch is 100% efficient. This is not possible in practice as the efficiency is reduced by internal mechanical friction losses. Features Anderson winch drums incorporate the distinctive Power Rib which ensures a controlled grip on the line at all times, whether trimming or easing. The highly polished stainless steel surface minimizes vertical friction and allows the loaded rope turns to slide easily upward as the drum rotates, without the shuddering and excessive rope wear seen on winches that rely on a rough surface finish for grip.  Stainless steel roller bearings and ball bearings carry the highest drum loads to the center stem of the winch, minimizing efficiency losses due to friction.  The self tailing arm can be rotated through 360 degrees for optimum positioning (40ST and larger). Stainless steel self-tailing jaws adjust automatically to suit various rope sizes.  Andersen winches are designed for simple, straightforward installation and maintenance. Servicing is only required every two years or so, under normal use.  Specifications: Drum Ø:70mm(2-3/4") Base Ø:125mm(4-15/16") Height:151mm(5-15/16") Line Entry:65mm(2-9/16") Line Size:8-14mm(1/8 - 11/16") Weight;4.1kg(9.0lbs) Gear ratio 1st speed1.3 : 1 Gear ratio 2nd speed:4.7 : 1 Power ratio 1st speed:9.5 : 1 Power ratio 2nd speed:33.8 : 1

40 ST FS - 2-Speed Self-Tailing Manual Winch - Full Stainless Steel If you take pride in having your yacht look its best, ANDERSEN's Full Stainless Self-Tailing Winch creates the dock-stopping appeal you desire. It combines all the convenience and power of ANDERSEN's self-tailing winch with a stunning all stainless steel look. From top to bottom the drive shaft stripper arm, self-tailing jaws, drum and upper & lower trim rings are manufactured in highest quality and beautifully polished grade 316 stainless steel. The dramatic result is a highly reflective winch that becomes a highlight of the boat and a true reflection of your yachting pride. We like to say, “Full Stainless – Beyond Good Looks.” As with all ANDERSEN Winches™, our Full Stainless Self-Tailing winch features the exclusive stainless steel Power Rib™ drum for maximum power and extended line life. This model also uses our exclusive self-tailing device that automatically accommodates a wide range of different line sizes. Materials Andersen winch drums are produced from grade 316L stainless steel, cold formed in stages during manufacture to further increase strength and hardness as it takes its final form. The resulting construction is lightweight, yet stiff and unyielding.  Drive shafts are in grade 329 duplex stainless steel. Pawls are cut from a cold pressed profile in grade 316 stainless steel and are virtually unbreakable.  The upper center stems are manufactured from aluminum bronze for ultimate durability. The combination of materials and design contribute to a lightweight, rigid final assembly that enhances. the mechanical efficiency of the winch. Andersen winces are of similar weight to winches with aluminum drums, but are far more durable.  Power Rib™ ANDERSEN Winches© feature the Power Rib™. Unlike other winches with abrasive drum surfaces, ANDERSEN winch drums have vertical ribs running up the surface. This combined with the smooth polished stainless steel gives a maximum grip and minimum wear on ropes, reducing the replacements costs of sheets and halyards. What's more, the Power Rib principle simply makes sailing more pleasurable. Fewer turns on the winch make tacking easier. Sheets can be gently eased out without harsh snatching and the risks of overrides and jammed sheets are significantly reduced. The grip provided by the ribs will remain the same year after year, unlike many other winches with an abrasive or sandpaper-like surface. Such surfaces have a tendency to wear down both ropes and themselves. Power Ratio Power Ratio is the mechanical advantage of the winch and is calculated as follows: length of handle x gear ratio         radius of drum The pull of the winch is based on the Power Ratio and not just on the physical size of the winch or the diameter of the drum. The Power Ratio is used to determine the load the winch may handle as follows:pull of handle (kg x Power Ratio = pull of winch (kg). This means that by applying a load of 10kg, using a 10" standard handle, on a Power Ratio 40:1 winch, the winch can pull 400kg, assuming that the winch is 100% efficient. This is not possible in practice as the efficiency is reduced by internal mechanical friction losses. Features Anderson winch drums incorporate the distinctive Power Rib which ensures a controlled grip on the line at all times, whether trimming or easing. The highly polished stainless steel surface minimizes vertical friction and allows the loaded rope turns to slide easily upward as the drum rotates, without the shuddering and excessive rope wear seen on winches that rely on a rough surface finish for grip.  Stainless steel roller bearings and ball bearings carry the highest drum loads to the center stem of the winch, minimizing efficiency losses due to friction.  The self tailing arm can be rotated through 360 degrees for optimum positioning (40ST and larger). Stainless steel self-tailing jaws adjust automatically to suit various rope sizes.  Andersen winches are designed for simple, straightforward installation and maintenance. Servicing is only required every two years or so, under normal use.  Specifications: Drum Ø:75mm(2-15/16") Base Ø:152mm(6") Height:174mm(6-7/8") Line Entry:71mm(2-13/16") Line Size:8-14mm(1/8 - 11/16") Weight;4.9kg(10.8lbs) Gear ratio 1st speed1.3 : 1 Gear ratio 2nd speed:6.0 : 1 Power ratio 1st speed:8.9 : 1 Power ratio 2nd speed:40.0 : 1

