|
F25 Splicing Needle w/Puller - Large 6mm-8mm(1/4"-5/16") Line
A range of specialised rope splicing needles for sailors and riggers.
They are specifically designed for use with modern synthetic fibres and rope
constructions, in particular small line sizes where conventional fids/needles don't work.
Features:
"Pull-through" operation
Unique double needle clamps the line making it easy to pull through
Ideal for making "soft shackles"
Ideal for pulling cover plaits into the core for making tapered sheets
Sizes available for lines from 2mm (1/16") diam. to 8mm (5/16") diameter
Fixed handle with wire running around full length for maximum strength
|
23.68 |
|
|
F15 Splicing Needle w/Puller - Small 2mm-4mm(1/16"-5/32") Line
A range of specialised rope splicing needles for sailors and riggers.
They are specifically designed for use with modern synthetic fibres and rope
constructions, in particular small line sizes where conventional fids/needles don't work.
Features:
"Pull-through" operation
Unique double needle clamps the line making it easy to pull through
Ideal for making "soft shackles"
Ideal for pulling cover plaits into the core for making tapered sheets
Sizes available for lines from 2mm (1/16") diam. to 8mm (5/16") diameter
Fixed handle with wire running around full length for maximum strength
|
22.19 |
|
|
F20 Splicing Needle w/Puller - Medium 4mm-6mm(5/32"-1/4") Line
A range of specialised rope splicing needles for sailors and riggers.
They are specifically designed for use with modern synthetic fibres and rope
constructions, in particular small line sizes where conventional fids/needles don't work.
Features:
"Pull-through" operation
Unique double needle clamps the line making it easy to pull through
Ideal for making "soft shackles"
Ideal for pulling cover plaits into the core for making tapered sheets
Sizes available for lines from 2mm (1/16") diam. to 8mm (5/16") diameter
Fixed handle with wire running around full length for maximum strength
|
22.93 |
|
|
BURKS GNA6-1 1/4-5.00, CENTRIFGUAL PUMP ONLY BRONZE-FIT
Bronze Fitted Cast Iron Construction.
Base mounted Pump Only less Motor.
Ports are Inches NPT Inlet, Inches NPT Outlet.
UNSPSC Code: 40150000
|
1987.20 |
|
|
Fast Entry Cam Cleat f/1/4"-7/16" Line - 6mm-12mm
70-17 Fast Entry Cam Cleat. Features Die Cast Aluminum Cams, Delrin(tm) Ball Bearings, Computer Designed High Flare allows for easy entry at various angles. Safe Working Load 300 lbs (135kg) Line 1/4" - 7/16" (6mm - 12mm), Requires (2) #10 Flat Head Fasteners. 1.5" (38mm) Centers. Matches Competitors Center to center measurements.
|
36.07 |
|
|
"Captain Hook" Chain Snubber Small Snubber Hook for 1/4" & 5/16" Chain with 12' of 1/2" 3 Strand Nylon
The "Captain Hook" Chain Snubber can be used in a few different ways:
Use the claw and attached line to relieve tension from your windlass while anchored by snubbing the chain overboard and tying off the line to a cleat or samson post on deck
Use the snubber on deck for security to hold the chain in your anchor roller and tie off on a cleat while underway for peace of mind
Relieve the tension on the windlass (like in 1) by attaching the snubber to the chain in the anchor roller and pulling back and tying it off securely
All T-316 stainless. Version with 3-strand nylon line includes professional eye splice.
Note: Always keep the bitter end of the anchor chain secure in the windlass while using the chain snubber.
|
98.76 |
|
|
Stainless Steel Anchor Swivel for Chain Size 1/4"-5/16"
316 stainless steel swivel anchor connectors are designed to easily slide over anchor rollers, preventing snagging, minimizing wear on the bow roller and windlass. These precision, high quality swivels feature double locking pins for extra security. Can be used between anchor and chain or between chain and line.
Specifications:
Chain Size: 1/4" to 5/16"
Strength: 5500lbs
Material: Stainless Steel
Length: 3-9/16"
Width: 5/8"
|
52.51 |
|
|
ANCHOR SWIVEL SHACKLES
The use of a swivel and joining shackles to join your anchor and rode will greatly improve anchor retrieval and help ensure that the rode lays neatly into your anchor locker. Thus, they are highly recommended for use with Maxwell's automatic rope/chain series windlasses. Two sizes (6mm - 8mm/1/4" - 5/16" and 10mm - 12mm/3/8" - 7/16") are available to suit vessels up to 20 metres (65'). These robust single swivel anchor connectors, with captured pins, will not loosen under load and pull smoothly and easily over bow rollers.
|
57.60 |
|
|
Swivel Cleat Fairlead - 2-8mm(3/32-5/16") Rope Diameter
Swivel cleat bases permit easy cleating and releasing from any angle.Dead eyes contain stainless steel liners for low friction and long life. Cleating plates are heavy guage alloy for stiffness and minimum distortion under load.
