|
"Captain Hook" Chain Snubber Small Snubber Hook for 1/4" & 5/16" Chain with 12' of 1/2" 3 Strand Nylon
The "Captain Hook" Chain Snubber can be used in a few different ways:
Use the claw and attached line to relieve tension from your windlass while anchored by snubbing the chain overboard and tying off the line to a cleat or samson post on deck
Use the snubber on deck for security to hold the chain in your anchor roller and tie off on a cleat while underway for peace of mind
Relieve the tension on the windlass (like in 1) by attaching the snubber to the chain in the anchor roller and pulling back and tying it off securely
All T-316 stainless. Version with 3-strand nylon line includes professional eye splice.
Note: Always keep the bitter end of the anchor chain secure in the windlass while using the chain snubber.
|
98.76 |
|
|
"Captain Hook" Chain Snubber Small Snubber Hook Only (5/16" T-316 Stainless Steel Stock)
The "Captain Hook" Chain Snubber can be used in a few different ways:
Use the claw and attached line to relieve tension from your windlass while anchored by snubbing the chain overboard and tying off the line to a cleat or samson post on deck
Use the snubber on deck for security to hold the chain in your anchor roller and tie off on a cleat while underway for peace of mind
Relieve the tension on the windlass (like in 1) by attaching the snubber to the chain in the anchor roller and pulling back and tying it off securely
All T-316 stainless. Version with 3-strand nylon line includes professional eye splice.
Note: Always keep the bitter end of the anchor chain secure in the windlass while using the chain snubber.
|
44.59 |
|
|
"Captain Hook" Chain Snubber Large Snubber Hook for 3/8" & 1/2" Chain with 15' of 5/8" 3 Strand Nylon
The "Captain Hook" Chain Snubber can be used in a few different ways:
Use the claw and attached line to relieve tension from your windlass while anchored by snubbing the chain overboard and tying off the line to a cleat or samson post on deck
Use the snubber on deck for security to hold the chain in your anchor roller and tie off on a cleat while underway for peace of mind
Relieve the tension on the windlass (like in 1) by attaching the snubber to the chain in the anchor roller and pulling back and tying it off securely
All T-316 stainless. Version with 3-strand nylon line includes professional eye splice.
Note: Always keep the bitter end of the anchor chain secure in the windlass while using the chain snubber.
|
168.40 |
|
|
"Captain Hook" Chain Snubber Large Snubber Hook Only (1/2" T-316 Stainless Steel Stock)
The "Captain Hook" Chain Snubber can be used in a few different ways:
Use the claw and attached line to relieve tension from your windlass while anchored by snubbing the chain overboard and tying off the line to a cleat or samson post on deck
Use the snubber on deck for security to hold the chain in your anchor roller and tie off on a cleat while underway for peace of mind
Relieve the tension on the windlass (like in 1) by attaching the snubber to the chain in the anchor roller and pulling back and tying it off securely
All T-316 stainless. Version with 3-strand nylon line includes professional eye splice.
Note: Always keep the bitter end of the anchor chain secure in the windlass while using the chain snubber.
|
71.76 |
|
|
BURKS GNA6-1 1/4-5.00, CENTRIFGUAL PUMP ONLY BRONZE-FIT
Bronze Fitted Cast Iron Construction.
Base mounted Pump Only less Motor.
Ports are Inches NPT Inlet, Inches NPT Outlet.
UNSPSC Code: 40150000
|
1987.20 |
|
|
Stainless Steel Anchor Swivel for Chain Size 1/4"-5/16"
316 stainless steel swivel anchor connectors are designed to easily slide over anchor rollers, preventing snagging, minimizing wear on the bow roller and windlass. These precision, high quality swivels feature double locking pins for extra security. Can be used between anchor and chain or between chain and line.
Specifications:
Chain Size: 1/4" to 5/16"
Strength: 5500lbs
Material: Stainless Steel
Length: 3-9/16"
Width: 5/8"
|
52.51 |
|
|
March 893-10-1/4" 24V Pump W/ 1286-0002-0100
|
351.00 |
|
|
F25 Splicing Needle w/Puller - Large 6mm-8mm(1/4"-5/16") Line
A range of specialised rope splicing needles for sailors and riggers.
They are specifically designed for use with modern synthetic fibres and rope
constructions, in particular small line sizes where conventional fids/needles don't work.
