FAST 2500 Top-Down Swivel The Fast 2500 top-down swivel makes an easy furling solution for your asymmetric Spinnaker. Adapt the FX+ 2500 (17.5mm inner jaw width) Gennaker/Code sail furler with the Fast 2500 top-down swivel so an asymmetric spinnaker can be used. Features: Provides easy furling Top-down furling, i.e. from top to bottom (free luff) Free rotating tack fitting No maintenance (the mechanism is highly protected)                             Same features as FX+ mechanisms (tested, strong, and quick-release attachments) Specifications: Weight: 0.46 kg

FAST 900 Top-Down Swivel The Fast 900 top-down swivel makes an easy furling solution for your asymmetric Spinnaker. Adapt the FX+ 900 (12mm inner jaw width) Gennaker/Code sail furler with the Fast 900 top-down swivel so an asymmetric spinnaker can be used. Features: Provides easy furling Top-down furling, i.e. from top to bottom (free luff) Free rotating tack fitting No maintenance (the mechanism is highly protected)                             Same features as FX+ mechanisms (tested, strong, and quick-release attachments) Specifications: Weight: 0.24 kg

FAST 1500 Top-Down Swivel The Fast 1500 top-down swivel makes an easy furling solution for your asymmetric Spinnaker. Adapt the FX+ 900/1500 (15mm inner jaw width) Gennaker/Code sail furler with the Fast 1500 top-down swivel so an asymmetric spinnaker can be used. Features: Provides easy furling Top-down furling, i.e. from top to bottom (free luff) Free rotating tack fitting No maintenance (the mechanism is highly protected)                             Same features as FX+ mechanisms (tested, strong, and quick-release attachments) Specifications: Weight: 0.24 kg

FAST 4500 Top-Down Swivel The Fast 4500 top-down swivel makes an easy furling solution for your asymmetric Spinnaker. Adapt the FX+ 4500 (19mm inner jaw width) Gennaker/Code sail furler with the Fast 4500 top-down swivel so an asymmetric spinnaker can be used. Features: Provides easy furling Top-down furling, i.e. from top to bottom (free luff) Free rotating tack fitting No maintenance (the mechanism is highly protected)                             Same features as FX+ mechanisms (tested, strong, and quick-release attachments) Specifications: Weight: 0.66 kg

FAST 7000 Top-Down Swivel The Fast 7000 top-down swivel makes an easy furling solution for your asymmetric Spinnaker. Adapt the FX+ 7000 (26mm inner jaw width) Gennaker/Code sail furler with the Fast 7000 top-down swivel so an asymmetric spinnaker can be used. Features: Provides easy furling Top-down furling, i.e. from top to bottom (free luff) Free rotating tack fitting No maintenance (the mechanism is highly protected)                             Same features as FX+ mechanisms (tested, strong, and quick-release attachments) Specifications: Weight: 1.26 kg

FX+2500 Flying Sail Furler with Ratchet Further to constructive technical exchanges with ocean racers, Facnor has developed for over 20 years a sophisticated range of Gennaker/Code Zero furlers: the FX+. These furlers are known to be light, easy to fit, and aesthetic. Also, this furler is reliable for cruising or racing. Features: Adapted to sailboat from 12 to 14m (40 to 45 ft.) Code sail surface of 100m²/ 1076ft² maximum (max 30m² / 322ft² staysail) Ratchet option Start & Go included (working both clock or anti-clockwise) Unique captive quick-release pin Possible conversion for asymmetric Spinnaker Composite/carbon housing Maintenance-free units (sealed bearings) The Standard Kit of the FX+2500 Furler Includes: A ratchet in s/s duplex enabling a temporary stop when furling in and a self-locking both clockwise and anti-clockwise (Facnor patent) One continuous line drum in anodized aluminum and CNC machined in a solid block, protected by a composite/carbon housing, low-profile drum One swivel also in anodized aluminum and CNC machined in a solid block, including a neoprene anti-impact cover with high-visibility marking One snap shackle as the bottom drum attachment (optional SSH+2500 solid sheave as an alternative) One shackle as the top swivel attachment (optional SB2500 2-to-1 block as an alternative) Offers Comfort in Sail Handling, Reliability, and Easy Manipulation: Monoblock's conception of the mechanisms for more sturdiness and long-lasting Intuitive manipulation to connect the sail to the mechanisms thanks to a fitted-in, compact, and unique captive quick-release pin Bottom drive unit with a largely dimensioned diameter for strong torque and therefore more comfortable handling Is rotation transmitted through an anti-torsion luff rope? Optional—sliding inside the luff tape and fitted with a thimble on each end (FCI2500 s-s thimbles and FRC s-s clamps are also available) Easy installation of the furling loop (s-s guide + drum notch), discover Facnor Special GRIP loops for an efficient rotation of the drum, and the removable fairleads TSL25/28 Specifications: Weight: 1.68 kg Sailboat Length (feet): 40'-45' Code Sail Area (m²): 100,00 Code Sail Area (ft²): 1076,00 Staysail Area (m²): 30,00 Staysail Area (ft²): 322,00 Safe Working Load (tons): 2,50 Standard Top Swivel Attachment: Shackle Standard Bottom Drum Attachment: Snapshackle Ratchet Option: Included Continuous Line Drum Ø: 149,00mm Spliced Furling Line Ø: 8,00mm Warranty: 3 years *Optimize the investment by converting the furler for use with an asymmetric spinnaker; just add the FAST 2500 top-down thimble.

