RAM® 14" PVC Pipe with Single Socket Arms Specifications: Product Dimensions: Overall Length 14" Ball/Socket Size: B Size (1") Materials: High strength composite

Universal X-Grip® Cell Phone Cradle w/Double Socket Arm Consists of the universal spring loaded X-Grip® cradle and standard size composite double socket arm. The included X-Grip® cradle has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic. The spring loaded X-Grip® cradle expands and contracts, allowing for a perfect custom fit of your cell phone. The double socket arm will accommodate all 1" ball bases. The X-Grip® includes a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size. Cradle Dimensions: Minimum Width = 1.875" (Minimum Height = 4.25") Maximum Width = 3.25" (Minimum Height = 2.25") Depth = 0.875" Specs & Features Rustproof High strength composite and stainless steel construction Spring loaded cradle expands and contracts for perfect fit of your device Rubber coated tips will hold device firm and stable Socket technology allows for multiple adjustment angles and articulation of device Includes Tether for open cockpit and extreme environments Lifetime warranty Made in U.S.A. Material: Marine Grade Stainless Steel Components & High Strength Composite Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag. RAM highly recommends using the provided Tether for all open cockpit applications while using this product. Weight: 0.46 lbs.

RAM® Single Socket Arm with Octagon Button Socket  The RAP-B-200-1U consists of a socket at one end that accommodates 1" diameter balls: the other end houses octagon buttons. A tightening screw on the side of the arm enables the sockets to clamp firmly on the ball and the control. Features: Single socket arm features an opening for RAM® octagon button components Compatible with B size RAM® ball components Made of high-strength composites for durability and reliability in the most demanding environments Backed by a lifetime warranty Specifications: Ball Size: B Size (1") Weight Capacity: Standard Use: 2 lbs/Heavy-Duty Use: 1 lb  Materials: High Strength Composite Weight: 0.16 lbs

Single Socket Arm & 1/4" NPT Female Thread for 1" Balls The single socket for a B size 1_ ball that has a socket for Octagon Button products. This configuration gives you the ability to interface with the variety of Octagon Button bases, couplers and pipe mounts.

RAM Single Socket Arm w/Round Octagon Socket The RAP-B-200-1-293U consists of a socket at one end that accommodates 1" diameter balls: the other end accommodates octagon buttons. A tightening screw on the side of the arm enables the sockets to clamp firmly on the ball and the button. The High Strength Plastic Universal Plate has a 1.0"diameter Round Male Button on an Octagon Neck, connected at right angles to a 2.5" diameter Round Plate. The plate has four holes that match the universal AMPS hole pattern. Material: High Strength Composite Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag.

Level Cup™ XL w/Single Socket for B Size 1" Ball Designed for bigger insulated cups, plastic water bottles or even your reliable steel coffee cup, the Level Cup™ XL keeps your drink upright, regardless of the conditions. This kit includes a Level Cup XL that has an integrated single-socket arm. This cup holder can attach to any B-size base or RAM® Mounts B-size ball accessory. The oversized opening cradles the biggest of gulps and the adjustable bottom piece moves up and down to accommodate taller cups. The rubber feet flex to fit various sized cups as well. RAM® Mounts has refined the self-leveling action to keep your cups full.  Koozie included with purchase of this product.  Common Beverage Sizes: 12oz Cans Water Bottles Insulated Cups 32oz Containers (Nalgene, Pelican, Contingo, Hydro Flask) Material: High Strength Composite   Ball Size: 1" Rubber Ball "B" Size   Note: The "U" in the part number reflects product packaged in poly bag Compatible Dimensions: Width Range: 2.6" - 3.5" Height Range: 3.75" - 11"

Tough-Claw™ Base w/Double Socket Arm & Diamond Base Adapter The RAP-B-400-238U consists of the small Tough-Claw™ base, double socket arm and diamond base adapter. The RAM Tough-Claw™ is the perfect mounting base for quick and easy tool-less installation and removal on round, square, odd shaped rails and bars. The Tough-Claw™ can be clamped on rails from 0.625" - 1.5" outer diameter. The diamond base adapter contains the industry standard universal AMPS hole pattern, which will connect to a large variety of RAM Mount and third party cradles. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. Clamping Range (Rail/Tube Surfaces): 0.625" to 1.5" Clamping Range (Flat Surfaces): 0" to 1.14" Specifications/Features: High strength glass filled nylon construction with corrosion resistant stainless steel hardware Rubber pads provide stable, even gripping and protection of mounting surface Clamp jaw is configured for round, flat and odd shapes Quick installation and removal of Tough-Claw™ Lifetime Warranty! Made in U.S.A. Material: High Strength Composite and Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber "B" Ball Size Note: The "U" in the part number reflects product packaged in poly bag. Weight: 0.35 lbs.