Features:
"Pull-through" operation
Unique double needle clamps the line making it easy to pull through
Ideal for making "soft shackles"
Ideal for pulling cover plaits into the core for making tapered sheets
Sizes available for lines from 2mm (1/16") diam. to 8mm (5/16") diameter
Fixed handle with wire running around full length for maximum strength
|
23.68 |
|
|
Fast Entry Cam Cleat f/1/4"-7/16" Line - 6mm-12mm
70-17 Fast Entry Cam Cleat. Features Die Cast Aluminum Cams, Delrin(tm) Ball Bearings, Computer Designed High Flare allows for easy entry at various angles. Safe Working Load 300 lbs (135kg) Line 1/4" - 7/16" (6mm - 12mm), Requires (2) #10 Flat Head Fasteners. 1.5" (38mm) Centers. Matches Competitors Center to center measurements.
|
36.07 |
|
|
Splice Line Gate Kit - Aft for One Side
C. Sherman Johnson Marine's Splice Line fittings allow you to easily splice hi tech Dyneema line to standard life line fittings. The Splice Line fittings are designed to be light weight and easy on the line. Both US Sailing and ISAF now allow Dyneema/ Spectra life lines for offshore racing and Dyneema/ Spectra is also a great product for the cruising sailor that wants to replace their stainless steel life line cables. Professional splicing recommended.
These kits include everything needed to install upper Dyneema life lines without gates. For double life lines, buy 2 kits. For adding a gate, use the C. Sherman Johnson Gate Kits.
Specifications:
1 x LS-3100 Over Center Gate Hook w/ Splice Eye
1 x LS-3300 Gate Eye to Splice Eye Fitting
6' Dyneema
|
154.19 |
|
|
Splice Line Gate Kit - Midship for One Side
C. Sherman Johnson Marine's Splice Line fittings allow you to easily splice hi tech Dyneema line to standard life line fittings. The Splice Line fittings are designed to be light weight and easy on the line. Both US Sailing and ISAF now allow Dyneema/ Spectra life lines for offshore racing and Dyneema/ Spectra is also a great product for the cruising sailor that wants to replace their stainless steel life line cables. Professional splicing recommended.
These kits include everything needed to install upper Dyneema life lines without gates. For double life lines, buy 2 kits. For adding a gate, use the C. Sherman Johnson Gate Kits.
Specifications:
1 x LS-3100 Over Center Gate Hook w/ Splice Eye
1 x LS-3200 Splice Eye to Splice Eye Fitting
1 x LS-3300 Gate Eye to Splice Eye Fitting
1 x LS-3400 Adjuster w/ Splice Eye
6' Dyneema
|
202.67 |
|
|
Splice Line Large Boat Kit for Boats up to 40'
C. Sherman Johnson Marine's Splice Line fittings allow you to easily splice hi tech Dyneema line to standard life line fittings. The Splice Line fittings are designed to be light weight and easy on the line. Both US Sailing and ISAF now allow Dyneema/ Spectra life lines for offshore racing and Dyneema/ Spectra is also a great product for the cruising sailor that wants to replace their stainless steel life line cables. Professional splicing recommended.
These kits include everything needed to install upper Dyneema life lines without gates. For double life lines, buy 2 kits. For adding a gate, use the C. Sherman Johnson Gate Kits.
Specifications:
2 x LS-3600 Toggle Jaw w/ Splice Eye
2 x LS-2900 Tubular Turnbuckle w/ Splice Eye
90' Grey 1/4" (6mm) Dyneema Splicing and Install Instructions
Fid/Needle/Twine
|
383.69 |
|
|
Deck Toggle Turnbuckle to Hand Crimp Terminal for 1/8" Wire
This "T" bolt style fitting is used on decks or bulkheads. T-316 stainless
Specifications:
1/8" Wire
1/4"-28
3" adj.
|
27.36 |
|
|
Anchor Chain Claw-Hook Tensioner
The "Claw Hook" design features a shorter overall length. The claw design will grab 1/4", 5/16" and 3/8" chain. The toggled claw enables you to grab the chain quickly and easily. Two 1/4" mounting holes are provided in the base of the unit and the claw has 1-1/2" of finite adjustment. The overall length closed is adjustable between 11" and 13" with a 2-1/8" throw or quick release. The handle/lever is secured when closed with a ball type QR pin attached with a lanyard.
|
135.89 |
|
|
BURKS 37GA5-1 1/4, Centrifugal Pump 230/460v 3PH 3/4HP
Centrifugal Pump and Motor unit.
Bronze Fitted Cast Iron Construction.
Close Coupled to a 3/4 Horsepower, 3450 RPM, 230/460 Volts, 3 Phase Motor.
Ports are 1-1/2 Inches NPT Inlet, 1-1/4 Inches NPT Outlet.
Impeller Diameter is 3.81 Inches.
UNSPSC Code: 40150000
|
1460.70 |
|