FX+1500 Flying Sail Furler with Ratchet Further to constructive technical exchanges with ocean racers, Facnor has developed for over 20 years a sophisticated range of Gennaker/Code Zero furlers: the FX+. These furlers are known to be light, easy to fit, and aesthetic. Also, this furler is reliable for cruising or racing. Features: Adapted to sailboat from 10 to 12m (30 to 40 ft.) Code sail surface of 60m²/ 646ft² maximum (max 20m² / 215ft² staysail) Ratchet option Start & Go included (working both clock or anti-clockwise) Unique captive quick-release pin Possible conversion for asymmetric Spinnaker Composite/carbon housing Maintenance-free units (sealed bearings) The Standard Kit of the FX+1500 Furler Includes: A ratchet in s/s duplex enabling a temporary stop when furling in and a self-locking both clockwise and anti-clockwise (Facnor patent) One continuous line drum in anodized aluminum and CNC machined in a solid block, protected by a composite/carbon housing, low-profile drum One swivel also in anodized aluminum and CNC machined in a solid block, including a neoprene anti-impact cover with high-visibility marking One snap shackle as the bottom drum attachment (Optional SSH+900/1500 solid sheave as an alternative) One shackle as the top swivel attachment (optional FRX900/1500 2-to-1 friction ring as an alternative) Offers Comfort in Sail Handling, Reliability, and Easy Manipulation: Monoblock's conception of the mechanisms for more sturdiness and long-lasting Intuitive manipulation to connect the sail to the mechanisms thanks to a fitted-in, compact, and unique captive quick-release pin Bottom drive unit with a largely dimensioned diameter for strong torque and therefore more comfortable handling Is rotation transmitted through an anti-torsion luff rope? optional—sliding inside the luff tape and fitted with a thimble on each end (FCI1500 s-s thimbles and FRC s-s clamps are also available) Optimize the investment by converting the furlers for use with the asymmetric spinnaker; just add a FAST top-down thimble Specifications: Weight: 0.98 kg Sailboat Length (feet): 30'-40' Code Sail Area (m²): 60,00 Code Sail Area (ft²): 646,00 Staysail Area (m²): 20,00 Staysail Area (ft²): 215,00 Safe Working Load (tons): 1,50 Standard Top Swivel Attachment: Shackle Standard Bottom Drum Attachment: Snapshackle Ratchet Option: Included Continuous Line Drum Ø: 109,00mm Spliced Furling Line Ø: 8,00mm Warranty: 3 years *Optimize the investment by converting the furler for use with an asymmetric spinnaker; just add the FAST 1500 top-down thimble.

FX+4500 Flying Sail Furler with Ratchet Further to constructive technical exchanges with ocean racers, Facnor has developed for over 20 years a sophisticated range of Gennaker/Code Zero furlers: the FX+. These furlers are known to be light, easy to fit, and aesthetic. Also, this furler is reliable for cruising or racing. Features: Adapted to sailboat from 13 to 16m (42 to 55 ft.) Code sail surface of 140m² maximum (1500ft²) (max 50m² / 538ft² staysail) Ratchet option Start & Go included (working both clock or anti-clockwise) Unique captive quick-release pin Possible conversion for asymmetric Spinnaker Composite/carbon housing Maintenance-free units (sealed bearings) The Standard Kit of the FX+4500 Furler Includes: A ratchet in s/s duplex enabling a temporary stop when furling in and a self-locking both clockwise and anti-clockwise (Facnor patent) One continuous line drum in anodized aluminum and CNC machined in a solid block, protected by a composite/carbon housing, low-profile drum One swivel also in anodized aluminum and CNC machined in a solid block, including a neoprene anti-impact cover with high-visibility marking One snap shackle as the bottom drum attachment (optional SSH+4500 solid sheave as an alternative) One shackle as the top swivel attachment (optional SB4500 2-to-1 block as an alternative) Offers Comfort in Sail Handling, Reliability, and Easy Manipulation: Monoblock's conception of the mechanisms for more sturdiness and long-lasting Intuitive manipulation to connect the sail to the mechanisms thanks to a fitted-in, compact, and unique captive quick-release pin Bottom drive unit with a largely dimensioned diameter for strong torque and therefore more comfortable handling Is rotation transmitted through an anti-torsion luff rope? Optional—sliding inside the luff tape and fitted with a thimble on each end (FCI4500 s-s thimbles and FRC s-s clamps are also available) Easy installation of the furling loop (s-s guide + drum notch), discover Facnor Special GRIP loops for an efficient rotation of the drum, and the removable fairleads TSL25/28 Specifications: Weight: 2.40 kg Sailboat Length (feet): 42'-55' Code Sail Area (m²): 140,00 Code Sail Area (ft²): 1500,00 Staysail Area (m²): 50,00 Staysail Area (ft²): 538,00 Safe Working Load (tons): 4,50 Standard Top Swivel Attachment: Shackle Standard Bottom Drum Attachment: Snapshackle Ratchet Option: Included Continuous Line Drum Ø: 169,00mm Spliced Furling Line Ø: 10,00mm Warranty: 3 years *Optimize the investment by converting the furler for use with an asymmetric spinnaker; just add the FAST 4500 top-down thimble.