12 ST FS Self-Tailing Manual Single Speed Winch - Full Stainless Power Rib™ ANDERSEN Winches feature the Power Rib™. Unlike other winches with abrasive drum surfaces, ANDERSEN winch drums have vertical ribs running up the surface. This combined with the smooth polished stainless steel gives a maximum grip and minimum wear on ropes, reducing the replacements costs of sheets and halyards. What’s more, the Power Rib principle simply makes sailing more pleasurable. Fewer turns on the winch make tacking easier. Sheets can be gently eased out without harsh snatching and the risks of overrides and jammed sheets are significantly reduced. The grip provided by the ribs will remain the same year after year, unlike many other winches with an abrasive or sandpaper-like surface. Such surfaces have a tendency to wear down both ropes and themselves. Power Ratio Power Ratio is the mechanical advantage of the winch and is calculated as follows: length of handle x gear ratio            radius of drum The pull of the winch is based on the Power Ratio and not just on the physical size of the winch or the diameter of the drum. The Power Ratio is used to determine the load the winch may handle as follows: pull of handle (kg x Power Ratio = pull of winch (kg). This means that by applying a load of 10kg, using a 10" standard handle, on a Power Ratio 40:1 winch, the winch can pull 400kg, assuming that the winch is 100% efficient. This is not possible in practice as the efficiency is reduced by internal mechanical friction losses. Specifications: Drum Ø D: 2-3/4" Base Ø B: 4-1/2" Height H: 5" Line Entry L: 1-3/4" Line Size: 5/16-9/16" Weight: 5.7lb Gear ratio 1st speed: 1.3 : 1 Power ratio 1st speed: 9.5 :1

18 ST FS Self-Tailing Manual Single Speed Winch - Full Stainless Power Rib™ ANDERSEN Winches feature the Power Rib™. Unlike other winches with abrasive drum surfaces, ANDERSEN winch drums have vertical ribs running up the surface. This combined with the smooth polished stainless steel gives a maximum grip and minimum wear on ropes, reducing the replacements costs of sheets and halyards. What’s more, the Power Rib principle simply makes sailing more pleasurable. Fewer turns on the winch make tacking easier. Sheets can be gently eased out without harsh snatching and the risks of overrides and jammed sheets are significantly reduced. The grip provided by the ribs will remain the same year after year, unlike many other winches with an abrasive or sandpaper-like surface. Such surfaces have a tendency to wear down both ropes and themselves. Power Ratio Power Ratio is the mechanical advantage of the winch and is calculated as follows: length of handle x gear ratio            radius of drum The pull of the winch is based on the Power Ratio and not just on the physical size of the winch or the diameter of the drum. The Power Ratio is used to determine the load the winch may handle as follows: pull of handle (kg x Power Ratio = pull of winch (kg). This means that by applying a load of 10kg, using a 10" standard handle, on a Power Ratio 40:1 winch, the winch can pull 400kg, assuming that the winch is 100% efficient. This is not possible in practice as the efficiency is reduced by internal mechanical friction losses. Specifications: Drum Ø D: 2-3/4" Base Ø B: 4-3/4" Height H: 5-1/4" Line Entry L: 1-15/16" Line Size: 1/8-11/16" Weight: 7.0lb Gear ratio 1st speed: 2.6 : 1 Power ratio 1st speed: 18.8 :1

50 ST FS Self-Tailing Manual 2-Speed Winch - Full Stainless Power Rib™ ANDERSEN Winches feature the Power Rib™. Unlike other winches with abrasive drum surfaces, ANDERSEN winch drums have vertical ribs running up the surface. This combined with the smooth polished stainless steel gives a maximum grip and minimum wear on ropes, reducing the replacements costs of sheets and halyards. What’s more, the Power Rib principle simply makes sailing more pleasurable. Fewer turns on the winch make tacking easier. Sheets can be gently eased out without harsh snatching and the risks of overrides and jammed sheets are significantly reduced. The grip provided by the ribs will remain the same year after year, unlike many other winches with an abrasive or sandpaper-like surface. Such surfaces have a tendency to wear down both ropes and themselves. Power Ratio Power Ratio is the mechanical advantage of the winch and is calculated as follows: length of handle x gear ratio            radius of drum The pull of the winch is based on the Power Ratio and not just on the physical size of the winch or the diameter of the drum. The Power Ratio is used to determine the load the winch may handle as follows: pull of handle (kg x Power Ratio = pull of winch (kg). This means that by applying a load of 10kg, using a 10" standard handle, on a Power Ratio 40:1 winch, the winch can pull 400kg, assuming that the winch is 100% efficient. This is not possible in practice as the efficiency is reduced by internal mechanical friction losses. Specifications: Drum Ø D: 3-1/2" Base Ø B: 7-1/16" Height H: 7-15/16" Line Entry L: 3-9/16" Line Size: 5/16-9/16" Weight: 17.2lb Gear ratio 1st speed: 2.8 : 1 Gear ratio 2nd speed: 8.8 : 1 Power ratio 1st speed: 15.7 :1 Power ratio 2nd speed: 49.3 : 1