Features:
360° Rotation
Small T-Cleat & Fairlead
Applications:
Sheet leads and halyards on dinghies and catamarans
Materials:
Alloy cleating arms
Grade 316 Stainless Steel fittings
|
50.53 |
|
|
ANCHOR SWIVEL SHACKLES
The use of a swivel and joining shackles to join your anchor and rode will greatly improve anchor retrieval and help ensure that the rode lays neatly into your anchor locker. Thus, they are highly recommended for use with Maxwell's automatic rope/chain series windlasses. Two sizes (6mm - 8mm/1/4" - 5/16" and 10mm - 12mm/3/8" - 7/16") are available to suit vessels up to 20 metres (65'). These robust single swivel anchor connectors, with captured pins, will not loosen under load and pull smoothly and easily over bow rollers.
|
72.96 |
|
|
Self-Locking Large Opening Shackle - 6mm Diameter - 1/4"
Features:
Self-locking large shackle forged in grade 316L stainless steel
The pin is locked into one of the indentations
No risks of loosening due to vibrations
Outstanding working and breaking loads
WLL: only for industrial applications (lifting i.e…)
CE marking
Applications:
For applications where a large opening shackle is required
Specifications:
Materials 316 stainless steel grade
Working load: (lb) 990 / (kg) 450
WLL: (lb) 660 / (kg) 300
Breaking load: (lb) 3300 / (kg) 1500
Weight: (lb) 0.06 / (g) 27
Dimensions:
A: (inch) 1 21/32" / (mm) 42
B: (inch) 1 / (mm) 25.5
C: (inch) 15/64" / (mm) 6
D: (inch) 35/64" / (mm) 14
D diameter: (inch) 15/64" / (mm) 6
E: (inch) 15/64" / (mm) 6
F: (inch) 2 9/32" / (mm) 58
G: (inch) 1 47/64" / (mm) 44
Caption:
Working Load (WL): For nautical applications
Working Load Limit (WLL): For industrial applications only. The safety factor is 5 times the breaking load.
WLL = Breaking load / 5
*Sold as an Individual
|
25.34 |
|
|
Self-Locking Allen Head Pin Bow Shackle - 6mm Diameter - 1/4"
Features:
Self-locking twisted shackle with allen head pin forged in grade 316L stainless steel
The pin is locked into one of the indentations
The head of the pin does not stick out from the shackle body and thus eliminates any risk of snagging
No risks of loosening due to vibrations
Outstanding working and breaking loads
WLL: only for industrial applications (lifting i.e…)
Applications:
Ideal to link chains and anchor
On the halyard, avoids damaging the sails
To be used when the clutter is reduced
To be used when ample room is required
Specifications:
Materials: 316 stainless steel grade
Working load: (lb) 1320 / (kg) 600
WLL: (lb) 660 / (kg) 300
Breaking load: (lb) 3300 / (kg) 1500
Weight: (lb) 0.064 / (g) 29
Dimensions:
A: (inch) 1 1/16" / (mm) 27
B: (inch) 15/32" / (mm) 12
C: (inch) 15/64" / (mm) 6
D: (inch) 15/32" / (mm) 12
D diameter: (inch) 15/64" / (mm) 6
E: (inch) 13/64" / (mm) 5
F: (inch) 3/64" / (mm) 1
M: (inch) 1 17/64" / (mm) 32
Caption:
Working Load (WL): For nautical applications
Working Load Limit (WLL): For industrial applications only. The safety factor is 5 times the breaking load.
WLL = Breaking load / 5
*Sold as an Individual
|
24.62 |
|
|
Self-Locking Allen Head Pin D Shackle - 6mm Diameter - 1/4"
Features:
Self-locking shackle with allen head pin D forged in grade 316L stainless steel
The pin is locked into one of the indentations
The head of the pin does not stick out from the shackle body and thus eliminates any risk of snagging
No risks of loosening due to vibrations
Outstanding working and breaking loads
WLL: only for industrial applications (lifting i.e…)
CE marking
Applications:
Ideal to link chains and anchor
On the halyard, avoids damaging the sails
To be used when the clutter is reduced
Specifications:
Materials: 316 stainless steel grade
Working load: (lb) 1320 / (kg) 600
WLL: (lb) 700 / (kg) 320
Breaking load: (lb) 3520 / (kg) 1600
Weight: (lb) 0.049 / (g) 22
Dimensions:
A: (inch) 3/4" / (mm) 19
B: (inch) 15/32" / (mm) 12
C: (inch) 15/64" / (mm) 6
D: (inch) 15/32" / (mm) 12
D diameter: (inch) 15/64" / (mm) 6
Caption:
Working Load (WL): For nautical applications
Working Load Limit (WLL): For industrial applications only. The safety factor is 5 times the breaking load.
WLL = Breaking load / 5
*Sold as an Individual
|
21.59 |
|
|
Eye Bolt
Stock:5/16"
Eye: 5/8"
Length: 4-5/16"
Threads:3"
Material: 304 Stainless Steel
|
25.73 |
|
|
1-1/4" Bronze In-Line Check Valve
Features:
C83600 cast bronze construction
NPT threaded ports
1/2" - 2" sizes
Suitable for use with diesel fuel or gasoline
|
58.00 |
|