FX+7000 Flying Sail Furler with Ratchet Further to constructive technical exchanges with ocean racers, Facnor has developed for over 20 years a sophisticated range of Gennaker/Code Zero furlers: the FX+. These furlers are known to be light, easy to fit, and aesthetic. Also, this furler is reliable for cruising or racing. Features: Adapted to sailboat from 16 to 20m (55 to 70 ft.) Code sail surface of 250m² maximum (2690ft²) (max 70m² / 753ft² staysail) Ratchet option Start & Go included (working both clock or anti-clockwise) Unique captive quick-release pin Possible conversion for asymmetric Spinnaker Composite/carbon housing Maintenance-free units (sealed bearings) The Standard Kit of the FX+7000 Furler Includes: A ratchet in s/s duplex enabling a temporary stop when furling in and a self-locking both clockwise and anti-clockwise (Facnor patent) One continuous line drum in anodized aluminum and CNC machined in a solid block, protected by a composite/carbon housing, low-profile drum One swivel also in anodized aluminum and CNC machined in a solid block, including a neoprene anti-impact cover with high-visibility marking One snap shackle as the bottom drum attachment (Optional SSH+7000 solid sheave as an alternative) One shackle as the top swivel attachment (optional SB7000 2-to-1 block as an alternative) Offers Comfort in Sail Handling, Reliability, and Easy Manipulation: Monoblock's conception of the mechanisms for more sturdiness and long-lasting Intuitive manipulation to connect the sail to the mechanisms thanks to a fitted-in, compact, and unique captive quick-release pin Bottom drive unit with a largely dimensioned diameter for strong torque and therefore more comfortable handling Is rotation transmitted through an anti-torsion luff rope? optional—sliding inside the luff tape and fitted with a thimble on each end (FCI7000 s-s thimbles and FRC s-s clamps are also available) Easy installation of the furling loop (s-s guide + drum notch), discover Facnor Special GRIP loops for an efficient rotation of the drum, and the removable fairleads TSL25/28 Specifications: Weight: 23.44 kg Sailboat Length (feet): 55'-70' Code Sail Area (m²): 250,00 Code Sail Area (ft²): 2690,00 Staysail Area (m²): 70,00 Staysail Area (ft²): 753,00 Safe Working Load (tons): 7,00 Standard Top Swivel Attachment: Shackle Standard Bottom Drum Attachment: Snapshackle Ratchet Option: Included Continuous Line Drum Ø: 199,00mm Spliced Furling Line Ø: 10,00mm Warranty: 3 years *Optimize the investment by converting the furler for use with an asymmetric spinnaker; just add the FAST 7000 top-down thimble.