Ultimate 757 12V 2-Speed 7" Fan - Direct Wire - Black Direct wire only. FingerSafe blade allows for maximum airflow. Two-speed options. The 757 Ultimate 12V DC fan has long been a favorite among Caribbean sailors where good boat ventilation is a must. The two-speed motor and FingerSafe blade move large masses of air throughout the boat from the V-berth to the galley. This is the fan that will let boaters enjoy their boating investment. Features: Two speeds Direct wire Comes with a permanent mounting option Long life, low power drawing motor Adjustable base and tilting head Benefits: Maximum airflow Easy to clean Easy to install Quiet, dependable operation Direct air in any direction Match any boat interior The fan stays in place in rough seas

Ultimate 757 24V 2-Speed 7" Fan - Direct Wire - Black Direct wire only. FingerSafe blade allows for maximum airflow. Two-speed options. The 757 Ultimate 24V DC fan has long been a favorite among Caribbean sailors where good boat ventilation is a must. The two-speed motor and FingerSafe blade move large masses of air throughout the boat from the V-berth to the galley. This is the fan that will let boaters enjoy their boating investment. Features: Two speeds Direct wire Comes with a permanent mounting option Long life, low power drawing motor Adjustable base and tilting head Benefits: Maximum airflow Easy to clean Easy to install Quiet, dependable operation Direct air in any direction Match any boat interior The fan stays in place in rough seas

  Take the hard work out of your sailing time with ANDERSEN's Electric Winches. They allow you to raise the sails or trim the sheets with the push of a button. If you enjoy short-handed sailing or have a large, hard-to-control mainsail or genoa, electric winches are a great choice. Easily user installed and maintained, Andersen electric winches can be installed in the same position as your current winches.     E1 Electric Self-Tailing Winches Perfect for enjoying sailing short-handed or with friends and family. ANDERSEN E1 Electric Winches are engineered with unsurpassed levels of functionality, monitoring and protection. They are available in 12 Volt and 24 Volt models providing smooth and quiet operation across a wide working load range.   Compact Motor™ Electric Winches - Above Deck & Below Deck – Variable Speed  The ANDERSEN Compact Motor™ electric winch is available in two formats for either Above Deck or Below Deck motor placement. Motor gearbox and controller are integrated into one compact unit with no extra control box necessary. Available in 12 volt and 24 volt models, Compact Motor™ electric winches operate at variable speed in proportion to the pressure applied to the push button, for smooth and quiet operation.   Electric Power Unit Upgrade ANDERSEN winches are engineered with a focus on flexibility and simplicity. Already have an existing Andersen Self-Tailing Manual Winch? Purchase a conversion kit and turn it into an Electric winch with ease, since all ANDERSEN Self-Tailing Winches, models 28ST and above are factory prepared for future change.        E1 Single Speed Electric Conversion Kits The E1 Single Speed electric motor is a high quality European engineered and manufactured series wound motor. Carefully matched with the optimal gearbox they deliver high speed at low load for fast sheeting in, and low speed at high load for safe, fine tuning when trimming. The motors are available in 12 Volt and 24 Volt models providing smooth and quiet operation across a wide working load range.    Compact Motor™ Electric Conversion Kits The uncompromising ANDERSEN Variable-speed Compact Motor™ is available in two versions; Below Deck and Above Deck, 12V or 24V, and will fit models 28ST and up. The unit is extremely easy to install and provides 30-50% less power consumption compared to a conventional electric motor.      Specials    Closeouts   Remanufactured    Rebates  

46 Self-Tailing Radial Aluminum Winch - 2 Speed The Radial winch drum’s gripping surface is shaped for each winch size and drum material and features diagonal ribs (rather than textured abrasive materials) to maximize gripping power and greatly reduce line wear. The self-tailing mechanism on the winch means that one crew member can quickly and easily trim or raise sails. Specifications: Material: Aluminum Configuration: Self-tailing Speed: 2 Drum: 100mm/ 3-7/8in Base: 184 mm/ 7-1/4in Height: 201mm/ 7-15/16in Weight: 5.2kg/ 11.5lb Line entry height: 90mm/ 3-9/16in Minimum line: 8mm/ 5/16in Maximum line: 14mm/9/16in Fastener circle: 150mm/ 5-7/8in Fasteners: 8 SH mm/ 5/16 SH in Number of fasteners: 5 Gear ratio-1: 2.30 Gear ratio-2: 9.17 Power ratio-1: 11.70 Power ration-2: 46.50 Available power: Manual