Tough-Claw Small Clamp Mount w/Double Socket Arm - 1" Ball MODULAR DESIGN The rubber ball and socket design offers a secure hold with infinite options and vibration dampening for demanding environments. BEST WARRANTY The philosophy is simple—build the best products available. And so our warranty is simple too. If we built it, we guarantee it. We are confident in the quality of our products, and with our warranty, you can be too. MADE IN AMERICA The all-American staff designs, manufactures, assembles, and sells our products right here, and ships them straight to you. Clamp Range: .625" - 1.14" diameter Socket to Socket Length: 1.75" Ball Size: B Size (1") Weight Capacity: Standard Use: 2 lbs/Heavy-Duty Use: 1 lb Materials: Marine-grade aluminum/High strength composite

RAM Swing Arm w/Single Socket Pedestal Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5 inch Rubber Ball Color: Black Powder Coat

RAM Mount Large Tough-Claw Base w/Double Socket Arm & 1.5" Round Base A dapter The RAP-401-202U consists of the large Tough-Claw™ base, double socket arm and round base adapter. The RAM Tough-Claw™: is the perfect mounting base for quick and easy tool-less installation and removal on round, square, odd shaped rails and bars. The Tough-Claw™ can be clamped on rails from 1" - 2.25" outer diameter. The round base adapter contains the industry standard universal AMPS hole pattern, which will connect to a large variety of RAM Mount and third party cradles. The mount is designed with a RAM 1.5" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. Clamping Range (Rail/Tube Surfaces): 1" to 2.25" Clamping Range (Flat Surfaces): 0" to 2.2"

Medium Tough-Claw™ Base w/Double Socket Arm & 1.5" Round Base Adapter The RAP-404-202U consists of the small Tough-Claw™ base, double socket arm and round base adapter. The RAM Tough-Claw™ is the perfect mounting base for quick and easy tool-less installation and removal on round, square, odd shaped rails and bars. The Tough-Claw™ can be clamped on rails from 1" - 1.875" outer diameter. The round base adapter contains the industry standard universal AMPS hole pattern, which will connect to a large variety of RAM Mount and third party cradles. The mount is designed with a RAM 1.5" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. Clamping Range (Rail/Tube Surfaces): 1" to 1.875" Clamping Range (Flat Surfaces): 0" to 1.6" Specifications/Features: High strength glass filled nylon construction with corrosion resistant stainless steel hardware Rubber pads provide stable, even gripping and protection of mounting surface Clamp jaw is configured for round, flat and odd shapes Quick installation and removal of Tough-Claw™ Lifetime Warranty! Made in U.S.A. Material: High Strength Composite Ball Size: 1.5" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag.

Medium Tough-Claw™ Base w/Double Socket Arm & Diamond Base Adapter The RAP-B-404-238U consists of the medium Tough-Claw™ base, double socket arm and diamond base adapter. The RAM Tough-Claw™ is the perfect mounting base for quick and easy tool-less installation and removal on round, square, odd shaped rails and bars. The Tough-Claw™ can be clamped on rails from 1" to 1.875" outer diameter. The diamond base adapter contains the industry standard universal AMPS hole pattern, which will connect to a large variety of RAM Mount and third party cradles. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. Clamping Range (Rail/Tube Surfaces): 1" to 1.875" Clamping Range (Flat Surfaces): 0" to 1.6" Specifications/Features: High strength glass filled nylon construction with corrosion resistant stainless steel hardware Rubber pads provide stable, even gripping and protection of mounting surface Clamp jaw is configured for round, flat and odd shapes Quick installation and removal of Tough-Claw™ Lifetime Warranty! Made in U.S.A. Material: High Strength Composite and Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber "B" Ball Size Note: The "U" in the part number reflects product packaged in poly bag.

Universal No-Drill RAM Pod HD Vehicle Mount w/Double Socket Arm & 2.5" Round Base (AMPS Hole Pattern) Pole Length: 12" Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag.

Ram Mounts Looking for all the Ram Mount products we carry them. You can find them all right here in our Ram Mount Store Aqua Box Mount section. With everything from camera mounts to vehicle mounts including cell phone mounts, you will have plenty of choices to consider and options to choose from. Ram Mounting Systems is a quality manufacturer of all kinds of different mounts for your watercraft. You can get cell phone mounts and drink cup mounts here, along with GPS mounts and fishing rod holders. There are even iPad/iPhone/iPod mounts so you do not have to worry about having your electronics safe but close at hand.   If you have a kayak we have kayak mounts, too, and you can even do some work or surf the internet with laptop mounts to choose from. Of course, you want to make sure you choose a good marine electronics mount for your equipment, so you do not risk losing anything vital. Tablet mounts, swing arm mounts, surface mounts, and suction cup mounts are all available, and we have seat mounts, as well. You can even choose from motorcycle mounts, and rail/handle bar mounts to ensure you have everything you need your all of your future adventures.

RAM® X-Grip® Phone Mount for Wheelchair Seat Tracks This kit includes a B size RAM® diamond ball base with a universal hardware pack that accommodates the seat track on most major wheelchair brands, including Invacare, Permobil, and Quickie. With the included short single socket arm, 9" pipe extension, and medium double socket arm, connect and adjust the RAM® X-Grip® universal phone holder to your ideal position. The popular, spring-loaded RAM® X-Grip® provides a perfect fit for a wide variety of phones.  Specifications: Cradle Dimensions: Minimum Width = 1.875" (Minimum Height = 4.25") Maximum Width = 3.25" (Minimum Height = 2.25") Depth = 0.875" Included Mounting Hardware: (QTY. 2) #10-32 x 1/2" Machine Screw (QTY. 2) #10-32 T-Nut (3/8" x 5/8") (QTY. 2) #10-32 T-Nut (1/2" x 1") (QTY. 2) M4 x 12mm Machine Screw (QTY. 2) M4 x 20mm Machine Screw (QTY. 2) M4 Stainless Steel Washer (QTY. 2) M4 Nylock Nut Material: Powder Coated Marine Grade Aluminum Ball Size: B Size 1" Rubber Ball