FX+0900 Flying Sail Furler Further to constructive technical exchanges with ocean racers, Facnor has developed for over 20 years a sophisticated range of Gennaker/Code Zero furlers: the FX+. These furlers are known to be light, easy to fit, and aesthetic. Also, this furler is reliable for cruising or racing. Features: Adapted to sailboat from 6 to 10.5m (20 to 30 ft.) Code sail surface of 30m²/ 322ft² maximum Captive quick-release pin Possible conversion for asymmetric Spinnaker Composite/carbon housing Maintenance-free units (sealed bearings) The Standard Kit of the FX+900 Furler Includes: One continuous line drum in anodized aluminum and CNC machined in a solid block, protected by a composite/carbon housing, low-profile drum One swivel also in anodized aluminum and CNC machined in a solid block, including a neoprene anti-impact cover with high-visibility marking One snap shackle as the bottom drum attachment (Optional SSH+900/1500 solid sheave as an alternative) One shackle as the top swivel attachment (optional FRX900/1500 2-to-1 friction ring as an alternative) Offers Comfort in Sail Handling, Reliability, and Easy Manipulation: Monoblock's conception of the mechanisms for more sturdiness and long-lasting Intuitive manipulation to connect the sail to the mechanisms thanks to a fitted-in, compact, and unique captive quick-release pin Bottom drive unit with a largely dimensioned diameter for strong torque and therefore more comfortable handling Is rotation transmitted through an anti-torsion luff rope? Optional—sliding inside the luff tape and fitted with a thimble on each end  Optimize the investment by converting the furlers for use with the asymmetric spinnaker; just add a FAST top-down thimble Specifications: Weight: 0.57 kg Sailboat Length (feet): 20'-30' Code Sail Area (m²): 30,00 Code Sail Area (ft²): 322,00 Staysail Area (m²): Not adapted to furl a staysail Staysail Area (ft²): Not adapted to furl a staysail Safe Working Load (tons): 0,90 Standard Top Swivel Attachment: Shackle Standard Bottom Drum Attachment: Snapshackle Ratchet Option: NOT available Continuous Line Drum Ø: 85,00mm Spliced Furling Line Ø: 6,00mm Warranty: 3 years *Optimize the investment by converting the furler for use with an asymmetric spinnaker; just add the FAST 900 top-down thimble.

1.5" Thermal Camera Top Down Riser Mounts Vertical or Upside Down for FLIR MD-Series & Raymarine T-200 Ever wanted to hand your FLIR M-Series or Raymarine T-Series upside down? Well now you can with the Seaview Top Down Riser. Made from Kingstarboard a durable weather resistant marine grade polymer. Unique Design This unique design allows you to mount your FLIR MD Series or Raymarine T200 upside down. High Strength  Made from white ABS glass filled plastic. This helps prevent the plastic from cracking in severe conditions. Ribbing is added for increased strength.

SSH+2500 Solid Sheave Block The SSH+ solid sheave is used to adjust the tack point. To sail closer to the wind even better, it is necessary to lower the sail tack. This will push forward the belly. Inversely, lift the tack, and the belly of the sail will go aft, and sailors will be able to sail further downwind. Features: Quick and safe fitting for a FX+ 2500 furler Quick release pin Smooth and quickly installed Installation as 3-to-1 or 2-to-1 Enables tightening from below the drum Possible fitting in the case of bowsprit Specifications: Weight: 0.21 kg

Furling Top Swivel The top head swivel is from machine-turned solid aluminum with stainless steel ball-bearing. Features: Drum Diameter: 25mm Sail Area: 100 square foot Break Load: 1,108kg Safe Working Load: 554kg Weight: 55g

ROKK Charge Pro Fast Charge USB-A & USB-C Socket ROKK Charge Pro is the ultimate onboard USB charger. Featuring a USB-A and USB-C charging port housed in an IPX6 waterproof design, this is the only USB-C charger on the market that remains waterproof while in use. Say hello to fast charging! The unique design charges up to 36W on 12V systems and 60W on 24V systems. This makes it ideal for charging modern laptops via the USB-C port. It's also twice as fast when charging larger tablets, designed to easily charge an iPad Pro and iPhone at the same time. Perfect for where space is at a premium, ROKK Charge Pro has a sleek, ultra-compact design with a click-and-lock lid allowing the USB to remain waterproof while in use. Constructed from premium, marine-grade materials, ROKK Charge Pro is IPX6 waterproof making it completely wash-down ready. USB – C output: 60W max on 24V system 36W max on 12V system USB – A output: 36W max The install cut-out matches those of standard USB sockets for easy retrofit or swap of an existing USB charger, allowing you to keep up with the heavier power draws of modern electronic devices. Universal: Universal fit for any USB-A or USB-C connectors  Fast charge (60W max) up to 2 devices at a time. Easy Install, using standard USB mounting hole - 29mm (1 1/8”) Washdown Proof: IPX6 waterproof with the lid closed Marine Ready: Anti-corrosion coating on the circuit board  UV resistant  316 stainless hinge and spring Electrical Information: Input voltage: 10-30V DC (12/24V System) Input current Max: 6A (10A fuse recommended) Standby power draw: 0.01W The charge cable supplied with your device (tablet, phone, action camera, etc) must be used to achieve maximum charge performance from this charger. Phones will charge at the same speed whether on a 12V or 24V input voltage system. However, a 24V system must be used to get the full 60W output suitable for fast-charging laptops.

Groco Sa-2500 2 1/2" Npp Monel Strainer  Groco- Monel Screen Water Strainer 2 1/2”